Linux IDE Archive

• Thread Index

• AHCI and SSS
  • From: Piergiorgio Sartor
• Re: SATA hdd refuses to reallocate a sector?
  • From: Ondrej Zary
• Re: SATA hdd refuses to reallocate a sector?
  • From: Zdenek Kaspar
• Re: SATA hdd refuses to reallocate a sector?
  • From: Pavel Machek
• Re: SATA hdd refuses to reallocate a sector?
  • From: Mark Lord
• Re: SATA hdd refuses to reallocate a sector?
  • From: Pavel Machek
• Re: SATA hdd refuses to reallocate a sector?
  • From: Ondrej Zary
• Re: SATA hdd refuses to reallocate a sector?
  • From: Marcus Overhagen
• Re: SATA hdd refuses to reallocate a sector?
  • From: Mark Lord
• Re: SATA hdd refuses to reallocate a sector?
  • From: Pavel Machek
• Re: SATA hdd refuses to reallocate a sector?
  • From: Mark Lord
• Re: [PATCH] libata-zpodd: must use ata_tf_init()
  • From: Sergei Shtylyov
• [PATCH] libata-zpodd: must use ata_tf_init()
  • From: Sergei Shtylyov
• Re: SATA hdd refuses to reallocate a sector?
  • From: Pavel Machek
• Re: SATA hdd refuses to reallocate a sector?
  • From: Marcus Overhagen
• Re: SATA hdd refuses to reallocate a sector?
  • From: Pavel Machek
• SATA hdd refuses to reallocate a sector?
  • From: Pavel Machek
• [PATCH v2] AHCI: use ATA_BUSY
  • From: Sergei Shtylyov
• Re: [PATCH] ahci: use ATA_BUSY
  • From: Sergei Shtylyov
• [PATCH] ahci: use ATA_BUSY
  • From: Sergei Shtylyov
• Re: [PATCH 2/4] ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs
  • From: Tejun Heo
• Re: [PATCH 1/4] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs
  • From: Tejun Heo
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: James Bottomley
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Sergei Shtylyov
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Aaron Lu
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Tejun Heo
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Aaron Lu
• [PATCH v2] ide: Fix IDE PIO size calculation
  • From: Steven J. Hill
• Re: [PATCH] ide: Fix IDE PIO size calculation
  • From: Sergei Shtylyov
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Sergei Shtylyov
• [PATCH] ide: Fix IDE PIO size calculation
  • From: Steven J. Hill
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Aaron Lu
• [PATCH 2/4] ahci: AHCI-mode SATA patch for Intel Coleto Creek DeviceIDs
  • From: Seth Heasley
• [PATCH 1/4] ata_piix: IDE-mode SATA patch for Intel Coleto Creek DeviceIDs
  • From: Seth Heasley
• RE: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
  • From: Zhu Richard-R65037
• Re: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
  • From: Sascha Hauer
• Re: [PATCH v2] ata: cleanup SAT error translation
  • From: Tejun Heo
• [PATCH v2] ata: cleanup SAT error translation
  • From: Gwendal Grignou
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Aaron Lu
• Re: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
  • From: Shawn Guo
• RE: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
  • From: Zhu Richard-R65037
• Re: [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
  • From: Shawn Guo
• Re: [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
  • From: Shawn Guo
• RE: [v1 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
  • From: Zhu Richard-R65037
• RE: [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
  • From: Zhu Richard-R65037
• Re: [v1 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
  • From: Shawn Guo
• Re: [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
  • From: Shawn Guo
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Jiang Liu (Gerry)
• Re: [PATCH] ata: cleanup SAT error translation
  • From: Tejun Heo
• Re: [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
  • From: Tejun Heo
• Re: [PATCH V2] ahci: sata: add support for exynos5440 sata
  • From: Tejun Heo
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Tejun Heo
• Re: troubleshoot disk problems / libata error messages
  • From: Gene Heskett
• Re: troubleshoot disk problems / libata error messages
  • From: scar
• [v1 3/3] imx: ahci: enable ahci sata on imx6q platforms
  • From: Richard Zhu
• [v1 2/3] ata: ahci_platform: enable imx6q ahci sata support
  • From: Richard Zhu
• [v1 1/3] ARM: dtsi: enable ahci sata on imx6q platforms
  • From: Richard Zhu
• [PATCH V1 0/3] ahci: enable ahci sata support on imx6q
  • From: Richard Zhu
• Re: [PATCH] libata: remove dead code from libata-acpi.c
  • From: Aaron Lu
• Re: troubleshoot disk problems / libata error messages
  • From: Gene Heskett
• troubleshoot disk problems / libata error messages
  • From: scar
• [PATCH] libata: remove dead code from libata-acpi.c
  • From: Liu Jiang
• [PATCH] ata: cleanup SAT error translation
  • From: Gwendal Grignou
• [PATCH libata/for-3.10-fixes] libata: skip SRST for all SIMG [34]7x port-multipliers
  • From: Tejun Heo
• Re: [PATCH V2] ahci: sata: add support for exynos5440 sata
  • From: Girish KS
• Re: [PATCH] ahci: remove pmp link online check in FBS EH
  • From: Tejun Heo
• Re: [PATCH] ahci: remove pmp link online check in FBS EH
  • From: Liu Yu
• [PATCH] ahci: remove pmp link online check in FBS EH
  • From: Shane Huang
• Re: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
  • From: Tejun Heo
• RE: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
  • From: Huang, Shane
• Re: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
  • From: Tejun Heo
• RE: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
  • From: Huang, Shane
• Re: AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
  • From: Tejun Heo
• Re: [PATCH 2/2 v4] sata highbank: add bit-banged SGPIO driver support
  • From: Tejun Heo
• [PATCH 2/2 v4] sata highbank: add bit-banged SGPIO driver support
  • From: Mark Langsdorf
• Re: [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
  • From: Mark Langsdorf
• AHCI bug: a lockup in ahci_interrupt with fbs enabled pmp
  • From: Yu Liu
• AHCI bug?: a lockup in ahci_interrupt with fbs enabled pmp
  • From: Yu Liu
• Re: [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
  • From: Tejun Heo
• [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
  • From: Mark Langsdorf
• Re: [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
  • From: Mark Langsdorf
• Re: [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
  • From: Bjorn Helgaas
• Re: [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
  • From: Tejun Heo
• Re: [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
  • From: Mark Langsdorf
• RE: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
  • From: Alan Stern
• Re: drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type
  • From: Simon Horman
• Re: drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type
  • From: Sergei Shtylyov
• RE: [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
  • From: Huang, Shane
• Re: drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type
  • From: Tejun Heo
• Re: drivers/ata/sata_rcar.c:183:2: warning: large integer implicitly truncated to unsigned type
  • From: Simon Horman
• RE: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
  • From: Brandt, Todd E
• Re: [PATCH v4] ata: increase retry count but shorten duration for Calxeda controller
  • From: Tejun Heo
• Re: [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
  • From: Tejun Heo
• Re: [PATCH] sata_rcar: fix compilation warning in sata_rcar_thaw()
  • From: Tejun Heo
• Re: [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
  • From: Bjorn Helgaas
• [PATCH] sata_rcar: fix compilation warning in sata_rcar_thaw()
  • From: Sergei Shtylyov
• [PATCH 2/2 v2] sata highbank: add bit-banged SGPIO driver support
  • From: Mark Langsdorf
• [PATCH v4] ata: increase retry count but shorten duration for Calxeda controller
  • From: Mark Langsdorf
• Re: [PATCH v3] ata: increase retry count but shorten duration for Calxeda controller
  • From: Mark Langsdorf
• Re: [PATCH RESEND v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Sergei Shtylyov
• Re: [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
  • From: Sergei Shtylyov
• Re: [PATCH V3] ata: use pci_get_drvdata()
  • From: 'Tejun Heo'
• [PATCH V3] ata: use pci_get_drvdata()
  • From: Jingoo Han
• Re: [PATCH V2] ata: use pci_get_drvdata()
  • From: Jingoo Han
• Re: [PATCH V2] ata: use pci_get_drvdata()
  • From: 'Tejun Heo'
• [PATCH V2] ata: use pci_get_drvdata()
  • From: Jingoo Han
• Re: [PATCH] sata_rcar: fix interrupt handling
  • From: Tejun Heo
• [GIT PULL] libata fixes for v3.10-rc4
  • From: Tejun Heo
• [PATCH RESEND v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Shane Huang
• [PATCH RESEND 2/3] ahci: add AMD CZ SATA device ID
  • From: Shane Huang
• [PATCH RESEND 1/3] pci_ids: put Hudson-2 device IDs together
  • From: Shane Huang
• Re: [PATCH] sata_rcar: fix interrupt handling
  • From: Sergei Shtylyov
• Re: [PATCH] sata_rcar: fix interrupt handling
  • From: Sergei Shtylyov
• Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Jean Delvare
• Re: [PATCH] ipr: qc_fill_rtf() method should not store alternate status register
  • From: Tejun Heo
• Re: [PATCH] ata: use pci_{get,set}_drvdata()
  • From: 'Tejun Heo'
• Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Tejun Heo
• Re: [PATCH v3] ata: increase retry count but shorten duration for Calxeda controller
  • From: Tejun Heo
• Re: [PATCH] sata_rcar: fix interrupt handling
  • From: Tejun Heo
• [PATCH] ata: use pci_{get,set}_drvdata()
  • From: Jingoo Han
• Re: [PATCH] sata_rcar: fix interrupt handling
  • From: Sergei Shtylyov
• [PATCH] sata_rcar: fix interrupt handling
  • From: Sergei Shtylyov
• Re: [PATCH] ipr: qc_fill_rtf() method should not store alternate status register
  • From: Sergei Shtylyov
• Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Bjorn Helgaas
• [PATCH v3] ata: increase retry count but shorten duration for Calxeda controller
  • From: Mark Langsdorf
• Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
  • From: Sergei Shtylyov
• Re: [PATCH] ipr: qc_fill_rtf() method should not store alternate status register
  • From: Brian King
• Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Jean Delvare
• Re: [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Tejun Heo
• [PATCH v2 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Shane Huang
• Re: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Jean Delvare
• Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
  • From: Tejun Heo
• Re: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Tejun Heo
• RE: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Huang, Shane
• Re: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Jean Delvare
• Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
  • From: Clemens Ladisch
• RE: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Huang, Shane
• Re: [PATCH 1/3] pci_ids: put Hudson-2 device IDs together
  • From: Jean Delvare
• Re: [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Jean Delvare
• Re: [PATCH 1/3] pci_ids: put Hudson-2 device IDs together
  • From: Tejun Heo
• [PATCH 3/3] i2c-piix4: add AMD CZ SMBus device ID
  • From: Shane Huang
• [PATCH 2/3] ahci: add AMD CZ SATA device ID
  • From: Shane Huang
• [PATCH 1/3] pci_ids: put Hudson-2 device IDs together
  • From: Shane Huang
• Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
  • From: Tejun Heo
• Re: [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
  • From: Tejun Heo
• [PATCH 2/2] sata highbank: add bit-banged SGPIO driver support
  • From: Mark Langsdorf
• [PATCH 1/2] ahci: make ahci_transmit_led_message into a function pointer
  • From: Mark Langsdorf
• Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
  • From: Timur Tabi
• Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
  • From: Sergei Shtylyov
• Re: [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
  • From: Timur Tabi
• [PATCH v2] ata: increase retry count but shorten duration for Calxeda controller
  • From: Mark Langsdorf
• Re: [PATCH] ata_piix: add PCI IDs for Intel BayTail
  • From: Tejun Heo
• Re: [PATCH] ata: increase retry count but shorten duration for Calxeda controller
  • From: Tejun Heo
• Re: [PATCH] ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
  • From: Tejun Heo
• Re: 88SE9172 additional PCI ID: 1b4b:9172
  • From: Robert Hancock
• Re: [PATCH] ata: increase retry count but shorten duration for Calxeda controller
  • From: Mark Langsdorf
• Re: [PATCH] ata: increase retry count but shorten duration for Calxeda controller
  • From: Timur Tabi
• [PATCH] ata: increase retry count but shorten duration for Calxeda controller
  • From: Mark Langsdorf
• Re: [PATCH] ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
  • From: George Spelvin
• [PATCH] ahci: add an observed PCI ID for Marvell 88se9172 SATA controller
  • From: Tejun Heo
• [PATCH] Use observed PCI ID for Marvell 88se9172 SATA controller.
  • From: George Spelvin
• Re: 88SE9172 additional PCI ID: 1b4b:9172
  • From: Tejun Heo
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• Re: [PATCH 0/3] Optimize R-Car SATA driver
  • From: Tejun Heo
• Re: [PATCH 0/3] Optimize R-Car SATA driver
  • From: Sergei Shtylyov
• Re: 88SE9172 additional PCI ID: 1b4b:9172
  • From: George Spelvin
• Re: 88SE9172 additional PCI ID: 1b4b:9172
  • From: Tejun Heo
• Re: [PATCH 0/3] Optimize R-Car SATA driver
  • From: Tejun Heo
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Tejun Heo
• 88SE9172 additional PCI ID: 1b4b:9172
  • From: George Spelvin
• [PATCH 3/3] sata_rcar: add 'base' local variable to some functions
  • From: Sergei Shtylyov
• [PATCH 2/3] sata_rcar: correct 'sata_rcar_sht'
  • From: Sergei Shtylyov
• [PATCH 1/3] sata_rcar: kill superfluous code in sata_rcar_bmdma_fill_sg()
  • From: Sergei Shtylyov
• [PATCH 0/3] Optimize R-Car SATA driver
  • From: Sergei Shtylyov
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• [PATCH 07/24] drivers/ide/delkin_cb: Convert to module_pci_driver
  • From: Libo Chen
• Re: [PATCH] libata: do not limit R-Car SATA driver to shmobile
  • From: Tejun Heo
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Tejun Heo
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Tejun Heo
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Tejun Heo
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• Re: [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• Re: [PATCH] libata: do not limit R-Car SATA driver to shmobile
  • From: Sergei Shtylyov
• Re: [PATCH] libata: do not limit R-Car SATA driver to shmobile
  • From: Tejun Heo
• [PATCH] libata: do not limit R-Car SATA driver to shmobile
  • From: Simon Horman
• Re: [PATCH] ata: use platform_{get,set}_drvdata()
  • From: 'Tejun Heo'
• Re: [PATCH] sata_rcar: clear STOP bit in bmdma_start() method
  • From: Sergei Shtylyov
• [PATCH] ata: use platform_{get,set}_drvdata()
  • From: Jingoo Han
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Ralf Baechle
• Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
  • From: Jens Axboe
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: David Daney
• [PATCH v2] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: David Daney
• Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH] sata_rcar: clear STOP bit in bmdma_start() method
  • From: Sergei Shtylyov
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Ralf Baechle
• [PATCH] AHCI: Make distinct names for ports in /proc/interrupts /proc/interrupts
  • From: Tejun Heo
• Re: [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
  • From: Tejun Heo
• Re: [PATCH] sata_rcar: clear STOP bit in bmdma_start() method
  • From: Tejun Heo
• [PATCH 2/2] libata: Add atapi_dmadir force flag
  • From: Tejun Heo
• [PATCH 1/2] libata: make ata_exec_internal_sg honor DMADIR
  • From: Tejun Heo
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Aaro Koskinen
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: David Daney
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Vincent Pelletier
• [PATCH] ipr: qc_fill_rtf() method should not store alternate status register
  • From: Sergei Shtylyov
• [PATCH] sata_rcar: clear STOP bit in bmdma_start() method
  • From: Sergei Shtylyov
• [PATCH RESEND 1/1] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Alexander Gordeev
• [PATCH RESEND 0/1] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Alexander Gordeev
• [PATCH RESEND 1/1] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• [PATCH RESEND 0/1] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Mauro Carvalho Chehab
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Wolfram Sang
• Re: [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: Greg KH
• [PATCH] MIPS: OCTEON: Rename Kconfig CAVIUM_OCTEON_REFERENCE_BOARD to CAVIUM_OCTEON_SOC
  • From: David Daney
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Tejun Heo
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Vincent Pelletier
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Tejun Heo
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Vincent Pelletier
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Tejun Heo
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Vincent Pelletier
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Tejun Heo
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Vincent Pelletier
• Re: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
  • From: Alan Stern
• Re: [PATCH v2 1/2] ATA/SCSI subsystem resume path made fully asynchronous
  • From: Alan Stern
• RE: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
  • From: Brandt, Todd E
• Re: [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
  • From: Greg Kroah-Hartman
• [PATCH v2 2/2] Adds new device resume mode in PM core, async plus non-blocking
  • From: Brandt, Todd E
• [PATCH v2 1/2] ATA/SCSI subsystem resume path made fully asynchronous
  • From: Brandt, Todd E
• [PATCH v2 0/2] Hard disk S3 resume time optimization
  • From: Brandt, Todd E
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Tejun Heo
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Vincent Pelletier
• Re: [PATCH] Hard disk S3 resume time optimization
  • From: Tejun Heo
• Re: [PATCH] Hard disk S3 resume time optimization
  • From: Tejun Heo
• [PATCH] Hard disk S3 resume time optimization
  • From: Brandt, Todd E
• Re: [PATCH] ata_piix: add PCI IDs for Intel BayTail
  • From: Tejun Heo
• Re: [PATCH] ata_piix: add PCI IDs for Intel BayTail
  • From: Tejun Heo
• [PATCH 01/33] drivers/ata: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang
• [PATCH] ata_piix: add PCI IDs for Intel BayTail
  • From: Chew Chiau Ee
• Re: [PATCH V2 #for-3.10] libata: export ata_port port_no attribute via /sys
  • From: Hannes Reinecke
• Re: [PATCH v2] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Tejun Heo
• Re: [PATCH libata/for-3.10-fixes] libata: update "Maintained by:" tags
  • From: Jeff Garzik
• Re: [PATCH v2] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Alexander Gordeev
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Tejun Heo
• Re: [PATCH v2] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Tejun Heo
• [PATCH libata/for-3.10-fixes] libata: update "Maintained by:" tags
  • From: Tejun Heo
• Re: [PATCH V2 #for-3.10] libata: export ata_port port_no attribute via /sys
  • From: Tejun Heo
• [PATCH V2 #for-3.10] libata: export ata_port port_no attribute via /sys
  • From: David Milburn
• Re: [PATCH #for-3.10] libata: export ata_port port_no attribute via /sys
  • From: Tejun Heo
• Re: [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Vincent Pelletier
• Re: [PATCH] IDE: bugfix of IDE PIO size calculation
  • From: Sergei Shtylyov
• [PATCH] IDE: bugfix of IDE PIO size calculation
  • From: Leonid Yegoshin
• [RFC 01/42] drivers/ata: don't check resource with devm_ioremap_resource
  • From: Wolfram Sang
• Re: linx-next: inclusion request for libata for-next branch
  • From: Stephen Rothwell
• [PATCH #for-3.10] libata: export ata_port port_no attribute via /sys
  • From: David Milburn
• Re: [GIT PULL] libata maintainership update
  • From: Tejun Heo
• Re: [GIT PULL] libata maintainership update
  • From: Jeff Garzik
• [GIT PULL v2] libata maintainership update
  • From: Tejun Heo
• Re: [GIT PULL] libata maintainership update
  • From: Sergei Shtylyov
• linx-next: inclusion request for libata for-next branch
  • From: Tejun Heo
• [GIT PULL] libata maintainership update
  • From: Tejun Heo
• [PATCH v2] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Alexander Gordeev
• Re: [PATCH] ata: increase retry count but shorten duration for Calxeda controller
  • From: Timur Tabi
• Re: libata maintainership change
  • From: James Bottomley
• Re: libata maintainership change
  • From: Nicholas A. Bellinger
• Re: libata maintainership change
  • From: Chris Jones
• Re: libata maintainership change
  • From: Tejun Heo
• libata maintainership change
  • From: Jeff Garzik
• [PATCH] ata: increase retry count but shorten duration for Calxeda controller
  • From: Mark Langsdorf
• Re: [git patches] libata updates
  • From: Linus Torvalds
• Re: [PATCH] sata_highbank: Rename proc_name to the module name
  • From: Jeff Garzik
• Re: [PATCH 1/2] ata: acpi: make ata_ap_acpi_handle not block
  • From: Jeff Garzik
• Re: [PATCH #upstream] libata: export ata_port port_no attribute via /sys
  • From: David Milburn
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Jeff Garzik
• Re: [PATCH] sata_highbank: Rename proc_name to the module name
  • From: Alexander Graf
• [PATCH] sata_highbank: Rename proc_name to the module name
  • From: Robert Richter
• Re: [PATCH] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Sergei Shtylyov
• [PATCH] AHCI: Make distinct names for ports in /proc/interrupts
  • From: Alexander Gordeev
• [PATCH 2/2] ACPI/libata: Restore libata.noacpi support
  • From: Aaron Lu
• [PATCH 1/2] ata: acpi: make ata_ap_acpi_handle not block
  • From: Aaron Lu
• Re: ahci driver cannot suspend a CF card, ata_piix can
  • From: Boszormenyi Zoltan
• Re: ahci driver cannot suspend a CF card, ata_piix can
  • From: Boszormenyi Zoltan
• Re: ahci driver cannot suspend a CF card, ata_piix can
  • From: Aaron Lu
• Re: [Bug 56781] New: BUG: scheduling while atomic: modprobe/256/0x00000100
  • From: Aaron Lu
• Re: [Bug 56781] New: BUG: scheduling while atomic: modprobe/256/0x00000100
  • From: Tejun Heo
• ahci driver cannot suspend a CF card, ata_piix can
  • From: Boszormenyi Zoltan
• [PATCH V2] ahci: sata: add support for exynos5440 sata
  • From: Girish K S
• Re: [PATCH] ahci: sata: add support for exynos5440 sata
  • From: Girish KS
• Re: [PATCH] ahci: sata: add support for exynos5440 sata
  • From: Felipe Balbi
• [PATCH] ahci: sata: add support for exynos5440 sata
  • From: Girish K S
• Intel SSD: NODEV after polling detection
  • From: Frédéric Nadeau
• Re: [RFC PATCH] AHCI: Workaround for ATAPI on buggy AHCI controller
  • From: Jeff Garzik
• Re: [RFC PATCH] AHCI: Workaround for ATAPI on buggy AHCI controller
  • From: Robert Hancock
• Re: [RFC PATCH] AHCI: Workaround for ATAPI on buggy AHCI controller
  • From: Robin H. Johnson
• [RFC PATCH] AHCI: Workaround for ATAPI on buggy AHCI controller
  • From: Marc C
• Re: [PATCH] drivers: ata: rcar: use devm_ioremap_resource()
  • From: Jeff Garzik
• [PATCH] drivers: ata: rcar: use devm_ioremap_resource()
  • From: Silviu-Mihai Popescu
• Re: [PATCH v3 1/1] [libata] SCSI: really use SATL version in VPD
  • From: Jeff Garzik
• Re: [PATCH 4/6] ata: i.MX PATA: add devicetree support
  • From: Jeff Garzik
• Re: [PATCH 1/1] libata: sata_rcar: Convert to devm_ioremap_resource()
  • From: Jeff Garzik
• Re: regarding your patch "AHCI: Support multiple MSIs"
  • From: Jan Beulich
• Re: RAID barely usable on my home machine
  • From: Maik Zumstrull
• Re: regarding your patch "AHCI: Support multiple MSIs"
  • From: Jan Beulich
• Re: regarding your patch "AHCI: Support multiple MSIs"
  • From: Alexander Gordeev
• Re: regarding your patch "AHCI: Support multiple MSIs"
  • From: Jan Beulich
• Re: regarding your patch "AHCI: Support multiple MSIs"
  • From: Alexander Gordeev
• regarding your patch "AHCI: Support multiple MSIs"
  • From: Jan Beulich
• Re: [PATCH 08/10] drivers: mfd: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 08/10] drivers: mfd: use module_platform_driver_probe()
  • From: Samuel Ortiz
• Re: [PATCH] i.MX PATA cleanup and i.MX51 support
  • From: Sascha Hauer
• [Bug 14044] WARNING: at kernel/irq/manage.c:259
  • From: bugzilla-daemon
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH 3/3] PCI, scsi, ahci: Unify usages of 0x1b4b vendor ID to use PCI_VENDOR_ID_MARVELL_EXT
  • From: Jeff Garzik
• Re: [PATCH 3/3] PCI, scsi, ahci: Unify usages of 0x1b4b vendor ID to use PCI_VENDOR_ID_MARVELL_EXT
  • From: Bjorn Helgaas
• Re: [PATCH 3/3] PCI, scsi, ahci: Unify usages of 0x1b4b vendor ID to use PCI_VENDOR_ID_MARVELL_EXT
  • From: James Bottomley
• [PATCH v3 1/1] [libata] SCSI: really use SATL version in VPD
  • From: Baruch Even
• Re: [PATCH 1/1] [libata] SCSI: really use SATL version in VPD
  • From: Sergei Shtylyov
• Re: [PATCH 1/1] [libata] SCSI: really use SATL version in VPD
  • From: Baruch Even
• [PATCH 1/1] [libata] SCSI: really use SATL version in VPD
  • From: Baruch Even
• Re: [PATCH 1/1] [libata] SCSI: really use SATL version in VPD
  • From: Sergei Shtylyov
• [PATCH 1/1] [libata] SCSI: really use SATL version in VPD
  • From: Baruch Even
• Re: RAID barely usable on my home machine
  • From: Peter Maloney
• Re: RAID barely usable on my home machine
  • From: Robin Hill
• Re: RAID barely usable on my home machine
  • From: Maik Zumstrull
• Re: Strange trace in dmesg on kernel 3.8.5
  • From: Eric Valette
• Re: RAID barely usable on my home machine
  • From: Roger Heflin
• Re: Strange trace in dmesg on kernel 3.8.5
  • From: Eric Valette
• Re: Strange trace in dmesg on kernel 3.8.5
  • From: David Woodhouse
• RAID barely usable on my home machine
  • From: Maik Zumstrull
• Re: Strange trace in dmesg on kernel 3.8.5
  • From: Borislav Petkov
• Re: [PATCH 3/3] PCI, scsi, ahci: Unify usages of 0x1b4b vendor ID to use PCI_VENDOR_ID_MARVELL_EXT
  • From: Bjorn Helgaas
• Re: [PATCH 1/1] libata: sata_rcar: Convert to devm_ioremap_resource()
  • From: Sergei Shtylyov
• Re: [PATCH 5/6] ARM: i.MX5: Add PATA and SRTC clocks
  • From: Shawn Guo
• [PATCH 1/1] libata: sata_rcar: Convert to devm_ioremap_resource()
  • From: Sachin Kamat
• [PATCH 2/6] ata: i.MX PATA: cleanup error path
  • From: Sascha Hauer
• [PATCH 4/6] ata: i.MX PATA: add devicetree support
  • From: Sascha Hauer
• [PATCH 5/6] ARM: i.MX5: Add PATA and SRTC clocks
  • From: Sascha Hauer
• [PATCH 1/6] ata: i.MX PATA: Use devm_clk_get
  • From: Sascha Hauer
• [PATCH 3/6] ata: i.MX PATA: use void __iomem * for regs
  • From: Sascha Hauer
• [PATCH 6/6] ARM: i.MX51: Add PATA support
  • From: Sascha Hauer
• [PATCH] i.MX PATA cleanup and i.MX51 support
  • From: Sascha Hauer
• Re: [PATCH] fsl/sata: create a sysfs entry for rx water mark
  • From: Jeff Garzik
• Re: [PATCH] pata_at32: use module_platform_driver_probe()
  • From: Jeff Garzik
• Re: [PATCH] libata: acpi: remove redundent code for power resource handling
  • From: Jeff Garzik
• Re: [PATCH RFC 1/1] AHCI: Optimize interrupt processing
  • From: Jeff Garzik
• Re: [patch] pata_legacy: bogus clock in opti82c46x_set_piomode()
  • From: Jeff Garzik
• Re: [PATCH] drivers: ata: Use resource_size function
  • From: Jeff Garzik
• Re: [PATCH] sata_highbank: make ahci_highbank_pm_ops static
  • From: Jeff Garzik
• Re: ata: HDIO_DRIVE_* ioctl() Linux 3.9 regression
  • From: Jeff Garzik
• Re: [PATCH] libata: fix DMA to stack in reading devslp_timing parameters
  • From: Jeff Garzik
• Re: [PATCH v3] ata: Fix DVD not dectected at some Haswell platforms
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata: Use integer return value for atapi_command_packet_set
  • From: Jeff Garzik
• Re: [PATCH] libata: fix DMA to stack in reading devslp_timing parameters
  • From: David Woodhouse
• Re: [PATCH RFC 1/1] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• RE: [PATCH] libata: fix DMA to stack in reading devslp_timing parameters
  • From: Huang, Shane
• [PATCH v3] [libata] Fix HDIO_DRIVE_CMD ioctl sense data check
  • From: Gwendal Grignou
• Re: [PATCH v2] [libata] Fix HDIO_DRIVE_CMD ioctl sense data check
  • From: Sergei Shtylyov
• Re: [PATCH v2] [libata] Fix HDIO_DRIVE_CMD ioctl sense data check
  • From: Krzysztof Mazur
• [PATCH v2] [libata] Fix HDIO_DRIVE_CMD ioctl sense data check
  • From: Gwendal Grignou
• [PATCH v2] [libata] Fix HDIO_DRIVE_CMD ioctl sense data check
  • From: Gwendal Grignou
• Re: [PATCH] [libata] Fix HDIO_DRIVE_CMD ioctl sense data check
  • From: Gwendal Grignou
• [PATCH] [libata] Fix HDIO_DRIVE_CMD ioctl sense data check
  • From: Gwendal Grignou
• Re: [PATCH] [libata] Fix HDIO_DRIVE_CMD ioctl sense data check
  • From: Krzysztof Mazur
• Re: ata: HDIO_DRIVE_* ioctl() Linux 3.9 regression
  • From: Gwendal Grignou
• [PATCH] libata: fix DMA to stack in reading devslp_timing parameters
  • From: David Woodhouse
• [PATCH] Updated PowerTOP AHCI ALPM accounting for Device Sleep.
  • From: David Woodhouse
• Re: [PATCH v12 0/5] block layer runtime pm
  • From: Aaron Lu
• Re: ata: HDIO_DRIVE_* ioctl() Linux 3.9 regression
  • From: Krzysztof Mazur
• RE: ata: HDIO_DRIVE_* ioctl() Linux 3.9 regression
  • From: Ronald
• Re: [PATCH v3] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• ata: HDIO_DRIVE_* ioctl() Linux 3.9 regression
  • From: Krzysztof Mazur
• Re: [PATCH v12 0/5] block layer runtime pm
  • From: Jens Axboe
• [git patches] libata minor updates
  • From: Jeff Garzik
• [PATCH v12 1/5] block: add a flag to identify PM request
  • From: Aaron Lu
• [PATCH v12 4/5] block: implement runtime pm strategy
  • From: Aaron Lu
• [PATCH v12 5/5] sd: change to auto suspend mode
  • From: Aaron Lu
• [PATCH v12 3/5] block: add runtime pm helpers
  • From: Aaron Lu
• [PATCH v12 2/5] scsi: use REQ_PM in sd's runtime suspend operation
  • From: Aaron Lu
• [PATCH v12 0/5] block layer runtime pm
  • From: Aaron Lu
• Re: [PATCH RESEND v11 0/4] block layer runtime pm
  • From: Aaron Lu
• Re: [PATCH RESEND v11 0/4] block layer runtime pm
  • From: Jens Axboe
• Libata pull request ?
  • From: Sander Eikelenboom
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH v2 3/8] drivers: char: use module_platform_driver_probe()
  • From: Herbert Xu
• Re: [PATCH v2 3/8] drivers: char: use module_platform_driver_probe()
  • From: Herbert Xu
• Re: [PATCH v2 3/8] drivers: char: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Wrong NCQ blacklist at libata for Maxtor DiamondMax 10
  • From: Noone Nowhere
• Wrong NCQ blacklist at libata for Maxtor DiamondMax 10
  • From: Noone Nowhere
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Geert Uytterhoeven
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH] sata_highbank: make ahci_highbank_pm_ops static
  • From: Jingoo Han
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH v2 2/8] drivers: ata: use module_platform_driver_probe()
  • From: Jingoo Han
• Re: [PATCH v2 6/8] drivers: mfd: use module_platform_driver_probe()
  • From: Jingoo Han
• [PATCH 0/2] -- Fix block layer hang on writing DVD
  • From: Shan Hai
• [PATCH 2/2] libata: Set max sector to 65535 for Slimtype DVD A DS8A8SH drive
  • From: Shan Hai
• [PATCH 1/2] libata: Use integer return value for atapi_command_packet_set
  • From: Shan Hai
• [PATCH] drivers: ata: Use resource_size function
  • From: Alexandru Gheorghiu
• [PATCH] drivers: ata: use resource_size()
  • From: Silviu-Mihai Popescu
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Re: [PATCH v2 8/8] drivers: misc: use module_platform_driver_probe()
  • From: Greg Kroah-Hartman
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• RE: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: H Hartley Sweeten
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH RESEND v11 1/4] block: add a flag to identify PM request
  • From: Aaron Lu
• [PATCH RESEND v11 3/4] block: implement runtime pm strategy
  • From: Aaron Lu
• [PATCH RESEND v11 2/4] block: add runtime pm helpers
  • From: Aaron Lu
• [PATCH RESEND v11 4/4] sd: change to auto suspend mode
  • From: Aaron Lu
• [PATCH RESEND v11 0/4] block layer runtime pm
  • From: Aaron Lu
• Re: [PATCH v2 4/8] drivers: input: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH v2 4/8] drivers: input: use module_platform_driver_probe()
  • From: Dmitry Torokhov
• Re: [PATCH v2 1/8] drivers: media: use module_platform_driver_probe()
  • From: Guennadi Liakhovetski
• [PATCH v2 0/8] Use module_platform_driver_probe() part 2
  • From: Fabio Porcedda
• [PATCH v2 1/8] drivers: media: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH v2 3/8] drivers: char: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH v2 2/8] drivers: ata: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH v2 4/8] drivers: input: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH v2 6/8] drivers: mfd: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH v2 5/8] drivers: memory: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH v2 7/8] drivers: video: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH v2 8/8] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 04/10] drivers: hwmon: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 01/10] drivers: media: use module_platform_driver_probe()
  • From: Fabio Porcedda
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Sascha Hauer
• Re: [PATCH 04/10] drivers: hwmon: use module_platform_driver_probe()
  • From: Guenter Roeck
• Re: [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Arnd Bergmann
• Re: [PATCH 01/10] drivers: media: use module_platform_driver_probe()
  • From: Guennadi Liakhovetski
• [PATCH 01/10] drivers: media: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 02/10] drivers: ata: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 03/10] drivers: char: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 04/10] drivers: hwmon: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 07/10] drivers: memory: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 06/10] drivers: input: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 08/10] drivers: mfd: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 05/10] drivers: ide: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 09/10] drivers: video: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 10/10] drivers: misc: use module_platform_driver_probe()
  • From: Fabio Porcedda
• [PATCH 00/10] Use module_platform_driver_probe() part 2
  • From: Fabio Porcedda
• Re: [PATCH v3] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Aaron Lu
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Simeon Bird
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Aaron Lu
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Simeon Bird
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Aaron Lu
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Robert Hancock
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Peter Dons Tychsen
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Mark Lord
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Alan Stern
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Aaron Lu
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: James Bottomley
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Aaron Lu
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Aaron Lu
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Peter Dons Tychsen
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Robert Hancock
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Alan Stern
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: James Bottomley
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Robert Hancock
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: James Bottomley
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Aaron Lu
• [patch] pata_legacy: bogus clock in opti82c46x_set_piomode()
  • From: Dan Carpenter
• Re: STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: James Bottomley
• STANDBY IMMEDIATE failed on NVIDIA MCP5x controllers when system suspend
  • From: Aaron Lu
• errors / ata lockups with Marvel 88SE9123
  • From: Jason Newton
• Re: [PATCH 3/3] ide: gayle: use module_platform_driver_probe()
  • From: David Miller
• Re: [PATCH 2/3] ide: tx4939ide: use module_platform_driver_probe()
  • From: David Miller
• Re: [PATCH 1/3] ide: tx4938ide: use module_platform_driver_probe()
  • From: David Miller
• Disk shock protection interferes with standby timers, please advise
  • From: Elias Oltmanns
• [PATCH #upstream] libata: export ata_port port_no attribute via /sys
  • From: David Milburn
• [PATCH RFC 1/1] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• [PATCH RFC 0/1] AHCI: Optimize interrupt processing
  • From: Alexander Gordeev
• Re: [PATCH #upstream] libata: export local port number through /sys
  • From: Hannes Reinecke
• [PATCH v3] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• Re: [PATCH #upstream] libata: export local port number through /sys
  • From: David Milburn
• Re: [PATCH #upstream] libata: export local port number through /sys
  • From: Hannes Reinecke
• Re: [PATCH v3] ata: Fix DVD not dectected at some Haswell platforms
  • From: Borislav Petkov
• [PATCH] libata: acpi: remove redundent code for power resource handling
  • From: Aaron Lu
• [PATCH v11 2/4] block: add runtime pm helpers
  • From: Aaron Lu
• [PATCH v11 3/4] block: implement runtime pm strategy
  • From: Aaron Lu
• [PATCH v11 1/4] block: add a flag to identify PM request
  • From: Aaron Lu
• [PATCH v11 4/4] sd: change to auto suspend mode
  • From: Aaron Lu
• [PATCH v11 0/4] block layer runtime pm
  • From: Aaron Lu
• [PATCH 3/3] ide: gayle: use module_platform_driver_probe()
  • From: Jingoo Han
• [PATCH 2/3] ide: tx4939ide: use module_platform_driver_probe()
  • From: Jingoo Han
• [PATCH 1/3] ide: tx4938ide: use module_platform_driver_probe()
  • From: Jingoo Han
• Re: [PATCH v3] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• [PATCH] pata_at32: use module_platform_driver_probe()
  • From: Jingoo Han
• Re: [PATCH v2] [libata] Avoid specialized TLA's in ZPODD's Kconfig
  • From: Jeff Garzik
• Re: [PATCH] sata_fsl: Remove redundant NULL check before kfree
  • From: Jeff Garzik
• Re: [PATCH 1/1] ahci: Add Device IDs for Intel Wellsburg PCH
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
  • From: Jeff Garzik
• Re: [PATCH] libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource
  • From: Jeff Garzik
• Re: [PATCH] pata_samsung_cf: use module_platform_driver_probe()
  • From: Jeff Garzik
• [PATCH] pata_samsung_cf: use module_platform_driver_probe()
  • From: Jingoo Han
• [PATCH] fsl/sata: create a sysfs entry for rx water mark
  • From: Qiang Liu
• [PATCH v2] [libata] Avoid specialized TLA's in ZPODD's Kconfig
  • From: Aaron Lu
• Re: [PATCH] libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource
  • From: Rafael J. Wysocki
• Re: [PATCH] [libata] Avoid specialized TLA's in ZPODD's Kconfig
  • From: Sergei Shtylyov
• [PATCH] libata-acpi.c: fix copy and paste mistake in ata_acpi_register_power_resource
  • From: Sander Eikelenboom
• Re: Reproduceable SATA lockup on 3.7.8 with SSD
  • From: Marc MERLIN
• Re: [PATCH 1/2] ACPI / glue: Add .match() callback to struct acpi_bus_type
  • From: Greg Kroah-Hartman
• Re: libata-acpi.c ata_acpi_register_power_resource copy and paste mistake ?
  • From: Rafael J. Wysocki
• Re: libata-acpi.c ata_acpi_register_power_resource copy and paste mistake ?
  • From: Aaron Lu
• [PATCH] [libata] Avoid specialized TLA's in ZPODD's Kconfig
  • From: Aaron Lu
• Re: [PATCH 2/2] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Rafael J. Wysocki
• Re: [PATCH 1/2] ACPI / glue: Add .match() callback to struct acpi_bus_type
  • From: Rafael J. Wysocki
• Re: [PATCH 1/2] ACPI / glue: Add .match() callback to struct acpi_bus_type
  • From: Yinghai Lu
• Re: [PATCH 2/2] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Jeff Garzik
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Rafael J. Wysocki
• [PATCH 1/2] ACPI / glue: Add .match() callback to struct acpi_bus_type
  • From: Rafael J. Wysocki
• [PATCH 2/2] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Rafael J. Wysocki
• libata-acpi.c ata_acpi_register_power_resource copy and paste mistake ?
  • From: Sander Eikelenboom
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Greg Kroah-Hartman
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Rafael J. Wysocki
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Rafael J. Wysocki
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Lan Tianyu
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Yinghai Lu
• Re: [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Greg Kroah-Hartman
• [Resend][PATCH] ACPI / glue: Drop .find_bridge() callback from struct acpi_bus_type
  • From: Rafael J. Wysocki
• Re: Regression between v3.5 and v3.6 in libata
  • From: Jan Sembera
• Re: Regression between v3.5 and v3.6 in libata
  • From: Aaron Lu
• Re: Regression between v3.5 and v3.6 in libata
  • From: Jan Sembera
• Re: Regression between v3.5 and v3.6 in libata
  • From: Robert Hancock
• Re: Regression between v3.5 and v3.6 in libata
  • From: Jan Sembera
• Regression between v3.5 and v3.6 in libata
  • From: Jan Sembera
• Re: Reproduceable SATA lockup on 3.7.8 with SSD
  • From: Marc MERLIN
• Re: [PATCH #upstream] libata: export local port number through /sys
  • From: Kay Sievers
• Marvell 88se9123 and 88se9128
  • From: Norman Diamond
• Re: [PATCH v2 0/4] R-Car SATA driver and platform data
  • From: Kuninori Morimoto
• Re: Reproduceable SATA lockup on 3.7.8 with SSD
  • From: Mathieu Desnoyers
• Re: [PATCH v2 0/4] R-Car SATA driver and platform data
  • From: Simon Horman
• Re: [PATCH #upstream] libata: export local port number through /sys
  • From: Jeff Garzik
• Re: [PATCH #upstream] libata: export local port number through /sys
  • From: David Milburn
• Re: [PATCH v2 0/4] R-Car SATA driver and platform data
  • From: Sergei Shtylyov
• [PATCH] sata_fsl: Remove redundant NULL check before kfree
  • From: Syam Sidhardhan
• Reproduceable SATA lockup on 3.7.8 with SSD
  • From: Marc MERLIN
• [Bug 54321] New: Strange behaviour SD-->IDE(PATA) converter
  • From: bugzilla-daemon
• [git patches] libata updates for 3.9
  • From: Jeff Garzik
• Re: [PATCH] ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
  • From: Rado Vrbovsky
• Re: [PATCH] ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
  • From: Sergei Shtylyov
• [PATCH 1/1] ahci: Add Device IDs for Intel Wellsburg PCH
  • From: James Ralston
• Re: [PATCH] ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
  • From: Rado Vrbovsky
• Re: [PATCH] ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
  • From: Sergei Shtylyov
• [PATCH] ata_piix: Add MODULE_PARM_DESC to prefer_ms_hyperv
  • From: Rado Vrbovsky
• Re: [PATCH v10 0/4] block layer runtime pm
  • From: Aaron Lu
• [PATCH v3 1/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• Re: [PATCH v10 0/4] block layer runtime pm
  • From: Alan Stern
• [PATCH v10 2/4] block: add runtime pm helpers
  • From: Aaron Lu
• [PATCH v10 3/4] block: implement runtime pm strategy
  • From: Aaron Lu
• [PATCH v10 4/4] sd: change to auto suspend mode
  • From: Aaron Lu
• [PATCH v10 1/4] block: add a flag to identify PM request
  • From: Aaron Lu
• [PATCH v10 0/4] block layer runtime pm
  • From: Aaron Lu
• Re: [PATCH 1/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• Re: [PATCH 1/4] libata: add R-Car SATA driver
  • From: Csaba Halász
• Re: [PATCH v9 3/4] block: implement runtime pm strategy
  • From: Alan Stern
• Re: [PATCH v2 0/4] R-Car SATA driver and platform data
  • From: Simon Horman
• Re: [PATCH v9 3/4] block: implement runtime pm strategy
  • From: Aaron Lu
• Re: [PATCH 0/4] R-Car SATA driver and platform data
  • From: Simon Horman
• Re: [PATCH v9 4/4] sd: change to auto suspend mode
  • From: Alan Stern
• [PATCH 1/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• [PATCH v2 0/4] R-Car SATA driver and platform data
  • From: Sergei Shtylyov
• [PATCH] make ata_exec_internal_sg honor DMADIR
  • From: Csaba Halász
• Re: [PATCH 0/4] R-Car SATA driver and platform data
  • From: Sergei Shtylyov
• Re: [PATCH v2] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• [PATCH v3] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• Re: [PATCH v9 4/4] sd: change to auto suspend mode
  • From: Aaron Lu
• Re: [PATCH 0/4] R-Car SATA driver and platform data
  • From: Simon Horman
• [PATCH 3/4] libata: add R-Car SATA driver
  • From: Sergei Shtylyov
• [PATCH 0/4] R-Car SATA driver and platform data
  • From: Sergei Shtylyov
• Re: [PATCH v2] ata: Fix DVD not dectected at some Haswell platforms
  • From: Libor Pechacek
• LSI controller resetting with fault_state 0x2622
  • From: Sagar Borikar
• [PATCH 5/5] ahci: Add Device IDs for Intel Wellsburg PCH
  • From: James Ralston
• [PATCH 1/5] ata_piix: Add Device IDs for Intel Wellsburg PCH
  • From: James Ralston
• Re: [PATCH v9 4/4] sd: change to auto suspend mode
  • From: Alan Stern
• Re: [PATCH 2/2] driver: ata: add new Exynos5250 SATA PHY controller driver
  • From: Vasanth Ananthan
• Re: [PATCH v9 4/4] sd: change to auto suspend mode
  • From: Aaron Lu
• Re: [PATCH v9 4/4] sd: change to auto suspend mode
  • From: Alan Stern
• Re: [PATCH 2/2] driver: ata: add new Exynos5250 SATA PHY controller driver
  • From: Tomasz Figa
• [PATCH v2 2/2] driver: ata: add new Exynos5250 SATA PHY controller driver
  • From: Vasanth Ananthan
• [PATCH v2 1/2] driver: ata: SATA PHY framework
  • From: Vasanth Ananthan
• [PATCH v2 0/2] Adding SATA PHY framework and PHY controller driver
  • From: Vasanth Ananthan
• Re: [PATCH resend] ARM: at91/ide: remove unsused at91-ide Kconfig entry
  • From: Johan Hovold
• Re: [PATCH resend] ARM: at91/ide: remove unsused at91-ide Kconfig entry
  • From: Jiri Kosina
• [PATCH resend] ARM: at91/ide: remove unsused at91-ide Kconfig entry
  • From: Johan Hovold
• [PATCH v9 1/4] block: add a flag to identify PM request
  • From: Aaron Lu
• [PATCH v9 3/4] block: implement runtime pm strategy
  • From: Aaron Lu
• [PATCH v9 2/4] block: add runtime pm helpers
  • From: Aaron Lu
• [PATCH v9 4/4] sd: change to auto suspend mode
  • From: Aaron Lu
• [PATCH v9 0/4] block layer runtime pm
  • From: Aaron Lu
• Re: options to disable 2nd channel on pata_via?
  • From: Alex Williamson
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: Aaron Lu
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: Aaron Lu
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: dbasehore .
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: Aaron Lu
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: Alan Stern
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: Aaron Lu
• [PATCH 2/2] arm: exynos5440: add dts node for the ahci sata
  • From: girishks2000
• [PATCH 1/2] ahci: sata: add support for exynos5440 sata
  • From: girishks2000
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: Alan Stern
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: Aaron Lu
• Re: [PATCH] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• Re: [PATCH] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• [PATCH v2] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: dbasehore .
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: James Bottomley
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: James Bottomley
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: dbasehore .
• Re: [PATCH 1/2] don't wait on disk to start on resume
  • From: dbasehore .
• [Bug 52821] ata_piix ATA_HOST_IGNORE_ATA for Hyper-V also affects Virtual PC 7
  • From: bugzilla-daemon
• Re: [PATCH] ata: Fix DVD not dectected at some Haswell platforms
  • From: Sergei Shtylyov
• Re: [PATCH] ata: Fix DVD not dectected at some Haswell platforms
  • From: Sergei Shtylyov
• Re: [PATCH] ata: Fix DVD not dectected at some Haswell platforms
  • From: joeyli
• Re: [PATCH] driver: ata: add new Exynos5250 SATA controller driver
  • From: Tushar Behera
• [PATCH] ata: Fix DVD not dectected at some Haswell platforms
  • From: Youquan Song
• Re: [PATCH 0/2] Adding SATA PHY framework and PHY controller driver
  • From: Tomasz Figa
• RE: [PATCH 2/2] driver: ata: add new Exynos5250 SATA PHY controller driver
  • From: Kukjin Kim
• [PATCH] driver: ata: add new Exynos5250 SATA controller driver
  • From: Vasanth Ananthan
• [PATCH 2/2] driver: ata: add new Exynos5250 SATA PHY controller driver
  • From: Vasanth Ananthan
• [PATCH 1/2] driver: ata: SATA PHY framework
  • From: Vasanth Ananthan
• [PATCH 0/2] Adding SATA PHY framework and PHY controller driver
  • From: Vasanth Ananthan
• Re: [PATCH v3] ata: libata-core: initialize native_sectors in ata_hpa_resize()
  • From: Simon Que
• Re: [PATCH v14 1/3] scsi: sr: support runtime pm
  • From: Tejun Heo
• [PATCH] libata: fix smatch warning for zpodd_wake_dev
  • From: Aaron Lu
• Re: [PATCH v14 1/3] scsi: sr: support runtime pm
  • From: Aaron Lu
• [PATCH v3 03/22] PCI, libata: remove find_bridge in acpi_bus_type
  • From: Yinghai Lu
• [PATCH v2 03/22] PCI, libata: remove find_bridge in acpi_bus_type
  • From: Yinghai Lu
• options to disable 2nd channel on pata_via?
  • From: Alex Williamson
• sil24 cmd issue question
  • From: 一个像夏天，一个像秋天
• Re: [PATCH v3] ata: libata-core: initialize native_sectors in ata_hpa_resize()
  • From: Simon Que
• Re: [libata:upstream 7/11] drivers/ata/libata-zpodd.c:83 zpodd_wake_dev() warn: variable dereferenced before check 'ata_dev' (see line 80)
  • From: Jeff Garzik
• Re: [PATCH v14 1/3] scsi: sr: support runtime pm
  • From: Jeff Garzik
• Re: [PATCH #upstream] revert libata: export host controller number thru /sys
  • From: Jeff Garzik
• Re: [PATCH 2/3] ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs
  • From: Jeff Garzik
• Re: [PATCH v2 2/2] libata: PM code cleanup for ata port
  • From: Jeff Garzik
• [PATCH 2/3] ahci: AHCI-mode SATA patch for Intel Avoton DeviceIDs
  • From: Seth Heasley
• [PATCH 1/3] ata_piix: IDE-mode SATA patch for Intel Avoton DeviceIDs
  • From: Seth Heasley
• Re: [PATCH v2 2/2] libata: PM code cleanup for ata port
  • From: Rafael J. Wysocki
• Re: [PATCH v2 2/2] libata: PM code cleanup for ata port
  • From: Sergei Shtylyov
• Re: [PATCH v3] ata: libata-core: initialize native_sectors in ata_hpa_resize()
  • From: Sergei Shtylyov
• [PATCH v2 2/2] libata: PM code cleanup for ata port
  • From: Aaron Lu
• [PATCH v2 1/2] libata: pm: differentiate system and runtime pm for ata port
  • From: Aaron Lu
• [PATCH v3] ata: libata-core: initialize native_sectors in ata_hpa_resize()
  • From: Simon Que
• [PATCH #upstream] libata: export local port number through /sys
  • From: David Milburn
• [PATCH #upstream] revert libata: export host controller number thru /sys
  • From: David Milburn
• Re: [PATCH v2] libata: export host controller number thru /sys
  • From: Kay Sievers
• Re: [PATCH v2] libata: export host controller number thru /sys
  • From: Gwendal Grignou
• [PATCH] libata: handle HDIO_SET_DMA & HDIO_GET_DMA ioctl
  • From: Jiada Wang
• [PATCH v14 2/3] libata: scsi: no poll when ODD is powered off
  • From: Aaron Lu
• [PATCH v14 3/3] scsi: remove can_power_off flag from scsi_device
  • From: Aaron Lu
• [PATCH v14 1/3] scsi: sr: support runtime pm
  • From: Aaron Lu
• [PATCH v14 0/3] ZPODD Patches
  • From: Aaron Lu
• Re: [PATCH v2] libata: export host controller number thru /sys
  • From: Kay Sievers
• Re: [PATCH v2] libata: export host controller number thru /sys
  • From: David Milburn
• Re: [git patches] libata fixes
  • From: Linus Torvalds
• Re: [PATCH v2] libata: export host controller number thru /sys
  • From: Gwendal Grignou