On 06/26/2013 07:10 PM, Sergei Shtylyov wrote: > Hello. > > On 26-06-2013 6:05, Aaron Lu wrote: > >>> There are some SATA controllers which have both devices 0 and 1 but this module > >> Do you mean a SATA port can connect to two SATA devices without PMP? > > No, I mean 2 SATA ports combined in one ATA channel as 2 devices. > Look for SLAVE_POSS in drivers/ata/[s]ata*.c... Oh yes that happened when the SATA controller is in IDE programming mode, not AHCI. ZPODD is only supported for SATA controllers in AHCI programming mode, the ACPI table will not support power off the port if the controller is in IDE mode, so the device 1 case shouldn't happen in practice :-) Thanks, Aaron -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
