Hi all,
I met a lockup while I was running IO test on disks connected
with an fbs enabled pmp board and an ahci host.
looks like the reason for the lockup is as below:
ahci_interrert()
| spin_lock(&host->lock); // get host->lock
| ahci_port_intr()
| ahci_error_intr() // status & PORT_IRQ_ERROR
| ata_link_online() // if fbs_enabled
| sata_scr_read()
| sata_pmp_scr_read() // using pmp
|ata_exec_internal()
| ata_exec_internal_sg()
| spin_lock_irqsave(ap->lock, flags);
since ap->lock == &host->lock,
these two spin_lock get conflict
Did I miss anything? Can someone confirm the issue?
my dump info is listed below:
---
RIP: 0010:[<ffffffff814c867f>] [<ffffffff814c867f>]
_spin_lock_irqsave+0x2f/0x40
RSP: 0000:ffff880001e43c38 EFLAGS: 00000097
RAX: 000000000000b685 RBX: ffff88007654de48 RCX: 000000000000b684
RDX: 0000000000000082 RSI: ffff880001e43d88 RDI: ffff88007930c158
RBP: ffff880001e43c38 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000001ff8 R11: 0000000000000246 R12: ffff88007654c000
R13: ffff88007654de48 R14: ffff88007654dce0 R15: 0000000000000000
FS: 00007fc12e0eb700(0000) GS:ffff880001e40000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 00007f3b55311cc1 CR3: 0000000078f7a000 CR4: 00000000000026e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process gzip (pid: 15126, threadinfo ffff880067a86000, task ffff880037d02a70)
Stack:
ffff880001e43ce8 ffffffff813558f7 ffff880000000003 0000000000000000
<0> ffffffff81328537 ffff880001e43cc0 000000008134743b ffff880001e43cc0
<0> e4ffffff81262545 ffff880001e43d88 0000000000000000 ffff880001e43cc0
Call Trace:
<IRQ>
[<ffffffff813558f7>] ata_exec_internal_sg+0x67/0x570
[<ffffffff81328537>] ? put_device+0x17/0x20
[<ffffffff81355e79>] ata_exec_internal+0x79/0xb0
[<ffffffff8134699f>] ? scsi_run_queue+0xcf/0x380
[<ffffffff813406c0>] ? __scsi_put_command+0x60/0xa0
[<ffffffff8136740f>] sata_pmp_read+0x7f/0xb0
[<ffffffff8101adf5>] ? native_sched_clock+0x15/0x70
[<ffffffff81367505>] sata_pmp_scr_read+0x35/0xb0
[<ffffffff81353096>] sata_scr_read+0x26/0x60
[<ffffffff81353708>] ata_phys_link_online+0x18/0x30
[<ffffffff81353750>] ata_link_online+0x30/0x70
[<ffffffffa066b964>] ahci_interrupt+0x684/0x790 [ahci]
[<ffffffff810d7750>] handle_IRQ_event+0x60/0x170
[<ffffffff81073983>] ? __do_softirq+0x113/0x1d0
[<ffffffff810d9e46>] handle_edge_irq+0xc6/0x160
[<ffffffff81015fb9>] handle_irq+0x49/0xa0
[<ffffffff814cd62c>] do_IRQ+0x6c/0xf0
[<ffffffff81013ad3>] ret_from_intr+0x0/0x11
<EOI>
Thanks,
Yu
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
