Hello, On Fri, Jul 05, 2013 at 05:52:22PM +0800, Richard Zhu wrote: > - CAP_SSS(bit20) of the HOST_CAP is writable, default > value is '0', should be configured to be '1' > - bit0 (only one AHCI SATA port on imx6q) of the > HOST_PORTS_IMPL should be set to be '1'.(default 0) > - One Vendor Specific register HOST_TIMER1MS(offset:0xe0) > should be configured regarding to the frequency of AHB > bus clock. > - Configurations of the AHCI PHY clock, and the signal > parameters of the GPR13 Can't you just add a platform specific init callback to ahci_platform? I don't see how these small differences in init sequence justify a separate driver. Thanks. -- tejun -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
