On 07/26/2013 10:11 AM, Mark Langsdorf wrote: > The Calxeda sata_highbank driver has been adding its descriptions to the > ahci driver. Separate them properly. > > Signed-off-by: Mark Langsdorf <mark.langsdorf@xxxxxxxxxxx> Acked-by: Rob Herring <rob.herring@xxxxxxxxxxx> Rob > --- > .../devicetree/bindings/ata/ahci-platform.txt | 14 ++-------- > .../devicetree/bindings/ata/sata_highbank.txt | 32 ++++++++++++++++++++++ > 2 files changed, 34 insertions(+), 12 deletions(-) > create mode 100644 Documentation/devicetree/bindings/ata/sata_highbank.txt > > diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt > index 3ec0c5c..14d7b22 100644 > --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt > +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt > @@ -4,27 +4,17 @@ SATA nodes are defined to describe on-chip Serial ATA controllers. > Each SATA controller should have its own node. > > Required properties: > -- compatible : compatible list, contains "calxeda,hb-ahci" or "snps,spear-ahci" > +- compatible : compatible list, contains "snps,spear-ahci" > - interrupts : <interrupt mapping for SATA IRQ> > - reg : <registers mapping> > > Optional properties: > -- calxeda,port-phys: phandle-combophy and lane assignment, which maps each > - SATA port to a combophy and a lane within that > - combophy > -- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off, > - which indicates that the driver supports SGPIO > - indicator lights using the indicated GPIOs > -- calxeda,led-order : a u32 array that map port numbers to offsets within the > - SGPIO bitstream. > - dma-coherent : Present if dma operations are coherent > > Example: > sata@ffe08000 { > - compatible = "calxeda,hb-ahci"; > + compatible = "snps,spear-ahci"; > reg = <0xffe08000 0x1000>; > interrupts = <115>; > - calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 > - &combophy0 2 &combophy0 3>; > > }; > diff --git a/Documentation/devicetree/bindings/ata/sata_highbank.txt b/Documentation/devicetree/bindings/ata/sata_highbank.txt > new file mode 100644 > index 0000000..aa1b798 > --- /dev/null > +++ b/Documentation/devicetree/bindings/ata/sata_highbank.txt > @@ -0,0 +1,32 @@ > +* Calxeda AHCI SATA Controller > + > +SATA nodes are defined to describe on-chip Serial ATA controllers. > +The Calxeda SATA controller mostly conforms to the AHCI interface > +with some special extensions to add functionality. > +Each SATA controller should have its own node. > + > +Required properties: > +- compatible : compatible list, contains "calxeda,hb-ahci" > +- interrupts : <interrupt mapping for SATA IRQ> > +- reg : <registers mapping> > + > +Optional properties: > +- dma-coherent : Present if dma operations are coherent > +- calxeda,port-phys: phandle-combophy and lane assignment, which maps each > + SATA port to a combophy and a lane within that > + combophy > +- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off, > + which indicates that the driver supports SGPIO > + indicator lights using the indicated GPIOs > +- calxeda,led-order : a u32 array that map port numbers to offsets within the > + SGPIO bitstream. > + > +Example: > + sata@ffe08000 { > + compatible = "calxeda,hb-ahci"; > + reg = <0xffe08000 0x1000>; > + interrupts = <115>; > + calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 > + &combophy0 2 &combophy0 3>; > + > + }; > -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html