Highbank supports SGPIO by bit-banging out the SGPIO signals over
three GPIO pins defined in the DTB. Add support for this SGPIO
functionality.
Signed-off-by: Mark Langsdorf <mark.langsdorf@xxxxxxxxxxx>
---
Changes from v3:
Correctly mask the activity bits to clear bits in ecx_parse_sgpio()
Changes from v2:
Added plat_data to ahci_host_priv
Moved driver specific data to plat_data and got rid of ecx_host_priv
Corrected order of operations in ecx_transmit_led_message
Standardized bit operations in ecx_parse_sgpio
Changes from v1:
Moved all global variables to a private structure
Replaced all magic numbers with defined symbols
Added some comments
Removed the default ordering of ports to LEDs
Fixed several bugs in the code to read led-order
Made highbank_set_em_messages static
.../devicetree/bindings/ata/ahci-platform.txt | 5 +
arch/arm/boot/dts/ecx-common.dtsi | 2 +
drivers/ata/ahci.h | 1 +
drivers/ata/sata_highbank.c | 161 ++++++++++++++++++++-
4 files changed, 163 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index b519f9b..3ec0c5c 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -12,6 +12,11 @@ Optional properties:
- calxeda,port-phys: phandle-combophy and lane assignment, which maps each
SATA port to a combophy and a lane within that
combophy
+- calxeda,sgpio-gpio: phandle-gpio bank, bit offset, and default on or off,
+ which indicates that the driver supports SGPIO
+ indicator lights using the indicated GPIOs
+- calxeda,led-order : a u32 array that map port numbers to offsets within the
+ SGPIO bitstream.
- dma-coherent : Present if dma operations are coherent
Example:
diff --git a/arch/arm/boot/dts/ecx-common.dtsi b/arch/arm/boot/dts/ecx-common.dtsi
index d61b535..e8559b7 100644
--- a/arch/arm/boot/dts/ecx-common.dtsi
+++ b/arch/arm/boot/dts/ecx-common.dtsi
@@ -33,6 +33,8 @@
calxeda,port-phys = <&combophy5 0 &combophy0 0
&combophy0 1 &combophy0 2
&combophy0 3>;
+ calxeda,sgpio-gpio =<&gpioh 5 1 &gpioh 6 1 &gpioh 7 1>;
+ calxeda,led-order = <4 0 1 2 3>;
};
sdhci@ffe0e000 {
diff --git a/drivers/ata/ahci.h b/drivers/ata/ahci.h
index 10b14d4..6144b93 100644
--- a/drivers/ata/ahci.h
+++ b/drivers/ata/ahci.h
@@ -321,6 +321,7 @@ struct ahci_host_priv {
u32 em_buf_sz; /* EM buffer size in byte */
u32 em_msg_type; /* EM message type */
struct clk *clk; /* Only for platforms supporting clk */
+ void *plat_data; /* Other platform data */
};
extern int ahci_ignore_sss;
diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c
index b20aa96..8de8ac8 100644
--- a/drivers/ata/sata_highbank.c
+++ b/drivers/ata/sata_highbank.c
@@ -33,6 +33,9 @@
#include <linux/interrupt.h>
#include <linux/delay.h>
#include <linux/export.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+
#include "ahci.h"
#define CPHY_MAP(dev, addr) ((((dev) & 0x1f) << 7) | (((addr) >> 9) & 0x7f))
@@ -66,6 +69,146 @@ struct phy_lane_info {
};
static struct phy_lane_info port_data[CPHY_PORT_COUNT];
+static DEFINE_SPINLOCK(sgpio_lock);
+#define SCLOCK 0
+#define SLOAD 1
+#define SDATA 2
+#define SGPIO_PINS 3
+#define SGPIO_PORTS 8
+
+/* can be cast as an ahci_host_priv for compatibility with most functions */
+struct ecx_plat_data {
+ u32 n_ports;
+ unsigned sgpio_gpio[SGPIO_PINS];
+ u32 sgpio_pattern;
+ u32 port_to_sgpio[SGPIO_PORTS];
+};
+
+#define SGPIO_SIGNALS 3
+#define ECX_ACTIVITY_BITS 0x300000
+#define ECX_ACTIVITY_SHIFT 2
+#define ECX_LOCATE_BITS 0x80000
+#define ECX_LOCATE_SHIFT 1
+#define ECX_FAULT_BITS 0x400000
+#define ECX_FAULT_SHIFT 0
+static inline int sgpio_bit_shift(struct ecx_plat_data *pdata, u32 port,
+ u32 shift)
+{
+ return 1 << (3 * pdata->port_to_sgpio[port] + shift);
+}
+
+static void ecx_parse_sgpio(struct ecx_plat_data *pdata, u32 port, u32 state)
+{
+ if (state & ECX_ACTIVITY_BITS)
+ pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
+ ECX_ACTIVITY_SHIFT);
+ else
+ pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
+ ECX_ACTIVITY_SHIFT);
+ if (state & ECX_LOCATE_BITS)
+ pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
+ ECX_LOCATE_SHIFT);
+ else
+ pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
+ ECX_LOCATE_SHIFT);
+ if (state & ECX_FAULT_BITS)
+ pdata->sgpio_pattern |= sgpio_bit_shift(pdata, port,
+ ECX_FAULT_SHIFT);
+ else
+ pdata->sgpio_pattern &= ~sgpio_bit_shift(pdata, port,
+ ECX_FAULT_SHIFT);
+}
+
+/*
+ * Tell the LED controller that the signal has changed by raising the clock
+ * line for 50 uS and then lowering it for 50 uS.
+ */
+static void ecx_led_cycle_clock(struct ecx_plat_data *pdata)
+{
+ gpio_set_value(pdata->sgpio_gpio[SCLOCK], 1);
+ udelay(50);
+ gpio_set_value(pdata->sgpio_gpio[SCLOCK], 0);
+ udelay(50);
+}
+
+static ssize_t ecx_transmit_led_message(struct ata_port *ap, u32 state,
+ ssize_t size)
+{
+ struct ahci_host_priv *hpriv = ap->host->private_data;
+ struct ecx_plat_data *pdata = (struct ecx_plat_data *) hpriv->plat_data;
+ struct ahci_port_priv *pp = ap->private_data;
+ unsigned long flags;
+ int pmp, i;
+ struct ahci_em_priv *emp;
+ u32 sgpio_out;
+
+ /* get the slot number from the message */
+ pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
+ if (pmp < EM_MAX_SLOTS)
+ emp = &pp->em_priv[pmp];
+ else
+ return -EINVAL;
+
+ if (!(hpriv->em_msg_type & EM_MSG_TYPE_LED))
+ return size;
+
+ spin_lock_irqsave(&sgpio_lock, flags);
+ ecx_parse_sgpio(pdata, ap->port_no, state);
+ sgpio_out = pdata->sgpio_pattern;
+ gpio_set_value(pdata->sgpio_gpio[SLOAD], 1);
+ ecx_led_cycle_clock(pdata);
+ gpio_set_value(pdata->sgpio_gpio[SLOAD], 0);
+ /*
+ * bit-bang out the SGPIO pattern, by consuming a bit and then
+ * clocking it out.
+ */
+ for (i = 0; i < (SGPIO_SIGNALS * pdata->n_ports); i++) {
+ gpio_set_value(pdata->sgpio_gpio[SDATA], sgpio_out & 1);
+ sgpio_out >>= 1;
+ ecx_led_cycle_clock(pdata);
+ }
+
+ /* save off new led state for port/slot */
+ emp->led_state = state;
+
+ spin_unlock_irqrestore(&sgpio_lock, flags);
+ return size;
+}
+
+static void highbank_set_em_messages(struct device *dev,
+ struct ahci_host_priv *hpriv,
+ struct ata_port_info *pi)
+{
+ struct device_node *np = dev->of_node;
+ struct ecx_plat_data *pdata = hpriv->plat_data;
+ int i;
+ int err;
+
+ for (i = 0; i < SGPIO_PINS; i++) {
+ err = of_get_named_gpio(np, "calxeda,sgpio-gpio", i);
+ if (IS_ERR_VALUE(err))
+ return;
+
+ pdata->sgpio_gpio[i] = err;
+ err = gpio_request(pdata->sgpio_gpio[i], "CX SGPIO");
+ if (err) {
+ pr_err("sata_highbank gpio_request %d failed: %d\n",
+ i, err);
+ return;
+ }
+ gpio_direction_output(pdata->sgpio_gpio[i], 1);
+ }
+ of_property_read_u32_array(np, "calxeda,led-order",
+ pdata->port_to_sgpio,
+ pdata->n_ports);
+
+ /* store em_loc */
+ hpriv->em_loc = 0;
+ hpriv->em_buf_sz = 4;
+ hpriv->em_msg_type = EM_MSG_TYPE_LED;
+ pi->flags |= ATA_FLAG_EM | ATA_FLAG_SW_ACTIVITY;
+}
+
static u32 __combo_phy_reg_read(u8 sata_port, u32 addr)
{
u32 data;
@@ -241,6 +384,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class,
static struct ata_port_operations ahci_highbank_ops = {
.inherits = &ahci_ops,
.hardreset = ahci_highbank_hardreset,
+ .transmit_led_message = ecx_transmit_led_message,
};
static const struct ata_port_info ahci_highbank_port_info = {
@@ -264,12 +408,13 @@ static int ahci_highbank_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_host_priv *hpriv;
+ struct ecx_plat_data *pdata;
struct ata_host *host;
struct resource *mem;
int irq;
- int n_ports;
int i;
int rc;
+ u32 n_ports;
struct ata_port_info pi = ahci_highbank_port_info;
const struct ata_port_info *ppi[] = { &pi, NULL };
@@ -290,6 +435,11 @@ static int ahci_highbank_probe(struct platform_device *pdev)
dev_err(dev, "can't alloc ahci_host_priv\n");
return -ENOMEM;
}
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "can't alloc ecx_plat_data\n");
+ return -ENOMEM;
+ }
hpriv->flags |= (unsigned long)pi.private_data;
@@ -313,8 +463,6 @@ static int ahci_highbank_probe(struct platform_device *pdev)
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
- ahci_set_em_messages(hpriv, &pi);
-
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
@@ -322,6 +470,10 @@ static int ahci_highbank_probe(struct platform_device *pdev)
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
+ pdata->n_ports = n_ports;
+ hpriv->plat_data = pdata;
+ highbank_set_em_messages(dev, hpriv, &pi);
+
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
if (!host) {
rc = -ENOMEM;
@@ -333,9 +485,6 @@ static int ahci_highbank_probe(struct platform_device *pdev)
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
- if (pi.flags & ATA_FLAG_EM)
- ahci_reset_em(host);
-
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
