Linux IDE Archive

• Thread Index

• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: david
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ATA support for 4k sector size
  • From: david
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• Re: ATA support for 4k sector size
  • From: Martin K. Petersen
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Chuck Ebbert
• Re: ATA support for 4k sector size
  • From: H. Peter Anvin
• [PATCH 2/2] ata: Add support for Long Logical Sectors and Long Physical Sectors
  • From: Matthew Wilcox
• ATA support for 4k sector size
  • From: Matthew Wilcox
• [PATCH 1/2] ata: Define new commands from ATA8
  • From: Matthew Wilcox
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Mark Lord
• 2.6.28.7 boot problems
  • From: Andrew Schepler
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [patch for 2.6.29? 3/4] pata_legacy: for VLB 32bit PIO don't try tricks with slop
  • From: Jeff Garzik
• Re: [patch for 2.6.29? 2/4] pata_amd: program FIFO
  • From: Jeff Garzik
• Re: linux-next: Tree for February 24 (ide-atapi/ide-cd build errors)
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch for 2.6.29? 4/4] pata_it821x: resume from hibernation fails with RAID volume
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: fix SoC interrupt breakage
  • From: Jeff Garzik
• Re: [PATCH 01/06] sata_mv: cache frequently read registers
  • From: Jeff Garzik
• Re: sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Mikael Pettersson
• [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Mike Cui
• Re: [PATCH 01/06] sata_mv: cache frequently read registers
  • From: Mark Lord
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Mark Lord
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Mark Lord
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• Re: Bad module reference counter
  • From: Stanislaw Gruszka
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Tomasz Chmielewski
• Re: sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Tejun Heo
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Tejun Heo
• sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26
  • From: Mike Cui
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Mark Lord
• Re: Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Chuck Ebbert
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Tomasz Chmielewski
• Re: linux-next: Tree for February 24 (ide-atapi/ide-cd build errors)
  • From: Randy Dunlap
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Mark Lord
• Kernel bug crashing in HDIO_DRIVE_TASKFILE
  • From: Norman Diamond
• Re: [RFC][PATCH] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: saeed bishara
• [RFC][PATCH] sata_mv: harddisk activity led no longer responsive on QNAP TS-109
  • From: Frans Pop
• [PATCH] ide: remove CONFIG_BLK_DEV_IDEDOUBLER config option
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/6] ide: more unifications of ATA and ATAPI support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: fix locking in drive_release_dev()
  • From: Bartlomiej Zolnierkiewicz
• Re: Bad module reference counter
  • From: Bartlomiej Zolnierkiewicz
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Tomasz Chmielewski
• Re: strange hdparm results with serverworks and pata-serverworks
  • From: Greg Freemyer
• strange hdparm results with serverworks and pata-serverworks
  • From: Tomasz Chmielewski
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Mark Lord
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Martin K. Petersen
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Martin K. Petersen
• Re: [PATCH #upstream-fixes] sata_promise: request follow-up SRST - it works
  • From: Peter Favrholdt
• Re: Synopsis SATA AHCI support
  • From: Sagar Borikar
• Re: [PATCH 0/10] ide: flags query macros
  • From: Borislav Petkov
• Re: [PATCH 0/10] ide: flags query macros
  • From: Sam Ravnborg
• Re: help! locks problem in block layer request queue?
  • From: Jens Axboe
• Re: [PATCH 0/10] ide: flags query macros
  • From: Borislav Petkov
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: FUJITA Tomonori
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Mark Lord
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• Re: no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Chuck Ebbert
• Re: [PATCH] hdparm: Show form factor and media rotation rate
  • From: Michael Tokarev
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Robert Hancock
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Wes Shull
• RE: help! locks problem in block layer request queue?
  • From: Gao, Yunpeng
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: FUJITA Tomonori
• Re: no hotplugging support (FIXME)
  • From: Robert Hancock
• [PATCH] hdparm: Show form factor and media rotation rate
  • From: Martin K. Petersen
• Re: no hotplugging support (FIXME)
  • From: Alan Cox
• no hotplugging support (FIXME)
  • From: Todd and Margo Chester
• Re: General question (scheduler) with SSDs?
  • From: Kay Sievers
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• [PATCH] remove stale comment from <linux/hdreg.h>
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ide: merge ide_arm and ide_generic host drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide-generic: remove no longer needed sysfs interface
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/10] ide: sanitize ide_build_sglist() and ide_destroy_dmatable()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/10] ide: set/clear drive->waiting_for_dma flag in the core code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/10] ide: move ide_map_sg() call out from ->dma_setup method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/10] ide: add ->dma_check method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/10] trm290: use custom ->dma_{start,end} to handle trm290_prepare_drive()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/10] ns87415: use custom ->dma_{start,end} to handle ns87415_prepare_drive()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/10] ide: add ide_dma_prepare() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/10] ide: destroy DMA mappings after ending DMA
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/10] ide: inline ide_dma_timeout() into ide_dma_timeout_retry()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/10] ide: add ->dma_clear method and remove ->dma_timeout one
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/10] ide: DMA methods cleanups/sanitizations
  • From: Bartlomiej Zolnierkiewicz
• Re: General question (scheduler) with SSDs?
  • From: Kay Sievers
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: General question (scheduler) with SSDs?
  • From: Kay Sievers
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Wes Shull
• Re: General question (scheduler) with SSDs?
  • From: Kay Sievers
• Re: Bad module reference counter
  • From: Stanislaw Gruszka
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: General question (scheduler) with SSDs?
  • From: Justin Piszcz
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: General question (scheduler) with SSDs?
  • From: Sitsofe Wheeler
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Robert Hancock
• Re: libata timeouts when stressing a Samsung HDD
  • From: Robert Hancock
• Re: Synopsis SATA AHCI support
  • From: Tejun Heo
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• [PATCH] ide: remove ide_execute_pkt_cmd() (v2)
  • From: Bartlomiej Zolnierkiewicz
• Re: Bad module reference counter
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: Bartlomiej Zolnierkiewicz
• Re: libata timeouts when stressing a Samsung HDD
  • From: Greg Freemyer
• [PATCH] sata_mv: fix SoC interrupt breakage
  • From: Mark Lord
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• Re: Synopsis SATA AHCI support
  • From: Sagar Borikar
• Re: General question (scheduler) with SSDs?
  • From: Pádraig Brady
• General question (scheduler) with SSDs?
  • From: Justin Piszcz
• Re: help! locks problem in block layer request queue?
  • From: Jens Axboe
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: FUJITA Tomonori
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: FUJITA Tomonori
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: FUJITA Tomonori
• Re: Bad module reference counter
  • From: Stanislaw Gruszka
• help! locks problem in block layer request queue?
  • From: Gao, Yunpeng
• Re: Storage-Fixup-Entry
  • From: Tejun Heo
• Re: Add to storage-fixup.conf
  • From: Tejun Heo
• Re: SATA II generation controllers reset problem
  • From: Tejun Heo
• Re: ahci fails with SATA DVD drive, IDE mode works
  • From: Tejun Heo
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: Tejun Heo
• Re: Synopsis SATA AHCI support
  • From: Tejun Heo
• Re: [PATCH] ide-cd: minor ide_cdrom_setup() cleanup
  • From: Borislav Petkov
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• Synopsis SATA AHCI support
  • From: Sagar Borikar
• Re: [PATCH] ide-cd: minor ide_cdrom_setup() cleanup
  • From: Sergei Shtylyov
• initramfs-tools 0.93 status report
  • From: maximilian attems
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: Chuck Ebbert
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Chuck Ebbert
• Re: Bad module reference counter
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] fix dma_unmap_sg misuse
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cd: document capacity hack
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Chuck Ebbert
• Re: [PATCH] ide-cd: document capacity hack
  • From: Sergei Shtylyov
• [PATCH 2/2] ide-floppy: use ide_pio_bytes()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide-{floppy,tape}: fix padding for PIO transfers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] it821x: remove dead URL
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-cd: minor ide_cdrom_setup() cleanup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-cd: document capacity hack
  • From: Bartlomiej Zolnierkiewicz
• Re: linux-next: Tree for February 12 (ide)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] atiixp: missing parentheses?
  • From: Bartlomiej Zolnierkiewicz
• [Bug 12734] ide-iops.c insists on doing 80-wire check
  • From: bugme-daemon
• Re: linux-next: Tree for February 12 (ide)
  • From: Randy Dunlap
• [PATCH 3/3 v4] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• [PATCH 2/3 v3] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• [Bug 12734] ide-iops.c insists on doing 80-wire check
  • From: bugme-daemon
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [BUG] 2.6.29-rc2-git1 to -rc5: libata lockup on boot, LED solid, 100% CPU
  • From: Andreas Mohr
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Sergei Shtylyov
• Re: [PATCH] atiixp: missing parentheses?
  • From: Roel Kluin
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH] atiixp: missing parentheses?
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/10] ide: flags query macros
  • From: Bartlomiej Zolnierkiewicz
• Re: linux-next: Tree for February 12 (ide)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one
  • From: Sergei Shtylyov
• Re: [PATCH] atiixp: missing parentheses?
  • From: Sergei Shtylyov
• Re: [PATCH] atiixp: missing parentheses?
  • From: Sergei Shtylyov
• Re: [PATCH 2/3 v2] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] atiixp: missing parentheses?
  • From: Roel Kluin
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH v2] libata: Don't trust current capacity values in identify words 57-58
  • From: Sergei Shtylyov
• Re: [PATCH] amd74xx: fix typo in drivers/ide/amd74xx.c
  • From: Sergei Shtylyov
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: FUJITA Tomonori
• Re: [Bug #12263] Sata soft reset filling log
  • From: Hugh Dickins
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: [PATCH] amd74xx: fix typo in drivers/ide/amd74xx.c
  • From: Jeff Garzik
• [PATCH] amd74xx: fix typo in drivers/ide/amd74xx.c
  • From: Wei Yongjun
• [PATCH] fix dma_unmap_sg misuse
  • From: FUJITA Tomonori
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Robert Hancock
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Mark Lord
• [PATCH v2] libata: Don't trust current capacity values in identify words 57-58
  • From: Robert Hancock
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Sergei Shtylyov
• Re: [PATCH 1/2] libata-sff: fix 32-bit PIO ATAPI regression
  • From: Sergei Shtylyov
• Re: [PATCH 01/06] sata_mv: cache frequently read registers
  • From: Jeff Garzik
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH #upstream] ahci/sata_vsc: drop intx manipulation on msi enable
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_nv: give up hardreset on nf2
  • From: Jeff Garzik
• Re: [PATCH 1/2] libata-sff: fix 32-bit PIO ATAPI regression
  • From: Jeff Garzik
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Robert Hancock
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Mark Lord
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Mark Lord
• Re: [PATCH 0/10] ide: flags query macros
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/10] ide: add flags query macros
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: device/vendor confusion
  • From: Bartlomiej Zolnierkiewicz
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Chuck Ebbert
• Re: libata timeouts when stressing a Samsung HDD
  • From: Chuck Ebbert
• Re: [BUG] 2.6.29-rc2-git1 to -rc5: libata lockup on boot, LED solid, 100% CPU
  • From: Mikael Pettersson
• Re: [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Sergei Shtylyov
• [PATCH] libata: Don't trust current capacity values in identify words 57-58
  • From: Robert Hancock
• [BUG] 2.6.29-rc2-git1 to -rc5: libata lockup on boot, LED solid, 100% CPU
  • From: Andreas Mohr
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Ingo Molnar
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Sergei Shtylyov
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: Promise SATA error-handling not quite working (2.6.29-rc4)
  • From: Mikael Pettersson
• Re: [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths
  • From: Borislav Petkov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Borislav Petkov
• Re: Drives which perform frequent head unloads under Linux
  • From: Tejun Heo
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• [Bug 12714] [pata_ali] ATAPI UltraDMA on secondary channel broken
  • From: bugme-daemon
• [PATCH 20/20] ide-cd: unify transfer padding in cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/20] ide-cd: use common completion path for DMA requests in cdrom_newpc_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/20] ide-cd: use scatterlists for PIO transfers (non-fs requests)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/20] ide-cd: merge ide_cd_prepare_rw_request() into cdrom_start_rw()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/20] ide-cd: fix non-SECTOR_SIZE-multiples PIO transfers for fs requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/20] ide-cd: use scatterlists for PIO transfers (fs requests)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/20] ide-cd: cleanup ide_cd_do_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/20] ide-cd: kill whole failed request in ide_cd_do_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/20] ide-cd: remove cdrom_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/20] ide-cd: unify cdrom_newpc_intr() exit paths
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/20] ide-cd: move setting REQ_FAILED flag out from 'end_request' exit path
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/20] ide-cd: unify ide_cd_do_request() exit paths
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/20] ide-cd: factor out failed request completion from cdrom_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/20] ide-cd: remove no longer needed 'ignore' module parameter
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/20] ide: remove needless ide_dump_status_no_sense() wrapper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/20] ide-cd: remove dead code from cdrom_decode_status()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/20] ide-cd: use ide_end_rq() also for failed non-fs requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/20] ide-cd: remove dead URLs
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/20] ide: use PageHighMem() instead of ifdefs in ide_pio_bytes()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/20] ide: add support for arbitrary transfer lengths to ide_pio_bytes()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/20] ide-cd: use scatterlists also for PIO transfers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Promise SATA error-handling not quite working (2.6.29-rc4)
  • From: George Spelvin
• Re: [PATCH 14/18] ide: use ->tf_read in ide_read_error()
  • From: Sergei Shtylyov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Rafael J. Wysocki
• Re: [PATCH] ide: device/vendor confusion
  • From: Sergei Shtylyov
• Re: [Bug #12263] Sata soft reset filling log
  • From: Ingo Molnar
• [Bug 12714] New: [pata_ali] ATAPI UltraDMA on secondary channel broken
  • From: bugme-daemon
• [PATCH] ide: device/vendor confusion
  • From: Roel Kluin
• Re: [Bug #12263] Sata soft reset filling log
  • From: Rafael J. Wysocki
• Re: [PATCH 01/10] ide: add flags query macros
  • From: Sam Ravnborg
• Re: [Bug #12263] Sata soft reset filling log
  • From: Justin Madru
• Re: [PATCH 13/18] ide: use ->tf_load in SELECT_DRIVE()
  • From: Sergei Shtylyov
• Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Sergei Shtylyov
• Re: [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Jeff Garzik
• [PATCH 2/2 resend] libata-sff: avoid byte swapping in ata_sff_data_xfer()
  • From: Sergei Shtylyov
• [PATCH 2/2] libata-sff: avoid byte swapping in ata
  • From: Sergei Shtylyov
• [PATCH 1/2] libata-sff: fix 32-bit PIO ATAPI regression
  • From: Sergei Shtylyov
• Re: [PATCH 01/10] ide: add flags query macros
  • From: Borislav Petkov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Borislav Petkov
• Re: [PATCH 2/3 v2] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 01/10] ide: add flags query macros
  • From: Sam Ravnborg
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Sergei Shtylyov
• [PATCH 06/10] ide-disk: use flags query macros
  • From: Borislav Petkov
• [PATCH 10/10] ide: use flags query macros in the remaining ide code
  • From: Borislav Petkov
• [PATCH 08/10] ide-eh: use flags query macros
  • From: Borislav Petkov
• [PATCH 07/10] ide-devsets: use flags query macros
  • From: Borislav Petkov
• [PATCH 05/10] ide-atapi: use flags query macros
  • From: Borislav Petkov
• [PATCH 02/10] ide-cd: use flags query macros
  • From: Borislav Petkov
• [PATCH 09/10] ide-probe: use flags query macros
  • From: Borislav Petkov
• [PATCH 04/10] ide-tape: use flags query macros
  • From: Borislav Petkov
• [PATCH 01/10] ide: add flags query macros
  • From: Borislav Petkov
• [PATCH 0/10] ide: flags query macros
  • From: Borislav Petkov
• [PATCH 03/10] ide-floppy: use flags query macros
  • From: Borislav Petkov
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Douglas Gilbert
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Mark Lord
• Re: SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: SATL support for hdparm?
  • From: Mark Lord
• [Bug #12263] Sata soft reset filling log
  • From: Rafael J. Wysocki
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Maciej W. Rozycki
• SATL support for hdparm?
  • From: Lennert Buytenhek
• Re: Intel ICH9M/M-E SATA error-handling/reset problems
  • From: Jeff Garzik
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Robert Hancock
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Sergei Shtylyov
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Maciej W. Rozycki
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Mark Lord
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Sergei Shtylyov
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Hanno Böck
• Storage-Fixup-Entry
  • From: Lukas Wymann
• Re: Very old IDE hard drive (240 MB) detected as 1.1 TB
  • From: Robert Hancock
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: EXPORT_SYMBOL_GPL(ata_pio_sectors) ?
  • From: Mark Lord
• [PATCH 06/06] sata_mv: implement mv_qc_issue_fis() for errata workaround
  • From: Mark Lord
• [PATCH 05/06] sata_mv: export ata_pio_queue_task()
  • From: Mark Lord
• [PATCH 04/06] sata_mv: implement mv_sff_check_status
  • From: Mark Lord
• [PATCH 03/06] sata_mv: stricter irq masking
  • From: Mark Lord
• [PATCH 02/06] sata_mv: enable ATAPI DMA for GEN_IIE chips
  • From: Mark Lord
• [PATCH 01/06] sata_mv: cache frequently read registers
  • From: Mark Lord
• Re: sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Robert Hancock
• Re: EXPORT_SYMBOL_GPL(ata_pio_sectors) ?
  • From: Jeff Garzik
• sata_nv frees DMA memory with different size (possibly a generic libata bug)
  • From: Chuck Ebbert
• EXPORT_SYMBOL_GPL(ata_pio_sectors) ?
  • From: Mark Lord
• Re: linux-next: Tree for February 12 (ide)
  • From: Randy Dunlap
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• Re: The Linux Storage and Filesystem Summit Call for Proposals
  • From: James Bottomley
• RE: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Eyal Shani
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• SATA II generation controllers reset problem
  • From: Vladimir Krivopalov
• Re: Please add ST3120827AS 3.42 to NCQ blacklist
  • From: Robert Hancock
• Re: libata timeouts when stressing a Samsung HDD
  • From: Robert Hancock
• Re: Port Multiplier access with Sil 3124
  • From: Robert Hancock
• Re: [patch for 2.6.29? 2/4] pata_amd: program FIFO
  • From: Robert Hancock
• Re: Drives which perform frequent head unloads under Linux
  • From: Tejun Heo
• Re: Please add ST3120827AS 3.42 to NCQ blacklist
  • From: Tejun Heo
• [PATCH #upstream-fixes] sata_nv: give up hardreset on nf2
  • From: Tejun Heo
• Re: libata timeouts when stressing a Samsung HDD
  • From: Chuck Ebbert
• ahci fails with SATA DVD drive, IDE mode works
  • From: Chuck Ebbert
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• Re: libata timeouts when stressing a Samsung HDD
  • From: Jeff Garzik
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• [patch for 2.6.29? 4/4] pata_it821x: resume from hibernation fails with RAID volume
  • From: akpm
• Re: [patch for 2.6.29? 3/4] pata_legacy: for VLB 32bit PIO don't try tricks with slop
  • From: Jeff Garzik
• Re: [patch for 2.6.29? 2/4] pata_amd: program FIFO
  • From: Jeff Garzik
• Re: [patch for 2.6.29? 1/4] drivers/ata/sata_sil.c needs dmi.h
  • From: Jeff Garzik
• [patch for 2.6.29? 2/4] pata_amd: program FIFO
  • From: akpm
• [patch for 2.6.29? 3/4] pata_legacy: for VLB 32bit PIO don't try tricks with slop
  • From: akpm
• [patch for 2.6.29? 1/4] drivers/ata/sata_sil.c needs dmi.h
  • From: akpm
• Re: libata timeouts when stressing a Samsung HDD
  • From: Chuck Ebbert
• Re: libata timeouts when stressing a Samsung HDD
  • From: Chuck Ebbert
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Andrew Victor
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one
  • From: Sergei Shtylyov
• Add to storage-fixup.conf
  • From: Silvia Fuhrmann
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/6] ide: pass command to ide_map_sg()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Borislav Petkov
• Re: [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Sergei Shtylyov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Borislav Petkov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Sergei Shtylyov
• Bad module reference counter
  • From: Stanislaw Gruszka
• Re: [PATCH 0/6] ide: more unifications of ATA and ATAPI support
  • From: Borislav Petkov
• Re: [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Borislav Petkov
• Re: [PATCH 1/6] ide: pass command to ide_map_sg()
  • From: Borislav Petkov
• Re: libata timeouts when stressing a Samsung HDD
  • From: Mark Lord
• Re: Processes dying with ENXIO or EINTR - disk related?
  • From: Tejun Heo
• Re: Port Multiplier access with Sil 3124
  • From: Tejun Heo
• Re: Port Multiplier access with Sil 3124
  • From: Tejun Heo
• Re: Processes dying with ENXIO or EINTR - disk related?
  • From: Yan Seiner
• Re: [PATCH] Resume from hibernation fails with pata_it821x RAID volume
  • From: Tejun Heo
• Re: libata timeouts when stressing a Samsung HDD
  • From: Tejun Heo
• Re: Processes dying with ENXIO or EINTR - disk related?
  • From: Tejun Heo
• Re: [PATCH] ide: move request type specific code from ide_end_drive_cmd() to callers (v2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH #upstream-fixes] sata_promise: request follow-up SRST
  • From: Jeff Garzik
• Re: [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one
  • From: Sergei Shtylyov
• Re: [PATCH #upstream-fixes] sata_promise: request follow-up SRST
  • From: Mikael Pettersson
• Re: [PATCH #upstream-fixes] sata_promise: request follow-up SRST
  • From: Jeff Garzik
• Re: Port Multiplier access with Sil 3124
  • From: Jeff Garzik
• Re: Port Multiplier access with Sil 3124
  • From: Greg Freemyer
• Re: Port Multiplier access with Sil 3124
  • From: Linda Walsh
• Re: [PATCH] ide.c 'clear' fix, ide=nodma documentation
  • From: David Fries
• Re: Port Multiplier access with Sil 3124
  • From: Jeff Garzik
• [PATCH 6/6] ide: keep track of number of bytes instead of sectors in struct ide_cmd
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/6] ide: remove ide_execute_pkt_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/6] ide: add ->dma_expiry method and remove ->dma_exec_cmd one
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/6] ide: set hwif->expiry prior to calling [__]ide_set_handler()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/6] ide: use do_rw_taskfile() for ATA_CMD_PACKET commands
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/6] ide: pass command to ide_map_sg()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/6] ide: more unifications of ATA and ATAPI support
  • From: Bartlomiej Zolnierkiewicz
• Re: Port Multiplier access with Sil 3124
  • From: Greg Freemyer
• Re: Port Multiplier access with Sil 3124
  • From: Linda Walsh
• Re: Port Multiplier access with Sil 3124
  • From: Linda Walsh
• [PATCH] libata: change drive ready wait after hard reset to 5s
  • From: Stuart_Hayes
• Re: linux-next: Tree for February 9 (ide-dma)
  • From: Randy Dunlap
• Re: Port Multiplier access with Sil 3124
  • From: Mark Lord
• [PATCH 9/9] ide: remove ide_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/9] ide: use ide_end_rq() in ide_complete_rq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/9] ide: pass number of bytes to complete to ide_complete_rq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/9] ide: remove BUG() from ide_complete_rq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/9] ide: move rq->errors quirk out from ide_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/9] ide: pass error value to ide_complete_rq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/9] ide: sanitize ide_end_rq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/9] ide: add ide_end_rq()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/9] ide: make ide_special_rq() BUG() on unknown requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/9] ide: unify request completion methods
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide.c 'clear' fix, ide=nodma documentation
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Bartlomiej Zolnierkiewicz
• Re: linux-next: Tree for February 9 (ide-dma)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Hugh Dickins
• Re: linux-next: Tree for February 9 (ide-dma)
  • From: Randy Dunlap
• Re: [PATCH] [resend] Resume from hibernation fails with pata_it821x RAID volume
  • From: Ondrej Zary
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• Re: Port Multiplier access with Sil 3124
  • From: Greg Freemyer
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• [PATCH 3/3 v3] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Hugh Dickins
• Re: Port Multiplier access with Sil 3124
  • From: Grant Grundler
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Jeff Garzik
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Ric Wheeler
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Ric Wheeler
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Mikael Pettersson
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Hugh Dickins
• Port Multiplier access with Sil 3124
  • From: Linda Walsh
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Matthew Wilcox
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Matthew Wilcox
• Re: [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Alan Cox
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Greg Freemyer
• [PATCH] libata-sff: fix 32-bit PIO regression
  • From: Sergei Shtylyov
• Re: [bug] sata detection problem
  • From: Robert Hancock
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Atsushi Nemoto
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Ric Wheeler
• Re: [PATCH 09/15] ide: add "flagged" taskfile flags to struct ide_taskfile
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Sergei Shtylyov
• Re: [PATCH] ide: Add tx4938ide driver (v2)
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: David Woodhouse
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Matthew Wilcox
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Jeff Garzik
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Sergei Shtylyov
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: James Bottomley
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Matthew Wilcox
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Matthew Wilcox
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Ric Wheeler
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Atsushi Nemoto
• Re: TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: James Bottomley
• TRIM vs UNMAP vs WRITE SAME and thin devices
  • From: Ric Wheeler
• Re: [PATCH] [resend] Resume from hibernation fails with pata_it821x RAID volume
  • From: Ondrej Zary
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Sergei Shtylyov
• Re: [PATCH] [resend] Resume from hibernation fails with pata_it821x RAID volume
  • From: Alan Cox
• Re: [PATCH] [resend] Resume from hibernation fails with pata_it821x RAID volume
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• [PATCH] [resend] Resume from hibernation fails with pata_it821x RAID volume
  • From: Ondrej Zary
• Re: Suggestions for debugging ata_piix and ahci driver failures on Xen pv_ops dom0 kernel (2.6.29-rcX)
  • From: Pasi Kärkkäinen
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• [PATCH 3/3 v2] AT91: initialize Compact Flash on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• [PATCH 2/3 v2] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [PATCH 09/15] ide: add "flagged" taskfile flags to struct ide_taskfile
  • From: Stephen Rothwell
• Re: Suggestions for debugging ata_piix and ahci driver failures on Xen pv_ops dom0 kernel (2.6.29-rcX)
  • From: Robert Hancock
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: use ide_complete_cmd() for REQ_UNPARK_HEADS
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: move request type specific code from ide_end_drive_cmd() to callers (v2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/4] ide: remove IDE_ARCH_LOCK
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Andrew Victor
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Andrew Victor
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• [PATCH 02/02] sata_mv: enable ATAPI DMA for GEN_IIE (v2)
  • From: Mark Lord
• [PATCH 01/02] sata_mv: cache frequently read port registers
  • From: Mark Lord
• Re: [PATCH] sata_mv: enable ATAPI DMA for GEN_IIE chips
  • From: Mark Lord
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Suggestions for debugging ata_piix and ahci driver failures on Xen pv_ops dom0 kernel (2.6.29-rcX)
  • From: Pasi Kärkkäinen
• Re: [PATCH 0/8] ide: remove ->end_request method
  • From: Borislav Petkov
• Re: [PATCH 2/4] ide: remove IDE_ARCH_LOCK
  • From: Geert Uytterhoeven
• [PATCH] sata_mv: enable ATAPI DMA for GEN_IIE chips
  • From: Mark Lord
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: New CD/DVD reports 'Can Play Audio NO'
  • From: D Bray
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Atsushi Nemoto
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• [Bug #12263] Sata soft reset filling log
  • From: Rafael J. Wysocki
• Re: [PATCH 2/3] ide: add at91_ide driver
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Sergei Shtylyov
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• Re: [stable] [Bugme-new] [Bug 12351] New: sata_nv hotplug not work in 2.6.27.10
  • From: Greg KH
• [PATCH] [resend] Resume from hibernation fails with pata_it821x RAID volume
  • From: Ondrej Zary
• Re: [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Andrew Victor
• Re: sata_via: write errors on SATA drive connected to VT6421
  • From: Jeff Garzik
• Re: sata_via: write errors on SATA drive connected to VT6421
  • From: Landry Breuil
• Re: sata_via: write errors on SATA drive connected to VT6421
  • From: Jeff Garzik
• Re: sata_via: write errors on SATA drive connected to VT6421
  • From: Robert Hancock
• sata_via: write errors on SATA drive connected to VT6421
  • From: Landry Breuil
• Drives which perform frequent head unloads under Linux
  • From: Francois Cartegnie
• Re: [PATCH] block: export SSD/non-rotational queue flag through sysfs
  • From: Pierre Ossman
• Re: [PATCH] Fix sata_sil compilation error with libata debug enabled (2.6.29-rcX)
  • From: Pasi Kärkkäinen
• [PATCH 3/3] AT91: initialize IDE driver on AT91SAM9263 cpu
  • From: Stanislaw Gruszka
• [PATCH 2/3] ide: add at91_ide driver
  • From: Stanislaw Gruszka
• [PATCH 1/3] ide: allow to wrap interrupt handler
  • From: Stanislaw Gruszka
• [PATCH 0/3] at91_ide driver submission
  • From: Stanislaw Gruszka
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [PATCH 06/07] sata_mv: introduce support for ATAPI devices
  • From: Jeff Garzik
• Re: [PATCH 2/5] pata-rb532-cf: replace rb532_pata_finish_io()
  • From: Jeff Garzik
• Re: [PATCH 03/07] sata_mv: restructure mv_qc_issue
  • From: Jeff Garzik
• Re: [PATCH 01/07] sata_mv: cleanup chipset GENeration FLAGS
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes 1/2] pata_atiixp: update port enabledness test handling
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] sata_nv: ck804 has borked hardreset too
  • From: Jeff Garzik
• Re: [PATCH 8/8] libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book
  • From: Jeff Garzik
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Jeff Garzik
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Jeff Garzik
• Re: [PATCH resend] ide/libata: fix ata_id_is_cfa() (take 4)
  • From: Jeff Garzik
• Re: [PATCH -next] libata: fix kernel-doc warnings
  • From: Jeff Garzik
• Re: [PATCH] ahci: add a module parameter to ignore the SSS flags for async scanning
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: Fix chip type for Hightpoint RocketRaid 1740/1742
  • From: Jeff Garzik
• Re: [PATCH] Fix sata_sil compilation error with libata debug enabled (2.6.29-rcX)
  • From: Jeff Garzik
• Re: [stable] [Bugme-new] [Bug 12351] New: sata_nv hotplug not work in 2.6.27.10
  • From: Robert Hancock
• Re: [stable] [Bugme-new] [Bug 12351] New: sata_nv hotplug not work in 2.6.27.10
  • From: Greg KH
• [PATCH] Resume from hibernation fails with pata_it821x RAID volume
  • From: Ondrej Zary
• libata timeouts when stressing a Samsung HDD
  • From: Chuck Ebbert
• [PATCH 12/14] ide: use ide_complete_cmd() for head unload commands
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/14] ide: unify exit paths in task_pio_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/14] ide: sanitize ide_finish_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/14] ide: use ide_complete_cmd() for PM commands
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/14] ide: move command related fields from ide_hwif_t to struct ide_cmd
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/14] ide: task_error() -> task_error_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/14] ide: pass command instead of request to ide_pio_datablock()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/14] ide: ide_task_t -> struct ide_cmd
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/14] ide: inline task_in_unexpected() into task_pio_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/14] ide: merge task_{in,out}_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/14] ide: use ata_tf_protocols enums
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/14] ide: set IDE_TFLAG_WRITE basing on data phase used in ide_taskfile_ioctl()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/14] ide: remove ide_task_t typedef
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/14] ide: call ide_build_sglist() prior to ->dma_setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/14] ide: use blk_fs_request() check in ide-taskfile.c
  • From: Bartlomiej Zolnierkiewicz
• Processes dying with ENXIO or EINTR - disk related?
  • From: Yan Seiner
• [git pull] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Jaswinder Singh Rajput
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 02/15] scc_pata: remove DECLARE_SCC_DEV() macro
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] IDE: Unregister devices if initialization fails.
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata: change drive ready wait after hard reset to 5s
  • From: Mario Limonciello
• [PATCH] libata: change drive ready wait after hard reset to 5s
  • From: Stuart_Hayes
• Re: [PATCH 02/15] scc_pata: remove DECLARE_SCC_DEV() macro
  • From: Daniel K.
• Re: Seagate disk freeze for 30 seconds then comes back (RecovComm 10B8B)
  • From: Catalin(ux) M. BOIE
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Sergei Shtylyov
• Please add ST3120827AS 3.42 to NCQ blacklist
  • From: Giulio Orsero
• Re: [RFC][PATCH] at91_ide driver
  • From: Stanislaw Gruszka
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Hugh Dickins
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Sergei Shtylyov
• Re: [PATCH] IDE: Unregister devices if initialization fails.
  • From: Ian Campbell
• Re: [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Geert Uytterhoeven
• Re: DMA breakage in 2.6.29-rc*
  • From: Benjamin Herrenschmidt
• Re: DMA breakage in 2.6.29-rc*
  • From: Benjamin Herrenschmidt
• [PATCH 05/07] sata_mv: mv_fill_sg fixes v2
  • From: Mark Lord
• Re: [PATCH 05/07] sata_mv: mv_fill_sg fixes
  • From: Mark Lord
• Re: [PATCH 04/07] sata_mv: update ata_qc_from_tag
  • From: Mark Lord
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Hugh Dickins
• Re: [PATCH 05/07] sata_mv: mv_fill_sg fixes
  • From: Grant Grundler
• Re: [PATCH #upstream-fixes] sata_nv: ck804 has borked hardreset too
  • From: Robert Hancock
• Re: [PATCH 04/07] sata_mv: update ata_qc_from_tag
  • From: Grant Grundler
• [PATCH 8/8] ide: return request status from ->pc_callback method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/8] ide: remove ->end_request method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/8] ide-{floppy,tape}: cleanup ide*_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/8] ide: use ->end_request only for private device driver requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/8] ide: move ->failed_pc to ide_drive_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/8] ide-tape: remove superfluous tape->lock
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/8] ide-floppy: remove superfluous check from ide_floppy_end_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/8] ide: remove no longer needed PC_FLAG_TIMEDOUT packet command flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/8] ide: remove ->end_request method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] au1xxx-ide: auide_dma_end() cleanup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] trm290: trm290_dma_setup() fix
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] icside: icside_dma_setup() fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 02/15] scc_pata: remove DECLARE_SCC_DEV() macro
  • From: Sergei Shtylyov
• [PATCH 15/15] ide: move smart_enable() call out from get_smart_data()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/15] ide: remove ->data_phase field from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/15] ide: no need to read Status and Error registers for "empty" taskfile requests
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/15] ide: move request type specific code from ide_end_drive_cmd() to callers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/15] ide: factor out completion of taskfile from ide_end_drive_cmd()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/15] ide: complete power step in ide_complete_pm_request()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/15] ide: add "flagged" taskfile flags to struct ide_taskfile
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/15] ide: add IDE_HFLAG_4DRIVES host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/15] ide: add IDE_HFLAG_DTC2278 host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/15] ide: remove now superfluous check from ide_host_register()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/15] ide: allow host drivers to specify IRQ flags
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/15] ide: fix error message in pre_task_out_intr()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/15] ide: fix memleak on failure in probe_for_drive()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/15] scc_pata: remove DECLARE_SCC_DEV() macro
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/15] ide: include <asm/ide.h> only when needed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/15] weekly IDE updates
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC][PATCH] at91_ide driver
  • From: Bartlomiej Zolnierkiewicz
• Re: DMA breakage in 2.6.29-rc*
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] IDE: Unregister devices if initialization fails.
  • From: Bartlomiej Zolnierkiewicz
• Re: Some IDE issues with 2.6.28 on PC-Engines ALIX2
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/3] ide-cd: use ide_drive_t's rq in cdrom_queue_request_sense
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2] IDE: palm_bk3710: use ioremap instead of arch-specific IO_ADDRESS()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/4] ide: remove IDE_ARCH_INTR
  • From: Bartlomiej Zolnierkiewicz
• [PATCH resend] ide/libata: fix ata_id_is_cfa() (take 4)
  • From: Sergei Shtylyov
• [PATCH] ide/libata: fix ata_id_is_cfa() (take 4)
  • From: Sergei Shtylyov
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Tejun Heo
• Re: [PATCHSET] block,scsi,libata: implement alt_size
  • From: Jeff Garzik
• [PATCH 2/3] dmraid: add alt_size to dev_info
  • From: Tejun Heo
• [PATCH 3/3] dmraid: make nv use alt_size if available
  • From: Tejun Heo
• [PATCH 1/3] dmraid: set read_info to @offset by default in read_raid_dev()
  • From: Tejun Heo
• [PATCHSET] dmraid: use alt_size
  • From: Tejun Heo
• [PATCH 1/3] block: add alt_size
  • From: Tejun Heo
• [PATCH 3/3] libata: export HPA size as alt_size
  • From: Tejun Heo
• [PATCHSET] block,scsi,libata: implement alt_size
  • From: Tejun Heo
• [PATCH 2/3] scsi: add scsi_device->alt_capacity
  • From: Tejun Heo
• [PATCH #upstream-fixes] sata_nv: ck804 has borked hardreset too
  • From: Tejun Heo
• Re: [PATCH #upstream] ahci/sata_vsc: drop intx manipulation on msi enable
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes 1/2] pata_atiixp: update port enabledness test handling
  • From: Tejun Heo
• Re: 2.6.28: All I/O, D-state: 3ware 9650SE-16ML/Intel/965/MTRR/PAT?
  • From: Justin Piszcz
• Re: Some IDE issues with 2.6.28 on PC-Engines ALIX2
  • From: Sergei Shtylyov
• Re: 2.6.28: All I/O, D-state: 3ware 9650SE-16ML/Intel/965/MTRR/PAT?
  • From: Christoph Hellwig
• Re: 2.6.28: All I/O, D-state: 3ware 9650SE-16ML/Intel/965/MTRR/PAT?
  • From: Justin Piszcz
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Sergei Shtylyov
• Re: Some IDE issues with 2.6.28 on PC-Engines ALIX2
  • From: Mark Lord
• Re: Some IDE issues with 2.6.28 on PC-Engines ALIX2
  • From: Christoph .J Thompson
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Alan Cox
• Re: 2.6.29-rc libata sff 32bit PIO regression
  • From: Sergei Shtylyov
• Re: Some IDE issues with 2.6.28 on PC-Engines ALIX2
  • From: Martin K. Petersen
• Re: Some IDE issues with 2.6.28 on PC-Engines ALIX2
  • From: Sergei Shtylyov
• Re: Some IDE issues with 2.6.28 on PC-Engines ALIX2
  • From: Sergei Shtylyov
• Re: Some IDE issues with 2.6.28 on PC-Engines ALIX2
  • From: Martin K. Petersen
• Re: [BUG] 2.6.29-rc1: ata_piix boot hang due to bmdma32 change
  • From: Mikael Pettersson