Wednesday 18 February 2009 22:25:19 Bartlomiej Zolnierkiewicz napisał(a): > > I entered a problem with double decreasing module reference counter > > where it become "negative", here is the usage scenario: > > > > # modprobe at91_ide > > # modprobe ide_gd_mod > > # lsmod > > Module Size Used by Not tainted > > ide_gd_mod 22948 0 > > at91_ide 4672 0 > > ide_core 77020 2 ide_gd_mod,at91_ide > > # rmmod ide_gd_mod > > # lsmod > > Module Size Used by Not tainted > > at91_ide 4672 4294967295 > > ide_core 77020 1 at91_ide > > > > Note when I first remove at91_ide module and then ide_gd_mod > > everyting is ok. > > > > I tired to debug issue and I did not found any suspicious in at91_ide. > > I think probable reason is double free in ide-gd.c . Here is patch with > > workaround (or maybe it is a real fix, but I'm not sure): > > > > diff --git a/drivers/ide/ide-gd.c b/drivers/ide/ide-gd.c > > index 7857b20..31ae04e 100644 > > --- a/drivers/ide/ide-gd.c > > +++ b/drivers/ide/ide-gd.c > > @@ -70,8 +70,6 @@ static void ide_gd_remove(ide_drive_t *drive) > > del_gendisk(g); > > > > drive->disk_ops->flush(drive); > > - > > - ide_disk_put(idkp); > > } > > > > static void ide_disk_release(struct kref *kref) > > > > If this patch is ok, maybe similar things need to be done also in ide-cd and > > perhaps other device type modules. > > Seems like ide_device_put() needs the same module_refcount() check that > is present in scsi_device_put() so removal of device driver won't trigger > a spurious module_put() on a host driver? I little surprise about scsi code (linux-scsi ML CC). Is comment inside scsi_device_put() function correct? Why scsi_device_get() not check try_module_get() return value? And most importand: there is reference counter check before put, so it can be 0, but data does it protect is in use ? Adding module_refcount() != 0 to ide_device_put() helps only partially, below commands sequence give oops [1]. # modprobe at91_ide # modprobe ide_gd_mod # rmmod ide_gd_mod # modprobe ide_gd_mod # rmmod at91_ide Oops happens because previous "rmmod ide_gd_mod" decrease some reference counter in ide_device_put() and in "rmmod at91_ide" function del_gendisk() cause call to drive_release_dev(), which free drive->id before ide_disk_flush() . This function oops with NULL driver->id. There is no oops with my workaround, when I just remove ide_disk_put() from ide_gd_remove(). It's strange why there is lack of symmetrical _put/_get calls, ide_gd_probe() has no call to ide_disk_get(). Cheers Stanislaw Gruszka [1]: [ 5043.790000] Unable to handle kernel NULL pointer dereference at virtual address 000000a6 [ 5043.800000] pgd = c3a40000 [ 5043.800000] [000000a6] *pgd=23b55031, *pte=00000000, *ppte=00000000 [ 5043.810000] Internal error: Oops: 17 [#1] [ 5043.810000] Modules linked in: ide_gd_mod at91_ide(-) ide_core [last unloaded: ide_gd_mod] [ 5043.810000] CPU: 0 Not tainted (2.6.29-rc3 #34) [ 5043.810000] PC is at ide_disk_flush+0x18/0xe4 [ide_gd_mod] [ 5043.810000] LR is at ide_gd_remove+0x34/0x40 [ide_gd_mod] [ 5043.810000] pc : [<bf035c6c>] lr : [<bf035320>] psr: 80000013 [ 5043.810000] sp : c3bb1d74 ip : c3bb1db0 fp : c3bb1dac [ 5043.810000] r10: 0000b8e8 r9 : c3bb0000 r8 : c0028f24 [ 5043.810000] r7 : c3b9cde0 r6 : c3a8de00 r5 : c3b57a00 r4 : c3b98000 [ 5043.810000] r3 : bf037ea0 r2 : 00000000 r1 : 00000051 r0 : c3b98000 [ 5043.810000] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 5043.810000] Control: 0005317f Table: 23a40000 DAC: 00000015 [ 5043.810000] Process rmmod (pid: 11458, stack limit = 0xc3bb0260) [ 5043.810000] Stack: (0xc3bb1d74 to 0xc3bb2000) {snip binary stack} [ 5043.810000] Backtrace: [ 5043.810000] [<bf035c54>] (ide_disk_flush+0x0/0xe4 [ide_gd_mod]) from [<bf035320>] (ide_gd_remove+0x34/0x40 [ide_gd_mod]) [ 5043.810000] r4:c3b98000 [ 5043.810000] [<bf0352ec>] (ide_gd_remove+0x0/0x40 [ide_gd_mod]) from [<bf00b198>] (generic_ide_remove+0x24/0x2c [ide_core]) [ 5043.810000] r6:c3b984f8 r5:bf03a744 r4:c3b98090 [ 5043.810000] [<bf00b174>] (generic_ide_remove+0x0/0x2c [ide_core]) from [<c0170a38>] (__device_release_driver+0x6c/0x88) [ 5043.810000] [<c01709cc>] (__device_release_driver+0x0/0x88) from [<c0170b08>] (device_release_driver+0x24/0x30) [ 5043.810000] r5:c3b98118 r4:c3b98090 [ 5043.810000] [<c0170ae4>] (device_release_driver+0x0/0x30) from [<c016fd68>] (bus_remove_device+0x80/0x94) [ 5043.810000] r5:c3b98090 r4:c3b980c0 [ 5043.810000] [<c016fce8>] (bus_remove_device+0x0/0x94) from [<c016e58c>] (device_del+0x104/0x154) [ 5043.810000] r5:c3b98404 r4:c3b98090 [ 5043.810000] [<c016e488>] (device_del+0x0/0x154) from [<c016e5f0>] (device_unregister+0x14/0x20) [ 5043.810000] r6:00000001 r5:c3b98404 r4:c3b98090 [ 5043.810000] [<c016e5dc>] (device_unregister+0x0/0x20) from [<bf010614>] (__ide_port_unregister_devices+0x30/0x54 [ide_core]) [ 5043.810000] r4:c3b98000 [ 5043.810000] [<bf0105e4>] (__ide_port_unregister_devices+0x0/0x54 [ide_core]) from [<bf0106c8>] (ide_host_remove+0x70/0x108 [ide_core]) [ 5043.810000] r6:00000000 r5:c3bb0000 r4:c3b98400 [ 5043.810000] [<bf010658>] (ide_host_remove+0x0/0x108 [ide_core]) from [<bf023634>] (at91_ide_remove+0x14/0x1c [at91_ide]) [ 5043.810000] r7:00000880 r6:bf024054 r5:bf024054 r4:c02f3500 [ 5043.810000] [<bf023620>] (at91_ide_remove+0x0/0x1c [at91_ide]) from [<c0171b40>] (platform_drv_remove+0x20/0x24) [ 5043.810000] [<c0171b20>] (platform_drv_remove+0x0/0x24) from [<c0170a38>] (__device_release_driver+0x6c/0x88) [ 5043.810000] [<c01709cc>] (__device_release_driver+0x0/0x88) from [<c0170abc>] (driver_detach+0x68/0x90) [ 5043.810000] r5:c02f3588 r4:c02f3500 [ 5043.810000] [<c0170a54>] (driver_detach+0x0/0x90) from [<c016fc40>] (bus_remove_driver+0x8c/0xb4) [ 5043.810000] r6:c0307320 r5:bf0240a0 r4:bf024054 [ 5043.810000] [<c016fbb4>] (bus_remove_driver+0x0/0xb4) from [<c0170f54>] (driver_unregister+0x44/0x48) [ 5043.810000] r6:00000000 r5:bf0240a0 r4:bf024054 [ 5043.810000] [<c0170f10>] (driver_unregister+0x0/0x48) from [<c0171ce0>] (platform_driver_unregister+0x14/0x18) [ 5043.810000] r6:bf0241c0 r5:bf0240a0 r4:00000000 [ 5043.810000] [<c0171ccc>] (platform_driver_unregister+0x0/0x18) from [<bf023618>] (at91_ide_exit+0x14/0x1c [at91_ide]) [ 5043.810000] [<bf023604>] (at91_ide_exit+0x0/0x1c [at91_ide]) from [<c005b850>] (sys_delete_module+0x1b8/0x230) [ 5043.810000] [<c005b698>] (sys_delete_module+0x0/0x230) from [<c0028d80>] (ret_fast_syscall+0x0/0x2c) [ 5043.810000] r7:00000081 r6:becd1bcc r5:00000880 r4:becd1cd8 [ 5043.810000] Code: e24cb004 e24dd028 e590201c e1a04000 (e1d21ab6) [ 5044.320000] ---[ end trace 120de1a999313176 ]--- -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html