Hanno Böck reported a problem where an old Conner CP30254 240MB hard drive was reported as 1.1TB in capacity by libata: http://lkml.org/lkml/2009/2/13/134 This was caused by libata trusting the drive's reported current capacity in sectors in identify words 57 and 58 if the drive does not support LBA and the current CHS translation values appear valid. Unfortunately it seems older ATA specs were vague about what this field should contain and a number of drives used values with wrong byte order or that were totally bogus. There's no unique information that it conveys and so we can just calculate the number of sectors from the reported current CHS values. Signed-off-by: Robert Hancock <hancockrwd@xxxxxxxxx> --- Should likely go into -next for testing for a while. Of course, the fact that this problem showed up in the first place shows that the number of people that test libata with such boat anchors is fairly small :-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 9fbf059..5389cbc 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1327,7 +1327,7 @@ static u64 ata_id_n_sectors(const u16 *id) return ata_id_u32(id, 60); } else { if (ata_id_current_chs_valid(id)) - return ata_id_u32(id, 57); + return id[54] * id[55] * id[56]; else return id[1] * id[3] * id[6]; } -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
