From: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
Subject: [PATCH] ide: set IDE_TFLAG_WRITE basing on data phase used in ide_taskfile_ioctl()
Also take care of fixing up incorrect TASKFILE_IN_DMA[Q] data phase when
IDE_DRIVE_TASK_RAW_WRITE is requested (no need to do it for TASKFILE_NO_DATA
and TASKFILE_[MULTI]_IN -- it had no chance of working previously).
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/ide-taskfile.c | 13 +++++++++----
1 file changed, 9 insertions(+), 4 deletions(-)
Index: b/drivers/ide/ide-taskfile.c
===================================================================
--- a/drivers/ide/ide-taskfile.c
+++ b/drivers/ide/ide-taskfile.c
@@ -582,7 +582,14 @@ int ide_taskfile_ioctl(ide_drive_t *driv
if (req_task->in_flags.b.data)
cmd.ftf_flags |= IDE_FTFLAG_IN_DATA;
- switch(req_task->data_phase) {
+ if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE) {
+ /* fixup data phase if needed */
+ if (req_task->data_phase == TASKFILE_IN_DMAQ ||
+ req_task->data_phase == TASKFILE_IN_DMA)
+ cmd.data_phase = TASKFILE_OUT_DMA;
+ }
+
+ switch (cmd.data_phase) {
case TASKFILE_MULTI_OUT:
if (!drive->mult_count) {
/* (hs): give up if multcount is not set */
@@ -597,6 +604,7 @@ int ide_taskfile_ioctl(ide_drive_t *driv
/* fall through */
case TASKFILE_OUT_DMAQ:
case TASKFILE_OUT_DMA:
+ cmd.tf_flags |= IDE_TFLAG_WRITE;
nsect = taskout / SECTOR_SIZE;
data_buf = outbuf;
break;
@@ -637,9 +645,6 @@ int ide_taskfile_ioctl(ide_drive_t *driv
}
}
- if (req_task->req_cmd == IDE_DRIVE_TASK_RAW_WRITE)
- cmd.tf_flags |= IDE_TFLAG_WRITE;
-
err = ide_raw_taskfile(drive, &cmd, data_buf, nsect);
memcpy(req_task->hob_ports, &cmd.tf_array[0],
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
