Re: sata_promise fails to detect all 4 HDD on the TX4 since 2.6.26

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If you want the full kernel boot log I can get it to you in a couple
of days. But here is what I remember from the kernel logs. It probes
each of the 4 ports, and it always thinks that the first port is "link
down". The drives I have plugged into it are samsung HD753LJ


On Wed, Feb 25, 2009 at 1:28 AM, Tejun Heo <tj@xxxxxxxxxx> wrote:
> Mike Cui wrote:
>> Hi,
>>
>> I tried to update to Ubuntu 8.10 from 8.04 last week, and noticed that
>> after the update the sata_promise driver can no longer detect all 4
>> HDDs that I have plugged into the SATAII300TX4 card. It always reports
>> that the link is down on the first port. I also tried booting a gentoo
>> kernel with 2.6.26, same problem. However, Ubuntu 8.04 with 2.6.25
>> seems fine. Is this a known problem?
>
> Hmm... Can you please install to another disk and try 2.6.28.7 and
> post the kernel boot log if it fails too?
>
> Thanks.
>
> --
> tejun
>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux