I have a ProLiant BL30p G1 machine running Debian Lenny (2.6.26 kernel).
It also has two identical, 2.5 inch WDC WD2500BEVE-00WZT0 IDE drives
(new drives, no smart/badblock errors). Both drives are connected to a
single IDE channel this machine has.
"hdparm -t" gives me different results for these drives: ~10 MB/s for
hda, and ~20 MB/s for hdb with "serverworks" driver on Debian's 2.6.26
kernel.
When using "pata-serverworks" with 2.6.28.7 kernel, hdparm shows the
same results (~10 MB/s for sda, ~20 MB/s for sdb).
However, when I run "dd if=/dev/sda of=/dev/null bs=64k", I can see with
iostat that for the first 7-8 seconds, reads are with ~10 MB/s speed.
Then, reads from sda are with ~20 MB/s or more and are on par with sdb.
Similar dd test for sdb shows that it delivers with speed of ~20 MB/s
from the first second.
Is there an explanation for that?
--
Tomasz Chmielewski
http://wpkg.org
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
