Tomasz Chmielewski wrote:
Mark Lord schrieb:
Everything looks configured correctly, so the only explanations
for the slow (10/20MB/sec) speeds are the CPU/RAM, or other system
activity.
It's a pretty powerful machine with plenty of RAM, no other activity.
As for the disparity in initial throughput between the master/slave
drives,
you could try reversing the two drives (swap them on the cable if using
"cable select", otherwise rejumper the master/slave setup). Then see
if the
slow start follows the specific drive to its new position on the cable,
or if the master ("a") drive is always slower.
Yes, "reversing" the drives makes the master slower (at least initially).
Controller's "feature"?
..
Kinda looks that way. Perhaps the driver isn't setting the master device
up with optimal settings somewhere.. FIFO sizes or something ??
Maybe somebody more familiar with serverworks stuff could have a look now.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
