On Saturday 07 March 2009, Sergei Shtylyov wrote: > Hello, I wrote: > > > Add support for the CompactFlash specific PIO modes 5/6 and MWDMA modes 3/4. > > > > Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx> > > > > --- > > Did two changes after Bart's review: > > - fixed wrong mask in ide_config_drive_speed(); > > - clarified comment in ide_pio_cycle_time(). > > > > This patch is against the current pata-2.6 series. Since there were no PIO5 > > capable hard drives produced and you also need 66 MHz input clock to actually > > get the difference WRT the setup timing programmed, I decided to simply replace > > the old non-standard PIO mode 5 timings with CFA specified ones. > > Phew, hopefully I haven't overlooked anything -- quite a lot had to be changed. > > > > Stanislaw, please give it a try -- I don't have any CF hardware now. > > > [...] > > Index: linux-2.6/drivers/ide/ide-iops.c > > =================================================================== > > --- linux-2.6.orig/drivers/ide/ide-iops.c > > +++ linux-2.6/drivers/ide/ide-iops.c > > @@ -389,6 +389,8 @@ int ide_config_drive_speed(ide_drive_t * > > id[ATA_ID_UDMA_MODES] &= ~0xFF00; > > id[ATA_ID_MWDMA_MODES] &= ~0x0F00; > > id[ATA_ID_SWDMA_MODES] &= ~0x0F00; > > + if (ata_id_is_cfa(id)) > > + id[ATA_ID_CFA_MODES] &= ~0x0FC0; > > > > Oops, won't this fragment clear the current DMA mode when setting PIO > mode (and so vice versa for CF)? Indeed, however since we never check selected modes later (except ide_id_dma_bug() but its intent is to check for buggy devices) there is no much point in all these id hacks and this seems to be the perfect opportunity to just remove them. Thanks, Bart -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html