Hello.
yanhua wrote:
The patch description wouldn't hurt, i.e. why this fixup is needed...
> diff --git a/drivers/ide/amd74xx.c b/drivers/ide/amd74xx.c
> index 77267c8..51b888f 100644
> --- a/drivers/ide/amd74xx.c
> +++ b/drivers/ide/amd74xx.c
The IDE patches should be posted to linux-ide mail list.
> @@ -23,6 +23,11 @@
>
> #define DRV_NAME "amd74xx"
>
> +static const char *am74xx_quirk_drives[] = {
> + "FUJITSU MHZ2160BH G2",
> + NULL
> +};
> +
> enum {
> AMD_IDE_CONFIG = 0x41,
> AMD_CABLE_DETECT = 0x42,
> @@ -112,6 +117,20 @@ static void amd_set_pio_mode(ide_drive_t *drive,
> const u8 pio)
> amd_set_drive(drive, XFER_PIO_0 + pio);
Your patches are seriously whitespace-damaged, i.e. all tabs seem to be
collapsed to a single space. You'll have to find a way to avoid that...
> }
>
> +static void amd_quirkproc(ide_drive_t *drive, const u8 pio)
Have you tried to compile this? The quirkproc() method only has one parameter.
> +{
> + const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
> +
> + for (list = am74xx_quirk_drives; *list != NULL; list++)
> + if (strstr(m, *list) != NULL) {
> + drive->quirk_list = 2;
> + return;
> + }
> +
> + drive->quirk_list = 0;
> +
> +}
> +
> static void amd7409_cable_detect(struct pci_dev *dev)
> {
> /* no host side cable detection */
> @@ -194,6 +213,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t
> *hwif)
> static const struct ide_port_ops amd_port_ops = {
> .set_pio_mode = amd_set_pio_mode,
> .set_dma_mode = amd_set_drive,
> + .quirkproc = amd_quirkproc,
> .cable_detect = amd_cable_detect,
> };
>
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
