Hi, On Wednesday 15 April 2009 16:34:22 Roderick Colenbrander wrote: > Hi, > > I'm using a Xilinx ML510 it features a PowerPC 440 cpu inside a > Virtex-5 FPGA. The board also contains a ALI M1533 south bridge > for IDE, USB and Audio. I did a lot of work to get the pci bus working > on this board and it works correctly but the default init code > of the alim15x3 driver doesn't work for me. The driver explicitly > disabled some initialization code for powerpc after uncommenting this > code it works properly. Benjamin Herrenschmidt and I think this > !CONFIG_PPC check should be removed because the system behaves > like a real 'x86' system (also the i8259 interrupt controller is used). Ben, I guess you are OK with the change and there are no longer other platforms requiring CONFIG_PPC check below? [I don't see your ACK here] > Regards, > Roderick Colenbrander > > > From 1c40c2f1485ecd3bc5ad7a3af537cb94de0877c3 Mon Sep 17 00:00:00 2001 > From: Roderick Colenbrander <thunderbird2k@xxxxxxxxx> > Date: Wed, 15 Apr 2009 10:45:17 +0200 > Subject: [PATCH] Use the 'x86' init_hwif code in the alim15x3 for > x86-like PowerPC boards like Xilinx ML310/410/510. Roderick, please add your "Signed-off-by:" line (per Documentation/SubmittingPatches). Thanks. > --- > drivers/ide/alim15x3.c | 9 +++++---- > 1 files changed, 5 insertions(+), 4 deletions(-) > > diff --git a/drivers/ide/alim15x3.c b/drivers/ide/alim15x3.c > index 537da1c..9176c0f 100644 > --- a/drivers/ide/alim15x3.c > +++ b/drivers/ide/alim15x3.c > @@ -402,14 +402,15 @@ static u8 ali_cable_detect(ide_hwif_t *hwif) > return cbl; > } > > -#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) > +#if !defined(CONFIG_SPARC64) > /** > * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff > * @hwif: interface to configure > * > * Obtain the IRQ tables for an ALi based IDE solution on the PC > - * class platforms. This part of the code isn't applicable to the > - * Sparc and PowerPC systems. > + * class platforms. This part of the code isn't applicable to > + * Sparc systems. It is usable on 'x86-like' PowerPC systems > + * which use a Ali M15x3 south bridge like e.g. Xilinx ML310/410/510. > */ > > static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) > @@ -455,7 +456,7 @@ static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif) > } > #else > #define init_hwif_ali15x3 NULL > -#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */ > +#endif /* !defined(CONFIG_SPARC64) */ > > /** > * init_dma_ali15x3 - set up DMA on ALi15x3 > -- > 1.5.6.3 -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
