On Tue, 9 Jun 2009, Bartlomiej Zolnierkiewicz wrote:
> On Tuesday 09 June 2009 13:44:25 Hugh Dickins wrote:
> >
> > But memset id in probe_for_drive() when it might be being reused -
> > or would it be better to memset it wherever it used to be kfreed?
>
> Please memset() it in ide_port_init_devices_data() -- this function
> is called before IDE device structure is going to be (re-)used.
That makes sense too, thanks, here we go...
[PATCH next] ide: fix PowerMac bootup oops
PowerMac bootup with CONFIG_IDE=y oopses in ide_pio_cycle_time():
because "ide: try to use PIO Mode 0 during probe if possible" causes
pmac_ide_set_pio_mode() to be called before drive->id has been set.
Bart points out other places which now need drive->id set earlier,
so follow his advice to allocate it in ide_port_alloc_devices()
(using kzalloc_node, without error message, as when allocating drive)
and memset it for reuse in ide_port_init_devices_data().
Fixed in passing: ide_host_alloc() was missing ide_port_free_devices()
from an error path.
Signed-off-by: Hugh Dickins <hugh.dickins@xxxxxxxxxxxxx>
---
drivers/ide/ide-probe.c | 47 ++++++++++++++++----------------------
1 file changed, 21 insertions(+), 26 deletions(-)
--- lnext/drivers/ide/ide-probe.c 2009-06-03 11:45:13.000000000 +0100
+++ linux/drivers/ide/ide-probe.c 2009-06-09 13:50:03.000000000 +0100
@@ -465,23 +465,8 @@ static u8 probe_for_drive(ide_drive_t *d
int rc;
u8 cmd;
- /*
- * In order to keep things simple we have an id
- * block for all drives at all times. If the device
- * is pre ATA or refuses ATA/ATAPI identify we
- * will add faked data to this.
- *
- * Also note that 0 everywhere means "can't do X"
- */
-
drive->dev_flags &= ~IDE_DFLAG_ID_READ;
- drive->id = kzalloc(SECTOR_SIZE, GFP_KERNEL);
- if (drive->id == NULL) {
- printk(KERN_ERR "ide: out of memory for id data.\n");
- return 0;
- }
-
m = (char *)&drive->id[ATA_ID_PROD];
strcpy(m, "UNKNOWN");
@@ -497,7 +482,7 @@ static u8 probe_for_drive(ide_drive_t *d
}
if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- goto out_free;
+ return 0;
/* identification failed? */
if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -521,7 +506,7 @@ static u8 probe_for_drive(ide_drive_t *d
}
if ((drive->dev_flags & IDE_DFLAG_PRESENT) == 0)
- goto out_free;
+ return 0;
/* The drive wasn't being helpful. Add generic info only */
if ((drive->dev_flags & IDE_DFLAG_ID_READ) == 0) {
@@ -535,9 +520,6 @@ static u8 probe_for_drive(ide_drive_t *d
}
return 1;
-out_free:
- kfree(drive->id);
- return 0;
}
static void hwif_release_dev(struct device *dev)
@@ -817,8 +799,6 @@ static int ide_port_setup_devices(ide_hw
if (ide_init_queue(drive)) {
printk(KERN_ERR "ide: failed to init %s\n",
drive->name);
- kfree(drive->id);
- drive->id = NULL;
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
continue;
}
@@ -947,9 +927,6 @@ static void drive_release_dev (struct de
blk_cleanup_queue(drive->queue);
drive->queue = NULL;
- kfree(drive->id);
- drive->id = NULL;
-
drive->dev_flags &= ~IDE_DFLAG_PRESENT;
complete(&drive->gendev_rel_comp);
@@ -1132,8 +1109,11 @@ static void ide_port_init_devices_data(i
ide_port_for_each_dev(i, drive, hwif) {
u8 j = (hwif->index * MAX_DRIVES) + i;
+ u16 *saved_id = drive->id;
memset(drive, 0, sizeof(*drive));
+ memset(saved_id, 0, SECTOR_SIZE);
+ drive->id = saved_id;
drive->media = ide_disk;
drive->select = (i << 4) | ATA_DEVICE_OBS;
@@ -1240,8 +1220,10 @@ static void ide_port_free_devices(ide_hw
ide_drive_t *drive;
int i;
- ide_port_for_each_dev(i, drive, hwif)
+ ide_port_for_each_dev(i, drive, hwif) {
+ kfree(drive->id);
kfree(drive);
+ }
}
static int ide_port_alloc_devices(ide_hwif_t *hwif, int node)
@@ -1255,6 +1237,18 @@ static int ide_port_alloc_devices(ide_hw
if (drive == NULL)
goto out_nomem;
+ /*
+ * In order to keep things simple we have an id
+ * block for all drives at all times. If the device
+ * is pre ATA or refuses ATA/ATAPI identify we
+ * will add faked data to this.
+ *
+ * Also note that 0 everywhere means "can't do X"
+ */
+ drive->id = kzalloc_node(SECTOR_SIZE, GFP_KERNEL, node);
+ if (drive->id == NULL)
+ goto out_nomem;
+
hwif->devices[i] = drive;
}
return 0;
@@ -1296,6 +1290,7 @@ struct ide_host *ide_host_alloc(const st
if (idx < 0) {
printk(KERN_ERR "%s: no free slot for interface\n",
d ? d->name : "ide");
+ ide_port_free_devices(hwif);
kfree(hwif);
continue;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
