Add ide_pio_need_iordy() helper and convert host drivers to use it.
This fixes it8172, it8213, pdc202xx_old, piix, slc90e66 and siimage
host drivers to handle IORDY correctly.
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
drivers/ide/at91_ide.c | 3 +--
drivers/ide/ide-xfer-mode.c | 6 ++++++
drivers/ide/it8172.c | 2 +-
drivers/ide/it8213.c | 2 +-
drivers/ide/pdc202xx_old.c | 2 +-
drivers/ide/piix.c | 2 +-
drivers/ide/siimage.c | 15 ++++++++-------
drivers/ide/sl82c105.c | 3 +--
drivers/ide/slc90e66.c | 2 +-
include/linux/ide.h | 1 +
10 files changed, 22 insertions(+), 16 deletions(-)
Index: b/drivers/ide/at91_ide.c
===================================================================
--- a/drivers/ide/at91_ide.c
+++ b/drivers/ide/at91_ide.c
@@ -185,8 +185,7 @@ static void at91_ide_set_pio_mode(ide_dr
timing = ide_timing_find_mode(XFER_PIO_0 + pio);
BUG_ON(!timing);
- if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
- !(ata_id_is_cfa(drive->id) && pio > 4))
+ if (ide_pio_need_iordy(drive, pio))
use_iordy = 1;
apply_timings(chipselect, pio, timing, use_iordy);
Index: b/drivers/ide/ide-xfer-mode.c
===================================================================
--- a/drivers/ide/ide-xfer-mode.c
+++ b/drivers/ide/ide-xfer-mode.c
@@ -107,6 +107,12 @@ u8 ide_get_best_pio_mode(ide_drive_t *dr
}
EXPORT_SYMBOL_GPL(ide_get_best_pio_mode);
+int ide_pio_need_iordy(ide_drive_t *drive, const u8 pio)
+{
+ return ata_id_pio_need_iordy(drive->id, pio);
+}
+EXPORT_SYMBOL_GPL(ide_pio_need_iordy);
+
int ide_set_pio_mode(ide_drive_t *drive, const u8 mode)
{
ide_hwif_t *hwif = drive->hwif;
Index: b/drivers/ide/it8172.c
===================================================================
--- a/drivers/ide/it8172.c
+++ b/drivers/ide/it8172.c
@@ -66,7 +66,7 @@ static void it8172_set_pio_mode(ide_driv
if (drive->media == ide_disk)
/* enable prefetch */
drive_enables |= 0x0004 << (drive->dn * 4);
- if (ata_id_has_iordy(drive->id))
+ if (ide_pio_need_iordy(drive, pio))
/* enable IORDY sample-point */
drive_enables |= 0x0002 << (drive->dn * 4);
Index: b/drivers/ide/it8213.c
===================================================================
--- a/drivers/ide/it8213.c
+++ b/drivers/ide/it8213.c
@@ -50,7 +50,7 @@ static void it8213_set_pio_mode(ide_driv
control |= 1; /* Programmable timing on */
if (drive->media != ide_disk)
control |= 4; /* ATAPI */
- if (pio > 2)
+ if (ide_pio_need_iordy(drive, pio))
control |= 2; /* IORDY */
if (is_slave) {
master_data |= 0x4000;
Index: b/drivers/ide/pdc202xx_old.c
===================================================================
--- a/drivers/ide/pdc202xx_old.c
+++ b/drivers/ide/pdc202xx_old.c
@@ -73,7 +73,7 @@ static void pdc202xx_set_mode(ide_drive_
* Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
*/
AP &= ~0x3f;
- if (ata_id_iordy_disable(drive->id))
+ if (ide_pio_need_iordy(drive, speed - XFER_PIO_0))
AP |= 0x20; /* set IORDY_EN bit */
if (drive->media == ide_disk)
AP |= 0x10; /* set Prefetch_EN bit */
Index: b/drivers/ide/piix.c
===================================================================
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -98,7 +98,7 @@ static void piix_set_pio_mode(ide_drive_
control |= 1; /* Programmable timing on */
if (drive->media == ide_disk)
control |= 4; /* Prefetch, post write */
- if (pio > 2)
+ if (ide_pio_need_iordy(drive, pio))
control |= 2; /* IORDY */
if (is_slave) {
master_data |= 0x4000;
Index: b/drivers/ide/siimage.c
===================================================================
--- a/drivers/ide/siimage.c
+++ b/drivers/ide/siimage.c
@@ -32,7 +32,6 @@
* smarter code in libata.
*
* TODO:
- * - IORDY fixes
* - VDMA support
*/
@@ -234,8 +233,7 @@ static u8 sil_sata_udma_filter(ide_drive
* @pio: PIO mode number
*
* Load the timing settings for this device mode into the
- * controller. If we are in PIO mode 3 or 4 turn on IORDY
- * monitoring (bit 9). The TF timing is bits 31:16
+ * controller.
*/
static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
@@ -276,13 +274,16 @@ static void sil_set_pio_mode(ide_drive_t
/* now set up IORDY */
speedp = sil_ioread16(dev, tfaddr - 2);
speedp &= ~0x200;
- if (pio > 2)
- speedp |= 0x200;
- sil_iowrite16(dev, speedp, tfaddr - 2);
mode = sil_ioread8(dev, base + addr_mask);
mode &= ~(unit ? 0x30 : 0x03);
- mode |= unit ? 0x10 : 0x01;
+
+ if (ide_pio_need_iordy(drive, pio)) {
+ speedp |= 0x200;
+ mode |= unit ? 0x10 : 0x01;
+ }
+
+ sil_iowrite16(dev, speedp, tfaddr - 2);
sil_iowrite8(dev, mode, base + addr_mask);
}
Index: b/drivers/ide/sl82c105.c
===================================================================
--- a/drivers/ide/sl82c105.c
+++ b/drivers/ide/sl82c105.c
@@ -61,8 +61,7 @@ static unsigned int get_pio_timings(ide_
if (cmd_off == 0)
cmd_off = 1;
- if ((pio > 2 || ata_id_has_iordy(drive->id)) &&
- !(pio > 4 && ata_id_is_cfa(drive->id)))
+ if (ide_pio_need_iordy(drive, pio))
iordy = 0x40;
return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
Index: b/drivers/ide/slc90e66.c
===================================================================
--- a/drivers/ide/slc90e66.c
+++ b/drivers/ide/slc90e66.c
@@ -44,7 +44,7 @@ static void slc90e66_set_pio_mode(ide_dr
control |= 1; /* Programmable timing on */
if (drive->media == ide_disk)
control |= 4; /* Prefetch, post write */
- if (pio > 2)
+ if (ide_pio_need_iordy(drive, pio))
control |= 2; /* IORDY */
if (is_slave) {
master_data |= 0x4000;
Index: b/include/linux/ide.h
===================================================================
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1524,6 +1524,7 @@ int ide_timing_compute(ide_drive_t *, u8
int ide_scan_pio_blacklist(char *);
const char *ide_xfer_verbose(u8);
u8 ide_get_best_pio_mode(ide_drive_t *, u8, u8);
+int ide_pio_need_iordy(ide_drive_t *, const u8);
int ide_set_pio_mode(ide_drive_t *, u8);
int ide_set_dma_mode(ide_drive_t *, u8);
void ide_set_pio(ide_drive_t *, u8);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
