Hi, Since from the perspective of most users of recent systems, disabling Host Protected Area (HPA) can break vendor RAID formats, GPT partitions and risks corrupting firmware or overwriting vendor system recovery tools this patchset makes the IDE subsystem preserve HPA by default. Unfortunately the original (kernels < 2.6.30) behavior (unconditionally disabling HPA and using full disk capacity) was introduced at the time when the main use of HPA was to make the drive look small enough for the BIOS to allow the system to boot with large capacity drives. Thus to allow the maximum compatibility with the existing setups (using HPA and partitioned with HPA disabled) we automatically disable HPA if any partitions overlapping HPA are detected. Additionally HPA can also be disabled using the "nohpa" module parameter (i.e. "ide_core.nohpa=0.0" to disable HPA on /dev/hda). I tested it with artificially created HPA (using 'hdparm -N p', kudos to Mark Lord for that) and it worked as expected: hda: Host Protected Area detected. current capacity is 117210000 sectors (60011 MB) native capacity is 117210240 sectors (60011 MB) hda: 117210000 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63 hda: cache flushes supported hda: hda1 hda2 hda3 hda4 < hda5 hda6 > hda: p6 size 44869482 exceeds device capacity, enabling native capacity hda: detected capacity change from 60011520000 to 60011642880 Thanks to Robert Hancock, Frans Pop and Andries E. Brouwer for input/ideas on previous (now obsoleted) HPA patches. [ Robert, it seems possible to use ->set_capacity block device method also in libata to improving HPA handling and fix previously discussed compatibility issue. ] patches: #01: warn about the partition exceeding device capacity in rescan_partions() #02: add ->set_capacity method to struct block_device_operations and use it in rescan_partitions() to enable native device capacity if any partition exceeding device capacity is detected #03: implement ->set_capacity method in ide-gd device driver to handle HPA #04: change the original kernel behavior and preserve HPA by default For easier testing the combined patch against 2.6.30-rc7 is available here: http://www.kernel.org/pub/linux/kernel/people/bart/hpa-2.6.30-rc7.patch diffstat: Documentation/ide/ide.txt | 2 + Documentation/kernel-parameters.txt | 7 +----- drivers/ide/ide-disk.c | 22 ++++++++++++++++++ drivers/ide/ide-gd.c | 14 ++++++++++++ drivers/ide/ide.c | 10 ++++++++ fs/partitions/check.c | 42 +++++++++++++++++++++++++++--------- include/linux/blkdev.h | 2 + include/linux/genhd.h | 1 include/linux/ide.h | 6 +++-- 9 files changed, 88 insertions(+), 18 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html