2009/6/3 Alan Cox <alan@xxxxxxxxxxxxxxxxxxx>: > What about 2.6.28 or 2.6.29 ? > Hi, I just installed kernel 2.6.29.4-rt16-2-rt from the SUSE build service (there's no 2.6.28 one available nor a 'normal' 2.6.29 one) and my UDMA is set correctly just as when using the default 2.6.27.21 kernel. Now I'm not sure if there really is a problem in 2.6.30-rc7-git4 or did I somehow introduced it by configuring something incorrectly (which I doubt because as I said, I didn't touch anything related to IDE during configuration. I only tweaked a few options, most of them in the General and Processor sections). However, this 2.6.29.4-rt16-2-rt kernel seems to have a bug (not sure if it's present in mainline too or because of the patches Novell used to build this rt kernel) in rtmutex as I get things such as... BUG: sleeping function called from invalid context at /usr/src/packages/BUILD/kernel-rt-2.6.29.4/linux-2.6.29/kernel/rtmutex.c:685 in_atomic(): 1, irqs_disabled(): 1, pid: 17, name: work_on_cpu/0 Pid: 17, comm: work_on_cpu/0 Not tainted 2.6.29.4-rt16-2-rt #1 Call Trace: [<ffffffff80227b4a>] dump_trace+0xda/0x3d0 [<ffffffff802288ff>] show_trace_log_lvl+0x4c/0x58 [<ffffffff8022891b>] show_trace+0x10/0x12 [<ffffffff804ee605>] dump_stack+0x72/0x7b [<ffffffff80252635>] __might_sleep+0x10a/0x10c [<ffffffff804f0af7>] rt_spin_lock+0x2f/0x78 [<ffffffff802ee5b1>] _slab_irq_disable+0x40/0x63 [<ffffffff802f0495>] kmem_cache_alloc_node+0x3a/0x21b [<ffffffff802a9621>] irq_to_desc_alloc_cpu+0xb7/0x20e [<ffffffff8023d47a>] io_apic_set_pci_routing+0x63/0xbe [<ffffffff80238555>] mp_register_gsi+0xc1/0xcc [<ffffffff802385cc>] acpi_register_gsi+0x3f/0x4b [<ffffffff803fb41b>] acpi_pci_irq_enable+0x145/0x233 [<ffffffff8045c4bb>] pcibios_enable_device+0x29/0x2e [<ffffffff803ae1b7>] do_pci_enable_device+0x28/0x40 [<ffffffff803ae224>] __pci_enable_device_flags+0x55/0x70 [<ffffffff803ae24d>] pci_enable_device+0xe/0x10 [<ffffffffa0116292>] usb_hcd_pci_probe+0x42/0x2a0 [usbcore] [<ffffffff803afc7b>] local_pci_probe+0x12/0x16 [<ffffffff80273224>] do_work_for_cpu+0x13/0x1b [<ffffffff80273429>] run_workqueue+0x110/0x1b0 [<ffffffff802735a9>] worker_thread+0xe0/0xf1 [<ffffffff80277028>] kthread+0x49/0x76 [<ffffffff80225f9a>] child_rip+0xa/0x20 ---------- dmesg IDE of 2.6.29.4-rt16-2-rt---------------- pata_via 0000:00:0f.0: PCI INT A -> Link[ALKA] -> GSI 20 (level, low) -> IRQ 20 scsi0 : pata_via scsi1 : pata_via ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xdc00 irq 14 ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xdc08 irq 15 ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133 ata1.00: 160086528 sectors, multi 16: LBA ata1.01: ATA-5: ST340016A, 3.10, max UDMA/100 ata1.01: 78165360 sectors, multi 16: LBA ata1.00: configured for UDMA/133 ata1.01: configured for UDMA/100 isa bounce pool size: 16 pages scsi 0:0:0:0: Direct-Access ATA Maxtor 6Y080L0 YAR4 PQ: 0 ANSI: 5 scsi 0:0:1:0: Direct-Access ATA ST340016A 3.10 PQ: 0 ANSI: 5 ata2.00: ATAPI: TSSTcorpCD/DVDW TS-H552U, US08, max UDMA/33 ata2.00: configured for UDMA/33 scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW TS-H552U US08 PQ: 0 ANSI: 5 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found udevd version 128 started Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 160086528 512-byte hardware sectors: (81.9 GB/76.3 GiB) -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
