Add missing printk() logging facility in sl82c105_dma_lost_irq().
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
---
The patch is atop of the ide-2.6.git 'for-next' branch...
drivers/ide/sl82c105.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
Index: ide-2.6/drivers/ide/sl82c105.c
===================================================================
--- ide-2.6.orig/drivers/ide/sl82c105.c
+++ ide-2.6/drivers/ide/sl82c105.c
@@ -10,7 +10,7 @@
* with the timing registers setup.
* -- Benjamin Herrenschmidt (01/11/03) benh@xxxxxxxxxxxxxxxxxxx
*
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@xxxxxxxxxx>
+ * Copyright (C) 2006-2007,2009 MontaVista Software, Inc. <source@xxxxxxxxxx>
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*/
@@ -146,14 +146,15 @@ static void sl82c105_dma_lost_irq(ide_dr
u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
u8 dma_cmd;
- printk("sl82c105: lost IRQ, resetting host\n");
+ printk(KERN_WARNING "sl82c105: lost IRQ, resetting host\n");
/*
* Check the raw interrupt from the drive.
*/
pci_read_config_dword(dev, 0x40, &val);
if (val & mask)
- printk("sl82c105: drive was requesting IRQ, but host lost it\n");
+ printk(KERN_INFO "sl82c105: drive was requesting IRQ, "
+ "but host lost it\n");
/*
* Was DMA enabled? If so, disable it - we're resetting the
@@ -162,7 +163,7 @@ static void sl82c105_dma_lost_irq(ide_dr
dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
if (dma_cmd & 1) {
outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- printk("sl82c105: DMA was enabled\n");
+ printk(KERN_INFO "sl82c105: DMA was enabled\n");
}
sl82c105_reset_host(dev);
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
