I see the following command queue errors with kernel 2.6.27 and 2.6.31.
My setup has RocketRaid SATA controller and a few HDDs connected. The disks
are mapped to iSCSI initiator. When the initiator does Reads on the LUNs, I
get the following errors. I have tried various HDDs/contollers but no luck
;-( The same works well is 2.6.21.
Any ideas....Thanks!
ata1: mv_process_crpb_response: no qc for tag=10
ata1.00: qc timeout (cmd 0x2f)
ata1: failed to read log page 10h (errno=-5)
ata1.00: exception Emask 0x1 SAct 0xffff SErr 0x0 action 0x6 frozen
ata1.00: edma_err_cause=02000084 pp_flags=00000003, dev error, EDMA
self-disable
ata1.00: cmd 60/80:00:80:4f:00/00:00:00:00:00/40 tag 0 ncq 65536 in
res 41/54:00:00:58:00/54:04:00:00:00/40 Emask 0x89 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC IDNF ABRT }
ata1.00: cmd 60/80:08:00:52:00/00:00:00:00:00/40 tag 1 ncq 65536 in
res 41/54:00:00:58:00/54:04:00:00:00/40 Emask 0x89 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC IDNF ABRT }
ata1.00: cmd 60/80:10:00:47:00/00:00:00:00:00/40 tag 2 ncq 65536 in
res 41/54:00:00:58:00/54:04:00:00:00/40 Emask 0x89 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC IDNF ABRT }
ata1.00: cmd 60/80:18:80:54:00/00:00:00:00:00/40 tag 3 ncq 65536 in
res 41/54:00:00:58:00/54:04:00:00:00/40 Emask 0x89 (media error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { UNC IDNF ABRT }
ata1.00: cmd 60/00:20:00:58:00/04:00:00:00:00/40 tag 4 ncq 524288 in
res 41/54:00:00:58:00/54:04:00:00:00/40 Emask 0x89 (media error)
ata1.00: status: { DRDY ERR }
--
View this message in context: http://www.nabble.com/command-queue-errors-with-2.6.27-tp24580999p24580999.html
Sent from the linux-ide mailing list archive at Nabble.com.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
