Tejun Heo napsal(a): > Zdenek Kaspar wrote: >> Tejun Heo napsal(a): >>> Zdenek Kaspar wrote: >>>> Hello Tejun, thanks for your reply. Attaching logs from my testing machine.. >>>> >>>> I see this behavior on ICH7R with i3000 chipset too: >>>> 00:1f.2 RAID bus controller [0104]: Intel Corporation 82801GR/GH (ICH7 >>>> Family) SATA RAID Controller [8086:27c3] (rev 01) >>> Can you please apply the attached patch and report the resulting boot >>> log? Thanks. > > Can you please try the attached patch? > > Thanks. Now it's fine. Thanks & attaching dmesg..
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.31-rc3 (root@merkur) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Thu Jul 16 14:59:08 CEST 2009 [ 0.000000] Command line: root=/dev/mapper/sda2_crypt ro [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable) [ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007f547000 (usable) [ 0.000000] BIOS-e820: 000000007f547000 - 000000007f553000 (reserved) [ 0.000000] BIOS-e820: 000000007f553000 - 000000007f637000 (usable) [ 0.000000] BIOS-e820: 000000007f637000 - 000000007f6e8000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000007f6e8000 - 000000007f6eb000 (usable) [ 0.000000] BIOS-e820: 000000007f6eb000 - 000000007f6f0000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6f0000 - 000000007f6f1000 (usable) [ 0.000000] BIOS-e820: 000000007f6f1000 - 000000007f6ff000 (ACPI data) [ 0.000000] BIOS-e820: 000000007f6ff000 - 000000007f700000 (usable) [ 0.000000] BIOS-e820: 000000007f700000 - 0000000080000000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI 2.4 present. [ 0.000000] last_pfn = 0x7f700 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-FFFFF uncachable [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 07F800000 mask FFF800000 uncachable [ 0.000000] 2 base 07F700000 mask FFFF00000 uncachable [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-000000007f700000 [ 0.000000] 0000000000 - 007f600000 page 2M [ 0.000000] 007f600000 - 007f700000 page 4k [ 0.000000] kernel direct mapping tables up to 7f700000 @ 8000-c000 [ 0.000000] RAMDISK: 37854000 - 37fef79e [ 0.000000] ACPI: RSDP 00000000000fe020 00014 (v00 INTEL ) [ 0.000000] ACPI: RSDT 000000007f6fd038 00050 (v01 INTEL ECG3510M 00000073 01000013) [ 0.000000] ACPI: FACP 000000007f6fc000 00074 (v01 INTEL ECG3510M 00000073 MSFT 01000013) [ 0.000000] ACPI: DSDT 000000007f6f6000 05BEB (v01 INTEL ECG3510M 00000073 MSFT 01000013) [ 0.000000] ACPI: FACS 000000007f693000 00040 [ 0.000000] ACPI: APIC 000000007f6f5000 00078 (v01 INTEL ECG3510M 00000073 MSFT 01000013) [ 0.000000] ACPI: WDDT 000000007f6f4000 00040 (v01 INTEL ECG3510M 00000073 MSFT 01000013) [ 0.000000] ACPI: MCFG 000000007f6f3000 0003C (v01 INTEL ECG3510M 00000073 MSFT 01000013) [ 0.000000] ACPI: ASF! 000000007f6f2000 000A6 (v32 INTEL ECG3510M 00000073 MSFT 01000013) [ 0.000000] ACPI: HPET 000000007f6f1000 00038 (v01 INTEL ECG3510M 00000073 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007f6ef000 0020C (v01 INTEL CpuPm 00000073 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007f6ee000 00175 (v01 INTEL Cpu0Ist 00000073 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007f6ed000 00175 (v01 INTEL Cpu1Ist 00000073 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007f6ec000 00175 (v01 INTEL Cpu2Ist 00000073 MSFT 01000013) [ 0.000000] ACPI: SSDT 000000007f6eb000 00175 (v01 INTEL Cpu3Ist 00000073 MSFT 01000013) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007f700000 [ 0.000000] Bootmem setup node 0 0000000000000000-000000007f700000 [ 0.000000] NODE_DATA [0000000000001000 - 0000000000004fff] [ 0.000000] bootmap [000000000000a000 - 0000000000019edf] pages 10 [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 007f700000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] [ 0.000000] #2 [0001000000 - 000152280c] TEXT DATA BSS ==> [0001000000 - 000152280c] [ 0.000000] #3 [0037854000 - 0037fef79e] RAMDISK ==> [0037854000 - 0037fef79e] [ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000] [ 0.000000] #5 [0001523000 - 000152314d] BRK ==> [0001523000 - 000152314d] [ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000] [ 0.000000] found SMP MP-table at [ffff8800000fe200] fe200 [ 0.000000] [ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001a00000-ffff8800035fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00100000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[6] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x0000008f [ 0.000000] 0: 0x00000100 -> 0x0007f547 [ 0.000000] 0: 0x0007f553 -> 0x0007f637 [ 0.000000] 0: 0x0007f6e8 -> 0x0007f6eb [ 0.000000] 0: 0x0007f6f0 -> 0x0007f6f1 [ 0.000000] 0: 0x0007f6ff -> 0x0007f700 [ 0.000000] On node 0 totalpages: 521663 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 103 pages reserved [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7081 pages used for memmap [ 0.000000] DMA32 zone: 510599 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] PM: Registered nosave memory: 000000000008f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 000000007f547000 - 000000007f553000 [ 0.000000] PM: Registered nosave memory: 000000007f637000 - 000000007f6e8000 [ 0.000000] PM: Registered nosave memory: 000000007f6eb000 - 000000007f6f0000 [ 0.000000] PM: Registered nosave memory: 000000007f6f1000 - 000000007f6ff000 [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ff00000) [ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 25 pages at ffff880001534000, static data 72864 bytes [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 514423 [ 0.000000] Policy zone: DMA32 [ 0.000000] Kernel command line: root=/dev/mapper/sda2_crypt ro [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Initializing CPU#0 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 2044360k/2087936k available (2790k kernel code, 1284k absent, 42292k reserved, 1375k data, 512k init) [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:440 [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2387.987 MHz processor. [ 0.002333] Console: colour VGA+ 80x25 [ 0.002335] console [tty0] enabled [ 0.007354] hpet clockevent registered [ 0.007356] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.007408] Calibrating delay loop (skipped), value calculated using timer frequency.. 4775.97 BogoMIPS (lpj=23879870) [ 0.007533] Security Framework initialized [ 0.007578] SELinux: Disabled at boot. [ 0.007778] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.008927] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.009468] Mount-cache hash table entries: 256 [ 0.009636] Initializing cgroup subsys ns [ 0.009682] Initializing cgroup subsys cpuacct [ 0.009726] Initializing cgroup subsys devices [ 0.009769] Initializing cgroup subsys freezer [ 0.009812] Initializing cgroup subsys net_cls [ 0.009873] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.009934] CPU: L2 cache: 4096K [ 0.009976] CPU 0/0x0 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 0 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU0: Thermal monitoring enabled (TM2) [ 0.010000] using mwait in idle threads. [ 0.010000] ACPI: Core revision 20090521 [ 0.011461] Setting APIC routing to flat [ 0.011804] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.114031] CPU0: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 0.120000] Booting processor 1 APIC 0x1 ip 0x6000 [ 0.010000] Initializing CPU#1 [ 0.010000] Calibrating delay using timer specific routine.. 4776.01 BogoMIPS (lpj=23880088) [ 0.010000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.010000] CPU: L2 cache: 4096K [ 0.010000] CPU 1/0x1 -> Node 0 [ 0.010000] CPU: Physical Processor ID: 0 [ 0.010000] CPU: Processor Core ID: 1 [ 0.010000] mce: CPU supports 6 MCE banks [ 0.010000] CPU1: Thermal monitoring enabled (TM2) [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 [ 0.271221] CPU1: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06 [ 0.271740] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.280019] Brought up 2 CPUs [ 0.280060] Total of 2 processors activated (9551.99 BogoMIPS). [ 0.280183] regulator: core version 0.5 [ 0.280183] NET: Registered protocol family 16 [ 0.280183] ACPI: bus type pci registered [ 0.280183] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.280183] PCI: Not using MMCONFIG. [ 0.280183] PCI: Using configuration type 1 for base access [ 0.280184] bio: create slab <bio-0> at 0 [ 0.280440] ACPI: EC: Look up EC in DSDT [ 0.283365] ACPI: Interpreter enabled [ 0.283408] ACPI: (supports S0 S1 S3 S4 S5) [ 0.283555] ACPI: Using IOAPIC for interrupt routing [ 0.283632] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 127 [ 0.284326] PCI: MCFG area at f0000000 reserved in ACPI motherboard resources [ 0.292821] PCI: Using MMCONFIG at f0000000 - f7ffffff [ 0.292874] ACPI: No dock devices found. [ 0.292874] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.292874] pci 0000:00:02.0: reg 10 32bit mmio: [0x90100000-0x901fffff] [ 0.292874] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff] [ 0.292874] pci 0000:00:02.0: reg 20 io port: [0x2410-0x2417] [ 0.292874] pci 0000:00:02.1: reg 10 32bit mmio: [0x90000000-0x900fffff] [ 0.292874] pci 0000:00:19.0: reg 10 32bit mmio: [0x90200000-0x9021ffff] [ 0.292874] pci 0000:00:19.0: reg 14 32bit mmio: [0x90220000-0x90220fff] [ 0.292874] pci 0000:00:19.0: reg 18 io port: [0x20e0-0x20ff] [ 0.292874] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold [ 0.292874] pci 0000:00:19.0: PME# disabled [ 0.292874] pci 0000:00:1a.0: reg 20 io port: [0x20c0-0x20df] [ 0.292874] pci 0000:00:1a.1: reg 20 io port: [0x20a0-0x20bf] [ 0.292874] pci 0000:00:1a.7: reg 10 32bit mmio: [0x90221c00-0x90221fff] [ 0.292874] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 0.292874] pci 0000:00:1a.7: PME# disabled [ 0.292874] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.292874] pci 0000:00:1c.0: PME# disabled [ 0.292874] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.292874] pci 0000:00:1c.1: PME# disabled [ 0.292874] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.292874] pci 0000:00:1c.2: PME# disabled [ 0.292874] pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f] [ 0.292874] pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f] [ 0.292874] pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f] [ 0.292874] pci 0000:00:1d.7: reg 10 32bit mmio: [0x90221800-0x90221bff] [ 0.292874] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 0.292874] pci 0000:00:1d.7: PME# disabled [ 0.292874] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.300003] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.300052] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f) [ 0.300167] pci 0000:00:1f.2: reg 10 io port: [0x2408-0x240f] [ 0.300172] pci 0000:00:1f.2: reg 14 io port: [0x241c-0x241f] [ 0.300176] pci 0000:00:1f.2: reg 18 io port: [0x2400-0x2407] [ 0.300181] pci 0000:00:1f.2: reg 1c io port: [0x2418-0x241b] [ 0.300186] pci 0000:00:1f.2: reg 20 io port: [0x2020-0x203f] [ 0.300191] pci 0000:00:1f.2: reg 24 32bit mmio: [0x90221000-0x902217ff] [ 0.300214] pci 0000:00:1f.2: PME# supported from D3hot [ 0.300260] pci 0000:00:1f.2: PME# disabled [ 0.300321] pci 0000:00:1f.3: reg 10 32bit mmio: [0x90222000-0x902220ff] [ 0.300335] pci 0000:00:1f.3: reg 20 io port: [0x2000-0x201f] [ 0.300481] pci 0000:03:00.0: reg 10 io port: [0x1018-0x101f] [ 0.300489] pci 0000:03:00.0: reg 14 io port: [0x1024-0x1027] [ 0.300497] pci 0000:03:00.0: reg 18 io port: [0x1010-0x1017] [ 0.300505] pci 0000:03:00.0: reg 1c io port: [0x1020-0x1023] [ 0.300514] pci 0000:03:00.0: reg 20 io port: [0x1000-0x100f] [ 0.300529] pci 0000:03:00.0: reg 30 32bit mmio: [0xffff0000-0xffffffff] [ 0.300607] pci 0000:00:1c.2: bridge io port: [0x1000-0x1fff] [ 0.300655] pci 0000:00:1e.0: transparent bridge [ 0.300720] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.300930] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT] [ 0.301013] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] [ 0.301073] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT] [ 0.301132] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT] [ 0.301428] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12) [ 0.301428] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.301428] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12) [ 0.301428] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12) [ 0.301428] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11 12) [ 0.301682] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12) [ 0.301993] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11 12) *0, disabled. [ 0.302355] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11 12) [ 0.302619] usbcore: registered new interface driver usbfs [ 0.302619] usbcore: registered new interface driver hub [ 0.302619] usbcore: registered new device driver usb [ 0.310017] PCI: Using ACPI for IRQ routing [ 0.330032] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.330159] hpet0: 3 comparators, 64-bit 14.318180 MHz counter [ 0.360045] pnp: PnP ACPI init [ 0.360100] ACPI: bus type pnp registered [ 0.362584] pnp: PnP ACPI: found 11 devices [ 0.362627] ACPI: ACPI bus type pnp unregistered [ 0.362676] system 00:01: iomem range 0xf0000000-0xf7ffffff has been reserved [ 0.362726] system 00:01: iomem range 0xfed13000-0xfed13fff has been reserved [ 0.362775] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved [ 0.362824] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved [ 0.362874] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved [ 0.362923] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 0.362972] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved [ 0.363022] system 00:01: iomem range 0xfed45000-0xfed99fff has been reserved [ 0.363071] system 00:01: iomem range 0xc0000-0xdffff has been reserved [ 0.363119] system 00:01: iomem range 0xe0000-0xfffff could not be reserved [ 0.363172] system 00:06: ioport range 0x500-0x53f has been reserved [ 0.363219] system 00:06: ioport range 0x400-0x47f has been reserved [ 0.363267] system 00:06: ioport range 0x360-0x361 has been reserved [ 0.363315] system 00:06: ioport range 0x680-0x6ff has been reserved [ 0.368306] pci 0000:03:00.0: BAR 6: no parent found for of device [0xffff0000-0xffffffff] [ 0.368399] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01 [ 0.368445] pci 0000:00:1c.0: IO window: disabled [ 0.368491] pci 0000:00:1c.0: MEM window: disabled [ 0.368536] pci 0000:00:1c.0: PREFETCH window: disabled [ 0.368582] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02 [ 0.368628] pci 0000:00:1c.1: IO window: disabled [ 0.368674] pci 0000:00:1c.1: MEM window: disabled [ 0.368719] pci 0000:00:1c.1: PREFETCH window: disabled [ 0.368766] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03 [ 0.368813] pci 0000:00:1c.2: IO window: 0x1000-0x1fff [ 0.368860] pci 0000:00:1c.2: MEM window: disabled [ 0.368905] pci 0000:00:1c.2: PREFETCH window: 0x90300000-0x903fffff [ 0.368954] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:04 [ 0.369000] pci 0000:00:1e.0: IO window: disabled [ 0.369046] pci 0000:00:1e.0: MEM window: disabled [ 0.369091] pci 0000:00:1e.0: PREFETCH window: disabled [ 0.369143] alloc irq_desc for 17 on node 0 [ 0.369145] alloc kstat_irqs on node 0 [ 0.369149] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 0.369198] pci 0000:00:1c.0: setting latency timer to 64 [ 0.369204] alloc irq_desc for 16 on node 0 [ 0.369205] alloc kstat_irqs on node 0 [ 0.369208] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 0.369257] pci 0000:00:1c.1: setting latency timer to 64 [ 0.369263] alloc irq_desc for 18 on node 0 [ 0.369264] alloc kstat_irqs on node 0 [ 0.369267] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.369316] pci 0000:00:1c.2: setting latency timer to 64 [ 0.369321] pci 0000:00:1e.0: setting latency timer to 64 [ 0.369324] pci_bus 0000:00: resource 0 io: [0x00-0xffff] [ 0.369326] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] [ 0.369329] pci_bus 0000:03: resource 0 io: [0x1000-0x1fff] [ 0.369331] pci_bus 0000:03: resource 2 pref mem [0x90300000-0x903fffff] [ 0.369333] pci_bus 0000:04: resource 3 io: [0x00-0xffff] [ 0.369335] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff] [ 0.369376] NET: Registered protocol family 2 [ 0.369527] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.370190] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.371755] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.372329] TCP: Hash tables configured (established 262144 bind 65536) [ 0.372377] TCP reno registered [ 0.372541] NET: Registered protocol family 1 [ 0.372638] Trying to unpack rootfs image as initramfs... [ 0.501876] Switched to high resolution mode on CPU 1 [ 0.510055] Switched to high resolution mode on CPU 0 [ 0.555978] Freeing initrd memory: 7789k freed [ 0.559653] audit: initializing netlink socket (disabled) [ 0.559720] type=2000 audit(1247757645.551:1): initialized [ 0.559988] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.560174] VFS: Disk quotas dquot_6.5.2 [ 0.560241] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.560336] msgmni has been set to 4008 [ 0.560514] alg: No test for stdrng (krng) [ 0.560603] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.560668] io scheduler noop registered [ 0.560710] io scheduler anticipatory registered [ 0.560753] io scheduler deadline registered (default) [ 0.560807] io scheduler cfq registered [ 0.560860] pci 0000:00:02.0: Boot video device [ 0.561300] alloc irq_desc for 24 on node 0 [ 0.561302] alloc kstat_irqs on node 0 [ 0.561311] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X [ 0.561318] pcieport-driver 0000:00:1c.0: setting latency timer to 64 [ 0.561502] alloc irq_desc for 25 on node 0 [ 0.561503] alloc kstat_irqs on node 0 [ 0.561509] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X [ 0.561516] pcieport-driver 0000:00:1c.1: setting latency timer to 64 [ 0.561695] alloc irq_desc for 26 on node 0 [ 0.561696] alloc kstat_irqs on node 0 [ 0.561702] pcieport-driver 0000:00:1c.2: irq 26 for MSI/MSI-X [ 0.561708] pcieport-driver 0000:00:1c.2: setting latency timer to 64 [ 0.564657] Linux agpgart interface v0.103 [ 0.564702] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.564860] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.565077] Platform driver 'serial8250' needs updating - please use dev_pm_ops [ 0.565378] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.567027] brd: module loaded [ 0.567129] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 0.567361] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 0.567408] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 0.567486] Platform driver 'i8042' needs updating - please use dev_pm_ops [ 0.568047] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.568217] mice: PS/2 mouse device common for all mice [ 0.568310] rtc_cmos 00:03: RTC can wake from S4 [ 0.568400] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.568466] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 0.568541] cpuidle: using governor ladder [ 0.568584] cpuidle: using governor menu [ 0.568628] No iBFT detected. [ 0.568914] TCP cubic registered [ 0.568986] NET: Registered protocol family 10 [ 0.569388] lo: Disabled Privacy Extensions [ 0.569645] Mobile IPv6 [ 0.569685] NET: Registered protocol family 17 [ 0.569850] registered taskstats version 1 [ 0.570037] rtc_cmos 00:03: setting system clock to 2009-07-16 15:20:46 UTC (1247757646) [ 0.570155] Freeing unused kernel memory: 512k freed [ 0.594472] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 [ 0.680674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 0.681666] uhci_hcd: USB Universal Host Controller Interface driver [ 0.691294] e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2 [ 0.691352] e1000e: Copyright (c) 1999-2008 Intel Corporation. [ 0.697480] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 0.697555] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 0.697558] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 0.697664] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 0.701660] ehci_hcd 0000:00:1a.7: debug port 1 [ 0.701708] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported [ 0.701725] ehci_hcd 0000:00:1a.7: irq 18, io mem 0x90221c00 [ 0.730043] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 0.730117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 0.730165] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.730229] usb usb1: Product: EHCI Host Controller [ 0.730273] usb usb1: Manufacturer: Linux 2.6.31-rc3 ehci_hcd [ 0.730318] usb usb1: SerialNumber: 0000:00:1a.7 [ 0.730417] usb usb1: configuration #1 chosen from 1 choice [ 0.730489] hub 1-0:1.0: USB hub found [ 0.730535] hub 1-0:1.0: 4 ports detected [ 0.730666] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.730727] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 0.730731] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 0.730813] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2 [ 0.730915] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000020c0 [ 0.730994] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 0.731044] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.731112] usb usb2: Product: UHCI Host Controller [ 0.731158] usb usb2: Manufacturer: Linux 2.6.31-rc3 uhci_hcd [ 0.731206] usb usb2: SerialNumber: 0000:00:1a.0 [ 0.731293] usb usb2: configuration #1 chosen from 1 choice [ 0.731367] hub 2-0:1.0: USB hub found [ 0.731421] hub 2-0:1.0: 2 ports detected [ 0.731549] alloc irq_desc for 20 on node 0 [ 0.731551] alloc kstat_irqs on node 0 [ 0.731557] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 0.731610] e1000e 0000:00:19.0: setting latency timer to 64 [ 0.731676] alloc irq_desc for 27 on node 0 [ 0.731677] alloc kstat_irqs on node 0 [ 0.731685] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 0.746539] SCSI subsystem initialized [ 0.804628] libata version 3.00 loaded. [ 0.831392] pata_jmicron 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.831485] pata_jmicron 0000:03:00.0: setting latency timer to 64 [ 0.831522] scsi0 : pata_jmicron [ 0.831633] scsi1 : pata_jmicron [ 0.832190] ata1: PATA max UDMA/100 cmd 0x1018 ctl 0x1024 bmdma 0x1000 irq 18 [ 0.832239] ata2: PATA max UDMA/100 cmd 0x1010 ctl 0x1020 bmdma 0x1008 irq 18 [ 1.003677] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1c:c0:5a:d8:ba [ 1.003745] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection [ 1.003813] 0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff [ 1.003935] alloc irq_desc for 23 on node 0 [ 1.003937] alloc kstat_irqs on node 0 [ 1.003943] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.004009] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.004012] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.004107] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 1.008060] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.008106] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported [ 1.008119] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x90221800 [ 1.040047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.040120] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.040172] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.040241] usb usb3: Product: EHCI Host Controller [ 1.040299] usb usb3: Manufacturer: Linux 2.6.31-rc3 ehci_hcd [ 1.040344] usb usb3: SerialNumber: 0000:00:1d.7 [ 1.040427] usb usb3: configuration #1 chosen from 1 choice [ 1.042287] hub 3-0:1.0: USB hub found [ 1.042332] hub 3-0:1.0: 6 ports detected [ 1.043051] alloc irq_desc for 21 on node 0 [ 1.043053] alloc kstat_irqs on node 0 [ 1.043057] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.043111] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.043114] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.043190] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.043281] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000020a0 [ 1.043353] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.043402] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.043466] usb usb4: Product: UHCI Host Controller [ 1.043510] usb usb4: Manufacturer: Linux 2.6.31-rc3 uhci_hcd [ 1.043555] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.043633] usb usb4: configuration #1 chosen from 1 choice [ 1.043699] hub 4-0:1.0: USB hub found [ 1.043745] hub 4-0:1.0: 2 ports detected [ 1.044464] ahci 0000:00:1f.2: version 3.0 [ 1.044472] alloc irq_desc for 19 on node 0 [ 1.044473] alloc kstat_irqs on node 0 [ 1.044477] ahci 0000:00:1f.2: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.044544] alloc irq_desc for 28 on node 0 [ 1.044546] alloc kstat_irqs on node 0 [ 1.044552] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X [ 1.044606] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode [ 1.044673] ahci 0000:00:1f.2: flags: 64bit ncq sntf led clo pio slum part ems [ 1.044738] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.044784] ata4294967295: XXX port freeze [ 1.070056] ata4294967295: XXX port freeze [ 1.090047] ata4294967295: XXX port freeze [ 1.110046] ata4294967295: XXX port freeze [ 1.110132] scsi2 : ahci [ 1.110579] scsi3 : ahci [ 1.110978] scsi4 : ahci [ 1.111387] scsi5 : ahci [ 1.111816] scsi6 : ahci [ 1.112258] scsi7 : ahci [ 1.112404] ata3: SATA max UDMA/133 abar m2048@0x90221000 port 0x90221100 irq 28 [ 1.112470] ata4: SATA max UDMA/133 abar m2048@0x90221000 port 0x90221180 irq 28 [ 1.112534] ata5: DUMMY [ 1.112572] ata6: DUMMY [ 1.112611] ata7: SATA max UDMA/133 abar m2048@0x90221000 port 0x90221300 irq 28 [ 1.112676] ata8: SATA max UDMA/133 abar m2048@0x90221000 port 0x90221380 irq 28 [ 1.112784] ata3: XXX port freeze [ 1.112826] ata3: XXX hardresetting link, stopping engine [ 1.112871] ata3: XXX flipping SControl [ 1.113422] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.113479] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.113482] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.113570] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5 [ 1.113660] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00002080 [ 1.113734] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.113782] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.113846] usb usb5: Product: UHCI Host Controller [ 1.113890] usb usb5: Manufacturer: Linux 2.6.31-rc3 uhci_hcd [ 1.113935] usb usb5: SerialNumber: 0000:00:1d.0 [ 1.114017] usb usb5: configuration #1 chosen from 1 choice [ 1.114086] hub 5-0:1.0: USB hub found [ 1.114132] hub 5-0:1.0: 2 ports detected [ 1.115079] ata4: XXX port freeze [ 1.115089] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.115094] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.115097] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.115124] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6 [ 1.115155] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060 [ 1.115187] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.115189] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.115191] usb usb6: Product: UHCI Host Controller [ 1.115192] usb usb6: Manufacturer: Linux 2.6.31-rc3 uhci_hcd [ 1.115193] usb usb6: SerialNumber: 0000:00:1d.1 [ 1.115229] usb usb6: configuration #1 chosen from 1 choice [ 1.115251] hub 6-0:1.0: USB hub found [ 1.115256] hub 6-0:1.0: 2 ports detected [ 1.115709] ata4: XXX hardresetting link, stopping engine [ 1.115755] ata4: XXX flipping SControl [ 1.116221] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.116273] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.116275] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.116346] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7 [ 1.116430] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040 [ 1.116501] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.116549] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.116613] usb usb7: Product: UHCI Host Controller [ 1.116656] usb usb7: Manufacturer: Linux 2.6.31-rc3 uhci_hcd [ 1.116703] usb usb7: SerialNumber: 0000:00:1d.2 [ 1.116779] usb usb7: configuration #1 chosen from 1 choice [ 1.116845] hub 7-0:1.0: USB hub found [ 1.116890] hub 7-0:1.0: 2 ports detected [ 1.118292] ata7: XXX port freeze [ 1.118333] ata7: XXX hardresetting link, stopping engine [ 1.118379] ata7: XXX flipping SControl [ 1.118431] ata8: XXX port freeze [ 1.118471] ata8: XXX hardresetting link, stopping engine [ 1.118516] ata8: XXX flipping SControl [ 1.460029] ata7: XXX starting engine [ 1.460076] ata7: XXX rc=0, class=1 [ 1.460121] ata7: XXX clearing IRQs for thawing [ 1.460168] ata7: XXX port thawed [ 1.460216] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.460220] ata3: XXX irq_stat=400040 CONN|PHY [ 1.460225] ata3: XXX port freeze [ 1.460229] ata8: XXX irq_stat=400040 CONN|PHY [ 1.460232] ata8: XXX port freeze [ 1.460449] ata3: XXX starting engine [ 1.460491] ata3: XXX rc=0, class=1 [ 1.460533] ata3: XXX clearing IRQs for thawing [ 1.460576] ata3: XXX port thawed [ 1.460618] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.460669] ata8: XXX starting engine [ 1.460711] ata8: XXX rc=0, class=1 [ 1.460753] ata8: XXX clearing IRQs for thawing [ 1.460796] ata8: XXX port thawed [ 1.460838] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.460888] ata4: XXX starting engine [ 1.460930] ata4: XXX rc=0, class=0 [ 1.460972] ata4: XXX clearing IRQs for thawing [ 1.461015] ata4: XXX port thawed [ 1.461057] ata4: SATA link down (SStatus 0 SControl 300) [ 1.461464] ata3.00: ATA-8: WDC WD2502ABYS-01B7A0, 02.03B02, max UDMA/133 [ 1.461518] ata3.00: 490350672 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.462516] ata3.00: configured for UDMA/133 [ 1.462656] scsi 2:0:0:0: Direct-Access ATA WDC WD2502ABYS-0 02.0 PQ: 0 ANSI: 5 [ 1.502066] ata8.00: ATA-7: ST3400620NS, 3.AEG, max UDMA/133 [ 1.502117] ata8.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.504056] ata7.00: ATA-7: ST3400620NS, 3.AEG, max UDMA/133 [ 1.504106] ata7.00: 781422768 sectors, multi 0: LBA48 NCQ (depth 31/32) [ 1.560396] ata8.00: configured for UDMA/133 [ 1.562387] ata7.00: configured for UDMA/133 [ 1.562500] scsi 6:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5 [ 1.563770] scsi 7:0:0:0: Direct-Access ATA ST3400620NS 3.AE PQ: 0 ANSI: 5 [ 1.571589] Uniform Multi-Platform E-IDE driver [ 1.620887] sd 2:0:0:0: [sda] 490350672 512-byte logical blocks: (251 GB/233 GiB) [ 1.620907] sd 6:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 1.620938] sd 6:0:0:0: [sdb] Write Protect is off [ 1.620940] sd 6:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 1.620955] sd 6:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.621048] sdb: [ 1.621086] sd 7:0:0:0: [sdc] 781422768 512-byte logical blocks: (400 GB/372 GiB) [ 1.621115] sd 7:0:0:0: [sdc] Write Protect is off [ 1.621116] sd 7:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 1.621132] sd 7:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.621206] sdc: [ 1.621439] sd 2:0:0:0: [sda] Write Protect is off [ 1.621520] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.621536] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.621687] sda: sda1 sda2 [ 1.624517] sd 2:0:0:0: [sda] Attached SCSI disk [ 1.635338] sdb1 [ 1.635584] sd 6:0:0:0: [sdb] Attached SCSI disk [ 1.641676] sdc1 [ 1.641914] sd 7:0:0:0: [sdc] Attached SCSI disk [ 1.840047] md: raid1 personality registered for level 1 [ 1.845312] md: md0 stopped. [ 1.867200] md: bind<sdc1> [ 1.867388] md: bind<sdb1> [ 1.874205] raid1: raid set md0 active with 2 out of 2 mirrors [ 1.874431] md0: unknown partition table [ 1.938631] device-mapper: uevent: version 1.0.3 [ 1.939264] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx [ 14.034251] kjournald starting. Commit interval 5 seconds [ 14.034308] EXT3-fs: mounted filesystem with ordered data mode. [ 16.579017] udevd version 125 started [ 16.941351] agpgart-intel 0000:00:00.0: Intel G35 Chipset [ 16.942265] agpgart-intel 0000:00:00.0: detected 7676K stolen memory [ 16.945000] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000 [ 16.962856] processor LNXCPU:00: registered as cooling_device0 [ 16.962907] ACPI: Processor [CPU0] (supports 8 throttling states) [ 16.963358] processor LNXCPU:01: registered as cooling_device1 [ 16.963413] ACPI: Processor [CPU1] (supports 8 throttling states) [ 17.060546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 17.060618] ACPI: Power Button [PWRF] [ 17.060708] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3 [ 17.060779] ACPI: Sleep Button [SLPB] [ 17.260941] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05 [ 17.261057] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460) [ 17.261167] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 17.287483] Platform driver 'pcspkr' needs updating - please use dev_pm_ops [ 17.287587] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 17.298842] i801_smbus 0000:00:1f.3: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 17.394722] Platform driver 'pcspkr' needs updating - please use dev_pm_ops [ 17.394778] Error: Driver 'pcspkr' is already registered, aborting... [ 19.500446] EXT3 FS on dm-0, internal journal [ 20.297221] loop: module loaded [ 20.703146] fuse init (API version 7.12) [ 20.821576] kjournald starting. Commit interval 5 seconds [ 20.821785] EXT3 FS on sda1, internal journal [ 20.821855] EXT3-fs: mounted filesystem with ordered data mode. [ 22.110307] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 22.170083] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X [ 22.170427] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 24.801500] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX [ 24.801798] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 34.810006] eth0: no IPv6 routers present [ 186.481402] RPC: Registered udp transport module. [ 186.481457] RPC: Registered tcp transport module. [ 186.583756] Slow work thread pool: Starting up [ 186.584122] Slow work thread pool: Ready [ 186.584193] FS-Cache: Loaded [ 186.662044] FS-Cache: Netfs 'nfs' registered for caching [ 186.663999] svc: failed to register lockdv1 RPC service (errno 97).
