On Tue, 07 Jul 2009 09:23:42 +1000
Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx> wrote:
> On Mon, 2009-07-06 at 17:04 +0200, Bartlomiej Zolnierkiewicz wrote:
>
> > > Delay is fixed itself in 2.6.31-rc2. Most likely it was platform
> > > specific issue. But lost interrupt still exists. There is log of
> > > 2.6.31-rc2:
> >
> > Thanks for letting us know. When it comes to the lost interrupt
> > issue I still suspect that this is pmac specific problem (though
> > Dave may have some fresh idea about it).
>
> Hard to tell. Those things generally work... maybe something is wrong
> with that disk vs. that timing. Does it work if you move it to the
> other controller (the one to which the CD drive is connected ?)
>
> Cheers,
> Ben.
I tried this drive on ide1 and ide2, there are same issue. This drive worked
on P-III before (as separate on channel, with another hard drive and with cdrom)
and I didn't have any problem with it. There are chunks of dmesg.
On the ide1 channel:
[ 1.585394] MacIO PCI driver attached to Keylargo chipset
[ 1.587134] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 1.588076] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 1.588113] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 1.588449] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 1.588485] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 1.588838] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 1.588873] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 1.589335] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 1.589370] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 1.591439] Uniform Multi-Platform E-IDE driver
[ 1.592362] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 2.610659] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 2.610777] Probing IDE interface ide0...
[ 2.910841] hda: IBM-IC35L060AVVA07-0, ATA DISK drive
[ 3.631031] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.631208] hda: UDMA/100 mode selected
[ 3.631484] ide0 at 0xf10c2000-0xf10c2070,0xf10c2160 on irq 39
[ 4.660656] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
[ 4.660759] Probing IDE interface ide1...
[ 4.960962] hdc: QUANTUM FIREBALLP LM20.5, ATA DISK drive
[ 5.680974] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.681248] hdc: UDMA/66 mode selected
[ 5.681698] ide1 at 0xf10ba000-0xf10ba070,0xf10ba160 on irq 19
[ 6.710656] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20
[ 6.710752] Probing IDE interface ide2...
[ 7.311008] ide2 at 0xf10be000-0xf10be070,0xf10be160 on irq 20
[ 7.311361] ide-gd driver 1.18
[ 7.311548] hda: max request size: 128KiB
[ 7.340930] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63
[ 7.341321] hda: cache flushes supported
[ 7.341637] hda: [mac] hda1 hda2 hda3 hda4
[ 7.354161] hdc: max request size: 128KiB
[ 7.383460] hdc: Host Protected Area detected.
[ 7.383463] current capacity is 40130390 sectors (20546 MB)
[ 7.383467] native capacity is 40132503 sectors (20547 MB)
[ 7.383625] hdc: 40130390 sectors (20546 MB) w/1900KiB Cache, CHS=39811/16/63
[ 7.383721] hdc: cache flushes not supported
[ 7.383965] hdc:
[ 27.380690] ide-pmac lost interrupt, dma status: 8480
[ 27.380754] hdc: lost interrupt
[ 27.380795] hdc: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
[ 27.380911] hdc: possibly failed opcode: 0xc8
[ 27.385964] hdc: DMA disabled
[ 27.430645] ide1: reset: success
[ 27.475435] hdc1 hdc2 < hdc5 hdc6 hdc7 hdc8 >
[ 27.533836] ide-cd driver 5.00
On the ide2 channel:
[ 1.594873] MacIO PCI driver attached to Keylargo chipset
[ 1.596780] irq: irq 32 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 32
[ 1.597804] irq: irq 19 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 19
[ 1.597841] irq: irq 11 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 16
[ 1.598208] irq: irq 20 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 20
[ 1.598244] irq: irq 12 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 17
[ 1.598631] irq: irq 5 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 18
[ 1.598666] irq: irq 6 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 21
[ 1.599172] irq: irq 7 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 24
[ 1.599208] irq: irq 8 on host /pci@f2000000/mac-io@17/interrupt-controller@40000 mapped to virtual irq 29
[ 1.601387] Uniform Multi-Platform E-IDE driver
[ 1.602315] ide-pmac 0002:20:0d.0: enabling device (0000 -> 0002)
[ 2.630650] ide-pmac: Found Apple UniNorth ATA-6 controller (PCI), bus ID 3, irq 39
[ 2.630764] Probing IDE interface ide0...
[ 2.930832] hda: IBM-IC35L060AVVA07-0, ATA DISK drive
[ 3.651031] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 3.651211] hda: UDMA/100 mode selected
[ 3.651487] ide0 at 0xf10c2000-0xf10c2070,0xf10c2160 on irq 39
[ 4.680647] ide-pmac: Found Apple KeyLargo ATA-4 controller (macio), bus ID 2, irq 19
[ 4.680748] Probing IDE interface ide1...
[ 5.280995] ide1 at 0xf10ba000-0xf10ba070,0xf10ba160 on irq 19
[ 6.310646] ide-pmac: Found Apple KeyLargo ATA-3 controller (macio), bus ID 0, irq 20
[ 6.310740] Probing IDE interface ide2...
[ 6.610828] hde: QUANTUM FIREBALLP LM20.5, ATA DISK drive
[ 7.330944] hde: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 7.331214] hde: MWDMA2 mode selected
[ 7.331613] ide2 at 0xf10be000-0xf10be070,0xf10be160 on irq 20
[ 7.332342] ide-gd driver 1.18
[ 7.332527] hda: max request size: 128KiB
[ 7.363393] hda: 120103200 sectors (61492 MB) w/1863KiB Cache, CHS=65535/16/63
[ 7.363743] hda: cache flushes supported
[ 7.364269] hda: [mac] hda1 hda2 hda3 hda4
[ 7.370602] hde: max request size: 128KiB
[ 7.403456] hde: Host Protected Area detected.
[ 7.403460] current capacity is 40130390 sectors (20546 MB)
[ 7.403464] native capacity is 40132503 sectors (20547 MB)
[ 7.403629] hde: 40130390 sectors (20546 MB) w/1900KiB Cache, CHS=39811/16/63
[ 7.403724] hde: cache flushes not supported
[ 7.403978] hde:
[ 27.400744] ide-pmac lost interrupt, dma status: 8480
[ 27.400811] hde: lost interrupt
[ 27.400851] hde: dma_intr: status=0x58 { DriveReady SeekComplete DataRequest }
[ 27.400976] hde: possibly failed opcode: 0xc8
[ 27.403945] hde: DMA disabled
[ 27.450635] ide2: reset: success
[ 27.493588] hde1 hde2 < hde5 hde6 hde7 hde8 >
[ 27.551998] ide-cd driver 5.00
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
