Hello, This is the storage fix up for a WDC WD1600BEVT-22ZCT0 hard drive in an MSI Wind U100 Netbook. This netbook I have been using has a Power_On_Hours of 38h and Load_Cycle_Count of 6617 (174 cycle/h). And the noisy clicking sound can be heard every a few seconds. I found that Power Management Level 254 is acceptable for it. Please be noted that the "smartcrl -a" output was taken today, when I'd used it for a long time with Power Management Level 254/255 so the Load_Cycle_Count/Power_On_Hours in it doesn't reflect the status of it's default setting (Power Management Level 128). The Load_Cycle_Count/Power_On_Hours in above paragraph was recorded months ago without changing its default Power Management Level, thus very high. Thank you. Please call me if you need any more information. -- Best regards, Li, Yan Moblin Team, Opensource Technology Center, SSG, Intel Office tel.: +86-10-82171695 (inet: 8-758-1695) OpenPGP key: 5C6C31EF IRC: yanli on network irc.freenode.net
From 8bcc46eb3b1a6a2760b9a040e9e2ebd36f8b812b Mon Sep 17 00:00:00 2001 Message-Id: <8bcc46eb3b1a6a2760b9a040e9e2ebd36f8b812b.1247212168.git.yan.i.li@xxxxxxxxx> From: Yan Li <yan.i.li@xxxxxxxxx> Date: Fri, 10 Jul 2009 15:49:01 +0800 Subject: [PATCH] for MSI Wind U100 Signed-off-by: Yan Li <yan.i.li@xxxxxxxxx> --- storage-fixup.conf | 7 +++++++ 1 files changed, 7 insertions(+), 0 deletions(-) diff --git a/storage-fixup.conf b/storage-fixup.conf index e47d966..03a94e1 100644 --- a/storage-fixup.conf +++ b/storage-fixup.conf @@ -188,3 +188,10 @@ dmi system-manufacturer ASUSTeK Computer Inc. dmi system-product-name M50SV ata model WDC WD*BEVE* act hdparm -B 254 $DEV + +# Reported drive model: WDC WD1600BEVT-22ZCT0 +rule msi-wind-u100-ms-n011 +dmi system-manufacturer MICRO-STAR INTERNATIONAL CO., LTD +dmi system-product-name U-100 +ata model WDC WD*BEVT* +act hdparm -B 254 $DEV -- 1.5.6.5
# dmidecode 2.10 SMBIOS 2.4 present. 45 structures occupying 1626 bytes. Table at 0x3F607010. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: American Megatrends Inc. Version: 4.6.3 Release Date: 07/16/2008 Address: 0xF0000 Runtime Size: 64 kB ROM Size: 1024 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed ESCD support is available Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) Print screen service is supported (int 5h) 8042 keyboard services are supported (int 9h) Serial services are supported (int 14h) Printer services are supported (int 17h) CGA/mono video services are supported (int 10h) ACPI is supported LS-120 boot is supported ATAPI Zip drive boot is supported BIOS boot specification is supported Targeted content distribution is supported BIOS Revision: 4.6 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Product Name: U-100 Version: Ver.001 Serial Number: FFFFFFFF UUID: 00020003-0004-0005-0006-000700080009 Wake-up Type: Power Switch SKU Number: To be filled by O.E.M. Family: To be filled by O.E.M. Handle 0x0002, DMI type 2, 15 bytes Base Board Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Product Name: U-100 Version: Ver.001 Serial Number: FFFFFFFF Asset Tag: To be filled by O.E.M. Features: Board is a hosting board Board is replaceable Location In Chassis: To be filled by O.E.M. Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 21 bytes Chassis Information Manufacturer: MICRO-STAR INTERNATIONAL CO., LTD Type: Desktop Lock: Present Version: Ver.001 Serial Number: FFFFFFFF Asset Tag: To Be Filled By O.E.M. Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000000 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 Handle 0x0004, DMI type 4, 35 bytes Processor Information Socket Designation: CPU 1 Type: Central Processor Family: Pentium M Manufacturer: Intel ID: C2 06 01 00 FF FB E9 BF Signature: Type 0, Family 6, Model 28, Stepping 2 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) CLFSH (CLFLUSH instruction supported) DS (Debug store) ACPI (ACPI supported) MMX (MMX technology supported) FXSR (Fast floating-point save and restore) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) SS (Self-snoop) HTT (Hyper-threading technology) TM (Thermal monitor supported) PBE (Pending break enabled) Version: Intel(R) Atom(TM) CPU N270 @ 1.60GH Voltage: 3.3 V 2.9 V External Clock: 533 MHz Max Speed: 4000 MHz Current Speed: 1599 MHz Status: Populated, Enabled Upgrade: Other L1 Cache Handle: 0x0005 L2 Cache Handle: 0x0006 L3 Cache Handle: Not Provided Serial Number: To Be Filled By O.E.M. Asset Tag: To Be Filled By O.E.M. Part Number: To Be Filled By O.E.M. Handle 0x0005, DMI type 7, 19 bytes Cache Information Socket Designation: L1-Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 24 kB Maximum Size: 24 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: None System Type: Unified Associativity: Other Handle 0x0006, DMI type 7, 19 bytes Cache Information Socket Designation: L2-Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Varies With Memory Address Location: Internal Installed Size: 512 kB Maximum Size: 512 kB Supported SRAM Types: Other Installed SRAM Type: Other Speed: Unknown Error Correction Type: None System Type: Unified Associativity: 8-way Set-associative Handle 0x0007, DMI type 126, 19 bytes Inactive Handle 0x0008, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: PS2Mouse External Connector Type: PS/2 Port Type: Mouse Port Handle 0x0009, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1A1 Internal Connector Type: None External Reference Designator: Keyboard External Connector Type: PS/2 Port Type: Keyboard Port Handle 0x000A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A1 Internal Connector Type: None External Reference Designator: TV Out External Connector Type: Mini Centronics Type-14 Port Type: Other Handle 0x000B, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2A Internal Connector Type: None External Reference Designator: COM A External Connector Type: DB-9 male Port Type: Serial Port 16550A Compatible Handle 0x000C, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J2A2B Internal Connector Type: None External Reference Designator: Video External Connector Type: DB-15 female Port Type: Video Port Handle 0x000D, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB1 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000E, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB2 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x000F, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3A1 Internal Connector Type: None External Reference Designator: USB3 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0010, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J5A1 Internal Connector Type: None External Reference Designator: LAN External Connector Type: RJ-45 Port Type: Network Port Handle 0x0011, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J5A1 Internal Connector Type: None External Reference Designator: USB4 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0012, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J5A1 Internal Connector Type: None External Reference Designator: USB5 External Connector Type: Access Bus (USB) Port Type: USB Handle 0x0013, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J1E1 - ITP Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0014, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J8J2 - SATA 0 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0015, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J7H1 - SATA 1 Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0016, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3C1 - CPU FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0017, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J3C1 - CPU FAN Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0018, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J4J1 - MAIN POWER Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x0019, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J6J1 - ITP Internal Connector Type: Other External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001A, DMI type 8, 9 bytes Port Connector Information Internal Reference Designator: J7J1 - IDE Internal Connector Type: On Board IDE External Reference Designator: Not Specified External Connector Type: None Port Type: Other Handle 0x001B, DMI type 9, 13 bytes System Slot Information Designation: J6C1 Type: x16 PCI Express Current Usage: Available Length: Long ID: 0 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001C, DMI type 9, 13 bytes System Slot Information Designation: J7C1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 1 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001D, DMI type 9, 13 bytes System Slot Information Designation: J8C1 Type: x1 PCI Express Current Usage: In Use Length: Short ID: 2 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001E, DMI type 9, 13 bytes System Slot Information Designation: J8B1 Type: 32-bit PCI Current Usage: Available Length: Short ID: 3 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x001F, DMI type 9, 13 bytes System Slot Information Designation: J9B1 Type: 32-bit PCI Current Usage: Available Length: Short ID: 4 Characteristics: 3.3 V is provided Opening is shared PME signal is supported Handle 0x0020, DMI type 10, 6 bytes On Board Device Information Type: Video Status: Enabled Description: To Be Filled By O.E.M. Handle 0x0021, DMI type 10, 6 bytes On Board Device Information Type: <OUT OF SPEC> Status: Enabled Description: To Be Filled By O.E.M. Handle 0x0022, DMI type 11, 5 bytes OEM Strings String 1: To Be Filled By O.E.M. Handle 0x0023, DMI type 12, 5 bytes System Configuration Options Option 1: To Be Filled By O.E.M. Handle 0x0024, DMI type 13, 22 bytes BIOS Language Information Installable Languages: 1 en|US|iso8859-1 Currently Installed Language: en|US|iso8859-1 Handle 0x0025, DMI type 16, 15 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 2048 GB Error Information Handle: Not Provided Number Of Devices: 2 Handle 0x0026, DMI type 19, 15 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Array Handle: 0x0025 Partition Width: 0 Handle 0x0027, DMI type 17, 27 bytes Memory Device Array Handle: 0x0025 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: Unknown Form Factor: DIMM Set: Unknown Locator: DIMM0 Bank Locator: BANK0 Type: DDR2 Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer0 Serial Number: SerNum0 Asset Tag: AssetTagNum0 Part Number: PartNum0 Handle 0x0028, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0027 Memory Array Mapped Address Handle: 0x0026 Partition Row Position: 1 Handle 0x0029, DMI type 17, 27 bytes Memory Device Array Handle: 0x0025 Error Information Handle: Not Provided Total Width: Unknown Data Width: 64 bits Size: Unknown Form Factor: DIMM Set: Unknown Locator: DIMM1 Bank Locator: BANK1 Type: DDR2 Type Detail: Synchronous Speed: Unknown Manufacturer: Manufacturer1 Serial Number: SerNum1 Asset Tag: AssetTagNum1 Part Number: PartNum1 Handle 0x002A, DMI type 20, 19 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000000003FF Range Size: 1 kB Physical Device Handle: 0x0029 Memory Array Mapped Address Handle: 0x0026 Partition Row Position: 1 Handle 0x002B, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x002C, DMI type 127, 4 bytes End Of Table
/dev/sda:
ATA device, with non-removable media
Model Number: WDC WD1600BEVT-22ZCT0
Serial Number: WD-WXC808139193
Firmware Revision: 11.01A11
Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 312581808
device size with M = 1024*1024: 152627 MBytes
device size with M = 1000*1000: 160041 MBytes (160 GB)
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Advanced power management level: 128
Recommended acoustic management value: 128, current value: 128
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
* Advanced Power Management feature set
SET_MAX security extension
* Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* Segmented DOWNLOAD_MICROCODE
* SATA-I signaling speed (1.5Gb/s)
* SATA-II signaling speed (3.0Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
DMA Setup Auto-Activate optimization
Device-initiated interface power management
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
52min for SECURITY ERASE UNIT. 52min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee25774d8d6
NAA : 5
IEEE OUI : 14ee
Unique ID : 25774d8d6
Checksum: correct
smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF INFORMATION SECTION === Device Model: WDC WD1600BEVT-22ZCT0 Serial Number: WD-WXC808139193 Firmware Version: 11.01A11 User Capacity: 160,041,885,696 bytes Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: Exact ATA specification draft version not indicated Local Time is: Mon Jul 13 10:39:43 2009 CST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (5160) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 64) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x303f) SCT Status supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 3 Spin_Up_Time 0x0027 159 158 021 Pre-fail Always - 1050 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 146 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 7 Seek_Error_Rate 0x002e 100 253 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 416 10 Spin_Retry_Count 0x0033 100 100 051 Pre-fail Always - 0 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 137 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 19 193 Load_Cycle_Count 0x0032 196 196 000 Old_age Always - 12848 194 Temperature_Celsius 0x0022 100 088 000 Old_age Always - 43 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 200 Multi_Zone_Error_Rate 0x0009 100 253 051 Pre-fail Offline - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
Attachment:
signature.asc
Description: Digital signature
