(cc linux-ide) null-pointer deref in ide_complete_rq(). On Sun, 6 Sep 2009 17:17:08 -0300 Stevan Silva <tevost@xxxxxxxxx> wrote: > I recently bought an ASUS M4N78 PRO motherboard, that is based in the > nvidia's geforce 8300 chipset and updated my system kernel to 2.6.30 > version. > Everything was OK untill I replace and old LG DVD-ROM IDE drive > working as SLAVE to a newer GSA-4166B DVD-RW; same ide cable, same > slave ide mode. > After that, system started to crash with a > Kernel panic - not syncing: Fatal exception in interrupt > Pid: 0, comm: swapper Tainted: G D 2.6.30 #2 > > Also, the system is booting up normally with an older kernel 2.6.24, > windows XP and Windows 7. > DVD drive works normally under these systems. > What I found is that on .24 dmesg's, the IDE controller are detected > as NFORCE-MCP77: IDE controller, but in the .30 its shown as amd74xx. > Follows below the full kernel message in debug level. > Also, the pci devices listing. > As this is my first post to linux kernel mail list, I am sorry if I am > disrespecting any well conduction rule. > If it's possible, I would like to follow the discussion about this > topic over CCs to this email. > If there are some additional information that could help, please contact me. > > Best regards, > > Stevan Silva. > > Linux version 2.6.30 (root@darkstar) (gcc version 4.2.3) #2 SMP Tue > Aug 11 00:20:28 BRT 2009 > KERNEL supported cpus: > Intel GenuineIntel > AMD AuthenticAMD > NSC Geode by NSC > Cyrix CyrixInstead > Centaur CentaurHauls > Transmeta GenuineTMx86 > Transmeta TransmetaCPU > UMC UMC UMC UMC > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009f000 (usable) > BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000006ff90000 (usable) > BIOS-e820: 000000006ff90000 - 000000006ffa8000 (ACPI data) > BIOS-e820: 000000006ffa8000 - 000000006ffe0000 (ACPI NVS) > BIOS-e820: 000000006ffe0000 - 0000000070000000 (reserved) > BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) > BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) > BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) > DMI present. > AMI BIOS detected: BIOS may corrupt low RAM, working around it. > e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) > last_pfn = 0x6ff90 max_arch_pfn = 0x100000 > MTRR default type: uncachable > MTRR fixed ranges enabled: > 00000-9FFFF write-back > A0000-EFFFF uncachable > F0000-FFFFF write-protect > MTRR variable ranges enabled: > 0 base 0000000000 mask FFC0000000 write-back > 1 base 0040000000 mask FFE0000000 write-back > 2 base 0060000000 mask FFF0000000 write-back > 3 disabled > 4 disabled > 5 disabled > 6 disabled > 7 disabled > init_memory_mapping: 0000000000000000-00000000377fe000 > 0000000000 - 0000400000 page 4k > 0000400000 - 0037400000 page 2M > 0037400000 - 00377fe000 page 4k > kernel direct mapping tables up to 377fe000 @ 10000-15000 > ACPI: RSDP 000fbbb0 00024 (v02 ACPIAM) > ACPI: XSDT 6ff90100 00064 (v01 071009 XSDT1726 20090710 MSFT 00000097) > ACPI: FACP 6ff90290 000F4 (v03 071009 FACP1726 20090710 MSFT 00000097) > ACPI: DSDT 6ff90450 0BF1B (v01 A1191 A1191001 00000001 INTL 20060113) > ACPI: FACS 6ffa8000 00040 > ACPI: APIC 6ff90390 00080 (v01 071009 APIC1726 20090710 MSFT 00000097) > ACPI: MCFG 6ff90410 0003C (v01 071009 OEMMCFG 20090710 MSFT 00000097) > ACPI: OEMB 6ffa8040 00073 (v01 071009 OEMB1726 20090710 MSFT 00000097) > ACPI: HPET 6ff9c370 00038 (v01 071009 OEMHPET0 20090710 MSFT 00000097) > ACPI: INFO 6ffa80c0 00124 (v01 071009 AMDINFO 20090710 MSFT 00000097) > ACPI: NVHD 6ffa81f0 00284 (v01 071009 NVHDCP 20090710 MSFT 00000097) > ACPI: SSDT 6ff9c3b0 0028A (v01 A M I POWERNOW 00000001 AMD 00000001) > ACPI: Local APIC address 0xfee00000 > 903MB HIGHMEM available. > 887MB LOWMEM available. > mapped low ram: 0 - 377fe000 > low ram: 0 - 377fe000 > node 0 low ram: 00000000 - 377fe000 > node 0 bootmap 00011000 - 00017f00 > (8 early reservations) ==> bootmem [0000000000 - 00377fe000] > #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] > #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] > #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] > #3 [0000100000 - 00005b4e44] TEXT DATA BSS ==> [0000100000 - 00005b4e44] > #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] > #5 [00005b5000 - 00005b722c] BRK ==> [00005b5000 - 00005b722c] > #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000] > #7 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000] > found SMP MP-table at [c00ff780] ff780 > Zone PFN ranges: > DMA 0x00000010 -> 0x00001000 > Normal 0x00001000 -> 0x000377fe > HighMem 0x000377fe -> 0x0006ff90 > Movable zone start PFN for each node > early_node_map[2] active PFN ranges > 0: 0x00000010 -> 0x0000009f > 0: 0x00000100 -> 0x0006ff90 > On node 0 totalpages: 458527 > free_area_init_node: node 0, pgdat c050d2c0, node_mem_map c1000200 > DMA zone: 32 pages used for memmap > DMA zone: 0 pages reserved > DMA zone: 3951 pages, LIFO batch:0 > Normal zone: 1744 pages used for memmap > Normal zone: 221486 pages, LIFO batch:31 > HighMem zone: 1808 pages used for memmap > HighMem zone: 229506 pages, LIFO batch:31 > Using APIC driver default > Detected use of extended apic ids on hypertransport bus > ACPI: PM-Timer IO Port: 0x2008 > ACPI: Local APIC address 0xfee00000 > ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) > ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) > ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) > ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) > ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) > IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 > ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) > ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) > ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) > ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) > ACPI: IRQ0 used by override. > ACPI: IRQ2 used by override. > ACPI: IRQ9 used by override. > ACPI: IRQ14 used by override. > ACPI: IRQ15 used by override. > Enabling APIC mode: Flat. Using 1 I/O APICs > Using ACPI (MADT) for SMP configuration information > ACPI: HPET id: 0x10de8201 base: 0xfed00000 > SMP: Allowing 4 CPUs, 2 hotplug CPUs > nr_irqs_gsi: 24 > PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 > PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 > PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 > Allocating PCI resources starting at 80000000 (gap: 70000000:8ec00000) > NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1 > PERCPU: Embedded 11 pages at c1e07000, static data 20828 bytes > Built 1 zonelists in Zone order, mobility grouping on. Total pages: 454943 > Kernel command line: BOOT_IMAGE=BlackB2-6-30 ro root=302 debug > log_level=7 console=ttyS0,38400N1 > Enabling fast FPU save and restore... done. > Enabling unmasked SIMD FPU exception support... done. > Initializing CPU#0 > NR_IRQS:512 > PID hash table entries: 4096 (order: 12, 16384 bytes) > Extended CMOS year: 2000 > Fast TSC calibration using PIT > Detected 2500.048 MHz processor. > spurious 8259A interrupt: IRQ7. > Console: colour dummy device 80x25 > console [ttyS0] enabled > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Initializing HighMem for node 0 (000377fe:0006ff90) > Memory: 1812932k/1834560k available (3003k kernel code, 20192k > reserved, 1249k data, 332k init, 925256k highmem) > virtual kernel memory layout: > fixmap : 0xfff4f000 - 0xfffff000 ( 704 kB) > pkmap : 0xff800000 - 0xffc00000 (4096 kB) > vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB) > lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB) > .init : 0xc052e000 - 0xc0581000 ( 332 kB) > .data : 0xc03eedf6 - 0xc0527408 (1249 kB) > .text : 0xc0100000 - 0xc03eedf6 (3003 kB) > Checking if this processor honours the WP bit even in supervisor mode...Ok. > hpet clockevent registered > Calibrating delay loop (skipped), value calculated using timer > frequency.. 5000.09 BogoMIPS (lpj=10000192) > Security Framework initialized > Mount-cache hash table entries: 512 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 0 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > using C1E aware idle routine > Checking 'hlt' instruction... OK. > ACPI: Core revision 20090320 > ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 > CPU0: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 > Booting processor 1 APIC 0x1 ip 0x6000 > Initializing CPU#1 > Calibrating delay using timer specific routine.. 4999.96 BogoMIPS (lpj=9999938) > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 512K (64 bytes/line) > CPU: Physical Processor ID: 0 > CPU: Processor Core ID: 1 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#1. > CPU1: AMD Athlon(tm) Dual Core Processor 4850e stepping 02 > Brought up 2 CPUs > System has AMD C1E enabled > Switch to broadcast mode on CPU1 > Total of 2 processors activated (10000.06 BogoMIPS). > Switch to broadcast mode on CPU0 > net_namespace: 992 bytes > regulator: core version 0.5 > NET: Registered protocol family 16 > ACPI: bus type pci registered > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: Not using MMCONFIG. > PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 > PCI: Using configuration type 1 for base access > bio: create slab <bio-0> at 0 > ACPI: EC: Look up EC in DSDT > ACPI: Interpreter enabled > ACPI: (supports S0 S1 S3 S4 S5) > ACPI: Using IOAPIC for interrupt routing > PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 > PCI: MCFG area at e0000000 reserved in ACPI motherboard resources > PCI: Using MMCONFIG for extended config space > ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - BB, > should be B2 [20090320] > ACPI: No dock devices found. > ACPI: PCI Root Bridge [PCI0] (0000:00) > pci 0000:00:01.0: reg 10 io port: [0x2f00-0x2fff] > pci 0000:00:01.1: reg 10 io port: [0x2900-0x293f] > pci 0000:00:01.1: reg 20 io port: [0x2d00-0x2d3f] > pci 0000:00:01.1: reg 24 io port: [0x2e00-0x2e3f] > pci 0000:00:01.1: PME# supported from D3hot D3cold > pci 0000:00:01.1: PME# disabled > pci 0000:00:01.3: reg 10 32bit mmio: [0xfad80000-0xfadfffff] > pci 0000:00:02.0: reg 10 32bit mmio: [0xfad7e000-0xfad7efff] > pci 0000:00:02.0: supports D1 D2 > pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.0: PME# disabled > pci 0000:00:02.1: reg 10 32bit mmio: [0xfad7fc00-0xfad7fcff] > pci 0000:00:02.1: supports D1 D2 > pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:02.1: PME# disabled > pci 0000:00:04.0: reg 10 32bit mmio: [0xfad7d000-0xfad7dfff] > pci 0000:00:04.0: supports D1 D2 > pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:04.0: PME# disabled > pci 0000:00:04.1: reg 10 32bit mmio: [0xfad7f800-0xfad7f8ff] > pci 0000:00:04.1: supports D1 D2 > pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:04.1: PME# disabled > pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf] > pci 0000:00:07.0: reg 10 32bit mmio: [0xfad78000-0xfad7bfff] > pci 0000:00:07.0: PME# supported from D3hot D3cold > pci 0000:00:07.0: PME# disabled > pci 0000:00:09.0: reg 10 io port: [0xc480-0xc487] > pci 0000:00:09.0: reg 14 io port: [0xc400-0xc403] > pci 0000:00:09.0: reg 18 io port: [0xc080-0xc087] > pci 0000:00:09.0: reg 1c io port: [0xc000-0xc003] > pci 0000:00:09.0: reg 20 io port: [0xbc00-0xbc0f] > pci 0000:00:09.0: reg 24 32bit mmio: [0xfad76000-0xfad77fff] > pci 0000:00:0a.0: reg 10 32bit mmio: [0xfad7c000-0xfad7cfff] > pci 0000:00:0a.0: reg 14 io port: [0xb880-0xb887] > pci 0000:00:0a.0: reg 18 32bit mmio: [0xfad7f400-0xfad7f4ff] > pci 0000:00:0a.0: reg 1c 32bit mmio: [0xfad7f000-0xfad7f00f] > pci 0000:00:0a.0: supports D1 D2 > pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0a.0: PME# disabled > pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:0b.0: PME# disabled > pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:10.0: PME# disabled > pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:13.0: PME# disabled > pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:00:14.0: PME# disabled > pci 0000:01:06.0: reg 10 io port: [0xdc00-0xdc7f] > pci 0000:01:06.0: reg 14 32bit mmio: [0xfaeffc00-0xfaeffc7f] > pci 0000:01:06.0: reg 30 32bit mmio: [0xfaec0000-0xfaedffff] > pci 0000:01:06.0: supports D1 D2 > pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot D3cold > pci 0000:01:06.0: PME# disabled > pci 0000:01:07.0: reg 10 32bit mmio: [0xfaeff000-0xfaeff7ff] > pci 0000:01:07.0: supports D1 D2 > pci 0000:00:08.0: transparent bridge > pci 0000:00:08.0: bridge io port: [0xd000-0xdfff] > pci 0000:00:08.0: bridge 32bit mmio: [0xfae00000-0xfaefffff] > pci 0000:02:00.0: reg 10 32bit mmio: [0xfb000000-0xfbffffff] > pci 0000:02:00.0: reg 14 64bit mmio: [0xf0000000-0xf7ffffff] > pci 0000:02:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff] > pci 0000:02:00.0: reg 24 io port: [0xec00-0xec7f] > pci 0000:02:00.0: reg 30 32bit mmio: [0xfafe0000-0xfaffffff] > pci 0000:00:0b.0: bridge io port: [0xe000-0xefff] > pci 0000:00:0b.0: bridge 32bit mmio: [0xfaf00000-0xfbffffff] > pci 0000:00:0b.0: bridge 64bit mmio pref: [0xf0000000-0xf9ffffff] > pci_bus 0000:00: on NUMA node 0 > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT] > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10 > ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11 > ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10 > ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11 > ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15 > ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled. > ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10 > ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *15 > ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10 > ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *15 > ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *7 > ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 > ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *10 > ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5 > ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. > ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *11 > ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10 > SCSI subsystem initialized > libata version 3.00 loaded. > usbcore: registered new interface driver usbfs > usbcore: registered new interface driver hub > usbcore: registered new device driver usb > PCI: Using ACPI for IRQ routing > Switched to high resolution mode on CPU 0 > Switched to high resolution mode on CPU 1 > pnp: PnP ACPI init > ACPI: bus type pnp registered > pnp: PnP ACPI: found 13 devices > ACPI: ACPI bus type pnp unregistered > system 00:05: ioport range 0x4d0-0x4d1 has been reserved > system 00:05: ioport range 0x800-0x80f has been reserved > system 00:05: ioport range 0x2000-0x207f has been reserved > system 00:05: ioport range 0x2080-0x20ff has been reserved > system 00:05: ioport range 0x2400-0x247f has been reserved > system 00:05: ioport range 0x2480-0x24ff has been reserved > system 00:05: ioport range 0x2800-0x287f has been reserved > system 00:05: ioport range 0x2880-0x28ff has been reserved > system 00:05: iomem range 0xfed04000-0xfed04fff has been reserved > system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved > system 00:08: ioport range 0xc00-0xc0f has been reserved > system 00:08: ioport range 0xd00-0xd0f has been reserved > system 00:08: ioport range 0xa20-0xa2f has been reserved > system 00:08: ioport range 0xa30-0xa3f has been reserved > system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved > system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved > system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved > system 00:0c: iomem range 0x0-0x9ffff could not be reserved > system 00:0c: iomem range 0xc0000-0xcffff could not be reserved > system 00:0c: iomem range 0xe0000-0xfffff could not be reserved > system 00:0c: iomem range 0x100000-0x7fffffff could not be reserved > system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved > pci 0000:00:08.0: PCI bridge, secondary bus 0000:01 > pci 0000:00:08.0: IO window: 0xd000-0xdfff > pci 0000:00:08.0: MEM window: 0xfae00000-0xfaefffff > pci 0000:00:08.0: PREFETCH window: 0x00000080000000-0x000000800fffff > pci 0000:00:0b.0: PCI bridge, secondary bus 0000:02 > pci 0000:00:0b.0: IO window: 0xe000-0xefff > pci 0000:00:0b.0: MEM window: 0xfaf00000-0xfbffffff > pci 0000:00:0b.0: PREFETCH window: 0x000000f0000000-0x000000f9ffffff > pci 0000:00:10.0: PCI bridge, secondary bus 0000:03 > pci 0000:00:10.0: IO window: disabled > pci 0000:00:10.0: MEM window: disabled > pci 0000:00:10.0: PREFETCH window: disabled > pci 0000:00:13.0: PCI bridge, secondary bus 0000:04 > pci 0000:00:13.0: IO window: disabled > pci 0000:00:13.0: MEM window: disabled > pci 0000:00:13.0: PREFETCH window: disabled > pci 0000:00:14.0: PCI bridge, secondary bus 0000:05 > pci 0000:00:14.0: IO window: disabled > pci 0000:00:14.0: MEM window: disabled > pci 0000:00:14.0: PREFETCH window: disabled > pci 0000:00:08.0: setting latency timer to 64 > pci 0000:00:0b.0: setting latency timer to 64 > ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19 > pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19 > pci 0000:00:10.0: setting latency timer to 64 > ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18 > pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18 > pci 0000:00:13.0: setting latency timer to 64 > ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17 > pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17 > pci 0000:00:14.0: setting latency timer to 64 > pci_bus 0000:00: resource 0 io: [0x00-0xffff] > pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff] > pci_bus 0000:01: resource 0 io: [0xd000-0xdfff] > pci_bus 0000:01: resource 1 mem: [0xfae00000-0xfaefffff] > pci_bus 0000:01: resource 2 pref mem [0x80000000-0x800fffff] > pci_bus 0000:01: resource 3 io: [0x00-0xffff] > pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffff] > pci_bus 0000:02: resource 0 io: [0xe000-0xefff] > pci_bus 0000:02: resource 1 mem: [0xfaf00000-0xfbffffff] > pci_bus 0000:02: resource 2 pref mem [0xf0000000-0xf9ffffff] > NET: Registered protocol family 2 > IP route cache hash table entries: 32768 (order: 5, 131072 bytes) > TCP established hash table entries: 131072 (order: 8, 1048576 bytes) > TCP bind hash table entries: 65536 (order: 7, 524288 bytes) > TCP: Hash tables configured (established 131072 bind 65536) > TCP reno registered > NET: Registered protocol family 1 > highmem bounce pool size: 64 pages > VFS: Disk quotas dquot_6.5.2 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > msgmni has been set to 1735 > alg: No test for stdrng (krng) > io scheduler noop registered > io scheduler anticipatory registered (default) > io scheduler deadline registered > io scheduler cfq registered > pci 0000:02:00.0: Boot video device > pcieport-driver 0000:00:10.0: setting latency timer to 64 > pcieport-driver 0000:00:13.0: setting latency timer to 64 > pcieport-driver 0000:00:14.0: setting latency timer to 64 > pci_hotplug: PCI Hot Plug PCI Core version: 0.5 > vesafb: framebuffer at 0xf9000000, mapped to 0xf8080000, using 3072k, > total 14336k > vesafb: mode is 1024x768x16, linelength=2048, pages=1 > vesafb: protected mode interface info at c000:ba00 > vesafb: pmi: set display start = c00cba63, set palette = c00cbabe > vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc > 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > Console: switching to colour frame buffer device 128x48 > fb0: VESA VGA frame buffer device > Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled > ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > brd: module loaded > loop: module loaded > Uniform Multi-Platform E-IDE driver > amd74xx 0000:00:06.0: UDMA133 controller > amd74xx 0000:00:06.0: IDE controller (0x10de:0x0759 rev 0xa1) > amd74xx 0000:00:06.0: IDE port disabled > amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround. > amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later > ide0: BM-DMA at 0xffa0-0xffa7 > Probing IDE interface ide0... > hda: ST380215A, ATA DISK drive > hdb: HL-DT-STDVDRRW GSA-4166B, ATAPI CD/DVD-ROM drive > hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hda: UDMA/100 mode selected > hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4 > hdb: UDMA/66 mode selected > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > ide_generic: please use "probe_mask=0x3f" module parameter for probing > all legacy ISA IDE ports > ide-gd driver 1.18 > hda: max request size: 512KiB > hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63 > hda: cache flushes supported > hda: hda1 hda2 hda3 > ide-cd driver 5.00 > ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache > Uniform CD-ROM driver Revision: 3.20 > BUG: unable to handle kernel NULL pointer dereference at 00000024 > IP: [<c02b7cdf>] ide_complete_rq+0x1f/0x60 > *pde = 00000000 > Oops: 0000 [#1] SMP > last sysfs file: > Modules linked in: > > Pid: 0, comm: swapper Not tainted (2.6.30 #2) System Product Name > EIP: 0060:[<c02b7cdf>] EFLAGS: 00010292 CPU: 1 > EIP is at ide_complete_rq+0x1f/0x60 > EAX: f69c9000 EBX: 00000000 ECX: 00000200 EDX: fffffffb > ESI: fffffffb EDI: f69f0c00 EBP: f706fe30 ESP: f706fe1c > DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 > Process swapper (pid: 0, ti=f706e000 task=f705e720 task.ti=f706e000) > Stack: > 00000022 f69c9000 f6a0c680 00000000 00000000 f706fe80 c02cb4a1 00000000 > f706fe44 c0116b0d f706fe60 f69f0c00 0006fe78 00000050 0006fe6c f69c9000 > f69c9094 f6a0c680 00000000 00000000 f706fe80 03120022 f69e6c40 f69c9000 > Call Trace: > [<c02cb4a1>] ? cdrom_newpc_intr+0x2b1/0x8d0 > [<c0116b0d>] ? read_hpet+0xd/0x20 > [<c02b7a90>] ? ide_intr+0x1a0/0x1f0 > [<c0143c19>] ? tick_dev_program_event+0x79/0xb0 > [<c02cb1f0>] ? cdrom_newpc_intr+0x0/0x8d0 > [<c01519f7>] ? handle_IRQ_event+0x37/0xc0 > [<c01540a4>] ? move_native_irq+0x14/0x50 > [<c0153673>] ? handle_edge_irq+0xb3/0x120 > [<c010520a>] ? handle_irq+0x1a/0x30 > [<c01049e6>] ? do_IRQ+0x46/0xa0 > [<c0103329>] ? common_interrupt+0x29/0x30 > [<c01097d8>] ? default_idle+0x38/0x50 > [<c0109b10>] ? c1e_idle+0x90/0xf0 > [<c0101da5>] ? cpu_idle+0x35/0x60 > [<c03e9a42>] ? start_secondary+0x172/0x1e0 > Code: 00 eb db 89 f6 8d bc 27 00 00 00 00 55 89 e5 83 ec 14 89 75 f8 > 89 7d fc 89 c7 89 5d f4 8b 40 28 89 d6 89 45 f0 8b 98 d0 01 00 00 <f6> > 43 24 0e 0f 95 c2 85 f6 0f 9e c0 84 c2 74 06 8b 4b 44 c1 e1 > EIP: [<c02b7cdf>] ide_complete_rq+0x1f/0x60 SS:ESP 0068:f706fe1c > CR2: 0000000000000024 > ---[ end trace fa721a14f0610390 ]--- > Kernel panic - not syncing: Fatal exception in interrupt > Pid: 0, comm: swapper Tainted: G D 2.6.30 #2 > Call Trace: > [<c0126016>] panic+0x46/0xf0 > [<c0106174>] oops_end+0x84/0x90 > [<c0117c87>] no_context+0x117/0x150 > [<c0117db8>] __bad_area_nosemaphore+0x48/0x130 > [<c011c9a8>] ? __wake_up_common+0x48/0x70 > [<c0117f42>] bad_area_nosemaphore+0x12/0x20 > [<c0118098>] do_page_fault+0x88/0x240 > [<c0118010>] ? do_page_fault+0x0/0x240 > [<c03ee2ed>] error_code+0x6d/0x74 > [<c0118010>] ? do_page_fault+0x0/0x240 > [<c02b7cdf>] ? ide_complete_rq+0x1f/0x60 > [<c02cb4a1>] cdrom_newpc_intr+0x2b1/0x8d0 > [<c0116b0d>] ? read_hpet+0xd/0x20 > [<c02b7a90>] ide_intr+0x1a0/0x1f0 > [<c0143c19>] ? tick_dev_program_event+0x79/0xb0 > [<c02cb1f0>] ? cdrom_newpc_intr+0x0/0x8d0 > [<c01519f7>] handle_IRQ_event+0x37/0xc0 > [<c01540a4>] ? move_native_irq+0x14/0x50 > [<c0153673>] handle_edge_irq+0xb3/0x120 > [<c010520a>] handle_irq+0x1a/0x30 > [<c01049e6>] do_IRQ+0x46/0xa0 > [<c0103329>] common_interrupt+0x29/0x30 > [<c01097d8>] ? default_idle+0x38/0x50 > [<c0109b10>] c1e_idle+0x90/0xf0 > [<c0101da5>] cpu_idle+0x35/0x60 > [<c03e9a42>] start_secondary+0x172/0x1e0 > > > 00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory > Controller (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0 > Capabilities: [94] HyperTransport: #1a > Capabilities: [60] HyperTransport: Retry Mode > Capabilities: [44] HyperTransport: Slave or Primary Interface > Capabilities: [d0] HyperTransport: #1c > > 00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0 > I/O ports at 2f00 [size=256] > > 00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: 66MHz, fast devsel, IRQ 11 > I/O ports at 2900 [size=64] > I/O ports at 2d00 [size=64] > I/O ports at 2e00 [size=64] > Capabilities: [44] Power Management version 2 > Kernel modules: i2c-nforce2 > > 00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory > Controller (rev a1) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: 66MHz, fast devsel > > 00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] > Co-Processor (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 10 > Memory at fad80000 (32-bit, non-prefetchable) [size=512K] > > 00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory > Controller (rev a1) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: 66MHz, fast devsel > > 00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI > USB 1.1 Controller (rev a1) (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 > Memory at fad7e000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > > 00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI > USB 2.0 Controller (rev a1) (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 > Memory at fad7fc00 (32-bit, non-prefetchable) [size=256] > Capabilities: [44] Debug port: BAR=1 offset=00a0 > Capabilities: [80] Power Management version 2 > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI > USB 1.1 Controller (rev a1) (prog-if 10 [OHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20 > Memory at fad7d000 (32-bit, non-prefetchable) [size=4K] > Capabilities: [44] Power Management version 2 > Kernel driver in use: ohci_hcd > Kernel modules: ohci-hcd > > 00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI > USB 2.0 Controller (rev a1) (prog-if 20 [EHCI]) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 > Memory at fad7f800 (32-bit, non-prefetchable) [size=256] > Capabilities: [44] Debug port: BAR=1 offset=00a0 > Capabilities: [80] Power Management version 2 > Kernel driver in use: ehci_hcd > Kernel modules: ehci-hcd > > 00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE > (rev a1) (prog-if 8a [Master SecP PriP]) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0 > [virtual] Memory at 000001f0 (32-bit, non-prefetchable) > [disabled] [size=8] > [virtual] Memory at 000003f0 (type 3, non-prefetchable) > [disabled] [size=1] > [virtual] Memory at 00000170 (32-bit, non-prefetchable) > [disabled] [size=8] > [virtual] Memory at 00000370 (type 3, non-prefetchable) > [disabled] [size=1] > I/O ports at ffa0 [size=16] > Capabilities: [44] Power Management version 2 > Kernel driver in use: AMD_IDE > > 00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S > High Definition Audio (rev a1) > Subsystem: ASUSTeK Computer Inc. Unknown device 836c > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 21 > Memory at fad78000 (32-bit, non-prefetchable) [size=16K] > Capabilities: [44] Power Management version 2 > Kernel driver in use: HDA Intel > Kernel modules: snd-hda-intel > > 00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI > Bridge (rev a1) (prog-if 01 [Subtractive decode]) > Flags: bus master, 66MHz, fast devsel, latency 0 > Bus: primary=00, secondary=01, subordinate=01, sec-latency=32 > I/O behind bridge: 0000d000-0000dfff > Memory behind bridge: fae00000-faefffff > Prefetchable memory behind bridge: 80000000-800fffff > Capabilities: [b8] Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed- > > 00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA > Controller (non-AHCI mode) (rev a2) (prog-if 85 [Master SecO PriO]) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 23 > I/O ports at c480 [size=8] > I/O ports at c400 [size=4] > I/O ports at c080 [size=8] > I/O ports at c000 [size=4] > I/O ports at bc00 [size=16] > Memory at fad76000 (32-bit, non-prefetchable) [size=8K] > Capabilities: [44] Power Management version 2 > Capabilities: [8c] SATA HBA <?> > Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/3 Enable- > Capabilities: [ec] HyperTransport: MSI Mapping Enable- Fixed+ > Kernel driver in use: ahci > > 00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 22 > Memory at fad7c000 (32-bit, non-prefetchable) [size=4K] > I/O ports at b880 [size=8] > Memory at fad7f400 (32-bit, non-prefetchable) [size=256] > Memory at fad7f000 (32-bit, non-prefetchable) [size=16] > Capabilities: [44] Power Management version 2 > Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ > Queue=0/4 Enable- > Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+ > Kernel driver in use: forcedeth > Kernel modules: forcedeth > > 00:0b.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI > Express Bridge (rev a1) (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 > I/O behind bridge: 0000e000-0000efff > Memory behind bridge: faf00000-fbffffff > Prefetchable memory behind bridge: 00000000f0000000-00000000f9ffffff > Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Capabilities: [48] Power Management version 2 > Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed- > Kernel modules: shpchp > > 00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI > Express Bridge (rev a1) (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 > Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Capabilities: [48] Power Management version 3 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/1 Enable- > Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed- > Capabilities: [80] Express Root Port (Slot+), MSI 00 > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI > Bridge (rev a1) (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 > Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Capabilities: [48] Power Management version 3 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/1 Enable- > Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed- > Capabilities: [80] Express Root Port (Slot+), MSI 00 > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI > Bridge (rev a1) (prog-if 00 [Normal decode]) > Flags: bus master, fast devsel, latency 0 > Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 > Capabilities: [40] Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Capabilities: [48] Power Management version 3 > Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/1 Enable- > Capabilities: [60] HyperTransport: MSI Mapping Enable+ Fixed- > Capabilities: [80] Express Root Port (Slot+), MSI 00 > Kernel driver in use: pcieport-driver > Kernel modules: shpchp > > 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] HyperTransport Technology Configuration > Flags: fast devsel > Capabilities: [80] HyperTransport: Host or Secondary Interface > > 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Address Map > Flags: fast devsel > > 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] DRAM Controller > Flags: fast devsel > > 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 > [Athlon64/Opteron] Miscellaneous Control > Flags: fast devsel > Capabilities: [f0] Secure device <?> > Kernel driver in use: k8temp > Kernel modules: k8temp > > 01:06.0 Ethernet controller: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74) > Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for > PC Management NIC > Flags: bus master, medium devsel, latency 32, IRQ 16 > I/O ports at dc00 [size=128] > Memory at faeffc00 (32-bit, non-prefetchable) [size=128] > Expansion ROM at 80000000 [disabled] [size=128K] > Capabilities: [dc] Power Management version 2 > Kernel driver in use: 3c59x > Kernel modules: 3c59x > > 01:07.0 Multimedia controller: Philips Semiconductors > SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > Subsystem: Pinnacle Systems Inc. PCTV 110i (saa7133) > Flags: bus master, medium devsel, latency 32, IRQ 11 > Memory at faeff000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [40] Power Management version 2 > Kernel modules: saa7134 > > 02:00.0 VGA compatible controller: nVidia Corporation C77 [GeForce > 8300] (rev a2) (prog-if 00 [VGA controller]) > Subsystem: ASUSTeK Computer Inc. Unknown device 82e2 > Flags: bus master, fast devsel, latency 0, IRQ 20 > Memory at fb000000 (32-bit, non-prefetchable) [size=16M] > Memory at f0000000 (64-bit, prefetchable) [size=128M] > Memory at f8000000 (64-bit, prefetchable) [size=32M] > I/O ports at ec00 [size=128] > [virtual] Expansion ROM at fafe0000 [disabled] [size=128K] > Capabilities: [60] Power Management version 2 > Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ > Queue=0/0 Enable- > Kernel driver in use: nvidia > Kernel modules: nvidiafb, nvidia -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
