Currently libata-acpi can only filter DIPM among SATA feature enables
via _GTF. This patch adds the capability to filter out FPDMA non-zero
offset, in-order guarantee and auto-activation.
Signed-off-by: Tejun Heo <tj@xxxxxxxxxx>
---
drivers/ata/libata-acpi.c | 19 +++++++++++++++----
include/linux/ata.h | 3 +++
include/linux/libata.h | 2 ++
3 files changed, 20 insertions(+), 4 deletions(-)
Index: ata/drivers/ata/libata-acpi.c
===================================================================
--- ata.orig/drivers/ata/libata-acpi.c
+++ ata/drivers/ata/libata-acpi.c
@@ -22,7 +22,7 @@
static unsigned int ata_acpi_gtf_filter = ATA_ACPI_FILTER_DEFAULT;
module_param_named(acpi_gtf_filter, ata_acpi_gtf_filter, int, 0644);
-MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM)");
+MODULE_PARM_DESC(acpi_gtf_filter, "filter mask for ACPI _GTF commands, set to filter out (0x1=set xfermode, 0x2=lock/freeze lock, 0x4=DIPM, 0x8=FPDMA non-zero offset, 0x10=FPDMA DMA Setup FIS auto-activate)");
#define NO_PORT_MULT 0xffff
#define SATA_ADR(root, pmp) (((root) << 16) | (pmp))
@@ -637,12 +637,23 @@ static int ata_acpi_filter_tf(const stru
return 1;
}
- if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM) {
+ if (tf->command == ATA_CMD_SET_FEATURES &&
+ tf->feature == SETFEATURES_SATA_ENABLE) {
/* inhibit enabling DIPM */
- if (tf->command == ATA_CMD_SET_FEATURES &&
- tf->feature == SETFEATURES_SATA_ENABLE &&
+ if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_DIPM &&
tf->nsect == SATA_DIPM)
return 1;
+
+ /* inhibit FPDMA non-zero offset */
+ if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_FPDMA_OFFSET &&
+ (tf->nsect == SATA_FPDMA_OFFSET ||
+ tf->nsect == SATA_FPDMA_IN_ORDER))
+ return 1;
+
+ /* inhibit FPDMA auto activation */
+ if (ata_acpi_gtf_filter & ATA_ACPI_FILTER_FPDMA_AA &&
+ tf->nsect == SATA_FPDMA_AA)
+ return 1;
}
return 0;
Index: ata/include/linux/ata.h
===================================================================
--- ata.orig/include/linux/ata.h
+++ ata/include/linux/ata.h
@@ -334,9 +334,12 @@ enum {
SETFEATURES_SATA_DISABLE = 0x90, /* Disable use of SATA feature */
/* SETFEATURE Sector counts for SATA features */
+ SATA_FPDMA_OFFSET = 0x01, /* FPDMA non-zero buffer offsets */
SATA_FPDMA_AA = 0x02, /* FPDMA Setup FIS Auto-Activate */
SATA_DIPM = 0x03, /* Device Initiated Power Management */
+ SATA_FPDMA_IN_ORDER = 0x04, /* FPDMA in-order data delivery */
SATA_AN = 0x05, /* Asynchronous Notification */
+ SATA_SSP = 0x06, /* Software Settings Preservation */
/* feature values for SET_MAX */
ATA_SET_MAX_ADDR = 0x00,
Index: ata/include/linux/libata.h
===================================================================
--- ata.orig/include/linux/libata.h
+++ ata/include/linux/libata.h
@@ -423,6 +423,8 @@ enum {
ATA_ACPI_FILTER_SETXFER = 1 << 0,
ATA_ACPI_FILTER_LOCK = 1 << 1,
ATA_ACPI_FILTER_DIPM = 1 << 2,
+ ATA_ACPI_FILTER_FPDMA_OFFSET = 1 << 3, /* FPDMA non-zero offset */
+ ATA_ACPI_FILTER_FPDMA_AA = 1 << 4, /* FPDMA auto activate */
ATA_ACPI_FILTER_DEFAULT = ATA_ACPI_FILTER_SETXFER |
ATA_ACPI_FILTER_LOCK |
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
