On Monday 28 January 2008, Gene Heskett wrote:
While reading this msg as it came back, I locked up again and rebooted to
2.6.24, and got lucky (maybe) as the attached dmesg will show quite a few
instances of this LOOOONNNGG before the nvidia driver is loaded to taint the
kernel. Have fun guys!
>On Monday 28 January 2008, Mikael Pettersson wrote:
>>Gene Heskett writes:
>> > On Monday 28 January 2008, Peter Zijlstra wrote:
>> > >On Mon, 2008-01-28 at 09:17 +0100, Mikael Pettersson wrote:
>> > >> 1. Wrong mailing list; use linux-ide (@vger) instead.
>> > >
>> > >What, and keep all us other interested people in the dark?
>> >
>> > As a test, I tried rebooting to the latest fedora kernel and found it
>> > kills X, so I'm back to the second to last fedora version ATM, and the
>> > third 'smartctl -t lng /dev/sda' in 24 hours is running now. The first
>> > two completed with no errors.
>> >
>> > I've added the linux-ide list to refresh those people of the problem,
>> > the logs are being spammed by this message stanza:
>> >
>> > Jan 28 04:46:25 coyote kernel: [26550.290016] ata1.00: exception Emask
>> > 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Jan 28 04:46:25 coyote kernel:
>> > [26550.290028] ata1.00: cmd 35/00:58:c9:9c:0a/00:01:00:00:00/e0 tag 0
>> > dma 176128 out Jan 28 04:46:25 coyote kernel: [26550.290029]
>> > res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout) Jan 28
>> > 04:46:25 coyote kernel: [26550.290032] ata1.00: status: { DRDY } Jan 28
>> > 04:46:25 coyote kernel: [26550.290060] ata1: soft resetting link Jan 28
>> > 04:46:25 coyote kernel: [26550.452301] ata1.00: configured for UDMA/100
>> > Jan 28 04:46:25 coyote kernel: [26550.452318] ata1: EH complete
>> > Jan 28 04:46:25 coyote kernel: [26550.455898] sd 0:0:0:0: [sda]
>> > 390721968 512-byte hardware sectors (200050 MB) Jan 28 04:46:25 coyote
>> > kernel: [26550.456151] sd 0:0:0:0: [sda] Write Protect is off Jan 28
>> > 04:46:25 coyote kernel: [26550.456403] sd 0:0:0:0: [sda] Write cache:
>> > enabled, read cache: enabled, doesn't support DPO or FUA
>>
>>It's not obvious from this incomplete dmesg log what HW or driver
>>is behind ata1, but if the 2.6.24-rc7 kernel matches the 2.6.24 one,
>>
>>it should be pata_amd driving a WDC disk:
>> > [ 30.702887] pata_amd 0000:00:09.0: version 0.3.10
>> > [ 30.703052] PCI: Setting latency timer of device 0000:00:09.0 to 64
>> > [ 30.703188] scsi0 : pata_amd
>> > [ 30.709313] scsi1 : pata_amd
>> > [ 30.710076] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000
>> > irq 14 [ 30.710079] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma
>> > 0xf008 irq 15 [ 30.864753] ata1.00: ATA-6: WDC WD2000JB-00EVA0,
>> > 15.05R15, max UDMA/100 [ 30.864756] ata1.00: 390721968 sectors, multi
>> > 16: LBA48
>> > [ 30.871629] ata1.00: configured for UDMA/100
>>
>>Unfortunately we also see:
>> > [ 48.285456] nvidia: module license 'NVIDIA' taints kernel.
>> > [ 48.549725] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI
>> > 19 (level, high) -> IRQ 20 [ 48.550149] NVRM: loading NVIDIA UNIX x86
>> > Kernel Module 169.07 Thu Dec 13 18:42:56 PST 2007
>>
>>We have no way of debugging that module, so please try 2.6.24 without it.
>
>Sorry, I can't do this and have a working machine. The nv driver has
> suffered bit rot or something since the FC2 days when it COULD run a 19"
> crt at 1600x1200, and will not drive this 20" wide screen lcd 1680x1050
> monitor at more than 800x600, which is absolutely butt ugly fuzzy, looking
> like a jpg compressed to 10%. The system is not usable on a day to basis
> without the nvidia driver.
>
>Fix the nv driver so it will run this screen at its native resolution and
> I'll be glad to run it even if it won't run google earth, which I do use
> from time to time. Now, if in all the hits you can get from google on
> this, currently 14,800 just for 'exception Emask', apparently caused by a
> timeout, if 100% of the complainers are running nvidia drivers also, then I
> see a legit complaint. Again, fix the nv driver so it will run my screen &
> I'll be glad to switch. I can see the reason, sure, but the machine must
> be capable of doing its common day to day stuff, while using that driver,
> like running kde for kmail, and browsers that work.
>
>>If the problems persist, please try to capture a complete log from the
>>failing kernel -- the interesting bits are everything from initial boot
>>up to and including the first few errors. You may need to increase the
>>kernel's log buffer size if the log gets truncated (CONFIG_LOG_BUF_SHIFT).
>
>If by log you mean /var/log/messages, I have several megabytes of those.
>If you mean a live dmesg capture taken right now, its attached. It contains
>several of these at the bottom. I long ago made the kernel log buffer
>bigger, cuz it couldn't even show the start immediately after the boot, and
>even the dump to syslog was truncated.
>
>>There are no pata_amd changes from 2.6.24-rc7 to 2.6.24 final.
>
>That is what I was afraid of. I've done some limited grepping in that
> branch of the kernel tree, and cannot seem to locate where this EH handler
> is being invoked from.
>
>There is 2 lines of interest in the dmesg:
>
>[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
>[ 0.000000] If you got timer trouble try acpi_use_timer_override
>
>But I have NDI what it means, kernel argument/xconfig option?
>
>I've also done some googling, and it appears this problem is fairly
> widespread since the switchover to libata was encouraged. A stock fedora
> F8 kernel suffers the same freezes and eventually locks up, but does it
> without the error messages being logged, it just freezes, feeling identical
> to this in the minutes before the total freeze. I've tried 2 of those too,
> but the newest one won't even run X.
--
Cheers, Gene
"There are four boxes to be used in defense of liberty:
soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
Deprive a mirror of its silver and even the Czar won't see his face.
[ 0.000000] Linux version 2.6.24 (root@xxxxxxxxxxxxxxxxx) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Thu Jan 24 20:17:55 EST 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 262128
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 262128
[ 0.000000] On node 0 totalpages: 262128
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 255 pages used for memmap
[ 0.000000] HighMem zone: 32497 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP 000F7220, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 3FFF30C0, 4CC4 (r1 NVIDIA AWRDACPI 1000 MSFT 100000E)
[ 0.000000] ACPI: FACS 3FFF0000, 0040
[ 0.000000] ACPI: APIC 3FFF7DC0, 006E (r1 Nvidia AWRDACPI 42302E31 AWRD 0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:10 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260081
[ 0.000000] Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] CPU 0 irqstacks, hard=c0743000 soft=c0723000
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2079.540 MHz processor.
[ 24.833457] Console: colour VGA+ 80x25
[ 24.833460] console [tty0] enabled
[ 24.834029] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 24.834561] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 24.865989] Memory: 1031080k/1048512k available (1951k kernel code, 16692k reserved, 986k data, 240k init, 131008k highmem)
[ 24.865998] virtual kernel memory layout:
[ 24.865999] fixmap : 0xffc55000 - 0xfffff000 (3752 kB)
[ 24.866001] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 24.866002] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 24.866003] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 24.866004] .init : 0xc06e4000 - 0xc0720000 ( 240 kB)
[ 24.866006] .data : 0xc05e7cd4 - 0xc06de6e4 ( 986 kB)
[ 24.866007] .text : 0xc0400000 - 0xc05e7cd4 (1951 kB)
[ 24.866010] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 24.866059] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 24.926020] Calibrating delay using timer specific routine.. 4160.90 BogoMIPS (lpj=2080453)
[ 24.926053] Security Framework initialized
[ 24.926059] SELinux: Initializing.
[ 24.926072] SELinux: Starting in permissive mode
[ 24.926086] selinux_register_security: Registering secondary module capability
[ 24.926088] Capability LSM initialized as secondary
[ 24.926098] Mount-cache hash table entries: 512
[ 24.926267] CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 00000000
[ 24.926275] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 24.926278] CPU: L2 Cache: 512K (64 bytes/line)
[ 24.926280] CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000 00000000
[ 24.926286] Intel machine check architecture supported.
[ 24.926289] Intel machine check reporting enabled on CPU#0.
[ 24.926294] Compat vDSO mapped to ffffe000.
[ 24.926308] Checking 'hlt' instruction... OK.
[ 24.930188] SMP alternatives: switching to UP code
[ 24.930705] Freeing SMP alternatives: 13k freed
[ 24.930709] ACPI: Core revision 20070126
[ 24.933945] CPU0: AMD Athlon(tm) XP 2800+ stepping 00
[ 24.933969] Total of 1 processors activated (4160.90 BogoMIPS).
[ 24.934176] ENABLING IO-APIC IRQs
[ 24.934367] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 25.045973] Brought up 1 CPUs
[ 25.046000] CPU0 attaching sched-domain:
[ 25.046003] domain 0: span 00000001
[ 25.046005] groups: 00000001
[ 25.046221] net_namespace: 64 bytes
[ 25.046717] Time: 16:50:13 Date: 01/28/08
[ 25.046749] NET: Registered protocol family 16
[ 25.046994] ACPI: bus type pci registered
[ 25.082395] PCI: PCI BIOS revision 2.10 entry at 0xfb4c0, last bus=2
[ 25.082398] PCI: Using configuration type 1
[ 25.082400] Setting up standard PCI resources
[ 25.090219] ACPI: EC: Look up EC in DSDT
[ 25.096032] ACPI: Interpreter enabled
[ 25.096036] ACPI: (supports S0 S1 S4 S5)
[ 25.096050] ACPI: Using IOAPIC for interrupt routing
[ 25.106449] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 25.106527] PCI: nForce2 C1 Halt Disconnect fixup
[ 25.107549] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 25.107727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 25.107996] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
[ 25.163644] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 25.163843] ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 25.164039] ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 25.164230] ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 25.164420] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 25.164612] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 25.164811] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 25.165008] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 25.165200] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 25.165392] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[ 25.165586] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 25.165778] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 25.165977] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 25.166171] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 25.166362] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 25.166553] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 25.166714] ACPI: PCI Interrupt Link [APC1] (IRQs *16)
[ 25.166865] ACPI: PCI Interrupt Link [APC2] (IRQs *17)
[ 25.167015] ACPI: PCI Interrupt Link [APC3] (IRQs *18)
[ 25.167162] ACPI: PCI Interrupt Link [APC4] (IRQs *19)
[ 25.167316] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[ 25.167526] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0
[ 25.167736] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0
[ 25.167953] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0
[ 25.168163] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[ 25.168373] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0
[ 25.168581] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[ 25.168731] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[ 25.168945] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0
[ 25.169154] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[ 25.169363] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[ 25.169572] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[ 25.169732] ACPI: Power Resource [ISAV] (on)
[ 25.169789] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 25.169831] pnp: PnP ACPI init
[ 25.169840] ACPI: bus type pnp registered
[ 25.175979] pnp: PnP ACPI: found 16 devices
[ 25.175981] ACPI: ACPI bus type pnp unregistered
[ 25.176170] usbcore: registered new interface driver usbfs
[ 25.176242] usbcore: registered new interface driver hub
[ 25.176292] usbcore: registered new device driver usb
[ 25.176405] PCI: Using ACPI for IRQ routing
[ 25.176409] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 25.226746] NetLabel: Initializing
[ 25.226748] NetLabel: domain hash size = 128
[ 25.226750] NetLabel: protocols = UNLABELED CIPSOv4
[ 25.226762] NetLabel: unlabeled traffic allowed by default
[ 25.227736] Time: tsc clocksource has been installed.
[ 25.229773] system 00:00: ioport range 0x4000-0x407f has been reserved
[ 25.229777] system 00:00: ioport range 0x4080-0x40ff has been reserved
[ 25.229780] system 00:00: ioport range 0x4400-0x447f has been reserved
[ 25.229783] system 00:00: ioport range 0x4480-0x44ff has been reserved
[ 25.229786] system 00:00: ioport range 0x4200-0x427f has been reserved
[ 25.229788] system 00:00: ioport range 0x4280-0x42ff has been reserved
[ 25.229795] system 00:01: ioport range 0x5000-0x503f has been reserved
[ 25.229798] system 00:01: ioport range 0x5100-0x513f has been reserved
[ 25.229804] system 00:02: iomem range 0xda800-0xdbfff has been reserved
[ 25.229807] system 00:02: iomem range 0xf0000-0xf7fff could not be reserved
[ 25.229812] system 00:02: iomem range 0xf8000-0xfbfff could not be reserved
[ 25.229815] system 00:02: iomem range 0xfc000-0xfffff could not be reserved
[ 25.229818] system 00:02: iomem range 0x3fff0000-0x3fffffff could not be reserved
[ 25.229822] system 00:02: iomem range 0xffff0000-0xffffffff could not be reserved
[ 25.229825] system 00:02: iomem range 0x0-0x9ffff could not be reserved
[ 25.229828] system 00:02: iomem range 0x100000-0x3ffeffff could not be reserved
[ 25.229831] system 00:02: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 25.229834] system 00:02: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 25.229840] system 00:04: ioport range 0xb78-0xb7b has been reserved
[ 25.229843] system 00:04: ioport range 0xf78-0xf7b has been reserved
[ 25.229845] system 00:04: ioport range 0xa78-0xa7b has been reserved
[ 25.229848] system 00:04: ioport range 0xe78-0xe7b has been reserved
[ 25.229851] system 00:04: ioport range 0xbbc-0xbbf has been reserved
[ 25.229854] system 00:04: ioport range 0xfbc-0xfbf has been reserved
[ 25.229856] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[ 25.229859] system 00:04: ioport range 0x294-0x297 has been reserved
[ 25.260349] PCI: Bridge: 0000:00:08.0
[ 25.260352] IO window: 9000-afff
[ 25.260357] MEM window: e3000000-e6ffffff
[ 25.260361] PREFETCH window: 50000000-500fffff
[ 25.260366] PCI: Bridge: 0000:00:1e.0
[ 25.260368] IO window: disabled.
[ 25.260372] MEM window: e0000000-e2ffffff
[ 25.260375] PREFETCH window: d0000000-dfffffff
[ 25.260385] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 25.260402] NET: Registered protocol family 2
[ 25.269888] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 25.270255] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 25.271729] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 25.272478] TCP: Hash tables configured (established 131072 bind 65536)
[ 25.272481] TCP reno registered
[ 25.274871] checking if image is initramfs... it is
[ 25.557129] Freeing initrd memory: 3630k freed
[ 25.557552] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 25.557555] apm: overridden by ACPI.
[ 25.557974] audit: initializing netlink socket (disabled)
[ 25.557991] audit(1201539012.570:1): initialized
[ 25.558127] highmem bounce pool size: 64 pages
[ 25.558131] Total HugeTLB memory allocated, 0
[ 25.560861] SELinux: Registering netfilter hooks
[ 25.560998] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 25.561002] io scheduler noop registered
[ 25.561004] io scheduler anticipatory registered
[ 25.561007] io scheduler deadline registered
[ 25.561018] io scheduler cfq registered (default)
[ 25.582401] Boot video device is 0000:02:00.0
[ 25.587554] ACPI: Thermal Zone [THRM] (52 C)
[ 25.587569] isapnp: Scanning for PnP cards...
[ 25.760206] Switched to high resolution mode on CPU 0
[ 25.944487] isapnp: No Plug & Play device found
[ 25.947347] Real Time Clock Driver v1.12ac
[ 25.947500] Non-volatile memory driver v1.2
[ 25.947503] Linux agpgart interface v0.102
[ 25.947560] agpgart: Detected NVIDIA nForce2 chipset
[ 25.963439] agpgart: AGP aperture is 256M @ 0xc0000000
[ 25.963465] Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled
[ 25.963614] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.963753] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 25.964066] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 25.964249] 00:0b: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 25.965135] RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
[ 25.965395] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 25.965399] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 25.965772] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 25.965847] mice: PS/2 mouse device common for all mice
[ 25.986718] input: AT Translated Set 2 keyboard as /class/input/input0
[ 25.989187] EDAC MC: Ver: 2.1.0 Jan 24 2008
[ 25.989315] cpuidle: using governor ladder
[ 25.989317] cpuidle: using governor menu
[ 25.989396] usbcore: registered new interface driver hiddev
[ 25.989433] usbcore: registered new interface driver usbhid
[ 25.989437] drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 25.989511] TCP cubic registered
[ 25.989513] Initializing XFRM netlink socket
[ 25.989589] NET: Registered protocol family 1
[ 25.989605] NET: Registered protocol family 17
[ 25.989612] Using IPI No-Shortcut mode
[ 25.989626] registered taskstats version 1
[ 25.989754] Magic number: 8:557:844
[ 25.990071] Freeing unused kernel memory: 240k freed
[ 25.990110] Write protecting the kernel text: 1952k
[ 25.990123] Write protecting the kernel read-only data: 772k
[ 26.282400] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 26.282409] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 22 (level, high) -> IRQ 16
[ 26.282422] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 26.282425] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 26.282518] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 26.282557] ehci_hcd 0000:00:02.2: debug port 1
[ 26.282563] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 26.282574] ehci_hcd 0000:00:02.2: irq 16, io mem 0xe7005000
[ 26.287965] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.288090] usb usb1: configuration #1 chosen from 1 choice
[ 26.288118] hub 1-0:1.0: USB hub found
[ 26.288129] hub 1-0:1.0: 6 ports detected
[ 26.394914] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 26.395326] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[ 26.395334] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21 (level, high) -> IRQ 17
[ 26.395348] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 26.395352] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 26.395426] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 26.395444] ohci_hcd 0000:00:02.0: irq 17, io mem 0xe7003000
[ 26.447950] usb usb2: configuration #1 chosen from 1 choice
[ 26.447977] hub 2-0:1.0: USB hub found
[ 26.447989] hub 2-0:1.0: 3 ports detected
[ 26.549147] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[ 26.549151] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20 (level, high) -> IRQ 18
[ 26.549159] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 26.549163] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 26.549217] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 26.549230] ohci_hcd 0000:00:02.1: irq 18, io mem 0xe7004000
[ 26.594755] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 26.601832] usb usb3: configuration #1 chosen from 1 choice
[ 26.601856] hub 3-0:1.0: USB hub found
[ 26.601866] hub 3-0:1.0: 3 ports detected
[ 26.708712] USB Universal Host Controller Interface driver v3.0
[ 26.709142] usb 1-1: configuration #1 chosen from 1 choice
[ 26.709206] hub 1-1:1.0: USB hub found
[ 26.709309] hub 1-1:1.0: 4 ports detected
[ 26.767866] SCSI subsystem initialized
[ 26.786664] Driver 'sd' needs updating - please use bus_type methods
[ 26.804629] libata version 3.00 loaded.
[ 26.810772] pata_amd 0000:00:09.0: version 0.3.10
[ 26.810934] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 26.811069] scsi0 : pata_amd
[ 26.816599] scsi1 : pata_amd
[ 26.817343] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 26.817347] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 26.972040] ata1.00: ATA-6: WDC WD2000JB-00EVA0, 15.05R15, max UDMA/100
[ 26.972044] ata1.00: 390721968 sectors, multi 16: LBA48
[ 26.978917] ata1.00: configured for UDMA/100
[ 27.302587] ata2.00: ATAPI: LITE-ON DVDRW SHM-165H6S, HS06, max UDMA/66
[ 27.346091] ata2.01: ATA-7: MAXTOR STM3320620A, 3.AAE, max UDMA/100
[ 27.346094] ata2.01: 625142448 sectors, multi 16: LBA48
[ 27.346103] ata2.00: limited to UDMA/33 due to 40-wire cable
[ 27.519360] ata2.00: configured for UDMA/33
[ 27.554043] ata2.01: configured for UDMA/100
[ 27.554146] scsi 0:0:0:0: Direct-Access ATA WDC WD2000JB-00E 15.0 PQ: 0 ANSI: 5
[ 27.554222] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 27.554236] sd 0:0:0:0: [sda] Write Protect is off
[ 27.554239] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.554259] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.554310] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 27.554321] sd 0:0:0:0: [sda] Write Protect is off
[ 27.554324] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 27.554343] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.554347] sda: sda1 sda2
[ 27.576777] sd 0:0:0:0: [sda] Attached SCSI disk
[ 27.577661] scsi 1:0:0:0: CD-ROM LITE-ON DVDRW SHM-165H6S HS06 PQ: 0 ANSI: 5
[ 27.577772] scsi 1:0:1:0: Direct-Access ATA MAXTOR STM332062 3.AA PQ: 0 ANSI: 5
[ 27.577837] sd 1:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 27.577849] sd 1:0:1:0: [sdb] Write Protect is off
[ 27.577852] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 27.577871] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.577920] sd 1:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 27.577932] sd 1:0:1:0: [sdb] Write Protect is off
[ 27.577934] sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 27.577953] sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 27.577956] sdb:<6>usb 2-2: new full speed USB device using ohci_hcd and address 2
[ 27.601964] sdb1 sdb2 sdb3
[ 27.602376] sd 1:0:1:0: [sdb] Attached SCSI disk
[ 27.744716] usb 2-2: configuration #1 chosen from 1 choice
[ 27.963802] usb 2-3: new low speed USB device using ohci_hcd and address 3
[ 28.127327] usb 2-3: configuration #1 chosen from 1 choice
[ 28.142509] input: Chicony Saitek Eclipse II Keyboard as /class/input/input1
[ 28.146698] input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:02.0-3
[ 28.175283] input: Chicony Saitek Eclipse II Keyboard as /class/input/input2
[ 28.178705] input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:02.0-3
[ 28.395503] usb 3-3: new full speed USB device using ohci_hcd and address 2
[ 28.530990] usb 3-3: configuration #1 chosen from 1 choice
[ 28.533944] hub 3-3:1.0: USB hub found
[ 28.536917] hub 3-3:1.0: 4 ports detected
[ 28.832282] usb 1-1.1: new low speed USB device using ehci_hcd and address 6
[ 29.020294] usb 1-1.1: configuration #1 chosen from 1 choice
[ 29.782033] hiddev97hidraw2: USB HID v1.11 Device [Belkin Belkin UPS] on usb-0000:00:02.2-1.1
[ 29.959457] usb 1-1.2: new full speed USB device using ehci_hcd and address 7
[ 30.052190] usb 1-1.2: configuration #1 chosen from 1 choice
[ 30.128397] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@xxxxxxxxxx
[ 30.152335] sata_sil 0000:01:0a.0: version 2.3
[ 30.152614] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[ 30.152622] ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 19
[ 30.158281] scsi2 : sata_sil
[ 30.158336] scsi3 : sata_sil
[ 30.158370] ata3: SATA max UDMA/100 mmio m512@0xe6004000 tf 0xe6004080 irq 19
[ 30.158375] ata4: SATA max UDMA/100 mmio m512@0xe6004000 tf 0xe60040c0 irq 19
[ 30.233321] usb 1-1.4: new high speed USB device using ehci_hcd and address 8
[ 30.318569] usb 1-1.4: configuration #1 chosen from 1 choice
[ 30.318637] hub 1-1.4:1.0: USB hub found
[ 30.318738] hub 1-1.4:1.0: 4 ports detected
[ 30.461079] ata3: SATA link down (SStatus 0 SControl 310)
[ 30.608087] usb 1-1.4.3: new low speed USB device using ehci_hcd and address 9
[ 30.699939] usb 1-1.4.3: configuration #1 chosen from 1 choice
[ 30.704245] input: Logitech USB Receiver as /class/input/input3
[ 30.707939] input,hidraw3: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:02.2-1.4.3
[ 30.884824] usb 1-1.4.4: new full speed USB device using ehci_hcd and address 10
[ 30.914779] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 30.918331] ata4.00: ATA-7: Hitachi HDT725040VLA360, V5COA7EA, max UDMA/133
[ 30.918335] ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 30.924331] ata4.00: configured for UDMA/100
[ 30.924446] scsi 3:0:0:0: Direct-Access ATA Hitachi HDT72504 V5CO PQ: 0 ANSI: 5
[ 30.924527] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
[ 30.924542] sd 3:0:0:0: [sdc] Write Protect is off
[ 30.924545] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 30.924564] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.924616] sd 3:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB)
[ 30.924628] sd 3:0:0:0: [sdc] Write Protect is off
[ 30.924630] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 30.924649] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 30.924653] sdc: sdc1
[ 30.937391] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 30.971195] usb 1-1.4.4: configuration #1 chosen from 1 choice
[ 33.938587] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 33.938592] EXT3-fs: write access will be enabled during recovery.
[ 38.878587] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 38.878643] ata1.00: BMDMA stat 0x65
[ 38.878694] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in
[ 38.878695] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 38.878746] ata1.00: status: { DRDY ERR }
[ 38.878792] ata1.00: error: { UNC }
[ 38.905598] ata1.00: configured for UDMA/100
[ 38.905606] ata1: EH complete
[ 40.923221] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 40.923271] ata1.00: BMDMA stat 0x65
[ 40.923320] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in
[ 40.923322] res 51/40:00:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 40.923372] ata1.00: status: { DRDY ERR }
[ 40.923495] ata1.00: error: { UNC }
[ 40.950180] ata1.00: configured for UDMA/100
[ 40.950185] ata1: EH complete
[ 42.967882] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 42.968008] ata1.00: BMDMA stat 0x65
[ 42.968134] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in
[ 42.968135] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 42.968340] ata1.00: status: { DRDY ERR }
[ 42.968464] ata1.00: error: { UNC }
[ 42.979747] ata1.00: configured for UDMA/100
[ 42.979752] ata1: EH complete
[ 44.995973] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 44.996102] ata1.00: BMDMA stat 0x65
[ 44.996227] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in
[ 44.996229] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 44.996432] ata1.00: status: { DRDY ERR }
[ 44.996554] ata1.00: error: { UNC }
[ 45.023334] ata1.00: configured for UDMA/100
[ 45.023339] ata1: EH complete
[ 47.098786] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 47.098913] ata1.00: BMDMA stat 0x65
[ 47.099038] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in
[ 47.099040] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 47.099244] ata1.00: status: { DRDY ERR }
[ 47.099366] ata1.00: error: { UNC }
[ 47.110882] ata1.00: configured for UDMA/100
[ 47.110887] ata1: EH complete
[ 49.276447] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 49.276573] ata1.00: BMDMA stat 0x65
[ 49.276698] ata1.00: cmd c8/00:f8:59:3d:07/00:00:00:00:00/e0 tag 0 dma 126976 in
[ 49.276699] res 51/40:f8:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 49.276903] ata1.00: status: { DRDY ERR }
[ 49.277028] ata1.00: error: { UNC }
[ 49.288365] ata1.00: configured for UDMA/100
[ 49.288377] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
[ 49.288381] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
[ 49.288385] Descriptor sense data with sense descriptors (in hex):
[ 49.288387] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 49.288393] 00 07 3d 8b
[ 49.288396] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4
[ 49.288399] end_request: I/O error, dev sda, sector 474507
[ 49.288415] ata1: EH complete
[ 49.297395] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 49.299276] sd 0:0:0:0: [sda] Write Protect is off
[ 49.299280] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 49.303585] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 49.306616] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 49.317409] sd 0:0:0:0: [sda] Write Protect is off
[ 49.317412] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 49.320830] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 53.606855] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 53.606989] ata1.00: BMDMA stat 0x65
[ 53.607118] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in
[ 53.607120] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 53.607324] ata1.00: status: { DRDY ERR }
[ 53.607446] ata1.00: error: { UNC }
[ 53.634393] ata1.00: configured for UDMA/100
[ 53.634401] ata1: EH complete
[ 55.651542] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 55.651672] ata1.00: BMDMA stat 0x65
[ 55.651797] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in
[ 55.651799] res 51/40:00:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 55.652002] ata1.00: status: { DRDY ERR }
[ 55.652125] ata1.00: error: { UNC }
[ 55.678936] ata1.00: configured for UDMA/100
[ 55.678941] ata1: EH complete
[ 57.845829] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 57.845956] ata1.00: BMDMA stat 0x65
[ 57.846084] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in
[ 57.846086] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 57.846289] ata1.00: status: { DRDY ERR }
[ 57.846411] ata1.00: error: { UNC }
[ 57.857425] ata1.00: configured for UDMA/100
[ 57.857430] ata1: EH complete
[ 59.915393] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 59.915521] ata1.00: BMDMA stat 0x65
[ 59.915649] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in
[ 59.915650] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 59.915854] ata1.00: status: { DRDY ERR }
[ 59.915976] ata1.00: error: { UNC }
[ 59.926980] ata1.00: configured for UDMA/100
[ 59.926985] ata1: EH complete
[ 61.993309] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 61.993436] ata1.00: BMDMA stat 0x65
[ 61.993561] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in
[ 61.993563] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 61.993766] ata1.00: status: { DRDY ERR }
[ 61.993888] ata1.00: error: { UNC }
[ 62.020550] ata1.00: configured for UDMA/100
[ 62.020555] ata1: EH complete
[ 64.037975] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 64.038102] ata1.00: BMDMA stat 0x65
[ 64.038227] ata1.00: cmd c8/00:58:89:3d:07/00:00:00:00:00/e0 tag 0 dma 45056 in
[ 64.038229] res 51/40:58:8b:3d:07/00:00:00:00:00/e0 Emask 0x9 (media error)
[ 64.038432] ata1.00: status: { DRDY ERR }
[ 64.038555] ata1.00: error: { UNC }
[ 64.050125] ata1.00: configured for UDMA/100
[ 64.050134] sd 0:0:0:0: [sda] Result: hostbyte=0x00 driverbyte=0x08
[ 64.050138] sd 0:0:0:0: [sda] Sense Key : 0x3 [current] [descriptor]
[ 64.050142] Descriptor sense data with sense descriptors (in hex):
[ 64.050143] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00
[ 64.050149] 00 07 3d 8b
[ 64.050152] sd 0:0:0:0: [sda] ASC=0x11 ASCQ=0x4
[ 64.050155] end_request: I/O error, dev sda, sector 474507
[ 64.050169] ata1: EH complete
[ 64.050382] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 64.050506] sd 0:0:0:0: [sda] Write Protect is off
[ 64.050509] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 64.050756] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.051049] sd 0:0:0:0: [sda] 390721968 512-byte hardware sectors (200050 MB)
[ 64.051173] sd 0:0:0:0: [sda] Write Protect is off
[ 64.051176] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 64.051422] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 64.632360] kjournald starting. Commit interval 5 seconds
[ 64.632378] EXT3-fs: dm-0: orphan cleanup on readonly fs
[ 64.632385] ext3_orphan_cleanup: deleting unreferenced inode 17303473
[ 64.648547] ext3_orphan_cleanup: deleting unreferenced inode 38797436
[ 64.707760] ext3_orphan_cleanup: deleting unreferenced inode 37519565
[ 64.730253] EXT3-fs: dm-0: 3 orphan inodes deleted
[ 64.730255] EXT3-fs: recovery complete.
[ 64.816010] EXT3-fs: mounted filesystem with ordered data mode.
[ 65.194899] audit(1201539052.235:2): enforcing=1 old_enforcing=0 auid=4294967295
[ 65.408684] SELinux:8192 avtab hash slots allocated.Num of rules:213166
[ 65.470766] SELinux:8192 avtab hash slots allocated.Num of rules:213166
[ 65.534876] security: 8 users, 11 roles, 2363 types, 114 bools, 1 sens, 1024 cats
[ 65.534881] security: 67 classes, 213166 rules
[ 65.537006] SELinux: Completing initialization.
[ 65.537009] SELinux: Setting up existing superblocks.
[ 65.559377] SELinux: initialized (dev dm-0, type ext3), uses xattr
[ 65.720901] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
[ 65.720917] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 65.721020] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 65.721032] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 65.721064] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 65.721073] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
[ 65.721079] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 65.721090] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
[ 65.721094] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 65.721102] SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
[ 65.721109] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 65.721113] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 65.721118] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 65.721128] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 65.721140] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 65.721145] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 65.721169] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 65.725436] SELinux: policy loaded with handle_unknown=allow
[ 65.725446] audit(1201539052.766:3): policy loaded auid=4294967295
[ 69.515151] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 69.515177] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 69.515202] sd 1:0:1:0: Attached scsi generic sg2 type 0
[ 69.515231] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 70.057084] input: Power Button (FF) as /class/input/input4
[ 70.060611] ACPI: Power Button (FF) [PWRF]
[ 70.060653] ACPI Error (evxfevnt-0186): Could not enable SleepButton event [20070126]
[ 70.060658] ACPI Warning (evxface-0145): Could not enable fixed event 3 [20070126]
[ 70.060742] input: Power Button (CM) as /class/input/input5
[ 70.064592] ACPI: Power Button (CM) [PWRB]
[ 70.064652] input: Sleep Button (CM) as /class/input/input6
[ 70.067603] ACPI: Sleep Button (CM) [SLPB]
[ 70.385057] usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04B8 pid 0x0005
[ 70.385082] usbcore: registered new interface driver usblp
[ 70.412471] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x5000
[ 70.412498] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x5100
[ 70.450007] usbcore: registered new interface driver usbserial
[ 70.450013] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 70.569319] drivers/usb/serial/usb-serial.c: USB Serial support registered for FTDI USB Serial Device
[ 70.569461] ftdi_sio 1-1.2:1.0: FTDI USB Serial Device converter detected
[ 70.569497] drivers/usb/serial/ftdi_sio.c: Detected FT232RL
[ 70.569536] usb 1-1.2: FTDI USB Serial Device converter now attached to ttyUSB0
[ 70.569552] usbcore: registered new interface driver ftdi_sio
[ 70.569555] drivers/usb/serial/ftdi_sio.c: v1.4.3:USB FTDI Serial Converters Driver
[ 70.615332] input: PC Speaker as /class/input/input7
[ 70.661362] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 70.661752] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 70.661757] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22 (level, high) -> IRQ 16
[ 70.661764] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 70.719617] Floppy drive(s): fd0 is 1.44M
[ 70.736319] FDC 0 is a post-1991 82077
[ 71.173281] forcedeth 0000:00:04.0: ifname eth0, PHY OUI 0x20 @ 1, addr 00:04:4b:5d:eb:7d
[ 71.173286] forcedeth 0000:00:04.0: timirq lnktim desc-v1
[ 71.173697] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 71.173705] ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
[ 71.206469] Linux video capture interface: v2.00
[ 71.231784] firewire_ohci: Added fw-ohci device 0000:01:09.0, OHCI version 1.10
[ 71.475562] nvidia: module license 'NVIDIA' taints kernel.
[ 71.733592] firewire_core: created new fw device fw0 (0 config rom retries, S400)
[ 71.738694] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19 (level, high) -> IRQ 20
[ 71.739120] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.07 Thu Dec 13 18:42:56 PST 2007
[ 72.053875] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded
[ 72.053971] cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected]
[ 72.053975] cx88[0]: TV tuner type 60, Radio tuner type -1
[ 72.093539] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
[ 72.198076] cx88[0]/2: cx2388x 8802 Driver Manager
[ 72.200230] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 72.200241] ACPI: PCI Interrupt 0000:01:07.2[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 21
[ 72.200254] cx88[0]/2: found at 0000:01:07.2, rev: 5, irq: 21, latency: 32, mmio: 0xe4000000
[ 72.200328] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17 (level, high) -> IRQ 21
[ 72.200340] cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 21, latency: 32, mmio: 0xe3000000
[ 72.379427] tda8290_probe: not probed - driver disabled by Kconfig
[ 72.379432] tuner 2-0043: chip found @ 0x86 (cx88[0])
[ 72.379457] tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
[ 72.379460] tuner 2-0043: type set to tda9887
[ 72.381847] tuner 2-0061: chip found @ 0xc2 (cx88[0])
[ 72.381866] tuner-simple 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
[ 72.381869] tuner 2-0061: type set to Thomson DTT 761X (A
[ 72.381871] tuner-simple 2-0061: type set to 60 (Thomson DTT 761X (ATSC/NTSC))
[ 72.381874] tuner 2-0061: type set to Thomson DTT 761X (A
[ 72.394034] cx88[0]/0: registered device video0 [v4l2]
[ 72.394059] cx88[0]/0: registered device vbi0
[ 72.394083] cx88[0]/0: registered device radio0
[ 72.528367] cx88/2: cx2388x dvb driver version 0.0.6 loaded
[ 72.528372] cx88/2: registering cx8802 driver, type: dvb access: shared
[ 72.528376] cx88[0]/2: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22]
[ 72.528380] cx88[0]/2: cx2388x based DVB/ATSC card
[ 72.581302] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 72.581312] ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [APC3] -> GSI 18 (level, high) -> IRQ 22
[ 72.586129] Audigy2 value: Special config.
[ 72.695526] DVB: registering new adapter (cx88[0])
[ 72.695532] DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)...
[ 72.769048] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[ 72.769054] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21 (level, high) -> IRQ 17
[ 72.769090] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 73.080499] intel8x0_measure_ac97_clock: measured 50742 usecs
[ 73.080504] intel8x0: clocking to 47447
[ 75.947132] EXT3 FS on dm-0, internal journal
[ 76.213561] kjournald starting. Commit interval 5 seconds
[ 76.220513] EXT3 FS on sda1, internal journal
[ 76.220518] EXT3-fs: mounted filesystem with ordered data mode.
[ 76.226324] SELinux: initialized (dev sda1, type ext3), uses xattr
[ 76.226733] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 76.231140] kjournald starting. Commit interval 5 seconds
[ 76.238465] EXT3 FS on sdc1, internal journal
[ 76.238469] EXT3-fs: mounted filesystem with ordered data mode.
[ 76.245352] SELinux: initialized (dev sdc1, type ext3), uses xattr
[ 77.211706] Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k
[ 77.215361] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
[ 77.624868] warning: process `kudzu' used the deprecated sysctl system call with 1.23.
[ 78.115621] NET: Registered protocol family 10
[ 78.115859] lo: Disabled Privacy Extensions
[ 83.732476] RPC: Registered udp transport module.
[ 83.732480] RPC: Registered tcp transport module.
[ 83.735747] SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
[ 84.406333] w83627hf: Found W83627HF chip at 0x290
[ 84.927130] audit(1201539072.923:4): audit_pid=1915 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
[ 86.877546] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 87.346561] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 87.501848] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 89.296245] eth0: no IPv6 routers present
[ 129.766842] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[ 129.766858] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 129.766929] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
