>-----Original Message----- >From: Jeff Garzik [mailto:jgarzik@xxxxxxxxx] >Sent: Tuesday, January 29, 2008 9:14 AM >To: Gaston, Jason D >Cc: linux-ide@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; >htejun@xxxxxxxxx >Subject: Re: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 >DeviceID's > >Jason Gaston wrote: >> This patch adds the Intel ICH10 IDE mode SATA Controller DeviceID's. >> >> Signed-off-by: Jason Gaston <jason.d.gaston@xxxxxxxxx> >> >> --- linux-2.6.24/drivers/ata/ata_piix.c.orig 2008-01-24 >14:58:37.000000000 -0800 >> +++ linux-2.6.24/drivers/ata/ata_piix.c 2008-01-28 14:58:22.000000000 - >0800 >> @@ -263,6 +263,14 @@ >> { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, >> /* SATA Controller IDE (Tolapai) */ >> { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci }, >> + /* SATA Controller IDE (ICH10) */ >> + { 0x8086, 0x3a00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, >> + /* SATA Controller IDE (ICH10) */ >> + { 0x8086, 0x3a06, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, >> + /* SATA Controller IDE (ICH10) */ >> + { 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, >> + /* SATA Controller IDE (ICH10) */ >> + { 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, > >can these do AHCI mode without losing any PATA ports? > >if so, I would prefer to always drive the hardware in AHCI mode, if it >is capable of doing so. They do not have PATA. Jason - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
