Thomas Evans wrote: > Tejun and all - > > I have a new log - I got somewhat further by setting this bit when > init'd via HOST_CTRL: > > Bit [28]: PERR Rpt Dsbl (R/W) – PERR Report Disable. This bit, when set > to one, disables reporting of PCI bus > parity errors to the Command Execution State Machine (such errors would > otherwise cause the state machine to stop > and report an error in the Command Error register). Hmmm... That's strange. If PERR makes a difference, it means PCI bus side is contributing to the problem but only when PMP is attached while directly attached drive works just fine? > This causes the PMP device to be noticed, but the first qc command never > completes. > > Please see the log and see if there is anything obvious. Thanks but I'm as lost as you are. :-( -- tejun - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
