Remove some obsolete comments, and bump up the driver version number. Signed-off-by: Mark Lord <mlord@xxxxxxxxx> --- old/drivers/ata/sata_mv.c 2008-01-26 11:05:54.000000000 -0500 +++ new/drivers/ata/sata_mv.c 2008-01-26 11:12:32.000000000 -0500 @@ -29,7 +29,13 @@ I distinctly remember a couple workarounds (one related to PCI-X) are still needed. - 4) Add NCQ support (easy to intermediate, once new-EH support appears) + 2) Improve/fix IRQ and error handling sequences. + + 3) ATAPI support (Marvell claims the 60xx/70xx chips can do it). + + 4) Think about TCQ support here, and for libata in general + with controllers that suppport it via host-queuing hardware + (a software-only implementation could be a nightmare). 5) Investigate problems with PCI Message Signalled Interrupts (MSI). @@ -53,8 +59,6 @@ Target mode, for those without docs, is the ability to directly connect two SATA controllers. - 13) Verify that 7042 is fully supported. I only have a 6042. - */ @@ -73,7 +77,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.01" +#define DRV_VERSION "1.20" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html