From: Borislav Petkov <bbpetkov@xxxxxxxx>
... by adding a new typedef function pointer idetape_io_buf in order to call
the proper buffer i/o handler depending on the data direction.
Signed-off-by: Borislav Petkov <bbpetkov@xxxxxxxx>
---
drivers/ide/ide-tape.c | 54 +++++++++++++++++++++++++----------------------
1 files changed, 29 insertions(+), 25 deletions(-)
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index eab552e..041edcd 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -1090,18 +1090,22 @@ static void idetape_postpone_request (ide_drive_t *drive)
}
/*
- * idetape_pc_intr is the usual interrupt handler which will be called
- * during a packet command. We will transfer some of the data (as
- * requested by the drive) and will re-point interrupt handler to us.
- * When data transfer is finished, we will act according to the
- * algorithm described before idetape_issue_packet_command.
- *
+ * This is the usual interrupt handler which will be called during a packet
+ * command. We will transfer some of the data (as requested by the drive) and
+ * will re-point interrupt handler to us. When data transfer is finished, we
+ * will act according to the algorithm described before
+ * idetape_issue_packet_command.
*/
-static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
+
+typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, uint);
+
+static ide_startstop_t idetape_pc_intr(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
idetape_tape_t *tape = drive->driver_data;
idetape_pc_t *pc = tape->pc;
+ xfer_func_t *xferfunc;
+ idetape_io_buf *iobuf;
unsigned int temp;
#if SIMULATE_ERRORS
static int error_sim_count = 0;
@@ -1171,7 +1175,8 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
debug_log(DBG_ERR, "%s: I/O error\n", tape->name);
if (pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: I/O error in request sense command\n");
+ printk(KERN_ERR "ide-tape: I/O error in request"
+ " sense command\n");
return ide_do_reset(drive);
}
debug_log(DBG_ERR, "[cmd %x]: check condition\n",
@@ -1210,7 +1215,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
ireason = hwif->INB(IDE_IREASON_REG);
if (ireason & CD) {
- printk(KERN_ERR "ide-tape: CoD != 0 in idetape_pc_intr\n");
+ printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__);
return ide_do_reset(drive);
}
if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) {
@@ -1226,31 +1231,30 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive)
temp = pc->xferred + bcount;
if (temp > pc->rq_xfer) {
if (temp > pc->buf_size) {
- printk(KERN_ERR "ide-tape: The tape wants to send us more data than expected - discarding data\n");
+ printk(KERN_ERR "ide-tape: The tape wants to "
+ "send us more data than "
+ "expected - discarding data\n");
idetape_discard_data(drive, bcount);
- ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL);
+ ide_set_handler(drive, &idetape_pc_intr,
+ IDETAPE_WAIT_CMD, NULL);
return ide_started;
}
debug_log(DBG_SENSE, "The tape wants to send us more "
"data than expected - allowing transfer\n");
}
- }
- if (test_bit(PC_WRITING, &pc->flags)) {
- if (pc->bh != NULL)
- idetape_output_buffers(drive, pc, bcount);
- else
- /* Write the current buffer */
- hwif->atapi_output_bytes(drive, pc->cur_pos,
- bcount);
+ iobuf = &idetape_input_buffers;
+ xferfunc = hwif->atapi_input_bytes;
} else {
- if (pc->bh != NULL)
- idetape_input_buffers(drive, pc, bcount);
- else
- /* Read the current buffer */
- hwif->atapi_input_bytes(drive, pc->cur_pos,
- bcount);
+ iobuf = &idetape_output_buffers;
+ xferfunc = hwif->atapi_output_bytes;
}
+
+ if (pc->bh)
+ iobuf(drive, pc, bcount);
+ else
+ xferfunc(drive, pc->cur_pos, bcount);
+
/* Update the current position */
pc->xferred += bcount;
pc->cur_pos += bcount;
--
1.5.3.7
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
