On Tue, 29 Jan 2008, Gene Heskett wrote: > >For starters, enable CONFIG_BLK_DEV_SR. > > That could stand to be moved or renamed, it is well buried in the menu for the > REAL scsi stuffs, which I don't have any of. Enabled & building now. The "SCSI support type (disk, tape, CD-ROM)" section of that menu actually applies to all ATA-command-set devices that don't use the old IDE code. For example, usb-storage uses "SCSI disk" out of that section, and I've only seen "Probe all LUNs on each SCSI device" be needed for a particular USB card reader with two slots. At this point, most of the things in the kernel that refer to SCSI probably should say "storage" (or "ATA", really, but that would make the acronyms confusing). Incidentally, you should be able to save debugging time for problems like missing "sr" by building it as a module, which will build really quickly and not require a reboot to test. -Daniel *This .sig left intentionally blank* - To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html