Re: DMA mapping on SCSI device?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



--- On Mon, 1/28/08, Robert Hancock <hancockr@xxxxxxx> wrote:
> The trick is that if an ATAPI device is connected, we (as
> far as I'm 
> aware) can't use ADMA mode, so we have to switch that
> port into legacy 
> mode.

Can you double check this with the HW architect of the
HW DMA engine of the ASIC?

> This means it's only capable of 32-bit DMA.
> However the other port 
> on the controller may be connected to a hard drive and
> therefore still 
> capable of 64-bit DMA.

If this is indeed the case as you've presented it here,
it sounds like a HW shortcoming.  I cannot see how the device
type (or protocol) dictate how the DMA engine operates.
They live in two different domains.

> The ideal solution would be to do mapping against a
> different struct 
> device for each port, so that we could maintain the proper
> DMA mask for 
> each of them at all times. However I'm not sure if
> that's possible. The 
> thought of using the SCSI struct device for DMA mapping was
> brought up 
> at one point.. any thoughts on that?

The reason for this is that the object that a struct scsi_dev
represents has nothing to do with HW DMA engines.

It looks like your current solution is correct and
x86_64's blk_queue_bounce_limit needs work.

    Luben

-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux