Linux IDE Archive

• Thread Index

• [PATCH 2/3] block layer varlen-cdb
  • From: Boaz Harrosh
• Subject: [PATCH 1/3] Let scsi_cmnd->cmnd use request->cmd buffer
  • From: Boaz Harrosh
• [PATCHSET 0/3] varlen extended and vendor-specific cdbs
  • From: Boaz Harrosh
• Re: [PATCH] ide: introduce CONFIG_BLK_DEV_IDEDMA_SFF option
  • From: Bartlomiej Zolnierkiewicz
• Current qc_defer implementation may lead to infinite recursion
  • From: Elias Oltmanns
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Atsushi Nemoto
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Boaz Harrosh
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Christoph Hellwig
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: James Bottomley
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Bartlomiej Zolnierkiewicz
• Re: ide/arm/bast-ide.c compile error
  • From: Russell King
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Christoph Hellwig
• 2.6.24 found 5 exceptions in dmesg after not using the system for while
  • From: Andrew Paprocki
• [PATCH] scsi: ses fix mem leaking when fail to add intf
  • From: Yinghai Lu
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] scsi: ses fix for len and mem leaking when fail to add intf
  • From: Yinghai Lu
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Sebastian Siewior
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ide-tape: remove atomic test/set macros for packet commands
  • From: Borislav Petkov
• [PATCH 1/2] ide-tape: move all struct and other defs at the top
  • From: Borislav Petkov
• Current git --> kaboom [bisect] seems IDE related.
  • From: Sebastian Siewior
• Re: Linux 2.6.24.1 - kernel does not boot; IRQ trouble?
  • From: Chris Rankin
• Re: Linux 2.6.24.1 - kernel does not boot; IRQ trouble?
  • From: Oliver Pinter
• Re: Linux 2.6.24.1 - kernel does not boot; IRQ trouble?
  • From: Chris Rankin
• Re: [PATCH 07/18] ide: factor out devices init from ide_init_port_data()
  • From: Sergei Shtylyov
• Re: [PATCH 06/18] ide: factor out code unregistering devices from ide_unregister()
  • From: Sergei Shtylyov
• Re: ide/arm/bast-ide.c compile error
  • From: Sergei Shtylyov
• Re: [PATCH 1/3] ide-tape: remove never executed code
  • From: Sergei Shtylyov
• Re: ide/arm/bast-ide.c compile error
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: remove ->hold field from ide_hwif_t (take 2)
  • From: Sergei Shtylyov
• [PATCH] ide: remove ->hold field from ide_hwif_t (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: introduce CONFIG_BLK_DEV_IDEDMA_SFF option
  • From: Sergei Shtylyov
• Re: ide-tape redux (was: Re:)
  • From: Bartlomiej Zolnierkiewicz
• Re: ide-tape redux (was: Re:)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/3] ide: remove IDE_*_REG macros
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] ide: add ide_atapi_{discard_data,write_zeros} inline helpers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] ide-tape: remove never executed code
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-floppy: remove struct idefloppy_id_gcw
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] scsi: ses fix for len and mem leaking when fail to add intf
  • From: James Bottomley
• [Bug 9921] Problem burning DVDs with Marvell 88SE6121 on pata_marvell
  • From: bugme-daemon
• [PATCH] scsi: ses fix for len and mem leaking when fail to add intf
  • From: Yinghai Lu
• [PATCH] ide-floppy: remove struct idefloppy_id_gcw
  • From: Borislav Petkov
• [Bug 9921] New: Problem burning DVDs with Marvell 88SE6121 on pata_marvell
  • From: bugme-daemon
• Re: [PATCH 4/9] libata: normalize port_info, port_operations and sht tables
  • From: Tejun Heo
• Re: [PATCH 4/9] libata: normalize port_info, port_operations and sht tables
  • From: Tejun Heo
• Re: [PATCH 7/9] libata: stop overloading port_info->private_data
  • From: Tejun Heo
• Re: [PATCH 4/9] libata: normalize port_info, port_operations and sht tables
  • From: Tejun Heo
• Re: [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations
  • From: Tejun Heo
• [PATCH 6/7] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• [PATCH 7/7] libata: implement drain buffers
  • From: Tejun Heo
• [PATCH 5/7] block: clear drain buffer if draining for write command
  • From: Tejun Heo
• [PATCH 3/7] block: add request->raw_data_len
  • From: Tejun Heo
• [PATCH 1/7] libata: update ATAPI overflow draining
  • From: Tejun Heo
• [PATCH 4/7] block: implement request_queue->dma_drain_needed
  • From: Tejun Heo
• [PATCHSET #upstream] block/libata: update and use block layer padding and draining, take 2
  • From: Tejun Heo
• [PATCH 2/7] block: update bio according to DMA alignment padding
  • From: Tejun Heo
• Re: [PATCHSET #upstream] block/libata: update and use block layer padding and draining
  • From: Tejun Heo
• ide/arm/bast-ide.c compile error
  • From: Adrian Bunk
• Linux 2.6.24.1 - kernel does not boot; IRQ trouble?
  • From: Chris Rankin
• Re: current mainline ide doesn't like qemu/kvm (or vice versa)
  • From: Anthony Liguori
• Re: [PATCHSET #upstream] block/libata: update and use block layer padding and draining
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: fix loop with last port
  • From: Andrew Morton
• Re: [PATCHSET #upstream] block/libata: update and use block layer padding and draining
  • From: Jens Axboe
• Re: [2.6 patch] fix ide/legacy/gayle.c compilation
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cd: replace ntohs with generic byteorder macro be16_to_cpu
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET #upstream] block/libata: update and use block layer padding and draining
  • From: Jeff Garzik
• Re: [RFC] Introduce HAVE_IDE to support flexible IDE per arch configuration
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC] Introduce HAVE_IDE to support flexible IDE per arch configuration
  • From: Sam Ravnborg
• Re: [PATCH 3/3] palm_bk3710: factor out cable detection
  • From: Sergei Shtylyov
• Re: [PATCH 2.5/3] palm_bk3710: port initialization/probing bugfix
  • From: Sergei Shtylyov
• Re: [PATCH] pdc202xx_old: always enable burst mode
  • From: Sergei Shtylyov
• Re: [PATCH 02/18] ide: fix ide_find_port()
  • From: Sergei Shtylyov
• Re: [PATCH 08/18] ide: move ide_port_setup_devices() call to ide_device_add_all()
  • From: Sergei Shtylyov
• Re: [PATCH 05/18] ide: factor out cable detection from ide_init_port()
  • From: Sergei Shtylyov
• [PATCH] isolate and rework cable logic try 2
  • From: Alan Cox
• Re: [PATCH] libata: Cable strategy
  • From: Alan Cox
• Re: current mainline ide doesn't like qemu/kvm (or vice versa)
  • From: Alan Cox
• Re: [PATCH] libata: Cable strategy
  • From: Chuck Ebbert
• Re: [PATCH] pata_ninja32: setup changes
  • From: Sergei Shtylyov
• [PATCH] pata_ninja32: setup changes
  • From: Alan Cox
• [PATCH] pata_legacy: typo fix
  • From: Alan Cox
• [PATCH] pata_amd: Note in the module description it handles Nvidia
  • From: Alan Cox
• [PATCH] libata: Cable strategy
  • From: Alan Cox
• current mainline ide doesn't like qemu/kvm (or vice versa)
  • From: Christoph Hellwig
• Re: ST310211A and HPA ( was Re: Bug#401035: linux-image-2.6-686 - another misbehaving Seagate )
  • From: Mikko Rapeli
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Tejun Heo
• Re: [PATCH 0/7] blk_end_request: full I/O completion handler
  • From: Jens Axboe
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Benjamin Herrenschmidt
• [PATCH] ide-cd: replace ntohs with generic byteorder macro be16_to_cpu
  • From: Borislav Petkov
• RE: [PATCH 0/7] blk_end_request: full I/O completion handler
  • From: S, Chandrakala (STSD)
• Re: sata_mv: problems using it as a platform_driver
  • From: Mark Lord
• Re: sata_mv: problems using it as a platform_driver
  • From: Mark Lord
• Re: [PATCH] sata_mv: fix loop with last port
  • From: Mark Lord
• Re: falconide broken
  • From: Michael Schmitz
• Re: sata_mv: problems using it as a platform_driver
  • From: Byron Bradley
• sata_mv: problems using it as a platform_driver
  • From: Byron Bradley
• [PATCH 18/18] ide: remove ide_init_hwif_ports()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/18] ide: remove init_hwif_default()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/18] ide: remove ->hold field from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/18] ide: remove broken/dangerous HDIO_[UNREGISTER,SCAN]_HWIF ioctls
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/18] ide: remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/18] ide: remove CONFIG_BLK_DEV_HD_IDE config option
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/18] ide: remove needless CONFIG_BLK_DEV_HD hack from init_hwif()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/18] ide-generic: add ide_generic class and attribute for adding new interfaces
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/18] ide: add warm-plug support for IDE devices
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/18] ide: rework PowerMac media-bay support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/18] ide: move ide_port_setup_devices() call to ide_device_add_all()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/18] ide: factor out devices init from ide_init_port_data()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/18] ide: factor out code unregistering devices from ide_unregister()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/18] ide: factor out cable detection from ide_init_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/18] ide-acpi: add missing drive->acpidata zeroing
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/18] ide: use ide_find_port() instead of ide_deprecated_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/18] ide: fix ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/18] ide-generic: set hwif->chipset
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Bartlomiej Zolnierkiewicz
• [2.6 patch] fix ide/legacy/gayle.c compilation
  • From: Adrian Bunk
• [PATCH] sata_mv: fix loop with last port
  • From: Yinghai Lu
• Re: [RFC] Introduce HAVE_IDE to support flexible IDE per arch configuration
  • From: Russell King - ARM Linux
• [RFC] Introduce HAVE_IDE to support flexible IDE per arch configuration
  • From: Sam Ravnborg
• Re: ST310211A and HPA ( was Re: Bug#401035: linux-image-2.6-686 - another misbehaving Seagate )
  • From: Bart Champagne
• [PATCH] ide: remove stale version number
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] pdc202xx_old: always enable burst mode
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2.5/3] palm_bk3710: port initialization/probing bugfix
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3] palm_bk3710: factor out cable detection
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: insert BUG_ON() into __ide_set_handler() (take 2)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: insert BUG_ON() into __ide_set_handler() (take 2)
  • From: Sergei Shtylyov
• [PATCH] ide: insert BUG_ON() into __ide_set_handler()
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] palm_bk3710: factor out cable detection
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/5] ide: remove ide_setup_ports()
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] palm_bk3710: factor out cable detection
  • From: Sergei Shtylyov
• [PATCH 3/3] palm_bk3710: factor out cable detection
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] palm_bk3710: fix ide_unregister() usage
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] palm_bk3710: ide_register_hw() -> ide_device_add()
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.26-git0: IDE oops during boot
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/5] ide: remove redundant BUG_ON() from [atapi_]reset_pollfunc()
  • From: Sergei Shtylyov
• Re: 2.6.26-git0: IDE oops during boot
  • From: Kamalesh Babulal
• falconide broken
  • From: Geert Uytterhoeven
• Re: [Bugme-new] [Bug 9901] New: kernel panic in stex modules (?)
  • From: FUJITA Tomonori
• Re: [PATCH #upstream-fixes] pata_via: fix SATA cable detection on cx700
  • From: Alan Cox
• Re: [PATCH #upstream-fixes] libata: ignore deverr on SETXFER if mode is configured
  • From: Alan Cox
• [PATCH #upstream-fixes] libata: ignore deverr on SETXFER if mode is configured
  • From: Tejun Heo
• [PATCH #upstream-fixes] pata_via: fix SATA cable detection on cx700
  • From: Tejun Heo
• Re: [PATCH 3/4] libata: implement ATAPI drain buffer
  • From: Jeff Garzik
• Re: [PATCH 2/4] libata: update ATAPI overflow draining
  • From: Jeff Garzik
• Re: [PATCHSET #upstream] block/libata: update and use block layer padding and draining
  • From: Jeff Garzik
• Re: [PATCHSET #upstream] block/libata: update and use block layer padding and draining
  • From: James Bottomley
• Re: [PATCH] ide-core: remove conditional compiling with MODULE in ide-core.c
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: another possible ide panic fix for blk-end-request
  • From: Bartlomiej Zolnierkiewicz
• [Bug 9904] New: ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• Re: [PATCH 2/5] ide: remove redundant BUG_ON() from [atapi_]reset_pollfunc()
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.26-git0: IDE oops during boot
  • From: Bartlomiej Zolnierkiewicz
• Re: [Bugme-new] [Bug 9901] New: kernel panic in stex modules (?)
  • From: James Bottomley
• Re: [Bugme-new] [Bug 9901] New: kernel panic in stex modules (?)
  • From: Andrew Morton
• Re: [PATCH 2/5] ide: remove redundant BUG_ON() from [atapi_]reset_pollfunc()
  • From: Sergei Shtylyov
• Re: [PATCH 2/3 2.6.24-git] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Russell King - ARM Linux
• [git patches] libata updates
  • From: Jeff Garzik
• Re: [2.6 patch] ata_piix.c:piix_init_one() must be __devinit
  • From: Jeff Garzik
• Re: [PATCH] libata-core: unblacklist HITACHI drives
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: fix ATAPI issues with memory over 4GB (v7)
  • From: Jeff Garzik
• Re: [patch 1/1] ata: drivers/ata/sata_mv.c needs dmapool.h
  • From: Jeff Garzik
• Re: libata: kill now unused n_iter and fix sata_fsl
  • From: Jeff Garzik
• Re: [PATCH] ahci: fix CAP.NP and PI handling
  • From: Jeff Garzik
• Re: [PATCH 2/3 2.6.24-git] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Jeff Garzik
• Re: [Bugme-new] [Bug 9898] New: libata fails for ALi Corporation M5229 IDE
  • From: Andrew Morton
• [Bug 9898] libata fails for ALi Corporation M5229 IDE
  • From: bugme-daemon
• Re: 2.6.26-git0: IDE oops during boot
  • From: Pavel Machek
• [Bug 9898] libata fails for ALi Corporation M5229 IDE
  • From: bugme-daemon
• [Bug 9898] New: libata fails for ALi Corporation M5229 IDE
  • From: bugme-daemon
• [PATCH] ahci: fix CAP.NP and PI handling
  • From: Tejun Heo
• Re: slow resume from s2ram
  • From: Tejun Heo
• ST310211A and HPA ( was Re: Bug#401035: linux-image-2.6-686 - another misbehaving Seagate )
  • From: Mikko Rapeli
• Re: ide-tape redux (was: Re:)
  • From: Borislav Petkov
• Re: ide-tape redux (was: Re:)
  • From: Borislav Petkov
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: Problem burning DVDs with Marvell 88SE6121 on pata_marvell
  • From: Mike Hokenson
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE updates part #5
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-pci-generic: kill the unused ifdef/endif/MODULE code
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patches] IDE updates part #4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Andrew Morton
• Re: Problem burning DVDs with Marvell 88SE6121 on pata_marvell
  • From: Andrew Morton
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• Re: [PATCH] ide: another possible ide panic fix for blk-end-request
  • From: Kiyoshi Ueda
• Re: [PATCH 2/3 2.6.24-git] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Russell King - ARM Linux
• Re: [git patches] IDE updates part #4
  • From: Linus Torvalds
• Re: libata pm
  • From: dusty@xxxxxx
• Re: (fwd) Bug#11922: I/O error on blank tapes
  • From: Kai Makisara
• [PATCH] Palmchip BK3710 IDE driver
  • From: Anton Salnikov
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: AHCI driver preferring nr_ports over port map
  • From: Jan Beulich
• slow resume from s2ram
  • From: Brian Keck
• Re: AHCI driver preferring nr_ports over port map
  • From: Tejun Heo
• Re: AHCI driver preferring nr_ports over port map
  • From: Jan Beulich
• Re: AHCI driver preferring nr_ports over port map
  • From: Tejun Heo
• RE: [PATCH 0/7] blk_end_request: full I/O completion handler
  • From: S, Chandrakala (STSD)
• Re: [PATCH 0/7] blk_end_request: full I/O completion handler
  • From: Jens Axboe
• [BUG] 2.6.24-mm1 and 2.6.24-git13 kernel panic's while bootup at ide_device_add_all
  • From: Kamalesh Babulal
• [PATCH 5/5] libata: implement drain buffers
  • From: Tejun Heo
• [PATCH 4/5] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• [PATCH 3/5] block: implement request_queue->dma_drain_needed
  • From: Tejun Heo
• [PATCH 2/5] block: add request->raw_data_len
  • From: Tejun Heo
• [PATCHSET #upstream] block/libata: update and use block layer padding and draining
  • From: Tejun Heo
• [PATCH 1/5] block: update bio according to DMA alignment padding
  • From: Tejun Heo
• Re: AHCI driver preferring nr_ports over port map
  • From: Jan Beulich
• [patch 1/1] ata: drivers/ata/sata_mv.c needs dmapool.h
  • From: akpm
• Re: [PATCH] ide: another possible ide panic fix for blk-end-request
  • From: Borislav Petkov
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• libata: kill now unused n_iter and fix sata_fsl
  • From: Tejun Heo
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH 07/22] ide-tape: struct idetape_tape_t: shorten member names v2
  • From: Borislav Petkov
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Gene Heskett
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• [PATCH] sata_nv: fix ATAPI issues with memory over 4GB (v7)
  • From: Robert Hancock
• Re: [PATCH 20/22] ide-tape: cleanup the remaining codestyle issues
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 02/22] ide-tape: remove struct idetape_read_position_result_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 14/22] ide-tape: cleanup and fix comments
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 07/22] ide-tape: struct idetape_tape_t: shorten member names v2
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ppc: fix #ifdef-s in mediabay driver (take 2)
  • From: Bartlomiej Zolnierkiewicz
• ide-tape redux (was: Re:)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: (fwd) Bug#11922: I/O error on blank tapes
  • From: James Bottomley
• Re: (fwd) Bug#11922: I/O error on blank tapes
  • From: Stephen Kitt
• Re: (fwd) Bug#11922: I/O error on blank tapes
  • From: Borislav Petkov
• [PATCH] ide: another possible ide panic fix for blk-end-request
  • From: Kiyoshi Ueda
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Mark Lord
• [PATCH] libata-core: unblacklist HITACHI drives
  • From: David Milburn
• [PATCH 3/3] libata: implement drain buffers
  • From: James Bottomley
• [PATCH 2/3] block: add blk_rq_drain_size() API
  • From: James Bottomley
• [PATCH 1/3] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: [PATCH 7/9] libata: stop overloading port_info->private_data
  • From: Alan Cox
• Re: [PATCH 4/9] libata: normalize port_info, port_operations and sht tables
  • From: Alan Cox
• (fwd) Bug#11922: I/O error on blank tapes
  • From: maximilian attems
• [no subject]
  • From: Borislav Petkov
• [PATCH 10/22] ide-tape: shorten some function names
  • From: Borislav Petkov
• [PATCH 13/22] ide-tape: remove struct idetape_id_gcw
  • From: Borislav Petkov
• [PATCH 18/22] ide-tape: remove leftover OnStream support warning
  • From: Borislav Petkov
• [PATCH 07/22] ide-tape: struct idetape_tape_t: shorten member names v2
  • From: Borislav Petkov
• [PATCH 20/22] ide-tape: cleanup the remaining codestyle issues
  • From: Borislav Petkov
• [PATCH 21/22] ide-tape: bump minor driver version
  • From: Borislav Petkov
• [PATCH 22/22] ide-tape: schedule driver for removal after 6 months in case it turns out
  • From: Borislav Petkov
• [PATCH 14/22] ide-tape: cleanup and fix comments
  • From: Borislav Petkov
• [PATCH 16/22] ide-tape: include proper headers
  • From: Borislav Petkov
• [PATCH 11/22] ide-tape: remove atomic test/set macros
  • From: Borislav Petkov
• [PATCH 15/22] ide-tape: remove unused "length" arg from idetape_create_read_buffer_cmd()
  • From: Borislav Petkov
• [PATCH 03/22] ide-tape: remove unreachable code chunk
  • From: Borislav Petkov
• [PATCH 17/22] ide-tape: collect module-related macro calls at the end
  • From: Borislav Petkov
• [PATCH 19/22] ide-tape: fix syntax error in idetape_identify_device()
  • From: Borislav Petkov
• [PATCH 09/22] ide-tape: remove idetape_increase_max_pipeline_stages()
  • From: Borislav Petkov
• [PATCH 12/22] ide-tape: dump gcw fields on error in idetape_identify_device()
  • From: Borislav Petkov
• [PATCH 04/22] ide-tape: simplify code branching in the interrupt handler
  • From: Borislav Petkov
• [PATCH 05/22] ide-tape: remove typedef idetape_chrdev_direction_t
  • From: Borislav Petkov
• [PATCH 06/22] ide-tape: struct idetape_tape_t: remove unused members
  • From: Borislav Petkov
• [PATCH 08/22] ide-tape: remove packet command and struct request memory buffers
  • From: Borislav Petkov
• [PATCH 01/22] ide-tape: refactor the debug logging facility
  • From: Borislav Petkov
• [PATCH 02/22] ide-tape: remove struct idetape_read_position_result_t
  • From: Borislav Petkov
• Re: AHCI driver preferring nr_ports over port map
  • From: Tejun Heo
• Re: AHCI driver preferring nr_ports over port map
  • From: Jan Beulich
• Re: AHCI driver preferring nr_ports over port map
  • From: Tejun Heo
• Re: AHCI driver preferring nr_ports over port map
  • From: Jan Beulich
• Re: [PATCH] ide-tape: dump gcw fields on error in idetape_identify_device()
  • From: Borislav Petkov
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: PROBLEM REMAINS: [sata_nv ADMA breaks ATAPI] Crash on accessing DVD-RAM
  • From: Alexander
• Re: Hot (un)plugging of a SATA drive with sata_nv (CK8S)?
  • From: Ignacy Gawedzki
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Sam Ravnborg
• [PATCH] ses: add new Enclosure ULD
  • From: James Bottomley
• [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Jeff Garzik
• Re: [PATCH 4/5] ide: add ide_read_[alt]status() inline helpers
  • From: Sergei Shtylyov
• Re: [PATCH 5/5] ide: add ide_read_error() inline helper
  • From: Sergei Shtylyov
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tuomas Jormola
• Re: [PATCH] ide-tape: dump gcw fields on error in idetape_identify_device()
  • From: Sergei Shtylyov
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH 1/5] ide: remove write-only ->sata_misc[] from ide_hwif_t
  • From: Sergei Shtylyov
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Jeff Garzik
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH 23/32] ide-tape: struct idetape_tape_t: shorten member names
  • From: Borislav Petkov
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Gene Heskett
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Ingo Molnar
• Re: PCI: Remove users of pci_enable_device_bars()
  • From: Benjamin Herrenschmidt
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Gene Heskett
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Ingo Molnar
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Ingo Molnar
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Gene Heskett
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Tejun Heo
• RE: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Kuan Luo
• Re: [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Jeff Garzik
• Re: [PATCH 3/3 2.6.24-git] PPC/LIBATA: Select HAVE_PATA_PLATFORM for ARCH_PPC
  • From: Olof Johansson
• [BUG] 2.6.24 refuses to boot - ATA problem?
  • From: Chris Rankin
• Re: [PATCH 28/32] ide-tape: shorten some function names
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 27/32] ide-tape: remove idetape_increase_max_pipeline_stages()
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC PATCH 26/32] ide-tape: remove packet command and struct request memory buffers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 23/32] ide-tape: struct idetape_tape_t: shorten member names
  • From: Bartlomiej Zolnierkiewicz
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Robert Hancock
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tejun Heo
• Re: [PATCH 3/3 2.6.24-git] PPC/LIBATA: Select HAVE_PATA_PLATFORM for ARCH_PPC
  • From: Ben Dooks
• Re: PCI: Remove users of pci_enable_device_bars()
  • From: Greg KH
• Re: PCI: Remove users of pci_enable_device_bars()
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE updates part #4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3 2.6.24-git] PPC/LIBATA: Select HAVE_PATA_PLATFORM for ARCH_PPC
  • From: Olof Johansson
• Re: [PATCH] ide-core: remove conditional compiling with MODULE in ide-core.c
  • From: Bodo Eggert
• [PATCH] ide-tape: dump gcw fields on error in idetape_identify_device()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-scsi: remove needless SELECT_DRIVE() call
  • From: Bartlomiej Zolnierkiewicz
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tuomas Jormola
• [PATCH 3/3 2.6.24-git] PPC/LIBATA: Select HAVE_PATA_PLATFORM for ARCH_PPC
  • From: Ben Dooks
• [no subject]
  • From: Ben Dooks
• [PATCH 0/3 2.6.24-git] Add HAVE_PLATFROM_PATA Kconfig
  • From: Ben Dooks
• [PATCH 1/3 2.6.24-git] LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
  • From: Ben Dooks
• [PATCH 0/3 2.6.24-git] Add HAVE_PLATFORM_PATA Kconfig
  • From: Ben Dooks
• [PATCH 1/3 2.6.24-git] LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver
  • From: Ben Dooks
• [PATCH 2/3 2.6.24-git] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Ben Dooks
• [PATCH 2/3 2.6.24-git] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Ben Dooks
• [PATCH] ide-pci-generic: kill the unused ifdef/endif/MODULE code
  • From: Denis Cheng
• Re: AHCI driver preferring nr_ports over port map
  • From: Tejun Heo
• [PATCH] ide-core: remove conditional compiling with MODULE in ide-core.c
  • From: Denis Cheng
• Re: Hitachi 7K1000 1tb drives and sata_sil 3114 chipset
  • From: Tejun Heo
• Re: Problem with ata layer in 2.6.24
  • From: Tejun Heo
• Re: PCI: Remove users of pci_enable_device_bars()
  • From: Jeff Garzik
• Re: [PATCH] PCI subsystem: AMD SATA IDE mode quirk
  • From: Jeff Garzik
• Re: ATA Problems: Back in the Land of the Unhappy Camper
  • From: Tejun Heo
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tejun Heo
• Re: 2.6.24 sata_sil Sil3114 drive clicking / restarting?
  • From: Tejun Heo
• RE: [PATCH 2.6.23.11]: [sata_svw]: Add ATAPI DMA support for HT1x00 SATA controller
  • From: Anantha Subramanyam
• Re: excess timeouts accessing pci-sata card both ports
  • From: Tejun Heo
• RE: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Shane Huang
• Re: SiI 3512 Serial ATA Controller - kernel 2.6.23
  • From: Tejun Heo
• [PATCH 3/5] ide: remove ide_setup_ports()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/5] ide: add ide_read_error() inline helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/5] ide: add ide_read_[alt]status() inline helpers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/5] ide: remove redundant BUG_ON() from [atapi_]reset_pollfunc()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/5] ide: remove write-only ->sata_misc[] from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2.6.23.11]: [sata_svw]: Add ATAPI DMA support for HT1x00 SATA controller
  • From: Jeff Garzik
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Tejun Heo
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: Jeff Garzik
• [git patches] IDE updates part #3
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ide/ppc/pmac.c section fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] ide: make wait_drive_not_busy() static again
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] small ide-scan-pci.c cleanup
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Use on-board instead of built-in in config options
  • From: Bartlomiej Zolnierkiewicz
• Re: [2.6 patch] unexport ide_dma_on
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: [PATCH RESEND] libata: implement drain buffers
  • From: James Bottomley
• Re: [PATCH 9/9] libata: make reset related methods proper port operations
  • From: Jeff Garzik
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Jeff Garzik
• Re: [PATCH 4/9] libata: normalize port_info, port_operations and sht tables
  • From: Jeff Garzik
• Re: [PATCH 3/9] libata: implement and use ata_noop_irq_clear()
  • From: Jeff Garzik
• Re: [PATCH 1/9] libata: PCI device should be powered up before being accessed
  • From: Jeff Garzik
• Re: [PATCH #upstream] libata: make EH fail gracefully if no reset method is available
  • From: Jeff Garzik
• Re: [PATCH 2/4] libata: update ATAPI overflow draining
  • From: Jeff Garzik
• Re: [PATCHSET libata-dev#upstream] libata: prefer hardreset
  • From: Jeff Garzik
• Re: [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: Jeff Garzik
• Re: [PATCH RESEND] libata: implement drain buffers
  • From: Jeff Garzik
• Re: [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: saeed bishara
• [PATCH RESEND] libata: implement drain buffers
  • From: James Bottomley
• [PATCH RESEND number 2] libata: eliminate the home grown dma padding in favour of that provided by the block layer
  • From: James Bottomley
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: Paul Mundt
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Sam Ravnborg
• [git patches] libata updates
  • From: Jeff Garzik
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Borislav Petkov
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Bartlomiej Zolnierkiewicz
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Jeff Garzik
• Re: [PATCH] pci: allow multiple calls to pcim_enable_device()
  • From: Jeff Garzik
• Re: [PATCH 1/4] [libata] Blackfin pata-bf54x driver: Remove obsolete PM function
  • From: Jeff Garzik
• Re: [PATCH] pata_legacy: multiple updates (rediff as asked)
  • From: Jeff Garzik
• Re: [PATCH] pata_sl82c105: dual channel support
  • From: Jeff Garzik
• Re: [2.6 patch] ata_piix.c: make piix_merge_scr() static
  • From: Jeff Garzik
• Re: [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: Jeff Garzik
• Re: [PATCH] sata_nv: fix for completion handling
  • From: Jeff Garzik
• Re: [PATCH 1/2 v3] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• AHCI driver preferring nr_ports over port map
  • From: Jan Beulich
• [PATCH #upstream] libata: implement libata.force module parameter
  • From: Tejun Heo
• Re: libata pm
  • From: dusty@xxxxxx
• Re: libata pm
  • From: Tejun Heo
• Re: libata pm
  • From: Mark Lord
• Re: libata pm
  • From: Tejun Heo
• Re: libata pm
  • From: dusty@xxxxxx
• Re: PROBLEM REMAINS: [sata_nv ADMA breaks ATAPI] Crash on accessing DVD-RAM
  • From: Alexander
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Tejun Heo
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Borislav Petkov
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Borislav Petkov
• Re: PROBLEM REMAINS: [sata_nv ADMA breaks ATAPI] Crash on accessing DVD-RAM
  • From: Robert Hancock
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Borislav Petkov
• Re: Add one more HITACHI SATA disk to NCQ blacklist
  • From: Simos Xenitellis
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: Bug: get EXT3-fs error Allocating block in system zone
  • From: Marco Gatti
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Jens Axboe
• Re: Add one more HITACHI SATA disk to NCQ blacklist
  • From: Mark Lord
• Re: Add one more HITACHI SATA disk to NCQ blacklist
  • From: Mark Lord
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Add one more HITACHI SATA disk to NCQ blacklist
  • From: Simos Xenitellis
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Florian Lohoff
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Jens Axboe
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Jens Axboe
• RE: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Shane Huang
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mikael Pettersson
• RE: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Shane Huang
• Re: [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations
  • From: Akira Iguchi
• Re: [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations
  • From: Akira Iguchi
• Hitachi 7K1000 1tb drives and sata_sil 3114 chipset
  • From: Andrew Paprocki
• Re: [PATCH] pci: allow multiple calls to pcim_enable_device()
  • From: Greg KH
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Nai Xia
• Re: DMA mapping on SCSI device?
  • From: Matthew Wilcox
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Tejun Heo
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Tejun Heo
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Tejun Heo
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Tejun Heo
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Roland Dreier
• Re: kernel BUG at ide-cd.c:1726 in 2.6.24-03863-g0ba6c33 && -g8561b089
  • From: Kiyoshi Ueda
• Re: libata pm
  • From: Tejun Heo
• Re: DMA mapping on SCSI device?
  • From: Robert Hancock
• Re: libata pm
  • From: dusty@xxxxxx
• [PATCH 2/2 v3] sata_mv: Support SoC controllers
  • From: saeed . bishara
• [PATCH 1/2 v3] sata_mv: Remove PCI dependency
  • From: saeed . bishara
• [2.6 patch] ide/ppc/pmac.c section fixes
  • From: Adrian Bunk
• [2.6 patch] ata_piix.c:piix_init_one() must be __devinit
  • From: Adrian Bunk
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• Re: DMA mapping on SCSI device?
  • From: Mark Lord
• Re: DMA mapping on SCSI device?
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• GIT tree available
  • From: Tejun Heo
• Re: [PATCH 10/13] sata_mv ncq Introduce per-tag SG tables
  • From: Jeff Garzik
• How to verify sht-ops-conversion patch doesn't change anything
  • From: Tejun Heo
• [PATCH 5/9] libata: implement and use SHT initializers and ops inheritance
  • From: Tejun Heo
• [PATCH 9/9] libata: make reset related methods proper port operations
  • From: Tejun Heo
• [PATCH 6/9] make ata_pci_init_one() not use ops->irq_handler and pi->sht
  • From: Tejun Heo
• [PATCH 7/9] libata: stop overloading port_info->private_data
  • From: Tejun Heo
• [PATCH 8/9] libata: kill port_info->sht and ->irq_handler
  • From: Tejun Heo
• [PATCH 4/9] libata: normalize port_info, port_operations and sht tables
  • From: Tejun Heo
• [PATCH 1/9] libata: PCI device should be powered up before being accessed
  • From: Tejun Heo
• [PATCH 3/9] libata: implement and use ata_noop_irq_clear()
  • From: Tejun Heo
• [PATCH 2/9] libata: reorganize ata_port_operations
  • From: Tejun Heo
• [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations
  • From: Tejun Heo
• [PATCH] pci: allow multiple calls to pcim_enable_device()
  • From: Tejun Heo
• [PATCH #upstream] libata: make EH fail gracefully if no reset method is available
  • From: Tejun Heo
• [PATCH 2/4] [libata] Blackfin pata-bf54x driver: Add debug information
  • From: Bryan Wu
• [PATCH 4/4] [libata] Blackfin pata-bf54x driver: fix compiling bug - no ata_port struct in struct ata_device any more
  • From: Bryan Wu
• [PATCH 1/4] [libata] Blackfin pata-bf54x driver: Remove obsolete PM function
  • From: Bryan Wu
• [PATCH 3/4] [libata] Blackfin pata-bf54x driver: should cover all possible interrupt sources
  • From: Bryan Wu
• [PATCH 0/4] [libata] Blackfin pata-bf54x driver updates
  • From: Bryan Wu
• Re: [PATCH] sata_nv: fix for completion handling
  • From: Robert Hancock
• Re: [PATCH] sata_nv: fix for completion handling
  • From: Tejun Heo
• Re: DMA mapping on SCSI device?
  • From: Robert Hancock
• [PATCH] sata_nv: fix for completion handling
  • From: Robert Hancock
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Bartlomiej Zolnierkiewicz
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: DMA mapping on SCSI device?
  • From: Luben Tuikov
• Re: DMA mapping on SCSI device?
  • From: Luben Tuikov
• Re: [Bugme-new] [Bug 9845] New: libata still broken for Pegasos on 2.6.24
  • From: Chuck Ebbert
• Re: [Bugme-new] [Bug 9845] New: libata still broken for Pegasos on 2.6.24
  • From: Andrew Morton
• ATA Problems: Back in the Land of the Unhappy Camper
  • From: rgheck
• Re: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Kelly Anderson
• Re: [PATCH 1/2 v2] sata_mv: Remove PCI dependency
  • From: saeed bishara
• Re: [PATCH 5/8] ide: always set DMA masks in ide_pci_setup_ports()
  • From: Sergei Shtylyov
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Alan Cox
• Re: [PATCH] Palmchip BK3710 IDE driver
  • From: Sergei Shtylyov
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• RE: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
  • From: Gaston, Jason D
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• [PATCH 1/2 v2] sata_mv: Remove PCI dependency
  • From: saeed . bishara
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Jeff Garzik
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: saeed bishara
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
  • From: Jeff Garzik
• Re: [PATCH 2.6.24] ahci: RAID mode SATA patch for Intel ICH10 DeviceID's
  • From: Jeff Garzik
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH 09/13] sata_mv ncq Use DMA memory pools for hardware memory tables
  • From: Jeff Garzik
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Jeff Garzik
• Re: Problem with ata layer in 2.6.24
  • From: rgheck
• Re: Problem with ata layer in 2.6.24
  • From: Mikael Pettersson
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Jeff Garzik
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: Mark Lord
• Re: Make_bad_sector
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Make_bad_sector
  • From: Greg Freemyer
• Re: DMA mapping on SCSI device?
  • From: James Bottomley
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: [PATCH 1/2] [libata] sata_mv: Remove PCI dependency
  • From: saeed bishara
• Re: Problem with ata layer in 2.6.24
  • From: Florian Attenberger
• Re: Problem with ata layer in 2.6.24
  • From: Michal Jaegermann
• Re: Problem with ata layer in 2.6.24
  • From: Kasper Sandberg
• RE: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.
  • From: Kuan Luo
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Borislav Petkov
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: DMA mapping on SCSI device?
  • From: Andi Kleen
• Re: Problem with ata layer in 2.6.24
  • From: Kasper Sandberg
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: DMA mapping on SCSI device?
  • From: Matthew Wilcox
• Re: DMA mapping on SCSI device?
  • From: Grant Grundler
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• RE: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.
  • From: Kuan Luo
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• [PATCH 2.6.24] ata_piix: IDE mode SATA patch for Intel ICH10 DeviceID's
  • From: Jason Gaston
• [PATCH 2.6.24] ahci: RAID mode SATA patch for Intel ICH10 DeviceID's
  • From: Jason Gaston
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• DMA mapping on SCSI device?
  • From: Robert Hancock
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: fixed a bug of adma in rhel4u5 with HDS7250SASUN500G.
  • From: Robert Hancock
• Re: Hot (un)plugging of a SATA drive with sata_nv (CK8S)?
  • From: Robert Hancock
• Re: [2.6 patch] ata_piix.c: make piix_merge_scr() static
  • From: Tejun Heo
• [2.6 patch] ata_piix.c: make piix_merge_scr() static
  • From: Adrian Bunk
• [2.6 patch] ide: make wait_drive_not_busy() static again
  • From: Adrian Bunk
• [2.6 patch] small ide-scan-pci.c cleanup
  • From: Adrian Bunk
• [2.6 patch] unexport ide_dma_on
  • From: Adrian Bunk
• Re: [Bugme-new] [Bug 9837] New: I can't boot with a PLEXTOR PX-740A
  • From: Andrew Morton
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Sergei Shtylyov
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Alan Cox
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Jeff Garzik
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Richard Heck
• Re: Problem with ata layer in 2.6.24
  • From: Mark Lord
• Re: Problem with ata layer in 2.6.24
  • From: Daniel Barkalow
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Zan Lynx
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Dave Neuer
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Calvin Walton
• Re: Marvel 88SE6121 driver
  • From: Mike Zheng
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• [PATCH] pata_legacy: multiple updates (rediff as asked)
  • From: Alan Cox
• [PATCH] pata_sl82c105: dual channel support
  • From: Alan Cox
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Bartlomiej Zolnierkiewicz
• Re: Problem with ata layer in 2.6.24
  • From: Richard Heck
• Re: Marvel 88SE6121 driver
  • From: Sergei Shtylyov
• Marvel 88SE6121 driver
  • From: Mike Zheng
• Re: Problem with ata layer in 2.6.24
  • From: Mikael Pettersson
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: Problem with ata layer in 2.6.24
  • From: Gene Heskett
• Re: libata pm
  • From: Tejun Heo
• Re: libata pm
  • From: dusty@xxxxxx
• PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tuomas Jormola
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: [PATCH 1/5] libata: prefer hardreset
  • From: Tejun Heo
• Re: [PATCH 1/5] libata: prefer hardreset
  • From: Tejun Heo
• Re: libata pm
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Tejun Heo
• Re: sata_sil24 / Alpha / 4726 PMP issue ..
  • From: Thomas Evans
• Re: libata pm
  • From: dusty@xxxxxx
• Re: [PATCH 21/32] ide-tape: idetape_chrdev_direction_t:shorten enum names
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 22/32] ide-tape: struct idetape_packet_command_s: shorten member names
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 24/32] ide-tape: remove unreachable code chunk
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 10/32] ide-tape: remove struct idetape_read_position_result_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/32] ide-tape redux v1
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 25/32] ide-tape: simplify code branching in the interrupt handler
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 31/32] ide-tape: remove idetape_config_t typedef
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 29/32] ide-tape: remove mtio.h related comments
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 08/32] ide-tape: remove struct idetape_capabilities_page_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 07/32] ide-tape: refactor the debug logging facility
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/32] ide-tape: remove struct idetape_mode_parameter_header_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 06/32] ide-tape: remove IDETAPE_DEBUG_BUGS
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/32] ide-tape: remove struct idetape_request_sense_result_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/32] ide-tape: move historical changelog to Documentation/ide/ChangeLog.ide-tape.1995-2002
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.24 sata_sil Sil3114 drive clicking / restarting?
  • From: Andrew Paprocki
• Re: 2.6.24 sata_sil Sil3114 drive clicking / restarting?
  • From: Jim Paris
• 2.6.24 sata_sil Sil3114 drive clicking / restarting?
  • From: Andrew Paprocki
• Re: Linux 2.6.24 sata_promise SATA300TX4 problems
  • From: Peter Favrholdt
• Re: No DMA on a Dell Latitude D820 with >2.6.20
  • From: Mark Lord
• No DMA on a Dell Latitude D820 with >2.6.20
  • From: Mikel Olasagasti
• [PATCH] Use on-board instead of built-in in config options
  • From: Frans Pop
• Re: [PATCH 06/32] ide-tape: remove IDETAPE_DEBUG_BUGS
  • From: Borislav Petkov
• [PATCH 30/32] ide-tape: remove atomic test/set macros
  • From: Borislav Petkov
• [PATCH 32/32] ide-tape: cleanup the remaining codestyle issues
  • From: Borislav Petkov
• [PATCH 24/32] ide-tape: remove unreachable code chunk
  • From: Borislav Petkov
• [PATCH 22/32] ide-tape: struct idetape_packet_command_s: shorten member names
  • From: Borislav Petkov
• [PATCH 23/32] ide-tape: struct idetape_tape_t: shorten member names
  • From: Borislav Petkov
• [RFC PATCH 26/32] ide-tape: remove packet command and struct request memory buffers
  • From: Borislav Petkov
• [PATCH 27/32] ide-tape: remove idetape_increase_max_pipeline_stages()
  • From: Borislav Petkov
• [PATCH 28/32] ide-tape: shorten some function names
  • From: Borislav Petkov
• [PATCH 31/32] ide-tape: remove idetape_config_t typedef
  • From: Borislav Petkov
• [PATCH 25/32] ide-tape: simplify code branching in the interrupt handler
  • From: Borislav Petkov
• [PATCH 29/32] ide-tape: remove mtio.h related comments
  • From: Borislav Petkov
• [PATCH 20/32] ide-tape: make function name more accurate
  • From: Borislav Petkov
• [PATCH 16/32] ide-tape: use generic scsi commands
  • From: Borislav Petkov
• [PATCH 19/32] ide-tape: remove unused sense packet commands.
  • From: Borislav Petkov
• [PATCH 13/32] ide-tape: remove struct idetape_parameter_block_descriptor_t
  • From: Borislav Petkov
• [PATCH 21/32] ide-tape: idetape_chrdev_direction_t:shorten enum names
  • From: Borislav Petkov
• [PATCH 18/32] ide-tape: use generic byteorder macros
  • From: Borislav Petkov
• [PATCH 17/32] ide-tape: remove EXPERIMENTAL driver status
  • From: Borislav Petkov
• [PATCH 14/32] ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t
  • From: Borislav Petkov
• [PATCH 15/32] ide-tape: remove struct idetape_block_size_page_t
  • From: Borislav Petkov
• [PATCH 12/32] ide-tape: remove struct idetape_medium_partition_page_t
  • From: Borislav Petkov
• [PATCH 11/32] ide-tape: remove struct idetape_data_compression_page_t
  • From: Borislav Petkov
• [PATCH 07/32] ide-tape: refactor the debug logging facility
  • From: Borislav Petkov
• [PATCH 08/32] ide-tape: remove struct idetape_capabilities_page_t
  • From: Borislav Petkov
• [PATCH 09/32] ide-tape: remove struct idetape_inquiry_result_t
  • From: Borislav Petkov
• [PATCH 06/32] ide-tape: remove IDETAPE_DEBUG_BUGS
  • From: Borislav Petkov
• [PATCH 10/32] ide-tape: remove struct idetape_read_position_result_t
  • From: Borislav Petkov
• [PATCH 1/32] ide-tape: move historical changelog to Documentation/ide/ChangeLog.ide-tape.1995-2002
  • From: Borislav Petkov
• [PATCH 5/32] ide-tape: remove IDETAPE_DEBUG_INFO
  • From: Borislav Petkov