* Add IDE_HFLAG_FORCE_LEGACY_IRQS host flag for Motorola-LoPEC platform
to sl82c105 host driver.
* Remove ppc_ide_md hooks from arch/ppc/platforms/lopec.c - no need for
them (sl82c105 host driver takes care of all this setup).
* Then remove no longer needed <linux/ide.h> include.
Looking at arch/ppc/configs/lopec_defconfig:
...
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_SL82C105=y
...
there should be no functional changes unless somebody preferred to disable
sl82c105 host driver and use only ide_generic one (but why would anybody
want to do such thing :-).
PS It seems that lopec_defconfig hasn't been updated for ages but if somebody
is going to do it please look into disabling IDE_GENERIC and BLK_DEV_GENERIC
config options. Thanks.
Cc: Benjamin Herrenschmidt <benh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>
---
arch/ppc/platforms/lopec.c | 85 ---------------------------------------------
drivers/ide/pci/sl82c105.c | 4 ++
2 files changed, 4 insertions(+), 85 deletions(-)
Index: b/arch/ppc/platforms/lopec.c
===================================================================
--- a/arch/ppc/platforms/lopec.c
+++ b/arch/ppc/platforms/lopec.c
@@ -15,7 +15,6 @@
#include <linux/pci_ids.h>
#include <linux/ioport.h>
#include <linux/init.h>
-#include <linux/ide.h>
#include <linux/seq_file.h>
#include <linux/initrd.h>
#include <linux/console.h>
@@ -168,85 +167,6 @@ lopec_power_off(void)
lopec_halt();
}
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
-int lopec_ide_ports_known = 0;
-static unsigned long lopec_ide_regbase[MAX_HWIFS];
-static unsigned long lopec_ide_ctl_regbase[MAX_HWIFS];
-static unsigned long lopec_idedma_regbase;
-
-static void
-lopec_ide_probe(void)
-{
- struct pci_dev *dev = pci_get_device(PCI_VENDOR_ID_WINBOND,
- PCI_DEVICE_ID_WINBOND_82C105,
- NULL);
- lopec_ide_ports_known = 1;
-
- if (dev) {
- lopec_ide_regbase[0] = dev->resource[0].start;
- lopec_ide_regbase[1] = dev->resource[2].start;
- lopec_ide_ctl_regbase[0] = dev->resource[1].start;
- lopec_ide_ctl_regbase[1] = dev->resource[3].start;
- lopec_idedma_regbase = dev->resource[4].start;
- pci_dev_put(dev);
- }
-}
-
-static int
-lopec_ide_default_irq(unsigned long base)
-{
- if (lopec_ide_ports_known == 0)
- lopec_ide_probe();
-
- if (base == lopec_ide_regbase[0])
- return 14;
- else if (base == lopec_ide_regbase[1])
- return 15;
- else
- return 0;
-}
-
-static unsigned long
-lopec_ide_default_io_base(int index)
-{
- if (lopec_ide_ports_known == 0)
- lopec_ide_probe();
- return lopec_ide_regbase[index];
-}
-
-static void __init
-lopec_ide_init_hwif_ports(hw_regs_t *hw, unsigned long data,
- unsigned long ctl, int *irq)
-{
- unsigned long reg = data;
- uint alt_status_base;
- int i;
-
- for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++)
- hw->io_ports[i] = reg++;
-
- if (data == lopec_ide_regbase[0]) {
- alt_status_base = lopec_ide_ctl_regbase[0] + 2;
- hw->irq = 14;
- } else if (data == lopec_ide_regbase[1]) {
- alt_status_base = lopec_ide_ctl_regbase[1] + 2;
- hw->irq = 15;
- } else {
- alt_status_base = 0;
- hw->irq = 0;
- }
-
- if (ctl)
- hw->io_ports[IDE_CONTROL_OFFSET] = ctl;
- else
- hw->io_ports[IDE_CONTROL_OFFSET] = alt_status_base;
-
- if (irq != NULL)
- *irq = hw->irq;
-
-}
-#endif /* BLK_DEV_IDE */
-
static void __init
lopec_init_IRQ(void)
{
@@ -384,11 +304,6 @@ platform_init(unsigned long r3, unsigned
ppc_md.nvram_read_val = todc_direct_read_val;
ppc_md.nvram_write_val = todc_direct_write_val;
-#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
- ppc_ide_md.default_irq = lopec_ide_default_irq;
- ppc_ide_md.default_io_base = lopec_ide_default_io_base;
- ppc_ide_md.ide_init_hwif = lopec_ide_init_hwif_ports;
-#endif
#ifdef CONFIG_SERIAL_TEXT_DEBUG
ppc_md.progress = gen550_progress;
#endif
Index: b/drivers/ide/pci/sl82c105.c
===================================================================
--- a/drivers/ide/pci/sl82c105.c
+++ b/drivers/ide/pci/sl82c105.c
@@ -328,6 +328,10 @@ static const struct ide_port_info sl82c1
.enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
.host_flags = IDE_HFLAG_IO_32BIT |
IDE_HFLAG_UNMASK_IRQS |
+/* FIXME: check for Compatibility mode in generic IDE PCI code */
+#ifdef CONFIG_LOPEC
+ IDE_HFLAG_FORCE_LEGACY_IRQS |
+#endif
IDE_HFLAG_NO_AUTODMA |
IDE_HFLAG_BOOTABLE,
.pio_mask = ATA_PIO5,
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
