Byron Bradley wrote:
I'm having problems getting the sata_mv driver working as a platform
driver on the QNAP TS-209 and the Linkstation/Kurobox (both are Marvell
Orion 88f5182 based devices). First of all it would oops in
mv_port_start() while calling dma_pool_alloc(), the patch to fix this is
at the end of this email.
..
Ouch. I'd say this is proof-positive that Saeed did not even test his
latest patches. Your fix below looks straightforward and correct.
..
From: Byron Bradley <byron.bbradley@xxxxxxxxx>
Subject: [PATCH] sata_mv: platform driver allocs dma without create
When the sata_mv driver is used as a platform driver,
mv_create_dma_pools() is never called so it fails when trying
to alloc in mv_pool_start().
Signed-off-by: Byron Bradley <byron.bbradley@xxxxxxxxx>
..
Signed-off-by: Mark Lord <mlord@xxxxxxxxx>
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f5333ce..04b5717 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2881,6 +2881,26 @@ done:
return rc;
}
+static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
+{
+ hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ,
+ MV_CRQB_Q_SZ, 0);
+ if (!hpriv->crqb_pool)
+ return -ENOMEM;
+
+ hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ,
+ MV_CRPB_Q_SZ, 0);
+ if (!hpriv->crpb_pool)
+ return -ENOMEM;
+
+ hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ,
+ MV_SG_TBL_SZ, 0);
+ if (!hpriv->sg_tbl_pool)
+ return -ENOMEM;
+
+ return 0;
+}
+
/**
* mv_platform_probe - handle a positive probe of an soc Marvell
* host
@@ -2934,6 +2954,10 @@ static int mv_platform_probe(struct platform_device *pdev)
hpriv->base = ioremap(res->start, res->end - res->start + 1);
hpriv->base -= MV_SATAHC0_REG_BASE;
+ rc = mv_create_dma_pools(hpriv, &pdev->dev);
+ if (rc)
+ return rc;
+
/* initialize adapter */
rc = mv_init_host(host, chip_soc);
if (rc)
@@ -3070,26 +3094,6 @@ static void mv_print_info(struct ata_host *host)
scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx");
}
-static int mv_create_dma_pools(struct mv_host_priv *hpriv, struct device *dev)
-{
- hpriv->crqb_pool = dmam_pool_create("crqb_q", dev, MV_CRQB_Q_SZ,
- MV_CRQB_Q_SZ, 0);
- if (!hpriv->crqb_pool)
- return -ENOMEM;
-
- hpriv->crpb_pool = dmam_pool_create("crpb_q", dev, MV_CRPB_Q_SZ,
- MV_CRPB_Q_SZ, 0);
- if (!hpriv->crpb_pool)
- return -ENOMEM;
-
- hpriv->sg_tbl_pool = dmam_pool_create("sg_tbl", dev, MV_SG_TBL_SZ,
- MV_SG_TBL_SZ, 0);
- if (!hpriv->sg_tbl_pool)
- return -ENOMEM;
-
- return 0;
-}
-
/**
* mv_pci_init_one - handle a positive probe of a PCI Marvell host
* @pdev: PCI device found
-
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
