Linux IDE Archive

• Thread Index

• [PATCH 02/10] IDE: Coding Style fixes to drivers/ide/legacy/umc8672.c
  • From: Paolo Ciarrocchi
• [PATCH 01/10] IDE: Coding Style fixes to drivers/ide/pci/sis5513.c
  • From: Paolo Ciarrocchi
• [PATCH 00/10] IDE: Coding Style Fixes
  • From: Paolo Ciarrocchi
• Re: 2.6.25-rc2 + smartd = hang
  • From: Andrey Borzenkov
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Jeff Garzik
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Tejun Heo
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Tejun Heo
• Re: [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Tejun Heo
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• [PATCH] ide: remove obsoleted "idex=noprobe" kernel parameter
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: skip probing port if "hdx=noprobe" was used for both devices on it
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: remove redundant comment from ide_unregister()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide: remove stale comments from ide-dma.c
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.25-rc2 + smartd = hang
  • From: Jeff Garzik
• Re: 2.6.25-rc2 + smartd = hang
  • From: Anders Eriksson
• Re: [PATCH] ide: remove stale comments from ide-dma.c
  • From: Mark Lord
• Re: ata_ram driver
  • From: Mark Lord
• Re: 2.6.25-rc2 + smartd = hang
  • From: Mark Lord
• [PATCH] ide: remove stale comments from ide-dma.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: remove ide-tape documentation from Documentation/ide.txt
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] qd65xx: remove commented out code
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] hpt366: fix section mismatch warnings
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] hpt366: fix section mismatch warnings
  • From: Sam Ravnborg
• [PATCH] libata-core: fix kernel-doc warning
  • From: Randy Dunlap
• ata_ram driver
  • From: Matthew Wilcox
• Re: [MCP-55] IDE problem after bios update
  • From: Alan Cox
• [MCP-55] IDE problem after bios update
  • From: Daniel Schroeder
• Re: [PATCH] hpt366: fix section mismatch warnings
  • From: Sergei Shtylyov
• [PATCH] hpt366: fix section mismatch warnings
  • From: Sam Ravnborg
• Re: 2.6.25-rc2 + smartd = hang
  • From: Anders Eriksson
• Re: 2.6.25-rc2 + smartd = hang
  • From: Jeff Garzik
• Re: ata-piix.c (and libata.ko) in RHEL5.1 (build 78 currently) - this kernel is 2.6.18 baqsed
  • From: Mark Lord
• Re: ata-piix.c (and libata.ko) in RHEL5.1 (build 78 currently) - this kernel is 2.6.18 baqsed
  • From: Alan Cox
• [PATCH] sata_fsl: fix build with ATA_VERBOSE_DEBUG
  • From: Anton Vorontsov
• Re: ata-piix.c (and libata.ko) in RHEL5.1 (build 78 currently) - this kernel is 2.6.18 baqsed
  • From: Mark Lord
• Re: [PATCH] libata: automatically use DMADIR if drive/bridge requires it
  • From: Jeff Garzik
• Re: ata-piix.c (and libata.ko) in RHEL5.1 (build 78 currently) - this kernel is 2.6.18 baqsed
  • From: Alan Cox
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: [PATCH] libata: automatically use DMADIR if drive/bridge requires it
  • From: Mark Lord
• Re: [PATCH] libata: automatically use DMADIR if drive/bridge requires it
  • From: Mark Lord
• RE: [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Shane Huang
• RE: [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Huang, Shane
• Re: [PATCH] libata: automatically use DMADIR if drive/bridge requires it
  • From: Albert Lee
• Re: What's needed for PMP support?
  • From: Alan Cox
• Re: [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Alan Cox
• Re: [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Jeff Garzik
• RE: [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Huang, Shane
• Re: [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Tejun Heo
• [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Huang, Shane
• new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: What's needed for PMP support?
  • From: Mark Lord
• Re: What's needed for PMP support?
  • From: Mark Lord
• Re: What's needed for PMP support?
  • From: Mark Lord
• Re: What's needed for PMP support?
  • From: Tejun Heo
• Re: What's needed for PMP support?
  • From: Mark Lord
• Re: JMicron - hard resetting link
  • From: Tejun Heo
• Re: What's needed for PMP support?
  • From: Tejun Heo
• Re: [PATCH] libata-pmp: clear hob for pmp register accesses
  • From: Tejun Heo
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Tejun Heo
• Re: What's needed for PMP support?
  • From: Mark Lord
• Re: What's needed for PMP support?
  • From: Mark Lord
• Re: [linux-pm] power_state: get rid of write-only variable in SATA
  • From: Pavel Machek
• Re: [PATCH] libata-pmp: clear hob for pmp register accesses
  • From: saeed bishara
• Re: JMicron - hard resetting link
  • From: Gabor FUNK
• [PATCH] libata-pmp: clear hob for pmp register accesses
  • From: Mark Lord
• [PATCH] ide: remove dead/obsolete ->busproc method
  • From: Bartlomiej Zolnierkiewicz
• Re: [linux-pm] power_state: get rid of write-only variable in SATA
  • From: David Brownell
• Re: Regression: kernel 2.6.24{,.1} ahci problem, does not boot (resend)
  • From: Malte Schröder
• Re: power_state: get rid of write-only variable in SATA
  • From: Jeff Garzik
• Re: What's needed for PMP support?
  • From: Mark Lord
• power_state: get rid of write-only variable in SATA
  • From: Pavel Machek
• Re: sata_sil24 not configuring drive right?
  • From: Johann-Christoph Jacob
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Holger Macht
• Re: sata_sil24 not configuring drive right?
  • From: Tejun Heo
• [PATCH] libata: automatically use DMADIR if drive/bridge requires it
  • From: Tejun Heo
• Re: What's needed for PMP support?
  • From: Tejun Heo
• Re: Regression: kernel 2.6.24{,.1} ahci problem, does not boot (resend)
  • From: Tejun Heo
• Re: [PATCH] scsi: align shost->hostdata to cacheline
  • From: Tejun Heo
• Re: sata_sil24 not configuring drive right?
  • From: Tejun Heo
• [PATCH] ide: remove hwif->straight8 flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH RFC] libata-core: do something about flush cache
  • From: Alan Cox
• Re: sata_sil24 not configuring drive right?
  • From: Johann-Christoph Jacob
• [PATCH 2/2] ide: remove IDE_HFLAG_CY82C693 host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide: fix enabling DMA on it821x in "smart" mode
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_sil24 not configuring drive right?
  • From: Johann-Christoph Jacob
• Re: [PATCH] falconide: fix resources reservation
  • From: Bartlomiej Zolnierkiewicz
• Re: What's needed for PMP support?
  • From: Mark Lord
• Re: [PATCH] libata-scsi: automatically use DMADIR if drive/bridge requires it
  • From: Mark Lord
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] libata: fix kernel-doc parameter warning
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: remove iounmap in mv_platform_remove and use devm_iomap
  • From: Jeff Garzik
• Re: [PATCH] libata-scsi: automatically use DMADIR if drive/bridge requires it
  • From: Jeff Garzik
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Jeff Garzik
• Re: [PATCH] ata: fix sparse warning in libata.h
  • From: Jeff Garzik
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Jeff Garzik
• Re: [PATCH 1/2] sata_mv: use hpriv->base instead of the host->iomap
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: Define module alias for platform device
  • From: Jeff Garzik
• Re: [PATCH 11/11v2] ata: fix sparse warnings in pata_legacy.c
  • From: Jeff Garzik
• Re: hdparm-8.2 now available
  • From: Mark Lord
• Re: hdparm-8.2 now available
  • From: Greg Freemyer
• Re: [PATCH] ide-generic: Fix no initalization of idx in some case
  • From: Bartlomiej Zolnierkiewicz
• Re: [BUG] next-20080219 - ide oops while bootup at ide_device_add_all ()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide-generic: Fix no initalization of idx in some case
  • From: Johann Felix Soden
• Re: PROBLEM: I/O scheduler problem with an 8 SATA disks raid 5 under heavy load ?
  • From: Guillaume Laurès
• Re: [PATCH] falconide: fix resources reservation
  • From: Geert Uytterhoeven
• [BUG] next-20080219 - ide oops while bootup at ide_device_add_all ()
  • From: Kamalesh Babulal
• Re: [discuss] pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• [PATCH] falconide: fix resources reservation
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ide-mpc8xx: fix resources reservation
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide-mpc8xx: make m8xx_ide_init_ports() return an error value
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] bast-ide: fix resources reservation
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] delkin_cb: fix resources handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide_platform: fix resources handling
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] sata_mv: remove iounmap in mv_platform_remove and use devm_iomap
  • From: Tejun Heo
• Re: Maxtor 7V300F0 on sil3114 VS Maxtor Atlas 15K2 on adaptec29160 strangeness
  • From: Christian Pernegger
• Re: Maxtor 7V300F0 on sil3114 VS Maxtor Atlas 15K2 on adaptec29160 strangeness
  • From: Christian Pernegger
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cd: remove the internal 64k buffer
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/12] ide: add ide-4drives host driver
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/5] ide-generic: use ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] libata: fix kernel-doc parameter warning
  • From: Randy Dunlap
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Pavel Machek
• Problem with ahci and a external sata disk
  • From: Jose Alberto Reguero
• Re: sata_sil24 stability and performance
  • From: Mark Lord
• Re: "ide=reverse" do we still need this?
  • From: Ken Moffat
• [PATCH] ide-cd: remove the internal 64k buffer
  • From: Borislav Petkov
• Re: [PATCH 03/12] ide: add ide-4drives host driver
  • From: Sergei Shtylyov
• Maxtor 7V300F0 on sil3114 VS Maxtor Atlas 15K2 on adaptec29160 strangeness
  • From: Christian Pernegger
• Re: [PATCH 4/5] ide-generic: use ide_find_port()
  • From: Sergei Shtylyov
• Re: [PATCH 4/4] ide-disk: fix issues found by checkpatch.pl
  • From: Sergei Shtylyov
• Re: [PATCH 1/4] ide: fix sparse warning about shadowing 'flags' symbol
  • From: Sergei Shtylyov
• Re: sata_sil24 stability and performance
  • From: Denys Dmytriyenko
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Borislav Petkov
• Re: sata_sil24 stability and performance
  • From: Jim Paris
• sata_sil24 stability and performance
  • From: Denys Dmytriyenko
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] next-20080218 build failure at pmac_ide_macio_attach ()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH ht6560b] Force prefetch for some devices
  • From: Bartlomiej Zolnierkiewicz
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ht6560b can only do up to PIO mode 4
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] libata-scsi: automatically use DMADIR if drive/bridge requires it
  • From: Mark Lord
• hdparm-8.2 now available
  • From: Mark Lord
• Re: [PATCH] libata-scsi: automatically use DMADIR if drive/bridge requires it
  • From: Alan Cox
• [PATCH] libata-scsi: automatically use DMADIR if drive/bridge requires it
  • From: Mark Lord
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Elias Oltmanns
• atapi_dmadir: why do we not (also) auto-detect it from IDENTIFY PACKET ??
  • From: Mark Lord
• Re: [PATCH] sata_mv: remove iounmap in mv_platform_remove and use devm_iomap
  • From: Mark Lord
• [PATCH-RESEND] next-20080218 build failure at pmac_ide_macio_attach ()
  • From: Kamalesh Babulal
• Re: [PATCH 1/5] ide: remove PIO "downgrade" quirk
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 8/9] qd65xx: return error value in qd_probe()
  • From: Sergei Shtylyov
• Re: [PATCH 1/5] ide: remove PIO "downgrade" quirk
  • From: Sergei Shtylyov
• [Bug 3615] Kernels 2.6.9 and 2.6.10-rc1 hang for 30 seconds during boot
  • From: bugme-daemon
• [PATCH] sata_mv: remove iounmap in mv_platform_remove and use devm_iomap
  • From: Saeed Bishara
• Re: [PATCH ht6560b] Force prefetch for some devices
  • From: Alan Cox
• Re: DMA on ht6560b?
  • From: Alan Cox
• Re: [PATCH 2/4] ide-disk: add missing printk() KERN_* levels
  • From: Sergei Shtylyov
• Re: [PATCH 1/4] ide: fix sparse warning about shadowing 'flags' symbol
  • From: Sergei Shtylyov
• Re: 2.6.25 Regression: DriveStatusError
  • From: Daniel Exner
• Re: [PATCH 7/9] ht6560b: use driver name for resource allocation
  • From: Sergei Shtylyov
• Re: [PATCH ht6560b] Force prefetch for some devices
  • From: Jan Evert van Grootheest
• Re: DMA on ht6560b?
  • From: Jan Evert van Grootheest
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Stefan Bader
• Re: [PATCH ht6560b] Force prefetch for some devices
  • From: Alan Cox
• Re: DMA on ht6560b?
  • From: Alan Cox
• Re: [PATCH] next-20080218 build failure at pmac_ide_macio_attach ()
  • From: Andreas Schwab
• DMA on ht6560b?
  • From: Jan Evert van Grootheest
• [PATCH] next-20080218 build failure at pmac_ide_macio_attach ()
  • From: Kamalesh Babulal
• [PATCH] ht6560b can only do up to PIO mode 4
  • From: Jan Evert van Grootheest
• Re: [PATCH ht6560b] Force prefetch for some devices
  • From: Sergei Shtylyov
• [PATCH ht6560b] Force prefetch for some devices
  • From: Jan Evert van Grootheest
• [Bug 3615] Kernels 2.6.9 and 2.6.10-rc1 hang for 30 seconds during boot
  • From: bugme-daemon
• Re: [PATCH 0/2] libata: implement 32-bit transfers for PIO mode
  • From: Willy Tarreau
• Re: [PATCH 2/2] libata: implement support for 32-bit PIO transfers
  • From: Alan Cox
• Re: [PATCH 0/2] libata: implement 32-bit transfers for PIO mode
  • From: Alan Cox
• [PATCH 2/2] libata: implement support for 32-bit PIO transfers
  • From: Willy Tarreau
• [PATCH 1/2] libata: implement ATA_IOC_GET_IO32/ATA_IOC_SET_IO32 ioctls
  • From: Willy Tarreau
• [PATCH 0/2] libata: implement 32-bit transfers for PIO mode
  • From: Willy Tarreau
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Mark Lord
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Greg Freemyer
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Richard Liu
• [PATCH 4/4] ide-disk: fix issues found by checkpatch.pl
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] ide-disk: add proc_idedisk_read_smart() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] ide-disk: add missing printk() KERN_* levels
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] ide: fix sparse warning about shadowing 'flags' symbol
  • From: Bartlomiej Zolnierkiewicz
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Mark Lord
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Mark Lord
• [PATCH 5/5] ide: unexport ide_hwifs[]
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/5] ide-generic: use ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/5] ide: use ide_find_port() in legacy VLB host drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/5] ide: merge ide_match_hwif() and ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/5] ide: remove PIO "downgrade" quirk
  • From: Bartlomiej Zolnierkiewicz
• Re: ICH7: ata_piix twice as fast as ahci?
  • From: Alan Cox
• Re: [PATCH 1/4] : More use DIV_ROUND_UP
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/12] ide: add ide-4drives host driver
  • From: Bartlomiej Zolnierkiewicz
• Re: PROBLEM: Corruption problems in pata_via for Via NanoBook owners (Cloudbook, EasyNote XS etc.)
  • From: Bartlomiej Zolnierkiewicz
• Re: ICH7: ata_piix twice as fast as ahci?
  • From: Joris
• [PATCH] falconide: locking bugfix
  • From: Bartlomiej Zolnierkiewicz
• Re: ICH7: ata_piix twice as fast as ahci?
  • From: Alan Cox
• ICH7: ata_piix twice as fast as ahci?
  • From: Joris
• Re: [PATCH] scsi_debug: disable clustering
  • From: James Bottomley
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Richard Liu
• Re: [PATCH] scsi_debug: disable clustering
  • From: FUJITA Tomonori
• Re: IDE cdrom problem
  • From: Borislav Petkov
• Re: [PATCH] scsi_debug: disable clustering
  • From: James Bottomley
• Re: DMA being disabled during heavy HD activity
  • From: Paul Fleischer
• Re: IDE cdrom problem
  • From: WaVeR
• DMA being disabled during heavy HD activity
  • From: Paul Fleischer
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Muli Ben-Yehuda
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• Re: IDE cdrom problem
  • From: Borislav Petkov
• [PATCH 9/9] ide: IDE_HFLAG_BOOTABLE -> IDE_HFLAG_NON_BOOTABLE
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/9] qd65xx: return error value in qd_probe()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/9] ht6560b: use driver name for resource allocation
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/9] umc8672: don't use ide_hwifs[] in umc_set_pio_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/9] scc_pata: store 'hwif' pointer in struct scc_ports
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/9] cmd640: use ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/9] cmd640: remove cmd_drives[]
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/9] au1xxx-ide: use ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/9] sgiioc4: use ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [Bug 8988] via82cxxx: SATA DVD-RW Pioneer DVR-212BK with CX700, system hangs
  • From: bugme-daemon
• [Bug 8988] via82cxxx: SATA DVD-RW Pioneer DVR-212BK with CX700, system hangs
  • From: bugme-daemon
• [Bug 5911] siimage.c interrupts screaming
  • From: bugme-daemon
• Re: IDE cdrom problem
  • From: WaVeR
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• [Bug 3615] Kernels 2.6.9 and 2.6.10-rc1 hang for 30 seconds during boot
  • From: bugme-daemon
• [Bug 10004] Smartd causes HSM violations on ata_piix
  • From: bugme-daemon
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Bartlomiej Zolnierkiewicz
• [Bug 4798] Error messages for hda when system is booting
  • From: bugme-daemon
• [Bug 10004] New: Smartd causes HSM violations on ata_piix
  • From: bugme-daemon
• [Bug 6745] kernel hangs when trying to read atip wiith cdrecord
  • From: bugme-daemon
• [Bug 6883] ide-probe.c attempts to use polling designed for ancient Seagate drives on some compact flash disks
  • From: bugme-daemon
• [Bug 7506] it821x: long wait time due to dma_timer_expiry
  • From: bugme-daemon
• [Bug 7553] growisofs trapped in "disk sleep" mode, after finishing writing a DVD
  • From: bugme-daemon
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Borislav Petkov
• [Bug 7971] Kernel complains about hard drive error, but mhdd program says there's no problem with hard drive.
  • From: bugme-daemon
• [Bug 8036] hdc: lost interrupt using some compact flash as ide disk
  • From: bugme-daemon
• [Bug 8988] via82cxxx: SATA DVD-RW Pioneer DVR-212BK with CX700, system hangs
  • From: bugme-daemon
• [Bug 9994] atiixp ide timeouts
  • From: bugme-daemon
• Re: IDE cdrom problem
  • From: Borislav Petkov
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Bartlomiej Zolnierkiewicz
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Borislav Petkov
• Re: [PATCH 5/13] cy82c693: add ->set_dma_mode method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] ide-pmac: use ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide-pmac: dynamically allocate struct pmac_ide_hwif instances
  • From: Bartlomiej Zolnierkiewicz
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/12] ide: add ide-4drives host driver
  • From: Randy Dunlap
• Re: IDE cdrom problem
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] sata_mv: Define module alias for platform device
  • From: Mark Lord
• [PATCH] sata_mv: Define module alias for platform device
  • From: Martin Michlmayr
• Re: IDE cdrom problem
  • From: Borislav Petkov
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Borislav Petkov
• [PATCH 12/12] ide: cleanup ide_find_port()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/12] ide: cleanup ide_match_hwif()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/12] ide: remove ide_init_default_irq() macro
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/12] ide: move default IDE ports setup to ide_generic host driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/12] ide: remove needless hwif->irq check from ide_hwif_configure()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/12] ide: init hwif->{io_ports,irq} explicitly in legacy VLB host drivers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/12] ide: limit legacy VLB host drivers to alpha, x86 and mips
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/12] cmd640: init hwif->{io_ports,irq} explicitly
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/12] cmd640: cleanup setup_device_ptrs()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/12] ide: add ide-4drives host driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/12] ide: remove ppc ifdef from init_ide_data()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/12] ide: remove ide_default_io_ctl() macro
  • From: Bartlomiej Zolnierkiewicz
• hdparm-8.1 now available
  • From: Mark Lord
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Mark Lord
• [PATCH 1/4] : More use DIV_ROUND_UP
  • From: Julia Lawall
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Bartlomiej Zolnierkiewicz
• Re: [BUID_FAILURE] next-20080215 Build failure caused by ide: rework PowerMac media-bay support
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] MAINTAINERS: update ide-cd maintainer's email address
  • From: Bartlomiej Zolnierkiewicz
• Re: ST310211A and HPA ( was Re: Bug#401035: linux-image-2.6-686 - another misbehaving Seagate )
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Mark Lord
• Re: Spurious completions during NCQ
  • From: Mark Lord
• Re: [PATCH 1/2] sata_mv: use hpriv->base instead of the host->iomap
  • From: Mark Lord
• Re: [PATCH 2/2] sata_mv: remove iounmap in mv_platform_remove
  • From: Martin Michlmayr
• Re: Optiarc DVD RW AD-5200A audio playing
  • From: Borislav Petkov
• [PATCH] MAINTAINERS: update ide-cd maintainer's email address
  • From: Borislav Petkov
• Re: [PATCH 5/11v2] ata: replace macro with static inline in libata.h
  • From: Harvey Harrison
• Re: [PATCH 5/11v2] ata: replace macro with static inline in libata.h
  • From: Harvey Harrison
• Re: [PATCH 5/11v2] ata: replace macro with static inline in libata.h
  • From: Alan Cox
• Re: [PATCH 5/11v2] ata: replace macro with static inline in libata.h
  • From: Harvey Harrison
• Re: [PATCH 5/11v2] ata: replace macro with static inline in libata.h
  • From: Alan Cox
• Re: [PATCH 5/11v2] ata: replace macro with static inline in libata.h
  • From: Harvey Harrison
• Re: [PATCH 5/11v2] ata: replace macro with static inline in libata.h
  • From: Alan Cox
• Re: [PATCH] ata: fix sparse warning in libata.h
  • From: Tejun Heo
• [PATCH 5/11v2] ata: replace macro with static inline in libata.h
  • From: Harvey Harrison
• Re: [RFC-UGLYPATCH] ata: small optimization in linux/libata.h
  • From: Christer Weinigel
• [PATCH] ata: fix sparse warning in libata.h
  • From: Harvey Harrison
• [PATCH] ata: fix sparse warnings in pata_legacy.c
  • From: Harvey Harrison
• Re: [PATCH 1/3] ata: make ata_scsiop_inq_89 static in libata-scsi.c
  • From: Harvey Harrison
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] scsi: align shost->hostdata to cacheline
  • From: James Bottomley
• Re: [PATCH 06/11] ata: sparse fixes for pata_amd.c
  • From: Jeff Garzik
• Re: [PATCH] pata_scc.c: add thaw ops
  • From: Jeff Garzik
• Re: [libata-dev #upstream-fixes] pata_legacy: don't call ata_host_detach() after initialization failure
  • From: Jeff Garzik
• Re: [PATCH] pata_cs5536.c bugfix
  • From: Jeff Garzik
• Re: [PATCH 01/11] ata: fix sparse warning in ata_piix.c
  • From: Jeff Garzik
• Re: [PATCH 1/3] ata: make ata_scsiop_inq_89 static in libata-scsi.c
  • From: Jeff Garzik
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: [PATCH] SCSI: fix data corruption caused by ses v2
  • From: Yinghai Lu
• Re: Regression: kernel 2.6.24{,.1} ahci problem, does not boot (resend)
  • From: Malte Schröder
• [BUID_FAILURE] next-20080215 Build failure caused by ide: rework PowerMac media-bay support
  • From: Kamalesh Babulal
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Mark Lord
• Re: [RFC-UGLYPATCH] ata: small optimization in linux/libata.h
  • From: Jeff Garzik
• Re: [PATCH] SCSI: fix data corruption caused by ses v2
  • From: James Bottomley
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: yong xue
• Re: Spurious completions during NCQ
  • From: Michael Tokarev
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Sam Ravnborg
• Re: Spurious completions during NCQ
  • From: Hugo Mills
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: Spurious completions during NCQ
  • From: Calvin Walton
• Re: [PATCH 0/4] ide: generic packet command representation
  • From: Alan Cox
• Re: [PATCH 09/11] ata: fix sparse warning in pata_marvell.c
  • From: Jan Engelhardt
• Spurious completions during NCQ
  • From: Hugo Mills
• Re: [PATCH 0/4] ide: generic packet command representation
  • From: Jan Engelhardt
• Re: "ide=reverse" do we still need this?
  • From: Matthew Wilcox
• [Bug 8006] a likely logging error in "cdrom/sbpcd.c"
  • From: bugme-daemon
• Re: 2.6.26-git0: IDE oops during boot
  • From: Kamalesh Babulal
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Borislav Petkov
• Re: [RFC-UGLYPATCH] ata: small optimization in linux/libata.h
  • From: Mikael Pettersson
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Muli Ben-Yehuda
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: [discuss] pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• [Bug 8006] a likely logging error in "cdrom/sbpcd.c"
  • From: bugme-daemon
• Fwd: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Richard Liu
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Tejun Heo
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Andrew Morton
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Tejun Heo
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Andrew Morton
• Re: [RFC-UGLYPATCH] ata: small optimization in linux/libata.h
  • From: Tejun Heo
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Tejun Heo
• [Bug 9994] atiixp ide timeouts
  • From: bugme-daemon
• [Bug 9994] New: atiixp ide timeouts
  • From: bugme-daemon
• Re: [RFC-UGLYPATCH] ata: small optimization in linux/libata.h
  • From: Harvey Harrison
• Re: linux-next: first tree
  • From: Stephen Rothwell
• Re: [RFC-UGLYPATCH] ata: small optimization in linux/libata.h
  • From: Tejun Heo
• Re: Regression: kernel 2.6.24{,.1} ahci problem, does not boot (resend)
  • From: Tejun Heo
• Re: JMicron - hard resetting link
  • From: Tejun Heo
• Re: JMicron - hard resetting link
  • From: Gabor FUNK
• Re: [PATCH] scsi: align shost->hostdata to cacheline
  • From: Tejun Heo
• Re: [PATCH] PCI subsystem: AMD SATA IDE mode quirk
  • From: Jeff Garzik
• Re: linux-next: first tree
  • From: Jeff Garzik
• Re: linux-next: first tree
  • From: James Bottomley
• Re: [PATCH 1/2] ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS
  • From: Sam Ravnborg
• Re: [PATCH 1/2] ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS
  • From: Bartlomiej Zolnierkiewicz
• Re: linux-next: first tree
  • From: Jeff Garzik
• Re: linux-next: first tree
  • From: Jeff Garzik
• Re: [PATCH 1/2] ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS
  • From: Sam Ravnborg
• Re: [PATCH 05/11] ppc/mpc8xx: remove ppc_ide_md hooks
  • From: Vitaly Bordug
• [PATCH 2/2] ide: remove CONFIG_IDE_ARCH_OBSOLETE_INIT
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] ide: add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS
  • From: Bartlomiej Zolnierkiewicz
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Mark Lord
• Re: [PATCH 2/2] sata_mv: remove iounmap in mv_platform_remove
  • From: Mark Lord
• [RFC-UGLYPATCH] ata: small optimization in linux/libata.h
  • From: Harvey Harrison
• [PATCH 3/3] ata: simplify clock divisor logic in pata_amd.c
  • From: Harvey Harrison
• [PATCH 2/3] ata: fix sparse warning in libata-core.c
  • From: Harvey Harrison
• [PATCH 1/3] ata: make ata_scsiop_inq_89 static in libata-scsi.c
  • From: Harvey Harrison
• Re: [PATCH 2/2] sata_mv: remove iounmap in mv_platform_remove
  • From: saeed bishara
• Re: ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Greg Freemyer
• ST31000340NS (1000G) Capacity equal 33MB issue.
  • From: Richard Liu
• [PATCH 05/11v2] ata: replace macro with static inline in libata.h
  • From: Harvey Harrison
• Re: [PATCH 11/11v2] ata: fix sparse warnings in pata_legacy.c
  • From: Alan Cox
• Re: [PATCH 05/11] ata: replace macro with static inline in libata.h
  • From: Harvey Harrison
• Regression: kernel 2.6.24{,.1} ahci problem, does not boot (resend)
  • From: Malte Schröder
• [PATCH 11/11v2] ata: fix sparse warnings in pata_legacy.c
  • From: Harvey Harrison
• Re: "ide=reverse" do we still need this?
  • From: Bill Davidsen
• Re: [PATCH 2/2] sata_mv: remove iounmap in mv_platform_remove
  • From: Mark Lord
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Mark Lord
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Mark Lord
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• Re: "mount: could not find filesystem" - aacraid? (was: Re: 2.6.26-git0: IDE oops during boot)
  • From: James Bottomley
• Re: [PATCH] scsi: align shost->hostdata to cacheline
  • From: James Bottomley
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Boris Petkov
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Sergei Shtylyov
• Re: [PATCH 2/2] sata_mv: remove iounmap in mv_platform_remove
  • From: saeed bishara
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Holger Macht
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Holger Macht
• [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Holger Macht
• Re: [PATCH] ide-floppy: merge callbacks
  • From: Bartlomiej Zolnierkiewicz
• Re: [discuss] pci_get_device_reverse(), why does Calgary need this?
  • From: Bartlomiej Zolnierkiewicz
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 11/11] ata: fix sparse warnings in pata_legacy.c
  • From: Alan Cox
• Re: [PATCH 05/11] ata: replace macro with static inline in libata.h
  • From: Alan Cox
• Re: "mount: could not find filesystem" - aacraid? (was: Re: 2.6.26-git0: IDE oops during boot)
  • From: Bartlomiej Zolnierkiewicz
• "mount: could not find filesystem" - aacraid? (was: Re: 2.6.26-git0: IDE oops during boot)
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.26-git0: IDE oops during boot
  • From: Yinghai Lu
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Hans-Peter Jansen
• [PATCH] scsi: align shost->hostdata to cacheline
  • From: Tejun Heo
• Re: 2.6.26-git0: IDE oops during boot
  • From: Kamalesh Babulal
• [PATCH] libata: align ap->sector_buf to cacheline
  • From: Tejun Heo
• Re: [discuss] pci_get_device_reverse(), why does Calgary need this?
  • From: Andreas Jaeger
• Re: [PATCH] ide-floppy: merge callbacks
  • From: Borislav Petkov
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Borislav Petkov
• sparse patches for libata
  • From: Harvey Harrison
• [PATCH 02/11] ata: fix sparse warning in sata_promise.c
  • From: Harvey Harrison
• [PATCH 11/11] ata: fix sparse warnings in pata_legacy.c
  • From: Harvey Harrison
• [PATCH 10/11] ata: fix sparse warning in pata_acpi.c
  • From: Harvey Harrison
• [PATCH 09/11] ata: fix sparse warning in pata_marvell.c
  • From: Harvey Harrison
• [PATCH 08/11] ata: fix sparse warning in pata_jmicron.c
  • From: Harvey Harrison
• [PATCH 07/11] ata: fix sparse warning in pata_cs5536.c
  • From: Harvey Harrison
• [PATCH 06/11] ata: sparse fixes for pata_amd.c
  • From: Harvey Harrison
• [PATCH 05/11] ata: replace macro with static inline in libata.h
  • From: Harvey Harrison
• [PATCH 04/11] ata: fix sparse warnings in sata_mv.c
  • From: Harvey Harrison
• [PATCH 03/11] ata: fix sparse warning in sata_via.c
  • From: Harvey Harrison
• [PATCH 01/11] ata: fix sparse warning in ata_piix.c
  • From: Harvey Harrison
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: libata/sata_sil24 cache alignment problem?
  • From: Tejun Heo
• Re: [PATCH] pata_scc.c: add thaw ops
  • From: Tejun Heo
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Tejun Heo
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Andrew Morton
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Tejun Heo
• Re: libata/sata_sil24 cache alignment problem?
  • From: Alan Cox
• [PATCH 11/11] ppc/pmac: remove no longer needed IDE quirk
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/11] ppc: don't include <linux/ide.h>
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/11] ppc: remove ppc_ide_md
  • From: Bartlomiej Zolnierkiewicz
• [Bug 9962] mount: could not find filesystem
  • From: bugme-daemon
• [PATCH 08/11] ppc/pplus: remove ppc_ide_md.ide_init_hwif hook
  • From: Bartlomiej Zolnierkiewicz
• [Bug 9962] mount: could not find filesystem
  • From: bugme-daemon
• [PATCH 07/11] ppc/sandpoint: remove ppc_ide_md hooks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/11] ppc/lopec: remove ppc_ide_md hooks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/11] ppc/mpc8xx: remove ppc_ide_md hooks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/11] ppc/pmac: remove ppc_ide_md hooks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/11] ppc/ppc4xx: remove ppc_ide_md hooks
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 02/11] ppc/hdpu: remove dead IDE code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/11] ide-pmac: remove dead code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/11] ide/ppc: remove PPC specific IDE hacks
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Tejun Heo
• [PATCH] SCSI: fix data corruption caused by ses v2
  • From: Yinghai Lu
• [Bug 9962] 2.6.26-git0: IDE oops during boot
  • From: bugme-daemon
• [Bug 9962] 2.6.26-git0: IDE oops during boot
  • From: bugme-daemon
• Re: [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Andrew Morton
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] SCSI: fix data corruption caused by ses
  • From: Yinghai Lu
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Hans-Peter Jansen
• Re: [PATCH] SCSI: fix data corruption caused by ses
  • From: James Bottomley
• [Bug 9962] 2.6.26-git0: IDE oops during boot
  • From: bugme-daemon
• Re: 2.6.26-git0: IDE oops during boot
  • From: Bartlomiej Zolnierkiewicz
• Re: "ide=reverse" do we still need this?
  • From: Michael Ellerman
• [Bug 9962] 2.6.26-git0: IDE oops during boot
  • From: bugme-daemon
• [Bug 9962] New: 2.6.26-git0: IDE oops during boot
  • From: bugme-daemon
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-floppy: merge callbacks
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide: use generic ATAPI packet command flags in ide-{floppy,tape}
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] ide-scsi: do non-atomic pc->flags testing
  • From: Bartlomiej Zolnierkiewicz
• Re: libata/sata_sil24 cache alignment problem?
  • From: Mark Mason
• [PATCH] ide-floppy: merge callbacks
  • From: Borislav Petkov
• Re: [discuss] "ide=reverse" do we still need this?
  • From: Greg KH
• Re: libata/sata_sil24 cache alignment problem?
  • From: Alan Cox
• Re: [discuss] "ide=reverse" do we still need this?
  • From: Dirk GOUDERS
• Re: [PATCH 2/2] sata_mv: remove iounmap in mv_platform_remove
  • From: Mark Lord
• [PATCH 2/2] sata_mv: remove iounmap in mv_platform_remove
  • From: Saeed Bishara
• [PATCH 1/2] sata_mv: use hpriv->base instead of the host->iomap
  • From: Saeed Bishara
• Re: libata/sata_sil24 cache alignment problem?
  • From: Mark Mason
• Re: libata/sata_sil24 cache alignment problem?
  • From: Mark Mason
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Kristen Carlson Accardi
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Muli Ben-Yehuda
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• [PATCH 2/2] ide-scsi: do non-atomic pc->flags testing
  • From: Borislav Petkov
• [PATCH 1/2] ide: use generic ATAPI packet command flags in ide-{floppy,tape}
  • From: Borislav Petkov
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Smart
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH 1/2] ide: use generic ATAPI packet command flags in ide-{floppy,tape,scsi}
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Mark Lord
• [PATCH 2/2] ide-scsi: do non-atomic pc->flags testing
  • From: Borislav Petkov
• [PATCH 1/2] ide: use generic ATAPI packet command flags in ide-{floppy,tape,scsi}
  • From: Borislav Petkov
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Smart
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: "ide=reverse" do we still need this?
  • From: Ken Moffat
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Smart
• Re: [RFC PATCH] ide-floppy: use rq->cmd for preparing and sending packet cmds to the drive
  • From: Bartlomiej Zolnierkiewicz
• Re: [BUG] 2.6.24-mm1 and 2.6.24-git13 kernel panic's while bootup at ide_device_add_all
  • From: Kamalesh Babulal
• Re: [RFC PATCH] ide-floppy: use rq->cmd for preparing and sending packet cmds to the drive
  • From: Borislav Petkov
• Re: "ide=reverse" do we still need this?
  • From: Rene Herman
• Re: "ide=reverse" do we still need this?
  • From: Rene Herman
• Re: [BUG] 2.6.24-mm1 and 2.6.24-git13 kernel panic's while bootup at ide_device_add_all
  • From: Rafael J. Wysocki
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 09/18] ide: rework PowerMac media-bay support
  • From: Bartlomiej Zolnierkiewicz
• Re: "ide=reverse" do we still need this?
  • From: Michael Ellerman
• Re: "ide=reverse" do we still need this?
  • From: Rene Herman
• Re: [PATCH] PCI subsystem: AMD SATA IDE mode quirk
  • From: Jeff Garzik
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• Re: sil3114 corruptions (was: Re: [PATCH 3/3] faster workaround)
  • From: Tejun Heo
• sil3114 corruptions (was: Re: [PATCH 3/3] faster workaround)
  • From: Bernd Schubert
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Gabriel Paubert
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Muli Ben-Yehuda
• Re: Subject: [PATCH 1/3] Let scsi_cmnd->cmnd use request->cmd buffer
  • From: Boaz Harrosh
• Re: [libata-dev #upstream-fixes] pata_legacy: don't call ata_host_detach() after initialization failure
  • From: Ingo Molnar
• [libata-dev #upstream-fixes] pata_legacy: don't call ata_host_detach() after initialization failure
  • From: Tejun Heo
• [PATCH 5/5] libata: make libata use printk_header() and mprintk
  • From: Tejun Heo
• [PATCH 4/5] printk: add Documentation/printk.txt
  • From: Tejun Heo
• [PATCH 2/5] printk: implement [v]printk_header()
  • From: Tejun Heo
• [PATCH 3/5] printk: implement merging printk
  • From: Tejun Heo
• [PATCH 1/5] printk: keep log level on multiline messages
  • From: Tejun Heo
• [PATCHSET] printk: implement printk_header() and merging printk, take #3
  • From: Tejun Heo
• Re: [discuss] "ide=reverse" do we still need this?
  • From: Dirk GOUDERS
• RE: [PATCH] PCI subsystem: AMD SATA IDE mode quirk
  • From: Cai, Crane
• Re: [discuss] "ide=reverse" do we still need this?
  • From: Greg KH
• Re: [discuss] "ide=reverse" do we still need this?
  • From: Dirk GOUDERS
• Re: [PATCH 09/18] ide: rework PowerMac media-bay support
  • From: Michael Ellerman
• [PATCH] SCSI: fix data corruption caused by ses
  • From: Yinghai Lu
• [PATCH] pata_cs5536.c bugfix
  • From: Martin K. Petersen
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• Re: "ide=reverse" do we still need this?
  • From: Greg KH
• Re: "ide=reverse" do we still need this?
  • From: Greg KH
• [PATCH] pata_scc.c: add thaw ops
  • From: Akira Iguchi
• Re: "ide=reverse" do we still need this?
  • From: Ken Moffat
• Re: libata/sata_sil24 cache alignment problem?
  • From: James Bottomley
• Re: pci_get_device_reverse(), why does Calgary need this?
  • From: Alan Cox
• Re: libata/sata_sil24 cache alignment problem?
  • From: Alan Cox
• Re: "ide=reverse" do we still need this?
  • From: Rene Herman
• pci_get_device_reverse(), why does Calgary need this?
  • From: Greg KH
• "ide=reverse" do we still need this?
  • From: Greg KH
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Tejun Heo
• Re: [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations, take #2
  • From: Tejun Heo
• Re: [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations, take #2
  • From: Akira Iguchi
• Re: JMicron - hard resetting link
  • From: Tejun Heo
• Re: libata/sata_sil24 cache alignment problem?
  • From: James Bottomley
• Re: libata/sata_sil24 cache alignment problem?
  • From: Thomas Evans
• Re: libata/sata_sil24 cache alignment problem?
  • From: Alan Cox
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Benjamin Herrenschmidt
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Alan Cox
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Bartlomiej Zolnierkiewicz
• Re: [RFC PATCH] ide-floppy: use rq->cmd for preparing and sending packet cmds to the drive
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-scsi: do non-atomic pc->flags testing
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-floppy: rename end_request handler properly
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Benjamin Herrenschmidt
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Benjamin Herrenschmidt
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Luben Tuikov
• Re: Subject: [PATCH 1/3] Let scsi_cmnd->cmnd use request->cmd buffer
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Kristen Carlson Accardi
• Re: Open bugs
  • From: Natalie Protasevich
• libata/sata_sil24 cache alignment problem?
  • From: Mark Mason
• Re: [PATCH] enclosure: add support for enclosure services
  • From: James Bottomley
• Re: [PATCH] enclosure: add support for enclosure services
  • From: Kristen Carlson Accardi
• Re: [PATCH 3/3] scsi: varlen extended and vendor-specific cdbs
  • From: Boaz Harrosh
• Re: Subject: [PATCH 1/3] Let scsi_cmnd->cmnd use request->cmd buffer
  • From: Boaz Harrosh
• Re: [PATCH 2/3] block layer varlen-cdb
  • From: Boaz Harrosh
• Re: Open bugs
  • From: James Bottomley
• Re: [PATCH 2/3] block layer varlen-cdb
  • From: Boaz Harrosh
• Re: [PATCH 3/3] scsi: varlen extended and vendor-specific cdbs
  • From: Christoph Hellwig
• Re: [PATCH 2/3] block layer varlen-cdb
  • From: Christoph Hellwig
• Re: Subject: [PATCH 1/3] Let scsi_cmnd->cmnd use request->cmd buffer
  • From: Christoph Hellwig
• Re: JMicron - hard resetting link
  • From: Gabor FUNK
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Borislav Petkov
• [PATCH] ide-scsi: do non-atomic pc->flags testing
  • From: Borislav Petkov
• Re: JMicron - hard resetting link
  • From: Tejun Heo
• Re: JMicron - hard resetting link
  • From: Gabor FUNK
• [RFC PATCH] ide-floppy: use rq->cmd for preparing and sending packet cmds to the drive
  • From: Borislav Petkov
• [PATCH] ide-floppy: rename end_request handler properly
  • From: Borislav Petkov
• How to verify sht-ops-conversion patch doesn't change anything
  • From: Tejun Heo
• Re: JMicron - hard resetting link
  • From: Tejun Heo
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Tejun Heo
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Gabriel Paubert
• Re: [PATCH 00/18] ide: warm-plug support for IDE devices and other goodies
  • From: Gabriel Paubert
• JMicron - hard resetting link
  • From: Gabor FUNK
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Elias Oltmanns
• IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Hans-Peter Jansen
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Tejun Heo
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Tejun Heo
• Re: 2.6.26-git0: IDE oops during boot
  • From: Kamalesh Babulal
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Elias Oltmanns
• [PATCH 06/10] libata: implement and use ops inheritance
  • From: Tejun Heo
• [PATCH 10/10] libata: make reset related methods proper port operations
  • From: Tejun Heo
• [PATCH 05/10] libata: implement and use SHT initializers
  • From: Tejun Heo
• [PATCH 07/10] libata: make ata_pci_init_one() not use ops->irq_handler and pi->sht
  • From: Tejun Heo
• [PATCH 08/10] libata: stop overloading port_info->private_data
  • From: Tejun Heo
• [PATCH 09/10] libata: kill port_info->sht and ->irq_handler
  • From: Tejun Heo
• [PATCH 03/10] libata: implement and use ata_noop_irq_clear()
  • From: Tejun Heo
• [PATCH 02/10] libata: reorganize ata_port_operations
  • From: Tejun Heo
• [PATCH 01/10] libata: PCI device should be powered up before being accessed
  • From: Tejun Heo
• [PATCH 04/10] libata: normalize port_info, port_operations and sht tables
  • From: Tejun Heo
• [PATCHSET libata-dev#upstream] clean up scsi_host_templates and ata_port_operations, take #2
  • From: Tejun Heo
• Open bugs
  • From: Natalie Protasevich
• Re: [PATCH 0/4] ide: generic packet command representation
  • From: Borislav Petkov
• Re: 2.6.24 found 5 exceptions in dmesg after not using the system for while
  • From: Tejun Heo
• Re: sata_mv: problems using it as a platform_driver
  • From: Tejun Heo
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Tejun Heo
• Re: [PATCH #upstream] libata: implement libata.force module parameter
  • From: Tejun Heo
• Re: [PATCH] ide: Add missing base addresses for falconide and macide
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/4] ide: generic packet command representation
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] ide-tape: remove atomic test/set macros for packet commands
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide-tape: move all struct and other defs at the top
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3 2.6.24-git] ARM/RPC: Use HAVE_PATA_PLATFORM to select pata platform driver
  • From: Ben Dooks
• Re: [PATCH 0/3 2.6.24-git] Add HAVE_PLATFORM_PATA Kconfig
  • From: Ben Dooks
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Tejun Heo
• Re: [PATCH 5/7] block: clear drain buffer if draining for write command
  • From: James Bottomley
• [PATCH] fix swim3.c modular build
  • From: Kyle McMartin
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Elias Oltmanns
• [PATCH] ide: Add missing base addresses for falconide and macide
  • From: Geert Uytterhoeven
• Re: [SCSI] ses: fix memory leaks
  • From: Yinghai Lu
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: 2.6.25 Regression: DriveStatusError
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] sata_mv: platform driver allocs dma without create
  • From: Jeff Garzik
• Re: [PATCH] pata_ninja32: setup changes
  • From: Jeff Garzik
• Re: [PATCH] pata_legacy: typo fix
  • From: Jeff Garzik
• Re: [PATCH] pata_amd: Note in the module description it handles Nvidia
  • From: Jeff Garzik
• Re: [PATCH] sata_mv: fix loop with last port
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: ignore deverr on SETXFER if mode is configured
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] pata_via: fix SATA cable detection on cx700
  • From: Jeff Garzik
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH #upstream] libata: make EH fail gracefully if no reset method is available
  • From: Jeff Garzik
• Re: [PATCH 1/9] libata: PCI device should be powered up before being accessed
  • From: Jeff Garzik
• Re: 2.6.26-git0: IDE oops during boot
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Prevent IDE boot ops on NUMA system in mainline
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Russell King
• Re: [PATCH] Prevent IDE boot ops on NUMA system in mainline
  • From: Andi Kleen
• Re: [PATCH] Prevent IDE boot ops on NUMA system in mainline
  • From: Andi Kleen
• Re: [PATCH] Prevent IDE boot ops on NUMA system in mainline
  • From: Linus Torvalds
• Re: [PATCH] Prevent IDE boot ops on NUMA system in mainline
  • From: Linus Torvalds
• Re: [SCSI] ses: fix memory leaks
  • From: James Bottomley
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Sergei Shtylyov
• Re: [SCSI] ses: fix memory leaks
  • From: James Bottomley
• Re: [PATCH] ide: remove stale comment from ide-lib.c
  • From: Sergei Shtylyov
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Holger Macht
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Tejun Heo
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Atsushi Nemoto
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Alan Cox
• Re: sata_mv: problems using it as a platform_driver
  • From: Saeed Bishara
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Alan Cox
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Holger Macht
• Re: sata_mv: problems using it as a platform_driver
  • From: Saeed Bishara
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Alan Cox
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Tejun Heo
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Tejun Heo
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Holger Macht
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Holger Macht
• 2.6.25 Regression: DriveStatusError
  • From: Daniel Exner
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Tejun Heo
• [PATCH 3/4] ide-tape: convert driver to using generic ide_atapi_pc
  • From: Borislav Petkov
• [PATCH 4/4] ide-scsi: convert driver to using generic ide_atapi_pc
  • From: Borislav Petkov
• [PATCH 2/4] ide-floppy: convert driver to using generic ide_atapi_pc
  • From: Borislav Petkov
• [PATCH 1/4] ide: add generic packet command representation ide_atapi_pc
  • From: Borislav Petkov
• [PATCH 0/4] ide: generic packet command representation
  • From: Borislav Petkov
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Elias Oltmanns
• Re: 2.6.26-git0: IDE oops during boot
  • From: Kamalesh Babulal
• [SCSI] ses: fix memory leaks
  • From: Yinghai Lu
• Re: [PATCH] scsi: ses fix mem leaking when fail to add intf
  • From: Yinghai Lu
• Re: Current qc_defer implementation may lead to infinite recursion
  • From: Tejun Heo
• Re: [PATCH] scsi: ses fix mem leaking when fail to add intf
  • From: James Bottomley
• Re: [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Tejun Heo
• [PATCH] Prevent IDE boot ops on NUMA system in mainline
  • From: Andi Kleen
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: remove stale comment from ide-lib.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: fix comment in init_irq()
  • From: Bartlomiej Zolnierkiewicz
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/8] ide: add struct ide_port_info instances to legacy host drivers
  • From: Bartlomiej Zolnierkiewicz
• Re: is there a value to CONFIG_NO_ATA_LEGACY?
  • From: Robert P. J. Day
• Re: is there a value to CONFIG_NO_ATA_LEGACY?
  • From: Alan Cox
• Re: 2.6.26-git0: IDE oops during boot
  • From: Nish Aravamudan
• Re: (fwd) Bug#11922: I/O error on blank tapes
  • From: Kai Makisara
• [PATCH] sata_mv: platform driver allocs dma without create
  • From: Byron Bradley
• RE: About forcing 32bit DMA patch for AMD690G(SB600)
  • From: Srihari Vijayaraghavan
• [PATCH] libata: Forcing PIO0 mode on reset must not freeze system
  • From: Holger Macht
• Re: Current git --> kaboom [bisect] seems IDE related.
  • From: Sebastian Siewior
• is there a value to CONFIG_NO_ATA_LEGACY?
  • From: Robert P. J. Day
• [PATCH 3/3] scsi: varlen extended and vendor-specific cdbs
  • From: Boaz Harrosh