Linux IDE Archive

• Thread Index

• Re: [PATCH 5/7] ide: export ide_allocate_dma_engine()
  • From: Sergei Shtylyov
• Re: [PATCH 4/7] ide: move ide_setup_dma() call out from ->init_dma method
  • From: Sergei Shtylyov
• Re: [PATCH 1/7] ide: don't display "BIOS" settings in ide_setup_dma()
  • From: Sergei Shtylyov
• [Bug 9994] atiixp ide timeouts
  • From: bugme-daemon
• [Bug 9994] atiixp ide timeouts
  • From: bugme-daemon
• [Bug 9994] atiixp ide timeouts
  • From: bugme-daemon
• 2.6.24.X: SATA/AHCI related boot delay.
  • From: Volker Armin Hemmann
• Re: [PATCH 4/4] ide: add struct ide_port_ops
  • From: Sergei Shtylyov
• Re: SATA HDD password problem
  • From: Rus V. Brushkoff
• [PATCH 2/4] ide-tape: remove pipeline-specific code from idetape_add_chrdev_write_request
  • From: Borislav Petkov
• [PATCH 4/4] ide-tape: remove pipeline-specific code from idetape_add_chrdev_read_request()
  • From: Borislav Petkov
• [PATCH 1/4] ide-tape: remove tape->cache_stage
  • From: Borislav Petkov
• [PATCH 0/4] ide-tape: remove pipeline functionality-v2
  • From: Borislav Petkov
• [PATCH 3/4] ide-tape remove pipeline speed/control calculations
  • From: Borislav Petkov
• Re: [PATCH 4/4] ide: constify struct ide_dma_ops
  • From: Sergei Shtylyov
• [PATCH 3/4] ide: add struct ide_dma_ops
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/4] ide: constify struct ide_dma_ops
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] ide: add IDE_HFLAG_SERIALIZE_DMA host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] sl82c105: check bridge revision in sl82c105_init_one()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/7] sgiioc4: use ->init_dma method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/7] palm_bk3710: use ->init_dma method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/7] au1xxx-ide: use ->init_dma method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/7] icside: use ->init_dma method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/7] ide-pmac: use ->init_dma method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/7] ide: do complete DMA setup in ->init_dma method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/7] au1xxx-ide: fix MWDMA support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH #upstream-fixes] libata: don't allow sysfs read access to force param
  • From: Tejun Heo
• Re: [Regression] 2.6.25-rc4-git3: Handling of audio CDs broken on pata_ali
  • From: Andrey Borzenkov
• Re: Frequent ATA errors
  • From: Tejun Heo
• Re: Problem with ahci and a external sata disk
  • From: Tejun Heo
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Tejun Heo
• Re: SATA HDD password problem
  • From: Tejun Heo
• Re: SATA HDD password problem
  • From: Tejun Heo
• 2.6.25-rc4 IDE BUG()
  • From: George Spelvin
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Guennadi Liakhovetski
• [Regression] 2.6.25-rc4-git3: Handling of audio CDs broken on pata_ali
  • From: Rafael J. Wysocki
• [PATCH 7/7] ide: cleanup ide_setup_dma()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/7] ide: move ide_setup_dma() call out from ->init_dma method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/7] ide: factor out setting PCI bus-mastering from ide_hwif_setup_dma()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/7] ide: export ide_allocate_dma_engine()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/7] alim15x3: skip DMA initialization completely on revs < 0x20
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/7] pdc202xx_old: remove init_dma_pdc202xx()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/7] ide: don't display "BIOS" settings in ide_setup_dma()
  • From: Bartlomiej Zolnierkiewicz
• Re: SATA HDD password problem
  • From: Rus V. Brushkoff
• Re: Problem with ahci and a external sata disk
  • From: Jose Alberto Reguero
• Re: Problem with ahci and a external sata disk
  • From: Jose Alberto Reguero
• Re: SATA HDD password problem
  • From: Tejun Heo
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Tejun Heo
• Re: SATA HDD password problem
  • From: Tejun Heo
• Re: Problem with ahci and a external sata disk
  • From: Tejun Heo
• Re: Commit 9f10d9ee breaks CD mounting/burning
  • From: Rafael J. Wysocki
• Re: [RFC] Disk shock protection (revisited)
  • From: Alan Cox
• Re: Problem with ahci and a external sata disk
  • From: Jose Alberto Reguero
• Re: Commit 9f10d9ee breaks CD mounting/burning
  • From: Bartlomiej Zolnierkiewicz
• Re: Commit 9f10d9ee breaks CD mounting/burning
  • From: Borislav Petkov
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: Commit 9f10d9ee breaks CD mounting/burning
  • From: Bartlomiej Zolnierkiewicz
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Frans Pop
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Frans Pop
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• Frequent ATA errors
  • From: LCID Fire
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Gerold Jury
• [PATCH 4/4] disk-protect: Add a generic block layer queue freezing facility
  • From: Elias Oltmanns
• [PATCH 3/4] disk-protect: Add a REQ_TYPE_LINUX_BLOCK request handler to libata
  • From: Elias Oltmanns
• [PATCH 2/4] disk-protect: SCSI support for REQ_TYPE_LINUX_BLOCK requests
  • From: Elias Oltmanns
• [PATCH 1/4] disk-protect: Add disk shock protection helpers to libata
  • From: Elias Oltmanns
• Re: [RFC] Disk shock protection (revisited)
  • From: Elias Oltmanns
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: FUJITA Tomonori
• Re: SATA HDD password problem
  • From: Mark Lord
• Re: Problem with ahci and a external sata disk
  • From: Jose Alberto Reguero
• Re: Problem with ahci and a external sata disk
  • From: Jose Alberto Reguero
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Andi Kleen
• Re: SATA HDD password problem
  • From: Rus V. Brushkoff
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Tejun Heo
• Re: Commit 9f10d9ee breaks CD mounting/burning
  • From: Borislav Petkov
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Tejun Heo
• Re: SATA HDD password problem
  • From: Tejun Heo
• [PATCH 2/2] libata: kill SCSI devices before detaching ata_host
  • From: Tejun Heo
• [PATCH 1/2] scsi: export scsi_forget_host()
  • From: Tejun Heo
• Re: ata_ram driver
  • From: James Bottomley
• Re: ata_ram driver
  • From: Jeff Garzik
• Re: ata_ram driver
  • From: Tejun Heo
• Re: ata_ram driver
  • From: James Bottomley
• Re: ata_ram driver
  • From: Tejun Heo
• Re: ata_ram driver
  • From: James Bottomley
• Re: Commit 9f10d9ee breaks CD mounting/burning
  • From: walt
• Re: ata_ram driver
  • From: Tejun Heo
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Tejun Heo
• Re: ata_ram driver
  • From: James Bottomley
• Re: ata_ram driver
  • From: Tejun Heo
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Tejun Heo
• [Bug 10185] New: Commit 9f10d9ee breaks CD mounting/burning
  • From: bugme-daemon
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Krzysztof Halasa
• Re: Commit 9f10d9ee breaks CD mounting/burning
  • From: Bartlomiej Zolnierkiewicz
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Guennadi Liakhovetski
• Re: PROBLEM: SATA hotplugging not working with nForce MCP61
  • From: Tuomas Jormola
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Jeff Garzik
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Mark Lord
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Jeff Garzik
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Jeff Garzik
• RE: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Gaston, Jason D
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Jeff Garzik
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Jeff Garzik
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Mark Lord
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Jeff Garzik
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Mark Lord
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Mark Lord
• Re: Correct use of ap->lock versus ap->host->lock ?
  • From: Jeff Garzik
• Correct use of ap->lock versus ap->host->lock ?
  • From: Mark Lord
• Re: ata_ram driver
  • From: James Bottomley
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Mark Lord
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Mark Lord
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Jens Axboe
• [PATCH] ahci: add the Device IDs of nvidia MCP7B AHCI controller to ahci.c
  • From: peerchen
• Re: SATA HDD password problem
  • From: Rus V. Brushkoff
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Guennadi Liakhovetski
• [PATCH] Add support for the RB500 PATA CompactFlash
  • From: Florian Fainelli
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Ville Syrjälä
• Re: [PATCH #upstream-fixes 1/2] libata: allow LLDs w/o any reset method
  • From: Ingo Molnar
• Re: SATA HDD password problem
  • From: Tejun Heo
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Tejun Heo
• Re: [PATCH] use ATA_TAG_INTERNAL in ata_tag_internal()
  • From: Tejun Heo
• Re: Problem with pata_amd/sata_nv on ASRock Penryn1600SLI-110dB board
  • From: Tejun Heo
• Re: ata_ram driver
  • From: Tejun Heo
• Re: Problem with ahci and a external sata disk
  • From: Tejun Heo
• Re: sata_sil24 stability and performance
  • From: Tejun Heo
• Re: sata_sil24 stability and performance
  • From: Denys Dmytriyenko
• Amateur redhead and brunette teens parallelinerved
  • From: Molly Wood
• [PATCH] pata_ixp4xx_cf: support single chip-select operation
  • From: Hamish Moffatt
• Re: Spurious completions during NCQ
  • From: Tejun Heo
• Re: Spurious completions during NCQ
  • From: Tejun Heo
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: FUJITA Tomonori
• Re: sata_sil24 stability and performance
  • From: Tejun Heo
• Re: sata_sil24 stability and performance
  • From: Denys Dmytriyenko
• [PATCH #upstream-fixes 2/2] libata-sff: handle controllers w/o ctl register
  • From: Tejun Heo
• [PATCH #upstream-fixes 1/2] libata: allow LLDs w/o any reset method
  • From: Tejun Heo
• [PATCH 02/16] ata: replace remaining __FUNCTION__ occurrences
  • From: Harvey Harrison
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Krzysztof Halasa
• Commit 9f10d9ee breaks CD mounting/burning
  • From: walt
• [PATCH 1/3] ide: remove ->extra field from struct ide_port_info
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] ide: remove ide_dma_iobase()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/3] ide: remove ->cds field from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Zan Lynx
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Krzysztof Halasa
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Krzysztof Halasa
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: James Bottomley
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Tejun Heo
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Alan Cox
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Alan Cox
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Boaz Harrosh
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Tejun Heo
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Jens Axboe
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Tejun Heo
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Bartlomiej Zolnierkiewicz
• Re: Sata-MV, Intergated Sata Device Support
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Boaz Harrosh
• Re: SATA HDD password problem
  • From: Rus V. Brushkoff
• Re: [PATCH RFC] ahci: fix SB600 h/w errata issue
  • From: Jeff Garzik
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Jens Axboe
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Jens Axboe
• Re: SATA HDD password problem
  • From: Jeff Garzik
• Re: [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Mike Galbraith
• Re: -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Anders Eriksson
• Re: -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Anders Eriksson
• SATA HDD password problem
  • From: Rus V. Brushkoff
• [PATCH] blk: missing add of padded bytes to io completion byte count
  • From: Boaz Harrosh
• Re: sata_sil24 stability and performance
  • From: Tejun Heo
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• RE: [PATCH RFC] ahci: fix SB600 h/w errata issue
  • From: Su, Henry
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Andrew Morton
• Re: [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• [patch 1/3] libata: isolate and rework cable logic
  • From: akpm
• [patch 3/3] pata: "I do not think it means, what you think it means."
  • From: akpm
• [patch 2/3] pata_amd: fix sparse warning
  • From: akpm
• Re: -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Bartlomiej Zolnierkiewicz
• hdparm -W 0 2.6.24.3 causing XFS shutdown on IO Error
  • From: Jeremy Jackson
• Re: -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 09/14] ide: replace remaining __FUNCTION__ occurrences
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/2] ide: move ide.txt to Documentation/ide/
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_register_hw(): buggy code
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2 v2] ide: update references to Documentation/ide/ide.txt
  • From: Bartlomiej Zolnierkiewicz
• Re: Sata-MV, Intergated Sata Device Support
  • From: Mark Lord
• Re: [PATCH] block: fix residual byte count handling
  • From: Kiyoshi Ueda
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: walt
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: Sata-MV, Intergated Sata Device Support
  • From: Byron Bradley
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: Boaz Harrosh
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: James Bottomley
• Re: Sata-MV, Intergated Sata Device Support
  • From: Mark Lord
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: walt
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: James Bottomley
• Re: -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Anders Eriksson
• RE: locking problem in sata_sil24?
  • From: Rune Torgersen
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Anders Eriksson
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: sata_sil24 stability and performance
  • From: Denys Dmytriyenko
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Tejun Heo
• Re: sata_sil24 stability and performance
  • From: Tejun Heo
• [PATCH 09/14] ide: replace remaining __FUNCTION__ occurrences
  • From: Harvey Harrison
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: ide_register_hw(): buggy code
  • From: Peter Teoh
• Re: sata_sil24 stability and performance
  • From: Denys Dmytriyenko
• Re: -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_sil24 stability and performance
  • From: Tejun Heo
• Re: -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2 v2] ide: update references to Documentation/ide/ide.txt
  • From: Randy Dunlap
• RE: locking problem in sata_sil24?
  • From: Johannes Berg
• RE: locking problem in sata_sil24?
  • From: Rune Torgersen
• RE: locking problem in sata_sil24?
  • From: Benjamin Herrenschmidt
• [PATCH 2/2] ide: update references to Documentation/ide/ide.txt
  • From: Randy Dunlap
• [PATCH 1/2] ide: move ide.txt to Documentation/ide/
  • From: Randy Dunlap
• RE: locking problem in sata_sil24?
  • From: Rune Torgersen
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: locking problem in sata_sil24?
  • From: Benjamin Herrenschmidt
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• locking problem in sata_sil24?
  • From: Rune Torgersen
• Re: [PATCH 02/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_write_request
  • From: Bartlomiej Zolnierkiewicz
• Re: ide_register_hw(): buggy code
  • From: Bartlomiej Zolnierkiewicz
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: Stefan Richter
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• [Bug 10159] 2.6.25-rc2 IDE + smartd = hang
  • From: bugme-daemon
• [Bug 10159] 2.6.25-rc2 IDE + smartd = hang
  • From: bugme-daemon
• [Bug 10086] 2.6.25-rc2 + smartd = hang
  • From: bugme-daemon
• Re: [PATCH] block: separate out padding from alignment
  • From: James Bottomley
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: Boris Petkov
• Re: Setting up md-raid5: observations, errors, questions
  • From: Bill Davidsen
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: Stefan Richter
• [PATCH] libata,libsas: expose ata_sas_change_queue_depth() and use it
  • From: James Bottomley
• [PATCH] libata: update port initialisation for SAS call in
  • From: James Bottomley
• [Bug 10159] 2.6.25-rc2 IDE + smartd = hang
  • From: bugme-daemon
• Re: ide_register_hw(): buggy code
  • From: Peter Teoh
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: James Bottomley
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• [Bug 10159] New: 2.6.25-rc2 IDE + smartd = hang
  • From: bugme-daemon
• [Bug 9904] ASUS DVD-E616A - drive side 80-wire cable detection failed
  • From: bugme-daemon
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: Tejun Heo
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: Mikael Pettersson
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: Mikael Pettersson
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: Stefan Richter
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: FUJITA Tomonori
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• Re: [PATCH 02/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_write_request
  • From: Borislav Petkov
• [PATCH] block: separate out padding from alignment
  • From: Tejun Heo
• [PATCH 1/2] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Galbraith
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Tokarev
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: Stefan Richter
• [Bug 10086] 2.6.25-rc2 + smartd = hang
  • From: bugme-daemon
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• Re: [BUG] 2.6.25-rc2-git3 broke cdrecord
  • From: James Bottomley
• Re: [PATCH 04/24] ide-tape: remove pipeline-specific code from idetape_chrdev_write
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 02/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_write_request
  • From: Bartlomiej Zolnierkiewicz
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Tokarev
• Re: [PATCH 04/24] ide-tape: remove pipeline-specific code from idetape_chrdev_write
  • From: Borislav Petkov
• Re: [PATCH 03/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_read_request
  • From: Borislav Petkov
• Re: [PATCH 02/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_write_request
  • From: Borislav Petkov
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• Re: [PATCH 06/24] ide-tape: remove unused stage-parameter from idetape_copy_stage_to_user
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 05/24] ide-tape: cleanup pipeline-specific code from idetape_init_read
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 04/24] ide-tape: remove pipeline-specific code from idetape_chrdev_write
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_read_request
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 02/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_write_request
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/24] ide-tape: remove idetape_pipeline_active()
  • From: Bartlomiej Zolnierkiewicz
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• Re: [PATCH] block: fix residual byte count handling
  • From: Mike Christie
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Tokarev
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• ide_register_hw(): buggy code
  • From: Adrian Bunk
• Re: Setting up md-raid5: observations, errors, questions
  • From: Michael Tokarev
• Re: [PATCH] block: fix residual byte count handling
  • From: FUJITA Tomonori
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• [Bug 10142] DMA crash with via82cxxx module
  • From: bugme-daemon
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• [Bug 10142] New: DMA crash with via82cxxx module
  • From: bugme-daemon
• Re: Setting up md-raid5: observations, errors, questions
  • From: Justin Piszcz
• Re: Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• Re: Setting up md-raid5: observations, errors, questions
  • From: Justin Piszcz
• Setting up md-raid5: observations, errors, questions
  • From: Christian Pernegger
• Re: [RFC] Disk shock protection (revisited)
  • From: Pavel Machek
• Re: sata_sil24 stability and performance
  • From: Gabor FUNK
• Re: sata_sil24 stability and performance
  • From: Denys Dmytriyenko
• [PATCH 7/9] ide: manage resources for PCI devices in ide_pci_enable()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/9] ide: remove ide_hwif_request_regions()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/9] ide: cleanup setting hwif->mmio flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/9] cmd640: manage I/O resources in driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/9] ide: manage I/O resources in ide_legacy_init_one()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/9] ide: add ide_legacy_init_one() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/9] ide_arm: manage I/O resources in driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/9] ide-generic: manage I/O resources in driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/9] ide-4drives: manage I/O resources in driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: register ports with non-present devices (for warm-plug)
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: use ide_legacy_device_add() for qd65xx (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/24] ide-tape: remove pipelined mode operation
  • From: Jens Axboe
• Re: [RFC PATCH] libata: PIO via bounce buffer
  • From: Alan Cox
• [RFC: 2.6 patch] libata-scsi.c: possible cleanups
  • From: Adrian Bunk
• [RFC: 2.6 patch] libata-core.c: possible cleanups
  • From: Adrian Bunk
• [RFC: 2.6 patch] make ata_eh_qc_retry() static
  • From: Adrian Bunk
• Re: [PATCH 00/24] ide-tape: remove pipelined mode operation
  • From: Borislav Petkov
• Re: [PATCH 00/24] ide-tape: remove pipelined mode operation
  • From: Borislav Petkov
• Re: [PATCH] block: fix residual byte count handling
  • From: James Bottomley
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Gerold Jury
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Sergey Vlasov
• Re: [PATCH 00/24] ide-tape: remove pipelined mode operation
  • From: Adrian Bunk
• Re: [PATCH 00/24] ide-tape: remove pipelined mode operation
  • From: Jens Axboe
• [PATCH 00/24] ide-tape: remove pipelined mode operation
  • From: Borislav Petkov
• [PATCH 12/24] ide-tape: remove idetape_empty_write_pipeline
  • From: Borislav Petkov
• [PATCH 03/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_read_request
  • From: Borislav Petkov
• [PATCH 01/24] ide-tape: remove idetape_pipeline_active()
  • From: Borislav Petkov
• [PATCH 13/24] ide-tape: remove pipeline-specific code from idetape_chrdev_release
  • From: Borislav Petkov
• [PATCH 07/24] ide-tape: remove pipeline-specific code bits from idetape_chrdev_read
  • From: Borislav Petkov
• [PATCH 19/24] ide-tape: remove pipelined mode parameters
  • From: Borislav Petkov
• [PATCH 06/24] ide-tape: remove unused stage-parameter from idetape_copy_stage_to_user
  • From: Borislav Petkov
• [PATCH 21/24] ide-tape: remove pipeline-specific members from struct ide_tape_obj
  • From: Borislav Petkov
• [PATCH 05/24] ide-tape: cleanup pipeline-specific code from idetape_init_read
  • From: Borislav Petkov
• [PATCH 18/24] ide-tape: remove pipeline-specific code from idetape_setup
  • From: Borislav Petkov
• [PATCH 17/24] ide-tape: remove pipeline-specific code from idetape_chrdev_open
  • From: Borislav Petkov
• [PATCH 15/24] ide-tape: remove pipeline-specific code from idetape_end_request
  • From: Borislav Petkov
• [PATCH 09/24] ide-tape: remove pipeline-specific code from idetape_mtioctop
  • From: Borislav Petkov
• [PATCH 16/24] ide-tape: remove idetape_calculate_speeds
  • From: Borislav Petkov
• [PATCH 11/24] ide-tape: remove pipeline-specific code from idetape_blkdev_ioctl
  • From: Borislav Petkov
• [PATCH 04/24] ide-tape: remove pipeline-specific code from idetape_chrdev_write
  • From: Borislav Petkov
• [PATCH 24/24] ide-tape: remove comments markup from Documentation/ide/ide-tape.txt
  • From: Borislav Petkov
• [PATCH 22/24] ide-tape: remove misc references to pipelined operation in the comments
  • From: Borislav Petkov
• [RFCPATCH 10/24] ide-tape: remove pipeline-specific code from idetape_chrdev_ioctl
  • From: Borislav Petkov
• [PATCH 23/24] ide-tape: remove pipelined mode description from Documentation/ide/ide-tape.txt
  • From: Borislav Petkov
• [PATCH 08/24] ide-tape: remove pipeline-specific code from idetape_space_over_filemarks
  • From: Borislav Petkov
• [PATCH 02/24] ide-tape: remove pipeline-specific code from idetape_add_chrdev_write_request
  • From: Borislav Petkov
• [PATCH 14/24] ide-tape: remove __idetape_discard_read_pipeline
  • From: Borislav Petkov
• [PATCH 20/24] ide-tape: remove pipelined mode tape control flags
  • From: Borislav Petkov
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• [git patches] libata fixes, and release notes
  • From: Jeff Garzik
• Re: [RFC PATCH] libata: PIO via bounce buffer
  • From: Jeff Garzik
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Gerold Jury
• Re: [PATCH 3/3] ide: remove IDE_*_REG macros
  • From: Sergei Shtylyov
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• Re: devres and requesting resources
  • From: Jeff Garzik
• Re: devres and requesting resources
  • From: Alan Cox
• Re: devres and requesting resources
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] block: fix residual byte count handling
  • From: James Bottomley
• Re: devres and requesting resources
  • From: Tejun Heo
• Re: devres and requesting resources
  • From: Alan Cox
• Re: devres and requesting resources
  • From: Alan Cox
• [RFC PATCH] libata: PIO via bounce buffer
  • From: Alan Cox
• Re: devres and requesting resources
  • From: Tejun Heo
• Re: devres and requesting resources
  • From: Jeff Garzik
• Re: devres and requesting resources
  • From: Alan Cox
• Re: PATA Sil680 Disabling IRQ
  • From: Alan Cox
• RE: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Gaston, Jason D
• [Bug 3072] ATAPI Zip drive doesn't work properly
  • From: bugme-daemon
• Re: PATA Sil680 Disabling IRQ
  • From: Fajun Chen
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Felix Miata
• devres and requesting resources
  • From: Jeff Garzik
• Re: [PATCH 2.6.23.11] sata_svw: Add support for HT1100 SATA controller
  • From: Jeff Garzik
• [PATCH 2.6.23.11] sata_svw: Add support for HT1100 SATA controller
  • From: Anantha Subramanyam
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Holger Macht
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Guennadi Liakhovetski
• Re: PATA Sil680 Disabling IRQ
  • From: Alan Cox
• Re: Unknown SATA PIIX PCI device ID 0x29b6
  • From: Alan Cox
• Unknown SATA PIIX PCI device ID 0x29b6
  • From: Guennadi Liakhovetski
• Re: PATA Sil680 Disabling IRQ
  • From: Jeff Garzik
• Re: PATA Sil680 Disabling IRQ
  • From: Fajun Chen
• [PATCH RFC] ahci: fix SB600 h/w errata issue
  • From: Jeff Garzik
• Re: PATA Sil680 Disabling IRQ
  • From: Alan Cox
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Holger Macht
• Re: [RFC] Disk shock protection (revisited)
  • From: Greg Freemyer
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Holger Macht
• Re: [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [PATCH] block: fix residual byte count handling
  • From: Jens Axboe
• -rc3 regression (was Re: 2.6.25-rc2 + smartd = hang )
  • From: Anders Eriksson
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Tejun Heo
• [PATCH] use ATA_TAG_INTERNAL in ata_tag_internal()
  • From: Yoichi Yuasa
• Re: [RFC] Disk shock protection (revisited)
  • From: Alan Cox
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Holger Macht
• Re: [RFC] Disk shock protection (revisited)
  • From: Elias Oltmanns
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Tejun Heo
• [PATCH] block: fix residual byte count handling
  • From: Tejun Heo
• Re: [RFC] Disk shock protection (revisited)
  • From: Elias Oltmanns
• Re: regression: CD burning (k3b) went broke
  • From: Mike Galbraith
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: regression: CD burning (k3b) went broke
  • From: Tejun Heo
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: FUJITA Tomonori
• Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
  • From: Borislav Petkov
• Re: [PATCH 0/5] ide-cd: trivial fixes
  • From: Borislav Petkov
• Re: PATA Sil680 Disabling IRQ
  • From: Fajun Chen
• Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] ide-cs: manage I/O resources in driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] ide-pnp: manage I/O resources in driver
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/3] ide: remove ide_hwif_release_regions()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/5] ide-cd: trivial fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/5] ide-cd: trivial fixes
  • From: Borislav Petkov
• Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
  • From: Borislav Petkov
• [PATCH 3/4] ide: use ide_legacy_device_add() for qd65xx
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] ide: add ide_legacy_device_add() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/4] qd65xx: cleanup qd_probe()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] ide: remove ->noprobe field from ide_hwif_t
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] ide: use ide_find_port() in legacy VLB host drivers (take 2)
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 5/5] ide-cd: fix remaining checkpatch.pl issues
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/5] ide-cd: fixup comments
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/5] ide-cd: trivial fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/5] ide-cd: include proper headers
  • From: Borislav Petkov
• [PATCH 2/5] ide-cd: put all proc-related code at one place
  • From: Borislav Petkov
• [PATCH 0/5] ide-cd: trivial fixes
  • From: Borislav Petkov
• [PATCH 3/5] ide-cd: fixup comments
  • From: Borislav Petkov
• [PATCH 4/5] ide-cd: shorten lines longer than 80 columns
  • From: Borislav Petkov
• [PATCH 5/5] ide-cd: fix remaining checkpatch.pl issues
  • From: Borislav Petkov
• RE: ULI 5288(SATA driver)
  • From: Saumendra Dash
• Re: 2.6.25-rc2 + smartd = hang
  • From: Anders Eriksson
• Re: regression: CD burning (k3b) went broke
  • From: Mike Galbraith
• Re: regression: CD burning (k3b) went broke
  • From: Mike Galbraith
• Re: regression: CD burning (k3b) went broke
  • From: Mike Galbraith
• Re: regression: CD burning (k3b) went broke
  • From: Mike Galbraith
• Re: PATA Sil680 Disabling IRQ
  • From: Jeff Garzik
• PATA Sil680 Disabling IRQ
  • From: Fajun Chen
• Re: regression: CD burning (k3b) went broke
  • From: Jeff Garzik
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: [PATCH] ide-cd: fix some codestyle and most of the checkpatch.pl issues
  • From: Paolo Ciarrocchi
• Re: regression: CD burning (k3b) went broke
  • From: Andrew Morton
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Alan Cox
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: [PATCH 0/3] Various IDE coding style fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cd: fix some codestyle and most of the checkpatch.pl issues
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide-cd: put proc-related functions together under single ifdef
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 4/6] IDE: Coding Style fixes to drivers/ide/pci/it8213.c
  • From: Bartlomiej Zolnierkiewicz
• [git patches] IDE fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 08/10] IDE: Coding Style fixes to drivers/ide/pci/generic.c
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/6] IDE: new series of Coding Style Fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.25-rc2 + smartd = hang
  • From: Bartlomiej Zolnierkiewicz
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: James Bottomley
• Re: [ugly patch] Save .15W-.5W by AHCI powersaving
  • From: Pavel Machek
• Re: 2.6.25-rc2 + smartd = hang
  • From: Anders Eriksson
• Re: [RFC] Disk shock protection (revisited)
  • From: Willy Tarreau
• Re: [PATCH] pata: "I do not think it means, what you think it means."
  • From: Alan Cox
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Gerold Jury
• Re: [PATCH] pata: "I do not think it means, what you think it means."
  • From: Andrew Morton
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Borislav Petkov
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• Re: [ugly patch] Save .15W-.5W by AHCI powersaving
  • From: Matthew Garrett
• [PATCH] pata: "I do not think it means, what you think it means."
  • From: Alan Cox
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: James Bottomley
• Re: Sata-MV, Intergated Sata Device Support
  • From: Mark Lord
• Re: [ugly patch] Save .15W-.5W by AHCI powersaving
  • From: Mark Lord
• Re: ops->qc_defer not invoked on ata_exec_internal_sg() paths ?
  • From: Mark Lord
• Re: WD1000FYPS problem
  • From: Daniel Schroeder
• WD1000FYPS problem
  • From: Daniel Schroeder
• Re: [RFC] Disk shock protection (revisited)
  • From: Alan Cox
• Re: ops->qc_defer not invoked on ata_exec_internal_sg() paths ?
  • From: Alan Cox
• Re: [PATCH] libata: Register for dock events when the drive is inside a dock station
  • From: Holger Macht
• Re: Sata-MV, Intergated Sata Device Support
  • From: saeed
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Brad Rosser
• Re: 2.6.25-rc2 + smartd = hang
  • From: Anders Eriksson
• [PATCH] ide-cd: fix some codestyle and most of the checkpatch.pl issues
  • From: Borislav Petkov
• [PATCH] ide-cd: put proc-related functions together under single ifdef
  • From: Borislav Petkov
• ide-cd: trivial fixes
  • From: Borislav Petkov
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Tejun Heo
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• Re: ops->qc_defer not invoked on ata_exec_internal_sg() paths ?
  • From: Tejun Heo
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• Re: [RFC] Disk shock protection (revisited)
  • From: Henrique de Moraes Holschuh
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Benjamin Herrenschmidt
• Re: [RFC] Disk shock protection (revisited)
  • From: Elias Oltmanns
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Jeff Garzik
• ops->qc_defer not invoked on ata_exec_internal_sg() paths ?
  • From: Mark Lord
• Re: Sata-MV, Intergated Sata Device Support
  • From: Jeff Garzik
• Re: libata .sg_tablesize: why always dividing by 2 ?
  • From: Jeff Garzik
• [Bug 10086] 2.6.25-rc2 + smartd = hang
  • From: bugme-daemon
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: Sata-MV, Intergated Sata Device Support
  • From: Mark Lord
• Re: [RFC] Disk shock protection (revisited)
  • From: Jeff Garzik
• libata .sg_tablesize: why always dividing by 2 ?
  • From: Mark Lord
• [RFC] Disk shock protection (revisited)
  • From: Elias Oltmanns
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Tejun Heo
• Re: Sata-MV, Intergated Sata Device Support
  • From: Jeff Garzik
• Re: extra bytes written to SATA DVD drive on kernel 2.6.23 till 2.6.24.2
  • From: Andrew Morton
• Re: ULI 5288(SATA driver)
  • From: Jeff Garzik
• Re: achi.c bug ?
  • From: Jeff Garzik
• Re: [ugly patch] Save .15W-.5W by AHCI powersaving
  • From: Jeff Garzik
• [git patches] libata updates
  • From: Jeff Garzik
• Re: new regression in 2.6.25-rc3: can't resume from suspend to ram, ata1 errors
  • From: Pavel Machek
• Re: [ugly patch] Save .15W-.5W by AHCI powersaving
  • From: Pavel Machek
• Re: [ugly patch] Save .15W-.5W by AHCI powersaving
  • From: Mark Lord
• Re: Old errata docs
  • From: Mark Lord
• Re: new regression in 2.6.25-rc3: can't resume from suspend to ram, ata1 errors
  • From: Bartlomiej Zolnierkiewicz
• Re: new regression in 2.6.25-rc3: can't resume from suspend to ram, ata1 errors
  • From: Jeff Garzik
• Re: new regression in 2.6.25-rc3: can't resume from suspend to ram, ata1 errors
  • From: Rafael J. Wysocki
• new regression in 2.6.25-rc3: can't resume from suspend to ram, ata1 errors
  • From: Michael S. Tsirkin
• Re: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  • From: Chuck Ebbert
• Re: [PATCH 4/6] IDE: Coding Style fixes to drivers/ide/pci/it8213.c
  • From: Sergei Shtylyov
• Old errata docs
  • From: Alan Cox
• Re: Need help with libata error handling in libsas
  • From: Jeff Garzik
• Re: Need help with libata error handling in libsas
  • From: James Bottomley
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: Need help with libata error handling in libsas
  • From: Brian King
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Borislav Petkov
• [ugly patch] Save .15W-.5W by AHCI powersaving
  • From: Pavel Machek
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 3/3] IDE: Coding Style fixes to drivers/ide/pci/cy82c693.c
  • From: Paolo Ciarrocchi
• [Bug 10086] New: 2.6.25-rc2 + smartd = hang
  • From: bugme-daemon
• Re: [PATCH 3/3] IDE: Coding Style fixes to drivers/ide/pci/cy82c693.c
  • From: Ingo Molnar
• Re: 2.6.26-git0: IDE oops during boot
  • From: Yinghai Lu
• Re: [Bugme-new] [Bug 10091] New: GGW-H10N SATA DVD drive write errors using AHCI driver with nForce 630a chipset
  • From: Andrew Morton
• Re: 2.6.26-git0: IDE oops during boot
  • From: Yinghai Lu
• Re: [PATCH 2/3] IDE: Replace __FUNCTION__ with __func__
  • From: Paolo Ciarrocchi
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Brad Rosser
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Borislav Petkov
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Tejun Heo
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Jeff Garzik
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Jeff Garzik
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Mark Lord
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Brad Rosser
• [2.6 patch] make atapi_dmadir static
  • From: Adrian Bunk
• Re: [PATCH 2/3] IDE: Replace __FUNCTION__ with __func__
  • From: Joe Perches
• Problem with pata_amd/sata_nv on ASRock Penryn1600SLI-110dB board
  • From: Andreas Bierfert
• Re: [PATCH 1/3] IDE: Coding Style fixes to drivers/ide/ide-cd.c
  • From: Adrian Bunk
• Need help with libata error handling in libsas
  • From: James Bottomley
• [PATCH 3/3] IDE: Coding Style fixes to drivers/ide/pci/cy82c693.c
  • From: Paolo Ciarrocchi
• [PATCH 2/3] IDE: Replace __FUNCTION__ with __func__
  • From: Paolo Ciarrocchi
• [PATCH 1/3] IDE: Coding Style fixes to drivers/ide/ide-cd.c
  • From: Paolo Ciarrocchi
• [PATCH 0/3] Various IDE coding style fixes
  • From: Paolo Ciarrocchi
• [PATCH 4/6] IDE: Coding Style fixes to drivers/ide/pci/it8213.c
  • From: Paolo Ciarrocchi
• Re: [PATCH 0/6] IDE: new series of Coding Style Fixes
  • From: Paolo Ciarrocchi
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Bartlomiej Zolnierkiewicz
• Re: [Fixed PATCH] hpt366: fix section mismatch warnings
  • From: Sam Ravnborg
• Re: IDE cdrom problem with PLEXTOR DVDR PX-608AL
  • From: Borislav Petkov
• Re: [git patches] libata fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patches] libata fixes
  • From: Alan Cox
• Re: [git patches] libata fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 0/6] IDE: new series of Coding Style Fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/10] IDE: Coding Style Fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: [Fixed PATCH] hpt366: fix section mismatch warnings
  • From: Bartlomiej Zolnierkiewicz
• Re: JMicron - hard resetting link
  • From: Gabor FUNK
• Re: 2.6.25-rc2 + smartd = hang
  • From: Anders Eriksson
• Re: 2.6.25-rc2 + smartd = hang
  • From: Pavel Machek
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Jeff Garzik
• Re: new ata_port_operations for .pmp_{read,write} ?
  • From: Tejun Heo
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [PATCH] libata-core: fix kernel-doc warning
  • From: Jeff Garzik
• Re: [PATCH] sata_fsl: fix build with ATA_VERBOSE_DEBUG
  • From: Jeff Garzik
• Re: [PATCH] AMD SB700/SB800 SATA support 64bit DMA
  • From: Jeff Garzik
• Re: [PATCH] libata-pmp: clear hob for pmp register accesses
  • From: Jeff Garzik
• Re: [PATCH] libata: automatically use DMADIR if drive/bridge requires it
  • From: Jeff Garzik
• Re: power_state: get rid of write-only variable in SATA
  • From: Jeff Garzik
• Re: 2.6.25-rc2 + smartd = hang
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.25-rc2 + smartd = hang
  • From: Anders Eriksson
• Re: 2.6.25-rc2 + smartd = hang
  • From: Anders Eriksson
• [Fixed PATCH] hpt366: fix section mismatch warnings
  • From: Sam Ravnborg
• [PATCH 4/4] ide: add struct ide_port_ops
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/4] ide: sanitize handling of IDE_HFLAG_NO_SET_MODE host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] sis5513: fail early for unsupported chipsets
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] it821x: fix kzalloc() failure handling
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/2] qd65xx: use IDE_HFLAG_SINGLE host flag
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] qd65xx: always use ->selectproc method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] qd65xx: fix setup of QD6580 Control register
  • From: Bartlomiej Zolnierkiewicz
• Re: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  • From: Vegard Nossum
• Re: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  • From: Vegard Nossum
• Re: ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  • From: Alan Cox
• ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
  • From: Vegard Nossum
• [PATCH 6/6] IDE: Coding Style fixes to drivers/ide/pci/cmd640.c
  • From: Paolo Ciarrocchi
• [PATCH 5/6] IDE: Coding Style fixes to drivers/ide/ide-floppy.c
  • From: Paolo Ciarrocchi
• [PATCH 3/6] IDE: Coding Style fixes to drivers/ide/legacy/ali14xx.c
  • From: Paolo Ciarrocchi
• [PATCH 2/6] IDE: Coding Style fixes to drivers/ide/legacy/hd.c
  • From: Paolo Ciarrocchi
• [PATCH 1/6] IDE: Coding Style fixes to drivers/ide/pci/opti621.c
  • From: Paolo Ciarrocchi
• [PATCH 0/6] IDE: new series of Coding Style Fixes
  • From: Paolo Ciarrocchi
• Re: [PATCH 08/10] IDE: Coding Style fixes to drivers/ide/pci/generic.c
  • From: Cyrill Gorcunov
• Re: [PATCH 08/10] IDE: Coding Style fixes to drivers/ide/pci/generic.c
  • From: Paolo Ciarrocchi
• Re: [PATCH 08/10] IDE: Coding Style fixes to drivers/ide/pci/generic.c
  • From: Cyrill Gorcunov
• Re: [PATCH 08/10] IDE: Coding Style fixes to drivers/ide/pci/generic.c
  • From: Adrian Bunk
• Re: [PATCH 00/10] IDE: Coding Style Fixes
  • From: Paolo Ciarrocchi
• [PATCH 10/10] IDE: Coding Style fixes to drivers/ide/pci/tc86c001.c
  • From: Paolo Ciarrocchi
• [PATCH 09/10] IDE: Coding Style fixes to drivers/ide/pci/jmicron.c
  • From: Paolo Ciarrocchi
• [PATCH 08/10] IDE: Coding Style fixes to drivers/ide/pci/generic.c
  • From: Paolo Ciarrocchi
• [PATCH 07/10] IDE: Coding Style fixes to drivers/ide/pci/slc90e66.c
  • From: Paolo Ciarrocchi
• [PATCH 06/10] IDE: Coding Style fixes to drivers/ide/legacy/ide-4drives.c
  • From: Paolo Ciarrocchi
• [PATCH 05/10] IDE: Coding Style fixes to drivers/ide/ide-proc.c
  • From: Paolo Ciarrocchi
• [PATCH 04/10] IDE: Coding Style fixes to drivers/ide/setup-pci.c
  • From: Paolo Ciarrocchi
• [PATCH 03/10] IDE: Coding Style fixes to drivers/ide/ide-pnp.c
  • From: Paolo Ciarrocchi