On Tue, 2008-03-04 at 10:35 +0100, Jens Axboe wrote:
> Looks excellent to me, has a variant of this been tested as OK by the
> users reporting the regression?
K3b burning seems to be a nogo here. This is git pulled this morning
though, so it's a somewhat different tree than previously tested fwtw.
[ 136.440021] ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 136.440043] ata1.01: cmd a0/00:00:00:00:00/00:00:00:00:00/b0 tag 0
[ 136.440045] cdb 51 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00
[ 136.440047] res 58/00:02:00:02:00/00:00:00:00:00/b0 Emask 0x2 (HSM violation)
[ 136.440053] ata1.01: status: { DRDY DRQ }
[ 136.440086] ata1: soft resetting link
[ 165.327627] ata1.01: qc timeout (cmd 0xa1)
[ 165.327627] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 165.327627] ata1.01: revalidation failed (errno=-5)
[ 165.327627] ata1: failed to recover some devices, retrying in 5 secs
[ 177.272373] ata1: port is slow to respond, please be patient (Status 0x80)
[ 180.388879] ata1: device not ready (errno=-16), forcing hardreset
[ 180.388879] ata1: soft resetting link
[ 210.832471] ata1.01: qc timeout (cmd 0xa1)
[ 210.832471] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 210.832471] ata1.01: revalidation failed (errno=-5)
[ 210.832471] ata1: failed to recover some devices, retrying in 5 secs
[ 223.392899] ata1: port is slow to respond, please be patient (Status 0x80)
[ 225.920376] ata1: device not ready (errno=-16), forcing hardreset
[ 225.920376] ata1: soft resetting link
[ 256.542565] ata1.01: qc timeout (cmd 0xa1)
[ 256.542565] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 256.542565] ata1.01: revalidation failed (errno=-5)
[ 256.542565] ata1.01: disabled
[ 259.995199] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40)
[ 259.995214] ata1.00: revalidation failed (errno=-5)
[ 259.995219] ata1: failed to recover some devices, retrying in 5 secs
[ 265.047502] ata1: soft resetting link
[ 262.397570] ata1.00: limited to UDMA/33 due to 40-wire cable
[ 262.420039] ata1.00: configured for UDMA/33
[ 262.420039] sr 0:0:1:0: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK
[ 262.420039] sr 0:0:1:0: [sr0] Sense Key : Aborted Command [current] [descriptor]
[ 262.420039] Descriptor sense data with sense descriptors (in hex):
[ 262.420039] 72 0b 47 00 00 00 00 0e 09 0c 00 00 00 02 00 00
[ 262.420039] 00 02 00 00 b0 58
[ 262.420039] sr 0:0:1:0: [sr0] Add. Sense: Scsi parity error
[ 262.420039] ata1: EH complete
[ 262.420257] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 262.420320] sd 0:0:0:0: [sda] Write Protect is off
[ 262.420326] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 262.420390] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
