Linux IDE Archive

• Thread Index

• [PATCH 5/9] ide2libata: add missing credits
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/9] pata_sil680: move code to be re-used by ide2libata to pata_sil680.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/9] siimage: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/9] cs5536: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/9] siimage: cleanup I/O helpers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/9] pata_sil680: CodingStyle fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/9] few more ide2libata patches
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/68] ide2libata
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/68] ide2libata
  • From: Alan Cox
• Re: [PATCH 00/68] ide2libata
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/68] ide2libata
  • From: Jeff Garzik
• Re: [kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]
  • From: Robert Hancock
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Robert Hancock
• Re: [PATCH 25/68] it8213: always program control bits
  • From: Sergei Shtylyov
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Ulli.Brennenstuhl
• [PATCH 02/68] libata: CodingStyle fixes for ATA timings code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/68] piix: add new short cable IDs
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/68] ide: switch to generic ATA timings code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/68] pata_pcmcia: move IDs table to pata_pcmcia.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/68] ata: make ATA timings code independent of libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/68] ide-cs: use pata_pcmcia.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/68] ata_piix: move short cable handling to ata_piix.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/68] via82cxxx: use pata_via.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/68] alim15x3: use pata_ali.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/68] ide: add hwif->udma_mask field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/68] ide: split host->dev table
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 21/68] ide: add hwif->private_data field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/68] ide: add hwif->port_no field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 23/68] ide: add drive->class field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 27/68] slc90e66: always program control bits
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 26/68] piix: always program control bits
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 24/68] ide: change ->cable_detect method return type to 'int'
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 28/68] add ide2libata header file
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 29/68] ata_piix: move code to be re-used by ide2libata to ata_piix.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 35/68] pata_artop: move code to be re-used by ide2libata to pata_artop.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 31/68] pata_ali: move code to be re-used by ide2libata to pata_ali.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 33/68] pata_amd: move code to be re-used by ide2libata to pata_amd.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 34/68] amd74xx: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 36/68] aec62xx: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 38/68] atiixp: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 37/68] pata_atiixp: move code to be re-used by ide2libata to pata_atiixp.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 40/68] pata_cmd64x: move code to be re-used by ide2libata to pata_cmd64x.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 43/68] cs5520: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 45/68] cs5530: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 41/68] pata_cmd64x: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 39/68] pata_cmd64x: documentation fix
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 47/68] cs5535: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 49/68] cy82c693: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 50/68] pata_efar: move code to be re-used by ide2libata to pata_efar.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 48/68] pata_cypress: move code to be re-used by ide2libata to pata_cypress.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 44/68] pata_cs5530: move code to be re-used by ide2libata to pata_cs5530.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] Call flush_dcache_page around PIO data transfers in libata-aff.c
  • From: Catalin Marinas
• [PATCH 55/68] it821x: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 54/68] pata_it821x: move code to be re-used by ide2libata to pata_it821x.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 58/68] pata_sc1200: move code to be re-used by ide2libata to pata_sc1200.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 61/68] serverworks: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 63/68] sl82c105: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 60/68] pata_serverworks: move cable handling to pata_serverworks.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 66/68] pata_via: factor out code for finding ISA bridge
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 65/68] triflex: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 67/68] pata_via: move code to be re-used by ide2libata to pata_via.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 68/68] via82cxxx: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 64/68] pata_triflex: move code to be re-used by ide2libata to pata_triflex.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 62/68] pata_sl82c105: move code to be re-used by ide2libata to pata_sl82c105.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 59/68] sc1200: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 57/68] pdc202xx_old: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 56/68] pata_pdc202xx_old: move code to be re-used by ide2libata to pata_pdc202xx_old.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 53/68] it8213: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 52/68] pata_it8213: move code to be re-used by ide2libata to pata_it8213.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 51/68] slc90e66: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 46/68] pata_cs5535: move code to be re-used by ide2libata to pata_cs5535.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 42/68] pata_cs5520: move code to be re-used by ide2libata to pata_cs5520.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 32/68] alim15x3: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 30/68] piix: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 25/68] it8213: always program control bits
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 22/68] ide: add drive->devno field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/68] pata_via: move short cable handling to pata_via.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/68] sis5513: use pata_sis.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/68] pata_sis: move short cable handling to pata_sis.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/68] pata_ali: move short cable handling to pata_ali.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/68] piix: use ata_piix.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/68] ata_piix: factor out short cable detection code to ich_short_ata40()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/68] ata: enable XFER_PIO_SLOW mode in ata_timing table
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/68] libata: move ATA timings code to ata-timings.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/68] ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]
  • From: Borislav Petkov
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Mark Lord
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Jarod Wilson
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Nikola Ciprich
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Ric Wheeler
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Nikola Ciprich
• Re: [PATCH] ide: fixed section mismatch warning in cmd640.c
  • From: David Miller
• [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
  • From: Christoph Hellwig
• Re: [PATCH] libata: fix ata_id_logical_per_physical_sectors
  • From: Christoph Hellwig
• Re: [PATCH] libata: fix ata_id_logical_per_physical_sectors
  • From: Sergei Shtylyov
• [PATCH] libata: fix ata_id_logical_per_physical_sectors
  • From: Christoph Hellwig
• [PATCH #upstream-fixes] ahci: add Acer G725 to broken suspend list
  • From: Tejun Heo
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: David Rees
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Mark Lord
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Mark Lord
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Ric Wheeler
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Jarod Wilson
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Robert Hancock
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Mark Lord
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Alan Cox
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: David Rees
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Jeff Garzik
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: David Rees
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Willy Tarreau
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Alan Cox
• [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: sata_via.c next-20100125 unsuccess report
  • From: Alexey Lobanov
• Re: sata_via.c next-20100125 unsuccess report
  • From: Bart Hartgers
• sata_via.c next-20100125 unsuccess report
  • From: Alexey Lobanov
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Mike Cui
• [Bug 13345] panic when reading data from IDE CDROM with >= 2.6.29 kernels
  • From: bugzilla-daemon
• [Bug 13345] panic when reading data from IDE CDROM with >= 2.6.29 kernels
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: Intermittent SATA link down SStatus 0
  • From: Tejun Heo
• Re: [PATCH] hdparm: Fix error in sector offset reporting
  • From: Mark Lord
• Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
  • From: Robert Hancock
• Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
  • From: Ilia Mirkin
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
  • From: Robert Hancock
• [PATCH] hdparm: Fix error in sector offset reporting
  • From: Martin K. Petersen
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Alan Cox
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Alan Cox
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Robert Hancock
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Robert Hancock
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Jeff Garzik
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Robert Hancock
• PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: MSI broken in libata?
  • From: Robert Hancock
• Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Tejun Heo
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Robert Hancock
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Mike Cui
• Re: SATA_SIL on IXP425 workaround
  • From: Krzysztof Halasa
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: SATA_SIL on IXP425 workaround
  • From: Jeff Garzik
• Re: [PATCH 46/64] ide: add drive->pio_mode field
  • From: Sergei Shtylyov
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Alan Cox
• port multiplier problem
  • From: Chandra Nepali
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Jeff Garzik
• Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Jeff Garzik
• Re: Intermittent SATA link down SStatus 0
  • From: Jeff Garzik
• Intermittent SATA link down SStatus 0
  • From: Paul Check
• Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Alan Cox
• Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Alan Cox
• Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Bartlomiej Zolnierkiewicz
• Re: SATA_SIL on IXP425 workaround
  • From: Jeff Garzik
• Re: SATA_SIL on IXP425 workaround
  • From: Jeff Garzik
• Re: SATA_SIL on IXP425 workaround
  • From: Jeff Garzik
• WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
  • From: Ilia Mirkin
• Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Jeff Garzik
• [git patch] libata fix
  • From: Jeff Garzik
• Re: [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table
  • From: Jeff Garzik
• Re: [PATCH 22/64] pata_via: fix address setup timings underlocking
  • From: Jeff Garzik
• Re: [PATCH 21/64] pata_serverworks: cleanup cable detection
  • From: Jeff Garzik
• Re: [PATCH 19/64] pata_serverworks: fix PIO setup for the second channel
  • From: Jeff Garzik
• Re: [PATCH 16/64] pata_efar: fix secondary port support
  • From: Jeff Garzik
• Re: [PATCH 15/64] pata_efar: always program master_data before slave_data
  • From: Jeff Garzik
• Re: [PATCH 13/64] pata_cs5535: use correct values for PIO1 and PIO2 data timings
  • From: Jeff Garzik
• Re: [PATCH 08/64] pata_cmd64x: fix PIO setup
  • From: Jeff Garzik
• Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Jeff Garzik
• Re: [PATCH 06/64] pata_atiixp: add locking for parallel scanning
  • From: Jeff Garzik
• Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Jeff Garzik
• Re: [PATCH 02/64] pata_ali: documentation fixes
  • From: Jeff Garzik
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Jeff Garzik
• [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Tejun Heo
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.
  • From: Jeff Garzik
• Re: [PATCH] libata: make functions/variables static
  • From: Jeff Garzik
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Jeff Garzik
• Re: [PATCH #upstream 1/2] libata: cleanup ata_sff_interrupt()
  • From: Jeff Garzik
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: retry FS IOs even if it has failed with AC_ERR_INVALID
  • From: Jeff Garzik
• Unreferenced config in kernel (libata-sff.c) source (NO_ATA_LEGACY)
  • From: Christoph Egger
• Re: pata_sch: fix PSTS register reading.
  • From: Sergei Shtylyov
• Re: pata_sch: fix PSTS register reading.
  • From: Alan Cox
• pata_sch: fix PSTS register reading.
  • From: Denis Turischev
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: Tejun Heo
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: thomas schorpp
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Tejun Heo
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Tejun Heo
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• [PATCH] libata: make functions/variables static
  • From: Robert Hancock
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Robert Hancock
• Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.
  • From: Tejun Heo
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Tejun Heo
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Tejun Heo
• Re: Sparse warning in sata_nv.c
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Robert Hancock
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Robert Hancock
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: Tejun Heo
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• [Bug 13399] kernel crash SONY DVD-ROM with cd
  • From: bugzilla-daemon
• [Bug 13399] kernel crash SONY DVD-ROM with cd
  • From: bugzilla-daemon
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• [Bug 11133] PIIX4 DMA timeout issue
  • From: bugzilla-daemon
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: David Miller
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Sergei Shtylyov
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: David Miller
• [Bug 10943] machine doesn't shutdown when ahci sata driver is compiled as module
  • From: bugzilla-daemon
• [Bug 10943] machine doesn't shutdown when ahci sata driver is compiled as module
  • From: bugzilla-daemon
• [Bug 10370] mount failed on ubuntu-8.04_ppc
  • From: bugzilla-daemon
• [Bug 10370] mount failed on ubuntu-8.04_ppc
  • From: bugzilla-daemon
• [Bug 14994] Random Panic/Freeze due to BUG: unable to handle kernel NULL pointer dereference at 00000024(?)
  • From: bugzilla-daemon
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 46/64] ide: add drive->pio_mode field
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 52/64] alim15x3: fix handling of command timings
  • From: David Miller
• Re: [PATCH 54/64] alim15x3: fix handling of UDMA enable bit
  • From: David Miller
• Re: [PATCH 55/64] amd74xx: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 57/64] cs5535: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 59/64] it821x: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 60/64] palm_bk3710: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 62/64] tx493xide: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 63/64] via82cxxx: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 64/64] ide: make ide_get_best_pio_mode() static
  • From: David Miller
• Re: [PATCH 61/64] siimage: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 58/64] cs5536: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 56/64] cmd64x: fix handling of address setup timings
  • From: David Miller
• Re: [PATCH 53/64] alim15x3: fix handling of DMA timings
  • From: David Miller
• Re: [PATCH 51/64] alim15x3: fix handling of address setup timings
  • From: David Miller
• Re: [PATCH 50/64] ide-timings: use ->pio_mode value to determine fastest PIO speed
  • From: David Miller
• Re: [PATCH 49/64] ide: change ->set_dma_mode method parameters
  • From: David Miller
• Re: [PATCH 48/64] ide: change ->set_pio_mode method parameters
  • From: David Miller
• Re: [PATCH 44/64] via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller
  • From: David Miller
• Re: [PATCH 46/64] ide: add drive->pio_mode field
  • From: David Miller
• Re: [PATCH 47/64] ide: add drive->dma_mode field
  • From: David Miller
• Re: [PATCH 45/64] via82cxxx: fix UDMA settings programming
  • From: David Miller
• Re: [PATCH 43/64] via82cxxx: add support for vt8261 and future chips
  • From: David Miller
• Re: [PATCH 42/64] via82cxxx: workaround h/w bugs
  • From: David Miller
• Re: [PATCH 41/64] via82cxxx: fix SATA cable detection
  • From: David Miller
• Re: [PATCH 40/64] ide: add SATA cable detection support
  • From: David Miller
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Ozan Çağlayan
• Re: [PATCH 27/64] alim15x3: add ali_fifo_control() helper
  • From: David Miller
• Re: [PATCH 28/64] alim15x3: remove superfluous locking from ali_set_pio_mode()
  • From: David Miller
• Re: [PATCH 29/64] alim15x3: cleanup ali_cable_detect()
  • From: David Miller
• Re: [PATCH 30/64] amd74xx: don't change UDMA settings when programming PIO timings
  • From: David Miller
• Re: [PATCH 35/64] opti621: remove stale driver history
  • From: David Miller
• Re: [PATCH 33/64] cy82c693: fix PIO timings calculations
  • From: David Miller
• Re: [PATCH 38/64] serverworks: add missing pci_dev_put() call
  • From: David Miller
• Re: [PATCH 36/64] pdc202xx_old: add ->init_hwif method
  • From: David Miller
• Re: [PATCH 39/64] via82cxxx: vx855 is a single channel controller
  • From: David Miller
• Re: [PATCH 37/64] serverworks: cleanup svwks_udma_filter()
  • From: David Miller
• Re: [PATCH 34/64] cy82c693: remove stale driver history
  • From: David Miller
• Re: [PATCH 32/64] cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
  • From: David Miller
• Re: [PATCH 31/64] cmd64x: fix PIO and MWDMA timings calculations
  • From: David Miller
• Re: [PATCH 26/64] alim15x3: fix PIO timings calculations
  • From: David Miller
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: David Miller
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: [PATCH 24/64] ide: fix for ide_timing quantisation errors
  • From: David Miller
• Re: JMB363 false hotplug detections
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: MSI broken in libata?
  • From: Robert Hancock
• [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• [PATCH #upstream 1/2] libata: cleanup ata_sff_interrupt()
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: [PATCH 46/64] ide: add drive->pio_mode field
  • From: Sergei Shtylyov
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Sergei Shtylyov
• Re: [PATCH 24/64] ide: fix for ide_timing quantisation errors
  • From: Sergei Shtylyov
• Re: [PATCH 14/64] pata_cypress: fix PIO timings underclocking
  • From: Sergei Shtylyov
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Sergei Shtylyov
• Re: [PATCH 09/64] pata_cmd64x: fix handling of address setup timings
  • From: Sergei Shtylyov
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Sergei Shtylyov
• Re: [PATCH 07/64] pata_atiixp: enable parallel scan
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 04/64] pata_amd: remove bogus code from timing_setup()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/64] pata_ali: cleanup ali_set_piomode()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table
  • From: Alan Cox
• Re: [PATCH 22/64] pata_via: fix address setup timings underlocking
  • From: Alan Cox
• Re: [PATCH 15/64] pata_efar: always program master_data before slave_data
  • From: Alan Cox
• Re: [PATCH 07/64] pata_atiixp: enable parallel scan
  • From: Alan Cox
• Re: [PATCH 04/64] pata_amd: remove bogus code from timing_setup()
  • From: Alan Cox
• Re: [PATCH 03/64] pata_ali: cleanup ali_set_piomode()
  • From: Alan Cox
• [PATCH 02/64] pata_ali: documentation fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/64] pata_atiixp: add locking for parallel scanning
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/64] pata_amd: remove bogus code from timing_setup()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/64] pata_cmd64x: fix handling of address setup timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/64] pata_cs5520: convert to use ->init_host method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/64] pata_cmd64x: remove unused definitions
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/64] pata_cmd64x: cmd648_bmdma_stop() fix
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/64] pata_efar: fix secondary port support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/64] pata_cypress: fix PIO timings underclocking
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/64] pata_efar: add locking for parallel scanning
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 21/64] pata_serverworks: cleanup cable detection
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/64] pata_serverworks: fix error message
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 22/64] pata_via: fix address setup timings underlocking
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 27/64] alim15x3: add ali_fifo_control() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 26/64] alim15x3: fix PIO timings calculations
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 31/64] cmd64x: fix PIO and MWDMA timings calculations
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 32/64] cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 33/64] cy82c693: fix PIO timings calculations
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 36/64] pdc202xx_old: add ->init_hwif method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 35/64] opti621: remove stale driver history
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 34/64] cy82c693: remove stale driver history
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 39/64] via82cxxx: vx855 is a single channel controller
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 38/64] serverworks: add missing pci_dev_put() call
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 42/64] via82cxxx: workaround h/w bugs
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 45/64] via82cxxx: fix UDMA settings programming
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 47/64] ide: add drive->dma_mode field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 46/64] ide: add drive->pio_mode field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 49/64] ide: change ->set_dma_mode method parameters
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 52/64] alim15x3: fix handling of command timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 48/64] ide: change ->set_pio_mode method parameters
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 53/64] alim15x3: fix handling of DMA timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 56/64] cmd64x: fix handling of address setup timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 54/64] alim15x3: fix handling of UDMA enable bit
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 60/64] palm_bk3710: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 63/64] via82cxxx: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 61/64] siimage: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 64/64] ide: make ide_get_best_pio_mode() static
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 62/64] tx493xide: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 59/64] it821x: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 58/64] cs5536: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 57/64] cs5535: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 55/64] amd74xx: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 51/64] alim15x3: fix handling of address setup timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 50/64] ide-timings: use ->pio_mode value to determine fastest PIO speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 44/64] via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 43/64] via82cxxx: add support for vt8261 and future chips
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 41/64] via82cxxx: fix SATA cable detection
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 40/64] ide: add SATA cable detection support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 37/64] serverworks: cleanup svwks_udma_filter()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 28/64] alim15x3: remove superfluous locking from ali_set_pio_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 30/64] amd74xx: don't change UDMA settings when programming PIO timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 29/64] alim15x3: cleanup ali_cable_detect()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 24/64] ide: fix for ide_timing quantisation errors
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/64] pata_serverworks: fix PIO setup for the second channel
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/64] pata_efar: enable parallel scan
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/64] pata_efar: always program master_data before slave_data
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/64] pata_cs5535: use correct values for PIO1 and PIO2 data timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/64] pata_cmd64x: fix PIO setup
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/64] pata_atiixp: enable parallel scan
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/64] pata_ali: cleanup ali_set_piomode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/64] more PATA fixes
  • From: Bartlomiej Zolnierkiewicz
• Re: sata_mv: wrong EDMA error cause when disk unplugged
  • From: Prashant Bhole
• Re: sata_mv: wrong EDMA error cause when disk unplugged
  • From: Caspar Smit
• sata_mv: wrong EDMA error cause when disk unplugged
  • From: Prashant Bhole
• Re: [PATCH] ide/ide-cs: fix order of releasing resources
  • From: David Miller
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: JMB363 false hotplug detections
  • From: Krzysztof Halasa
• Re: silicon image 3124 support PATA
  • From: Robert Hancock
• Re: MSI broken in libata?
  • From: Robert Hancock
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Ozan Çağlayan
• Re: silicon image 3124 support PATA
  • From: amruth pattanada
• Re: JMB363 false hotplug detections (was: ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs)
  • From: Tejun Heo
• [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.
  • From: Bart Hartgers
• [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• [patch 0/2] sata_via: bugfixes for vt6420 and vt6421
  • From: Bart Hartgers
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• Re: [PATCH] ide/ide-cs: fix order of releasing resources
  • From: Wolfram Sang
• Re: JMB363 false hotplug detections
  • From: Krzysztof Halasa
• JMB363 false hotplug detections (was: ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs)
  • From: Robert Hancock
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Krzysztof Halasa
• Re: silicon image 3124 support PATA
  • From: Robert Hancock
• silicon image 3124 support PATA
  • From: amruth pattanada
• Re: SATA_SIL on IXP425 workaround
  • From: Robert Hancock
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Henrique de Moraes Holschuh
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Krzysztof Halasa
• Re: [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Sergei Shtylyov
• Re: [PATCH] ide/ide-cs: fix order of releasing resources
  • From: Wolfram Sang
• Re: [PATCH] ide/ide-cs: fix order of releasing resources
  • From: David Miller
• Re: [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
  • From: Tejun Heo
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• Re: SATA_SIL on IXP425 workaround
  • From: Alan Cox
• Re: SATA_SIL on IXP425 workaround
  • From: Alan Cox
• Re: SATA_SIL on IXP425 workaround
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Don't use UDMA on VIA UDMA33 controller with Transcend SSD
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Henrique de Moraes Holschuh
• Re: SATA_SIL on IXP425 workaround
  • From: Krzysztof Halasa
• Re: [PATCH] Don't use UDMA on VIA UDMA33 controller with Transcend SSD
  • From: Alan Cox
• Re: SATA_SIL on IXP425 workaround
  • From: Alan Cox
• Re: SATA_SIL on IXP425 workaround
  • From: Krzysztof Halasa
• Re: [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
  • From: Jeff Garzik
• Re: [PATCH] Don't use UDMA on VIA UDMA33 controller with Transcend SSD
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] ide/ide-cs: fix order of releasing resources
  • From: Bartlomiej Zolnierkiewicz
• Re: SATA_SIL on IXP425 workaround
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Krzysztof Halasa
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Krzysztof Halasa
• Re: [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Sergei Shtylyov
• Re: [PATCH] ide/ide-cs: fix order of releasing resources
  • From: Dominik Brodowski
• Re: [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
  • From: Sergei Shtylyov
• Re: [PATCH] ide/ide-cs: fix order of releasing resources
  • From: David Miller
• [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: retry FS IOs even if it has failed with AC_ERR_INVALID
  • From: Tejun Heo
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Benjamin Herrenschmidt
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Krzysztof Halasa
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Jeff Garzik
• RE: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Heasley, Seth
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Krzysztof Halasa
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: David Milburn
• Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Mikael Pettersson
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Jeff Garzik
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Robert Hancock
• [PATCH 2.6.32.3] ata_piix: IDE Mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Seth Heasley
• [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Seth Heasley
• Re: [PATCH #upstream-fixes] ata_piix: enable 32bit PIO on SATA piix
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: retry link resume if necessary
  • From: Jeff Garzik
• Re: [PATCH 2.6.33-rc3] sata_promise: don't classify overruns as HSM errors
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• [PATCH] ide/ide-cs: fix order of releasing resources
  • From: Wolfram Sang
• Re: [PATCH] ide_tape: kill off use of the ->ioctl operation
  • From: David Miller
• Re: Fix Promise UDMA33 IDE driver (pdc202xx_old)
  • From: David Miller
• Re: icside: bring back ->maskproc method
  • From: David Miller
• Re: [PATCH #upstream-fixes] libata: retry link resume if necessary
  • From: Tejun Heo
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: Marc Bejarano
• Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Benjamin Herrenschmidt
• Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata: retry link resume if necessary
  • From: Greg KH
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: René Bolldorf
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: Marc Bejarano
• [Bug 14438] IDE Probe fails to find CD drive
  • From: bugzilla-daemon
• Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Benjamin Herrenschmidt
• Re: Rapidly increasing Load_Cycle_Count on Acer 2930z
  • From: Tejun Heo
• Re: storage fixup laptop model dependent ?
  • From: Tejun Heo
• [PATCH #upstream-fixes] ata_piix: enable 32bit PIO on SATA piix
  • From: Tejun Heo
• Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Benjamin Herrenschmidt
• Re: MSI broken in libata?
  • From: Tejun Heo
• [PATCH #upstream-fixes] libata: retry link resume if necessary
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Robert Hancock
• Re: MSI broken in libata?
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: Fwd: the biggest regression at all
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Tejun Heo
• Re: array failure
  • From: Tejun Heo
• [PATCH 2.6.33-rc3] sata_promise: don't classify overruns as HSM errors
  • From: Mikael Pettersson
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: René Bolldorf
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: James Bottomley
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: Rolf Eike Beer
• Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
  • From: David Miller
• Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
  • From: David Miller
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: René Bolldorf
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: René Bolldorf
• Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: Jeff Garzik
• Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
  • From: Yinghai Lu
• Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
  • From: Torsten Kaiser
• Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
  • From: Robert Hancock
• Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
  • From: Torsten Kaiser
• Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
  • From: Robert Hancock
• Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
  • From: Peter Huewe
• Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
  • From: David Miller
• Sparse warning in sata_nv.c
  • From: Stephen Hemminger
• New MSI support in sata_sil24 still broken in 2.6.33-rc3
  • From: Torsten Kaiser
• Re: ata error EH in SWNCQ mode, with nVidia MCP55 sata controller and SAMSUNG HD103UJ
  • From: Robert Hancock
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Robert Hancock
• [PATCH] icside: bring back ->maskproc method
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] add PATA host controller support for Cirrus Logic's EP93xx CPUs
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
  • From: Sergei Shtylyov
• [Bug 8567] DMA: Wrong device is disabled
  • From: bugzilla-daemon
• Re: [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• [Bug 7735] DriveReady SeekComplete Error every 5 minutes by plextor CD-R/RW 40/12/40A
  • From: bugzilla-daemon
• [Bug 8567] DMA: Wrong device is disabled
  • From: bugzilla-daemon
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
  • From: Jiri Kosina
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
  • From: David Miller
• Re: 2.9.29.2: ide-tape: panic when probing device at boot
  • From: Jonathan Woithe
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Robert Hancock
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Robert Hancock
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: thomas schorpp
• Re: [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
  • From: Sergei Shtylyov
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Sergei Shtylyov
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• [PATCH] ide_tape: kill off use of the ->ioctl operation
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Bartlomiej Zolnierkiewicz
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Jeff Garzik
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: Mikael Pettersson
• Re: 2.9.29.2: ide-tape: panic when probing device at boot
  • From: Robert Hancock
• Re: 2.9.29.2: ide-tape: panic when probing device at boot
  • From: Borislav Petkov
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: thomas schorpp
• Re: 2.9.29.2: ide-tape: panic when probing device at boot
  • From: Jonathan Woithe
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
  • From: Russell King
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: Mikael Pettersson
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Alan Cox
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Robert Hancock
• Re: pata_pdc202xx_old regression?
  • From: Robert Hancock
• Re: pata_pdc202xx_old regression?
  • From: David A. Sinck
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: pata_pdc202xx_old regression?
  • From: Robert Hancock
• pata_pdc202xx_old regression?
  • From: David A Sinck
• Marvell exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen (was Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?)
  • From: Raman Gupta
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: thomas schorpp
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: thomas schorpp
• [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
  • From: René Bolldorf
• Re: Re: the biggest regression at all
  • From: Robert Hancock
• Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
  • From: Tim Small
• Fwd: the biggest regression at all
  • From: werner
• Re: [Bug #14909] pata_cmd64x broken in 2.6.33-rc1
  • From: Rafael J. Wysocki
• [Bug #14909] pata_cmd64x broken in 2.6.33-rc1
  • From: Rafael J. Wysocki
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: thomas schorpp
• how to flush write back cache of storage driver
  • From: Gao, Yunpeng
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: Mikael Pettersson
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: Tejun Heo
• Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
  • From: Raman Gupta
• Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
  • From: Raman Gupta
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Robert Hancock
• Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
  • From: Robert Hancock
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: Robert Hancock
• HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: thomas schorpp
• Re: Long delays while hibernating
  • From: Pedro Ribeiro
• Re: Long delays while hibernating
  • From: Rafael J. Wysocki
• Re: [PATCH 0/3] AHCI updates: Marvell AHCI PATA works; pata_marvell fate?
  • From: Raman Gupta
• Re: Long delays while hibernating
  • From: Pedro Ribeiro
• Re: Long delays while hibernating
  • From: Rafael J. Wysocki
• Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Benjamin Herrenschmidt
• 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
  • From: Mikael Pettersson
• Re: Long delays while hibernating
  • From: Pedro Ribeiro
• Re: Long delays while hibernating
  • From: Tejun Heo
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: Long delays while hibernating
  • From: Pedro Ribeiro
• Re: Long delays while hibernating
  • From: Tejun Heo
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: Tejun Heo
• MSI broken in libata?
  • From: Torsten Kaiser
• Re: array failure
  • From: Matt Kowalczyk
• array failure
  • From: Matt Kowalczyk
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
  • From: Russell King
• Re: Long delays while hibernating
  • From: Pedro Ribeiro
• Re: Long delays while hibernating
  • From: Pedro Ribeiro
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: Tejun Heo
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: Tejun Heo
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: Long delays while hibernating
  • From: Tejun Heo
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: Tejun Heo
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: Long delays while hibernating
  • From: Pedro Ribeiro
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: Bjarke Istrup Pedersen
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: Tejun Heo
• Re: Long delays while hibernating
  • From: Tejun Heo
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Long delays while hibernating
  • From: Pedro Ribeiro
• sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Gunay
• [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
  • From: peterhuewe
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: fengxiangjun
• Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine
  • From: Robert Hancock
• Re: storage fixup laptop model dependent ?
  • From: Robert Hancock
• Re: Intermittent SATA failures ("link offline, clearing class 1 to NONE")
  • From: Tejun Heo
• Re: Intermittent SATA failures ("link offline, clearing class 1 to NONE")
  • From: Alex Vandiver
• Re: Rapidly increasing Load_Cycle_Count on Acer 2930z
  • From: Daniele
• Re: New equivalent of old ide2= kernel parameter?
  • From: Geert Uytterhoeven
• Re: Rapidly increasing Load_Cycle_Count on Acer 2930z
  • From: Tejun Heo
• Re: Intermittent SATA failures ("link offline, clearing class 1 to NONE")
  • From: Tejun Heo
• Re: storage fixup laptop model dependent ?
  • From: Tejun Heo
• Re: [PATCH] pata_cmd64x: fix overclocking of UDMA0-2 modes
  • From: Jeff Garzik
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: old Plextor CD Writer PX-W1210A is not recognized
  • From: Mario Bachmann
• Re: old Plextor CD Writer PX-W1210A is not recognized
  • From: Robert Hancock
• [PATCH] pata_cmd64x: fix overclocking of UDMA0-2 modes
  • From: Bartlomiej Zolnierkiewicz
• old Plextor CD Writer PX-W1210A is not recognized
  • From: Mario Bachmann
• Re: pata_cmd64x broken in 2.6.33-rc1 on sparc64
  • From: Mikael Pettersson
• Re: pata_cmd64x broken in 2.6.33-rc1 on sparc64
  • From: Alan Cox
• Re: kernel 2.6.31.1 + Sil 3512 + WDC WD5000AAKS-00V1A0 = no NCQ and UDMA5 instead of UDMA6
  • From: Stan Hoeppner
• Re: kernel 2.6.31.1 + Sil 3512 + WDC WD5000AAKS-00V1A0 = no NCQ and UDMA5 instead of UDMA6
  • From: Jeff Garzik
• Re: kernel 2.6.31.1 + Sil 3512 + WDC WD5000AAKS-00V1A0 = no NCQ and UDMA5 instead of UDMA6
  • From: Stan Hoeppner
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Jeff Garzik
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Mike Cui
• Re: pata_cmd64x broken in 2.6.33-rc1 on sparc64
  • From: Jeff Garzik
• Re: pata_cmd64x broken in 2.6.33-rc1 on sparc64
  • From: David Miller
• Re: [git patches] libata updates
  • From: Jeff Garzik
• Re: [git patches] libata updates
  • From: Linus Torvalds
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Robert Hancock
• Re: kernel 2.6.31.1 + Sil 3512 + WDC WD5000AAKS-00V1A0 = no NCQ and UDMA5 instead of UDMA6
  • From: Robert Hancock
• [git patches] libata updates
  • From: Jeff Garzik
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Jeff Garzik
• 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Mike Cui
• Re: Intermittent SATA failures ("link offline, clearing class 1 to NONE")
  • From: Alex Vandiver
• Re: kernel 2.6.31.1 + Sil 3512 + WDC WD5000AAKS-00V1A0 = no NCQ and UDMA5 instead of UDMA6
  • From: Stan Hoeppner
• RE: Possible regression of LBA48 support for piix
  • From: Romain Kubany
• Re: storage fixup laptop model dependent ?
  • From: Xavier
• [Bug 14583] SSD system stall, HSM Violation
  • From: bugzilla-daemon
• [Bug 14583] SSD system stall, HSM Violation
  • From: bugzilla-daemon
• [Bug 14583] SSD system stall, HSM Violation
  • From: bugzilla-daemon
• [Bug 14583] SSD system stall, HSM Violation
  • From: bugzilla-daemon
• [Bug 14583] SSD system stall, HSM Violation
  • From: bugzilla-daemon
• Re: kernel 2.6.31.1 + Sil 3512 + WDC WD5000AAKS-00V1A0 = no NCQ and UDMA5 instead of UDMA6
  • From: Robert Hancock
• [Bug 14583] SSD system stall, HSM Violation
  • From: bugzilla-daemon
• Re: kernel 2.6.31.1 + Sil 3512 + WDC WD5000AAKS-00V1A0 = no NCQ and UDMA5 instead of UDMA6
  • From: Stan Hoeppner