Linux IDE Archive

• Thread Index

• [PATCH 09/11] ahci: Move generic code into libahci
  • From: Anton Vorontsov
• [PATCH 10/11] ahci: Export generic AHCI symbols, turn libahci into a separate module
  • From: Anton Vorontsov
• [PATCH 06/11] ahci: Factor out PCI specifics from ahci_init_controller()
  • From: Anton Vorontsov
• [PATCH 01/11] ahci: Get rid of host->iomap usage
  • From: Anton Vorontsov
• [PATCH 0/11] ahci: Add support for non-PCI devices
  • From: Anton Vorontsov
• Re: [PATCH 09/12] ahci: Introduce ahci_set_em_messages()
  • From: Greg Freemyer
• Re: [PATCH RFC 0/12] ahci: Add support for non-PCI devices
  • From: Jeff Garzik
• Re: [PATCH RFC 0/12] ahci: Add support for non-PCI devices
  • From: Anton Vorontsov
• Re: [PATCH 12/12] ahci: Add platform driver
  • From: Anton Vorontsov
• [Bug 14438] [PATCH] IDE Probe fails to find CD drive
  • From: bugzilla-daemon
• [Bug 14438] [PATCH] IDE Probe fails to find CD drive
  • From: bugzilla-daemon
• [Bug 14438] IDE Probe fails to find CD drive
  • From: bugzilla-daemon
• [Bug 14438] IDE Probe fails to find CD drive
  • From: bugzilla-daemon
• Re: [PATCH 09/12] ahci: Introduce ahci_set_em_messages()
  • From: Jeff Garzik
• Re: [PATCH] Call flush_dcache_page around PIO data transfers in libata-aff.c
  • From: Catalin Marinas
• Re: [PATCH 09/12] ahci: Introduce ahci_set_em_messages()
  • From: Sergei Shtylyov
• Re: [PATCH] Call flush_dcache_page around PIO data transfers in libata-aff.c
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 09/12] ahci: Introduce ahci_set_em_messages()
  • From: Jeff Garzik
• Re: [PATCH RFC 0/12] ahci: Add support for non-PCI devices
  • From: Jeff Garzik
• Re: [PATCH 09/12] ahci: Introduce ahci_set_em_messages()
  • From: Sergei Shtylyov
• Re: [PATCH 3/3] ide: move dcache flushing to generic ide code
  • From: Sebastian Andrzej Siewior
• Re: [PATCH 12/12] ahci: Add platform driver
  • From: Sergei Shtylyov
• [PATCH 02/12] ahci: Get rid of host->iomap usage
  • From: Anton Vorontsov
• [PATCH 03/12] ahci: Factor out PCI specifics from ahci_save_initial_config()
  • From: Anton Vorontsov
• [PATCH 05/12] ahci: Factor out PCI specifics from ahci_reset_controller()
  • From: Anton Vorontsov
• [PATCH 08/12] ahci: Factor out PCI specifics from ahci_print_info()
  • From: Anton Vorontsov
• [PATCH 04/12] ahci: Get rid of pci_dev argument in ahci_save_initial_config()
  • From: Anton Vorontsov
• [PATCH 09/12] ahci: Introduce ahci_set_em_messages()
  • From: Anton Vorontsov
• [PATCH 10/12] ahci: Move PCI code into ahci_pci.c
  • From: Anton Vorontsov
• [PATCH 11/12] ahci: Export generic AHCI symbols
  • From: Anton Vorontsov
• [PATCH 12/12] ahci: Add platform driver
  • From: Anton Vorontsov
• [PATCH 06/12] ahci: Get rid of pci_dev argument in ahci_port_init()
  • From: Anton Vorontsov
• [PATCH 07/12] ahci: Factor out PCI specifics from ahci_init_controller()
  • From: Anton Vorontsov
• [PATCH 01/12] ahci: Fix some sparse warnings
  • From: Anton Vorontsov
• [PATCH RFC 0/12] ahci: Add support for non-PCI devices
  • From: Anton Vorontsov
• Re: [RFC 1/4] libata: cache device select
  • From: Alan Cox
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: [PATCH 3/3] ide: move dcache flushing to generic ide code
  • From: David Miller
• Re: Intel ICH8 errata for ata_piix.c
  • From: Robert Hancock
• [git patches] libata updates for 2.6.34
  • From: Jeff Garzik
• Re: [PATCH] pata_mpc52xx: optimizing code size by change of ATA timing data types
  • From: Jeff Garzik
• Re: [RFC 1/4] libata: cache device select
  • From: Jeff Garzik
• Re: [PATCH] ata: Detect Delkin Devices compact flash
  • From: Jeff Garzik
• Re: [PATCH 2/5] Subject: [PATCH] pata_efar: add locking for parallel scanning
  • From: Jeff Garzik
• Re: [PATCH 3/3] ide: move dcache flushing to generic ide code
  • From: Sebastian Andrzej Siewior
• Intel ICH8 errata for ata_piix.c
  • From: Daniel Nilsson
• Re: [PATCH 3/3] ide: move dcache flushing to generic ide code
  • From: David Miller
• Re: [git patch] atang tree: make SATA Asynchronous Notification work
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patch] atang tree: make SATA Asynchronous Notification work
  • From: Robert Hancock
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• [PATCH 2/3] mips/ide: clean up / minimize dcache flushes
  • From: Sebastian Andrzej Siewior
• [PATCH 3/3] ide: move dcache flushing to generic ide code
  • From: Sebastian Andrzej Siewior
• [PATCH 1/3] mips/ide: flush dcache also if icache does not snoop dcache
  • From: Sebastian Andrzej Siewior
• Fix ide on Swarm and improve it a little
  • From: Sebastian Andrzej Siewior
• [git patch] atang tree: make SATA Asynchronous Notification work
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patch] libata bug fix
  • From: Jeff Garzik
• Re: [git patch] libata bug fix
  • From: Andrew Morton
• [git patch] libata bug fix
  • From: Jeff Garzik
• Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Jeff Garzik
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Jens Axboe
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Mark Lord
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Jens Axboe
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Mark Lord
• RE: SB600 64-bit DMA BIOS misconfiguration (formerly RE: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support)
  • From: Huang, Shane
• RE: SB600 64-bit DMA BIOS misconfiguration (formerly RE: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support)
  • From: Yuhong Bao
• Re: SB600 64-bit DMA BIOS misconfiguration (formerly RE: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support)
  • From: Robert Hancock
• SB600 64-bit DMA BIOS misconfiguration (formerly RE: [PATCH 2.6.34] ehci-hcd: add option to enable 64-bit DMA support)
  • From: Yuhong Bao
• Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Robert Hancock
• [PATCH] ata: Detect Delkin Devices compact flash
  • From: Ben Gardner
• Re: How to reread disk size?
  • From: Asdo
• Re: Delkin Devices CFA not recognized
  • From: Alan Cox
• Delkin Devices CFA not recognized
  • From: Ben Gardner
• Re: [git patch] atang tree: fix 2.6.32 SSD performance regression
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patch] atang tree: fix 2.6.32 SSD performance regression
  • From: Jens Axboe
• Re: [git patch] atang tree: fix 2.6.32 SSD performance regression
  • From: Bartlomiej Zolnierkiewicz
• Re: [git patch] atang tree: enhanced SSD detection
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 1/5] libata: Pass host flags into the pci helper
  • From: Jeff Garzik
• Re: [git patch] atang tree: fix 2.6.32 SSD performance regression
  • From: Jens Axboe
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Jens Axboe
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Jens Axboe
• Re: [git patch] atang tree: enhanced SSD detection
  • From: Jeff Garzik
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Robert Hancock
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Mark Lord
• [git patch] atang tree: fix 2.6.32 SSD performance regression
  • From: Bartlomiej Zolnierkiewicz
• Re: SuperMicro X8DTL-6F motherboard, Intel ICH10 SATA, SiI3726 SATA port multiplier
  • From: Todd Pfaff
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Benjamin S.
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Jens Axboe
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Robert Hancock
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Benjamin S.
• Re: How to reread disk size?
  • From: James Bottomley
• Re: How to reread disk size?
  • From: Asdo
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Robert Hancock
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Benjamin S.
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• [git patch] atang tree: enhanced SSD detection
  • From: Bartlomiej Zolnierkiewicz
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Robert Hancock
• Re: How to reread disk size?
  • From: Robert Hancock
• Re: How to reread disk size?
  • From: Asdo
• Re: How to reread disk size?
  • From: James Bottomley
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Benjamin S.
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: How to reread disk size?
  • From: Asdo
• Re: Kernel Bug in ATA or SMART area
  • From: Axel Uhl
• Re: How to reread disk size?
  • From: Asdo
• SuperMicro X8DTL-6F motherboard, Intel ICH10 SATA, SiI3726 SATA port multiplier
  • From: Todd Pfaff
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• Re: How to reread disk size?
  • From: Robert Hancock
• Re: bad performance with SSD since kernel version 2.6.32
  • From: Robert Hancock
• bad performance with SSD since kernel version 2.6.32
  • From: Benjamin S.
• Re: "raid5:md0: read error not correctable (sector 795463080 on sdf1)" error on controller with SIL 3114
  • From: Håkon Løvdal
• Re: Kernel Bug in ATA or SMART area
  • From: Mikael Pettersson
• Re: Kernel Bug in ATA or SMART area
  • From: Tejun Heo
• Re: Kernel Bug in ATA or SMART area
  • From: Axel Uhl
• How to reread disk size?
  • From: Asdo
• Re: Kernel Bug in ATA or SMART area
  • From: Mikael Pettersson
• Re: Kernel Bug in ATA or SMART area
  • From: Axel Uhl
• Re: [PATCH 1/3] libata: pass host flags into __ata_pci_sff_init_one() helper
  • From: Jeff Garzik
• Re: [PATCH 1/3] libata: pass host flags into __ata_pci_sff_init_one() helper
  • From: Alan Cox
• Re: [PATCH 1/3] libata: pass host flags into __ata_pci_sff_init_one() helper
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 2/3] pata_oldpiix: add locking for parallel scanning
  • From: Alan Cox
• Re: [PATCH 1/3] libata: pass host flags into __ata_pci_sff_init_one() helper
  • From: Alan Cox
• [PATCH 1/3] libata: pass host flags into __ata_pci_sff_init_one() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] pata_oldpiix: add locking for parallel scanning
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/3] pata_oldpiix: enable parallel scan
  • From: Bartlomiej Zolnierkiewicz
• [git patches] atang tree: parallel scanning improvements
  • From: Bartlomiej Zolnierkiewicz
• Re: Kernel Bug in ATA or SMART area
  • From: Mikael Pettersson
• Re: [RFC 1/4] libata: cache device select
  • From: Alan Cox
• Re: ata8.00: log page 10h reported inactive tag 0
  • From: Bjørn Mork
• Re: [RFC 1/4] libata: cache device select
  • From: Mark Lord
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: ata8.00: log page 10h reported inactive tag 0
  • From: Robert Hancock
• Re: storage fixup laptop model dependent ?
  • From: Xavier Chantry
• Re: Kernel Bug in ATA or SMART area
  • From: Axel Uhl
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• Re: [RFC 3/4] libata: Remove excess command issue delays
  • From: Alan Cox
• Re: [RFC 3/4] libata: Remove excess command issue delays
  • From: Sergei Shtylyov
• [PATCH 5/5] pata_efar: Enable PARALLEL_SCAN
  • From: Alan Cox
• [PATCH 4/5] pata_atiixp: enable parallel scan
  • From: Alan Cox
• [PATCH 3/5] Subject: [PATCH] pata_atiixp: add locking for parallel scanning
  • From: Alan Cox
• [PATCH 2/5] Subject: [PATCH] pata_efar: add locking for parallel scanning
  • From: Alan Cox
• [PATCH 1/5] libata: Pass host flags into the pci helper
  • From: Alan Cox
• [RFC 4/4] libata: Make sil680 do its own exec_command posting
  • From: Alan Cox
• [RFC 3/4] libata: Remove excess command issue delays
  • From: Alan Cox
• [RFC 2/4] libata: Remove excess delay in the tf_load path
  • From: Alan Cox
• [RFC 1/4] libata: cache device select
  • From: Alan Cox
• ata8.00: log page 10h reported inactive tag 0
  • From: Bjørn Mork
• Re: sata_mv driver support for Marvell Hercules II controller in newer kernels
  • From: Caspar Smit
• Re: sata_mv driver support for Marvell Hercules II controller in newer kernels
  • From: Mikael Abrahamsson
• Re: sata_mv driver support for Marvell Hercules II controller in newer kernels
  • From: Jeff Garzik
• Re: "raid5:md0: read error not correctable (sector 795463080 on sdf1)" error on controller with SIL 3114
  • From: Håkon Løvdal
• Re: Kernel Bug in ATA or SMART area
  • From: Tejun Heo
• Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Prajakta Gudadhe
• Re: [PATCH] pata_mpc52xx: optimizing code size by change of ATA timing data types
  • From: Grant Likely
• Re: [patch 1/1] Delay on vt6420 when starting ATAPI DMA write
  • From: Tejun Heo
• Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Robert Hancock
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Nikola Ciprich
• [patch 1/1] Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• [patch 0/1] [PATCH v2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Jeff Garzik
• Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Robert Hancock
• Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
  • From: Jeff Garzik
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Jeff Garzik
• Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Jeff Garzik
• Re: [PATCH] libata: Allow pata_legacy to be built on non-ISA but PCI systems
  • From: Jeff Garzik
• Re: [PATCH 2/3] pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets
  • From: Jeff Garzik
• Re: [PATCH 1/3] pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards
  • From: Jeff Garzik
• Re: [PATCH 2/3] pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/3] pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/3] pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/3] pata_pdc202xx_old: update documentation
  • From: Bartlomiej Zolnierkiewicz
• [git patches] atang tree: fix UDMA mode for older Promise controllers
  • From: Bartlomiej Zolnierkiewicz
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Alan Cox
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000
  • From: James Bottomley
• Re: Kernel Bug in ATA or SMART area
  • From: Axel Uhl
• Re: Kernel Bug in ATA or SMART area
  • From: Tejun Heo
• Re: Kernel Bug in ATA or SMART area
  • From: Axel Uhl
• Re: Kernel Bug in ATA or SMART area
  • From: Maciej Rutecki
• Re: port multiplier problem
  • From: Chandra Shekhar Sah
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Tejun Heo
• [Bug 13770] System freeze on XFS filesystem recovery on an external disk
  • From: bugzilla-daemon
• BUG: spinlock recursion on CPU#0, kblockd/0/54
  • From: Prashant Bhole
• storage-fixup, info for WDC WD5000AAVS on ASUS M3A78PRO
  • From: Roman Fietze
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Tim
• Re: "raid5:md0: read error not correctable (sector 795463080 on sdf1)" error on controller with SIL 3114
  • From: Robert Hancock
• Linux Storage and Filesystems Summit 8-9 August
  • From: James Bottomley
• Re: 520 Bytes sector size
  • From: Dan Porat
• WDC WD15EARS-00Z5B1: harddrive which does crazy unloading
  • From: Al Bogner
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Tim Small
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Tim Small
• "raid5:md0: read error not correctable (sector 795463080 on sdf1)" error on controller with SIL 3114
  • From: Håkon Løvdal
• [PATCH] libata: Allow pata_legacy to be built on non-ISA but PCI systems
  • From: Alan Cox
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Tejun Heo
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Tejun Heo
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Tejun Heo
• Re: 520 Bytes sector size
  • From: Mark Lord
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Robert Hancock
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Sergey Matyukevich
• Re: 520 Bytes sector size
  • From: Dan Porat
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Mark Lord
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Tim Small
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Mark Lord
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Tim Small
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Tim Small
• Re: [kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]
  • From: Tejun Heo
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Tejun Heo
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Tejun Heo
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Robert Hancock
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Mark Lord
• Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
  • From: Randy Dunlap
• Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
  • From: Christoph Egger
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Justin Piszcz
• SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Tim Small
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Tim Small
• Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
  • From: Sergei Shtylyov
• Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
  • From: Justin Piszcz
• Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
  • From: Frans Pop
• [PATCH] non-existant config in kernel source (CONFIG_AHCI)
  • From: Christoph Egger
• Re: port multiplier problem
  • From: Tejun Heo
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Joe Ceklosky
• [git patches] libata fixes
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: James Bottomley
• Re: port multiplier problem
  • From: Grant Grundler
• Re: port multiplier problem
  • From: Chandra Shekhar Sah
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Catalin Marinas
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: James Bottomley
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Catalin Marinas
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Mark Lord
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Mark Lord
• Re: [git patches] new hardware support for atang tree
  • From: Ben Dooks
• [git patches] Proposed libata updates for 2.6.33-rc
  • From: Jeff Garzik
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Joe Perches
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Andrew Morton
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Mark Lord
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Joe Perches
• Re: port multiplier problem
  • From: Tejun Heo
• Re: port multiplier problem
  • From: Tejun Heo
• Re: [PATCH 03/10] drivers/ide: Fix continuation line formats
  • From: David Miller
• Re: port multiplier problem
  • From: Grant Grundler
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Krzysztof Halasa
• Re: [git patches] new hardware support for atang tree
  • From: Jeff Garzik
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Joe Perches
• [git patches] new hardware support for atang tree
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
  • From: Christoph Hellwig
• Re: [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
  • From: Martin K. Petersen
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Alan Cox
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Catalin Marinas
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Alan Cox
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Alan Cox
• Re: [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: James Bottomley
• Re: [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
  • From: Christoph Hellwig
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Jeff Garzik
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Andrew Morton
• Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Mark Lord
• Re: 520 Bytes sector size
  • From: Mark Lord
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: David Miller
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Andrew Morton
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: James Bottomley
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Catalin Marinas
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Catalin Marinas
• Re: 520 Bytes sector size
  • From: Martin K. Petersen
• [Bug 14583] SSD system stall, HSM Violation
  • From: bugzilla-daemon
• Re: [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
  • From: Bartlomiej Zolnierkiewicz
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: David Miller
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Alan Cox
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: James Bottomley
• Re: [PATCH 00/68] ide2libata
  • From: David Miller
• Re: [PATCH 00/68] ide2libata
  • From: Alan Cox
• Re: 520 Bytes sector size
  • From: Alan Cox
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: David Miller
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: James Bottomley
• Re: [PATCH 00/68] ide2libata
  • From: David Miller
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: James Bottomley
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Jeff Garzik
• Re: [PATCH 00/68] ide2libata
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: Andrew Morton
• Re: 520 Bytes sector size
  • From: Martin K. Petersen
• Re: [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
  • From: Jeff Garzik
• Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: James Bottomley
• [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
  • From: akpm
• Re: [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
  • From: Bartlomiej Zolnierkiewicz
• Re: port multiplier problem
  • From: Grant Grundler
• Re: [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
  • From: Alan Cox
• [PATCH 2/2] ide: remove hwif_chipset_t type
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/2] atang update for 02/02/10
  • From: Bartlomiej Zolnierkiewicz
• Re: port multiplier problem
  • From: Grant Grundler
• Re: port multiplier problem
  • From: Chandra Shekhar Sah
• Re: port multiplier problem
  • From: Tejun Heo
• 520 Bytes sector size
  • From: Dan Porat
• [PATCH 02/10] drivers/ata: Fix continuation line formats
  • From: Joe Perches
• [PATCH 3/4] ide: remove obsolete /proc/ide/hdx/ settings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/4] opti621: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 1/4] pata_opti: move code to be re-used by ide2libata to pata_opti.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/4] ide: remove obsolete /proc/ide/ interface
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/4] small atang update
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/68] ide2libata
  • From: David Miller
• Re: [PATCH 00/68] ide2libata
  • From: Alan Cox
• Re: [PATCH 00/68] ide2libata
  • From: David Miller
• Re: [PATCH 00/68] ide2libata
  • From: Alan Cox
• Re: [PATCH 00/68] ide2libata
  • From: David Miller
• Re: [PATCH 00/68] ide2libata
  • From: Alan Cox
• Re: [PATCH 00/68] ide2libata
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/68] ide2libata
  • From: David Miller
• [PATCH 03/10] drivers/ide: Fix continuation line formats
  • From: Joe Perches
• [PATCH 00/10] treewide: Fix format strings that misuse continuations
  • From: Joe Perches
• Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Robert Hancock
• Re: [PATCH 7/9] cs5536: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 7/9] cs5536: convert to ide2libata
  • From: Jeff Garzik
• [PATCH 1/9] pata_cs5536: forward port changes from cs5536
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 4/9] [ata_]piix: move documentation to ata_piix.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 6/9] pata_cs5536: move code to be re-used by ide2libata to pata_cs5536.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 5/9] ide2libata: add missing credits
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 8/9] pata_sil680: move code to be re-used by ide2libata to pata_sil680.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 9/9] siimage: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 7/9] cs5536: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 3/9] siimage: cleanup I/O helpers
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 2/9] pata_sil680: CodingStyle fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 0/9] few more ide2libata patches
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/68] ide2libata
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/68] ide2libata
  • From: Alan Cox
• Re: [PATCH 00/68] ide2libata
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 00/68] ide2libata
  • From: Jeff Garzik
• Re: [kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]
  • From: Robert Hancock
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Robert Hancock
• Re: [PATCH 25/68] it8213: always program control bits
  • From: Sergei Shtylyov
• Re: Corrupt data - RAID sata_sil 3114 chip
  • From: Ulli.Brennenstuhl
• [PATCH 02/68] libata: CodingStyle fixes for ATA timings code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 01/68] piix: add new short cable IDs
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/68] ide: switch to generic ATA timings code
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 07/68] pata_pcmcia: move IDs table to pata_pcmcia.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/68] ata: make ATA timings code independent of libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 08/68] ide-cs: use pata_pcmcia.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/68] ata_piix: move short cable handling to ata_piix.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/68] via82cxxx: use pata_via.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 13/68] alim15x3: use pata_ali.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/68] ide: add hwif->udma_mask field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 18/68] ide: split host->dev table
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 21/68] ide: add hwif->private_data field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 19/68] ide: add hwif->port_no field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 23/68] ide: add drive->class field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 27/68] slc90e66: always program control bits
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 26/68] piix: always program control bits
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 24/68] ide: change ->cable_detect method return type to 'int'
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 28/68] add ide2libata header file
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 29/68] ata_piix: move code to be re-used by ide2libata to ata_piix.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 35/68] pata_artop: move code to be re-used by ide2libata to pata_artop.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 31/68] pata_ali: move code to be re-used by ide2libata to pata_ali.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 33/68] pata_amd: move code to be re-used by ide2libata to pata_amd.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 34/68] amd74xx: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 36/68] aec62xx: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 38/68] atiixp: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 37/68] pata_atiixp: move code to be re-used by ide2libata to pata_atiixp.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 40/68] pata_cmd64x: move code to be re-used by ide2libata to pata_cmd64x.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 43/68] cs5520: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 45/68] cs5530: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 41/68] pata_cmd64x: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 39/68] pata_cmd64x: documentation fix
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 47/68] cs5535: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 49/68] cy82c693: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 50/68] pata_efar: move code to be re-used by ide2libata to pata_efar.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 48/68] pata_cypress: move code to be re-used by ide2libata to pata_cypress.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 44/68] pata_cs5530: move code to be re-used by ide2libata to pata_cs5530.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH] Call flush_dcache_page around PIO data transfers in libata-aff.c
  • From: Catalin Marinas
• [PATCH 55/68] it821x: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 54/68] pata_it821x: move code to be re-used by ide2libata to pata_it821x.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 58/68] pata_sc1200: move code to be re-used by ide2libata to pata_sc1200.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 61/68] serverworks: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 63/68] sl82c105: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 60/68] pata_serverworks: move cable handling to pata_serverworks.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 66/68] pata_via: factor out code for finding ISA bridge
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 65/68] triflex: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 67/68] pata_via: move code to be re-used by ide2libata to pata_via.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 68/68] via82cxxx: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 64/68] pata_triflex: move code to be re-used by ide2libata to pata_triflex.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 62/68] pata_sl82c105: move code to be re-used by ide2libata to pata_sl82c105.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 59/68] sc1200: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 57/68] pdc202xx_old: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 56/68] pata_pdc202xx_old: move code to be re-used by ide2libata to pata_pdc202xx_old.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 53/68] it8213: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 52/68] pata_it8213: move code to be re-used by ide2libata to pata_it8213.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 51/68] slc90e66: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 46/68] pata_cs5535: move code to be re-used by ide2libata to pata_cs5535.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 42/68] pata_cs5520: move code to be re-used by ide2libata to pata_cs5520.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 32/68] alim15x3: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 30/68] piix: convert to ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 25/68] it8213: always program control bits
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 22/68] ide: add drive->devno field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/68] pata_via: move short cable handling to pata_via.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 15/68] sis5513: use pata_sis.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/68] pata_sis: move short cable handling to pata_sis.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/68] pata_ali: move short cable handling to pata_ali.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/68] piix: use ata_piix.h
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/68] ata_piix: factor out short cable detection code to ich_short_ata40()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 05/68] ata: enable XFER_PIO_SLOW mode in ata_timing table
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 03/68] libata: move ATA timings code to ata-timings.c
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 00/68] ide2libata
  • From: Bartlomiej Zolnierkiewicz
• [kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]
  • From: Borislav Petkov
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Mark Lord
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Jarod Wilson
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Nikola Ciprich
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Ric Wheeler
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Nikola Ciprich
• Re: [PATCH] ide: fixed section mismatch warning in cmd640.c
  • From: David Miller
• [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
  • From: Christoph Hellwig
• Re: [PATCH] libata: fix ata_id_logical_per_physical_sectors
  • From: Christoph Hellwig
• Re: [PATCH] libata: fix ata_id_logical_per_physical_sectors
  • From: Sergei Shtylyov
• [PATCH] libata: fix ata_id_logical_per_physical_sectors
  • From: Christoph Hellwig
• [PATCH #upstream-fixes] ahci: add Acer G725 to broken suspend list
  • From: Tejun Heo
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: David Rees
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Mark Lord
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Mark Lord
• Re: 2.6.32.4 - still getting ext4 related crashes
  • From: Ric Wheeler
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Jarod Wilson
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
  • From: Robert Hancock
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Mark Lord
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Alan Cox
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: David Rees
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Jeff Garzik
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: David Rees
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Willy Tarreau
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Alan Cox
• [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
  • From: Vishal Rao
• Re: sata_via.c next-20100125 unsuccess report
  • From: Alexey Lobanov
• Re: sata_via.c next-20100125 unsuccess report
  • From: Bart Hartgers
• sata_via.c next-20100125 unsuccess report
  • From: Alexey Lobanov
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Mike Cui
• [Bug 13345] panic when reading data from IDE CDROM with >= 2.6.29 kernels
  • From: bugzilla-daemon
• [Bug 13345] panic when reading data from IDE CDROM with >= 2.6.29 kernels
  • From: bugzilla-daemon
• [Bug 12874] Seagate STT20000A no longer works
  • From: bugzilla-daemon
• Re: Intermittent SATA link down SStatus 0
  • From: Tejun Heo
• Re: [PATCH] hdparm: Fix error in sector offset reporting
  • From: Mark Lord
• Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
  • From: Robert Hancock
• Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
  • From: Ilia Mirkin
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
  • From: Robert Hancock
• [PATCH] hdparm: Fix error in sector offset reporting
  • From: Martin K. Petersen
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Alan Cox
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Alan Cox
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Robert Hancock
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Robert Hancock
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Cengiz Günay
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Jeff Garzik
• Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: Robert Hancock
• PATA port not detected when using AHCI on Intel 82801GB/GR/GH
  • From: infernix
• Re: MSI broken in libata?
  • From: Robert Hancock
• Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Tejun Heo
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Robert Hancock
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
  • From: Mike Cui
• Re: SATA_SIL on IXP425 workaround
  • From: Krzysztof Halasa
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: SATA_SIL on IXP425 workaround
  • From: Jeff Garzik
• Re: [PATCH 46/64] ide: add drive->pio_mode field
  • From: Sergei Shtylyov
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Alan Cox
• port multiplier problem
  • From: Chandra Nepali
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Jeff Garzik
• Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Jeff Garzik
• Re: Intermittent SATA link down SStatus 0
  • From: Jeff Garzik
• Intermittent SATA link down SStatus 0
  • From: Paul Check
• Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: Intermittent SATA link down SStatus 0
  • From: Paul Check
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Alan Cox
• Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Alan Cox
• Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Bartlomiej Zolnierkiewicz
• Re: SATA_SIL on IXP425 workaround
  • From: Jeff Garzik
• Re: SATA_SIL on IXP425 workaround
  • From: Jeff Garzik
• Re: SATA_SIL on IXP425 workaround
  • From: Jeff Garzik
• WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
  • From: Ilia Mirkin
• Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Jeff Garzik
• [git patch] libata fix
  • From: Jeff Garzik
• Re: [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table
  • From: Jeff Garzik
• Re: [PATCH 22/64] pata_via: fix address setup timings underlocking
  • From: Jeff Garzik
• Re: [PATCH 21/64] pata_serverworks: cleanup cable detection
  • From: Jeff Garzik
• Re: [PATCH 19/64] pata_serverworks: fix PIO setup for the second channel
  • From: Jeff Garzik
• Re: [PATCH 16/64] pata_efar: fix secondary port support
  • From: Jeff Garzik
• Re: [PATCH 15/64] pata_efar: always program master_data before slave_data
  • From: Jeff Garzik
• Re: [PATCH 13/64] pata_cs5535: use correct values for PIO1 and PIO2 data timings
  • From: Jeff Garzik
• Re: [PATCH 08/64] pata_cmd64x: fix PIO setup
  • From: Jeff Garzik
• Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Jeff Garzik
• Re: [PATCH 06/64] pata_atiixp: add locking for parallel scanning
  • From: Jeff Garzik
• Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
  • From: Jeff Garzik
• Re: [PATCH 02/64] pata_ali: documentation fixes
  • From: Jeff Garzik
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Jeff Garzik
• [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Tejun Heo
• Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
  • From: Tejun Heo
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.
  • From: Jeff Garzik
• Re: [PATCH] libata: make functions/variables static
  • From: Jeff Garzik
• Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Jeff Garzik
• Re: [PATCH #upstream 1/2] libata: cleanup ata_sff_interrupt()
  • From: Jeff Garzik
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Jeff Garzik
• Re: [PATCH #upstream-fixes] libata: retry FS IOs even if it has failed with AC_ERR_INVALID
  • From: Jeff Garzik
• Unreferenced config in kernel (libata-sff.c) source (NO_ATA_LEGACY)
  • From: Christoph Egger
• Re: pata_sch: fix PSTS register reading.
  • From: Sergei Shtylyov
• Re: pata_sch: fix PSTS register reading.
  • From: Alan Cox
• pata_sch: fix PSTS register reading.
  • From: Denis Turischev
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: Tejun Heo
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: thomas schorpp
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Tejun Heo
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Tejun Heo
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Bart Hartgers
• [PATCH] libata: make functions/variables static
  • From: Robert Hancock
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Robert Hancock
• Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.
  • From: Tejun Heo
• Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
  • From: Tejun Heo
• Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
  • From: Tejun Heo
• Re: Sparse warning in sata_nv.c
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Robert Hancock
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Robert Hancock
• Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
  • From: Tejun Heo
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• [Bug 13399] kernel crash SONY DVD-ROM with cd
  • From: bugzilla-daemon
• [Bug 13399] kernel crash SONY DVD-ROM with cd
  • From: bugzilla-daemon
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• [Bug 11133] PIIX4 DMA timeout issue
  • From: bugzilla-daemon
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: David Miller
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Sergei Shtylyov
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: David Miller
• [Bug 10943] machine doesn't shutdown when ahci sata driver is compiled as module
  • From: bugzilla-daemon
• [Bug 10943] machine doesn't shutdown when ahci sata driver is compiled as module
  • From: bugzilla-daemon
• [Bug 10370] mount failed on ubuntu-8.04_ppc
  • From: bugzilla-daemon
• [Bug 10370] mount failed on ubuntu-8.04_ppc
  • From: bugzilla-daemon
• [Bug 14994] Random Panic/Freeze due to BUG: unable to handle kernel NULL pointer dereference at 00000024(?)
  • From: bugzilla-daemon
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 46/64] ide: add drive->pio_mode field
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 52/64] alim15x3: fix handling of command timings
  • From: David Miller
• Re: [PATCH 54/64] alim15x3: fix handling of UDMA enable bit
  • From: David Miller
• Re: [PATCH 55/64] amd74xx: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 57/64] cs5535: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 59/64] it821x: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 60/64] palm_bk3710: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 62/64] tx493xide: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 63/64] via82cxxx: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 64/64] ide: make ide_get_best_pio_mode() static
  • From: David Miller
• Re: [PATCH 61/64] siimage: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 58/64] cs5536: use ->pio_mode value to determine pair device speed
  • From: David Miller
• Re: [PATCH 56/64] cmd64x: fix handling of address setup timings
  • From: David Miller
• Re: [PATCH 53/64] alim15x3: fix handling of DMA timings
  • From: David Miller
• Re: [PATCH 51/64] alim15x3: fix handling of address setup timings
  • From: David Miller
• Re: [PATCH 50/64] ide-timings: use ->pio_mode value to determine fastest PIO speed
  • From: David Miller
• Re: [PATCH 49/64] ide: change ->set_dma_mode method parameters
  • From: David Miller
• Re: [PATCH 48/64] ide: change ->set_pio_mode method parameters
  • From: David Miller
• Re: [PATCH 44/64] via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller
  • From: David Miller
• Re: [PATCH 46/64] ide: add drive->pio_mode field
  • From: David Miller
• Re: [PATCH 47/64] ide: add drive->dma_mode field
  • From: David Miller
• Re: [PATCH 45/64] via82cxxx: fix UDMA settings programming
  • From: David Miller
• Re: [PATCH 43/64] via82cxxx: add support for vt8261 and future chips
  • From: David Miller
• Re: [PATCH 42/64] via82cxxx: workaround h/w bugs
  • From: David Miller
• Re: [PATCH 41/64] via82cxxx: fix SATA cable detection
  • From: David Miller
• Re: [PATCH 40/64] ide: add SATA cable detection support
  • From: David Miller
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Ozan Çağlayan
• Re: [PATCH 27/64] alim15x3: add ali_fifo_control() helper
  • From: David Miller
• Re: [PATCH 28/64] alim15x3: remove superfluous locking from ali_set_pio_mode()
  • From: David Miller
• Re: [PATCH 29/64] alim15x3: cleanup ali_cable_detect()
  • From: David Miller
• Re: [PATCH 30/64] amd74xx: don't change UDMA settings when programming PIO timings
  • From: David Miller
• Re: [PATCH 35/64] opti621: remove stale driver history
  • From: David Miller
• Re: [PATCH 33/64] cy82c693: fix PIO timings calculations
  • From: David Miller
• Re: [PATCH 38/64] serverworks: add missing pci_dev_put() call
  • From: David Miller
• Re: [PATCH 36/64] pdc202xx_old: add ->init_hwif method
  • From: David Miller
• Re: [PATCH 39/64] via82cxxx: vx855 is a single channel controller
  • From: David Miller
• Re: [PATCH 37/64] serverworks: cleanup svwks_udma_filter()
  • From: David Miller
• Re: [PATCH 34/64] cy82c693: remove stale driver history
  • From: David Miller
• Re: [PATCH 32/64] cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
  • From: David Miller
• Re: [PATCH 31/64] cmd64x: fix PIO and MWDMA timings calculations
  • From: David Miller
• Re: [PATCH 26/64] alim15x3: fix PIO timings calculations
  • From: David Miller
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: David Miller
• Re: sata_nv times out for BD-ROM iHOS104-08
  • From: Tejun Heo
• Re: [PATCH 24/64] ide: fix for ide_timing quantisation errors
  • From: David Miller
• Re: JMB363 false hotplug detections
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: MSI broken in libata?
  • From: Robert Hancock
• [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
  • From: Tejun Heo
• [PATCH #upstream 1/2] libata: cleanup ata_sff_interrupt()
  • From: Tejun Heo
• Re: MSI broken in libata?
  • From: Torsten Kaiser
• Re: [PATCH 46/64] ide: add drive->pio_mode field
  • From: Sergei Shtylyov
• Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
  • From: Sergei Shtylyov
• Re: [PATCH 24/64] ide: fix for ide_timing quantisation errors
  • From: Sergei Shtylyov
• Re: [PATCH 14/64] pata_cypress: fix PIO timings underclocking
  • From: Sergei Shtylyov
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Sergei Shtylyov
• Re: [PATCH 09/64] pata_cmd64x: fix handling of address setup timings
  • From: Sergei Shtylyov
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
  • From: Sergei Shtylyov
• Re: [PATCH 07/64] pata_atiixp: enable parallel scan
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 04/64] pata_amd: remove bogus code from timing_setup()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 03/64] pata_ali: cleanup ali_set_piomode()
  • From: Bartlomiej Zolnierkiewicz
• Re: [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table
  • From: Alan Cox
• Re: [PATCH 22/64] pata_via: fix address setup timings underlocking
  • From: Alan Cox
• Re: [PATCH 15/64] pata_efar: always program master_data before slave_data
  • From: Alan Cox
• Re: [PATCH 07/64] pata_atiixp: enable parallel scan
  • From: Alan Cox
• Re: [PATCH 04/64] pata_amd: remove bogus code from timing_setup()
  • From: Alan Cox
• Re: [PATCH 03/64] pata_ali: cleanup ali_set_piomode()
  • From: Alan Cox
• [PATCH 02/64] pata_ali: documentation fixes
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 06/64] pata_atiixp: add locking for parallel scanning
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 04/64] pata_amd: remove bogus code from timing_setup()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 09/64] pata_cmd64x: fix handling of address setup timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 12/64] pata_cs5520: convert to use ->init_host method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 11/64] pata_cmd64x: remove unused definitions
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 10/64] pata_cmd64x: cmd648_bmdma_stop() fix
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 16/64] pata_efar: fix secondary port support
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 14/64] pata_cypress: fix PIO timings underclocking
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 17/64] pata_efar: add locking for parallel scanning
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 21/64] pata_serverworks: cleanup cable detection
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 20/64] pata_serverworks: fix error message
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 22/64] pata_via: fix address setup timings underlocking
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 27/64] alim15x3: add ali_fifo_control() helper
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 26/64] alim15x3: fix PIO timings calculations
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 31/64] cmd64x: fix PIO and MWDMA timings calculations
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 32/64] cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 33/64] cy82c693: fix PIO timings calculations
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 36/64] pdc202xx_old: add ->init_hwif method
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 35/64] opti621: remove stale driver history
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 34/64] cy82c693: remove stale driver history
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 39/64] via82cxxx: vx855 is a single channel controller
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 38/64] serverworks: add missing pci_dev_put() call
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 42/64] via82cxxx: workaround h/w bugs
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 45/64] via82cxxx: fix UDMA settings programming
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 47/64] ide: add drive->dma_mode field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 46/64] ide: add drive->pio_mode field
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 49/64] ide: change ->set_dma_mode method parameters
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 52/64] alim15x3: fix handling of command timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 48/64] ide: change ->set_pio_mode method parameters
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 53/64] alim15x3: fix handling of DMA timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 56/64] cmd64x: fix handling of address setup timings
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 54/64] alim15x3: fix handling of UDMA enable bit
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 60/64] palm_bk3710: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 63/64] via82cxxx: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz
• [PATCH 61/64] siimage: use ->pio_mode value to determine pair device speed
  • From: Bartlomiej Zolnierkiewicz