I had the same problem on a 2.6.28. Best, -- Axel Maciej Rutecki wrote:
(CCs added) Is older kernels work fine? Dnia środa, 10 lutego 2010 o 12:10:18 Axel Uhl napisał(a):I get intermittent kernel exceptions, probably related to an issue with the ATA or SMART code in the kernel / modules. I have a cron job that every so many hours captures the disk temperatures. I "hdparm -y" my disks when they are not used. It seems that when the cron job runs that spins up the disks to access their temperature using smartctl, if during this time certain other interactions happen, the kernel raises an exception. The smartctl command I'm using is: /usr/sbin/smartctl -a $devfull >/var/local/snmp/smart-$dev.TMP Here is one such exception from the syslog: Feb 10 06:57:01 homemp3 /USR/SBIN/CRON[18271]: (root) CMD (/etc/snmp/local-snmp-cronjob-spinup) Feb 10 06:57:06 homemp3 vdr: [3293] connect from 127.0.0.1, port 59975 - accepted Feb 10 06:57:06 homemp3 vdr: [3293] closing SVDRP connection Feb 10 06:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen Feb 10 06:57:09 homemp3 kernel: ata5.00: failed command: SMART Feb 10 06:57:09 homemp3 kernel: ata5.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 Feb 10 06:57:09 homemp3 kernel: res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) Feb 10 06:57:09 homemp3 kernel: ata5.00: status: { DRDY } Feb 10 06:57:10 homemp3 kernel: irq 10: nobody cared (try booting with the "irqpoll" option) Feb 10 06:57:10 homemp3 kernel: Pid: 17050, comm: hadam3p_um_6.14 Not tainted 2.6.32.7 #1 Feb 10 06:57:10 homemp3 kernel: Call Trace: Feb 10 06:57:10 homemp3 kernel: [<c128a221>] ? printk+0x18/0x1a Feb 10 06:57:10 homemp3 kernel: [<c103aaf8>] __report_bad_irq+0x27/0x85 Feb 10 06:57:10 homemp3 kernel: [<c103ac9e>] note_interrupt+0x148/0x186 Feb 10 06:57:10 homemp3 kernel: [<c103b292>] handle_level_irq+0x86/0xb1 Feb 10 06:57:10 homemp3 kernel: [<c1004722>] handle_irq+0x1a/0x28 Feb 10 06:57:10 homemp3 kernel: [<c100434c>] do_IRQ+0x33/0x80 Feb 10 06:57:10 homemp3 kernel: [<c11d73fb>] ? pdc_interrupt+0x150/0x3a5 Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 Feb 10 06:57:10 homemp3 kernel: [<c101cd72>] ? __do_softirq+0x33/0xec Feb 10 06:57:10 homemp3 kernel: [<c1039e00>] ? handle_IRQ_event+0x31/0xc1 Feb 10 06:57:10 homemp3 kernel: [<c101ce55>] do_softirq+0x2a/0x2f Feb 10 06:57:10 homemp3 kernel: [<c101cf34>] irq_exit+0x2a/0x2f Feb 10 06:57:10 homemp3 kernel: [<c1004355>] do_IRQ+0x3c/0x80 Feb 10 06:57:10 homemp3 kernel: [<c1003b81>] ? do_device_not_available+0x0/0x48 Feb 10 06:57:10 homemp3 kernel: [<c1003229>] common_interrupt+0x29/0x30 Feb 10 06:57:10 homemp3 kernel: handlers: Feb 10 06:57:10 homemp3 kernel: [<c11d72ab>] (pdc_interrupt+0x0/0x3a5) Feb 10 06:57:10 homemp3 kernel: [<c11d3504>] (ata_sff_interrupt+0x0/0xc4) Feb 10 06:57:10 homemp3 kernel: [<f83a6767>] (azx_interrupt+0x0/0x11b [snd_hda_intel]) Feb 10 06:57:10 homemp3 kernel: [<f8106471>] (usb_hcd_irq+0x0/0x5e [usbcore]) Feb 10 06:57:10 homemp3 kernel: [<f8062bf9>] (e1000_intr+0x0/0xf2 [e1000]) Feb 10 06:57:10 homemp3 kernel: Disabling IRQ #10 Feb 10 06:57:10 homemp3 kernel: ata5: soft resetting link Feb 10 06:57:11 homemp3 kernel: ata5.00: configured for UDMA/133 Feb 10 06:57:11 homemp3 kernel: ata5: EH complete I suppose the hadam3p_um_6.14 command is part of my BOINC installation, doing a climate simulation. However, the problem has also occurred with this program not running. Here's the output of scripts/ver_linux: If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux homemp3 2.6.32.7 #1 Sat Feb 6 10:50:05 CET 2010 i686 GNU/Linux Gnu C 4.3.2 Gnu make 3.81 binutils 2.18.0.20080103 util-linux 2.13.1.1 mount 2.13.1.1 module-init-tools found Linux C Library 2.7 Dynamic linker (ldd) 2.7 Procps 3.2.7 Console-tools 0.2.3 Sh-utils 6.10 udev 125 Modules Loaded ipv6 bsd_comp usb_storage ppp_deflate zlib_deflate ppp_ge neric slhc w83627hf hwmon_vid hwmon i2c_dev saa7134_alsa snd_hda_codec_realtek tuner_simple tuner_types mt352 snd_hda_intel saa7134_dvb snd_hda_codec videobuf_dvb snd_pcm_oss snd_mixer_oss dvb_core snd_pcm snd_seq_oss snd_seq_midi snd_rawmidi snd_seq_midi_event 8250_pnp snd_seq 8250 serial_core snd_timer snd_seq_device saa7134 ehci_hcd ir_common snd v4l2_common videodev v4l1_compat soundcore snd_page_alloc videobuf_dma_sg videobuf_core tveeprom usbcore via_rhine i2c_core e1000 As a result of the exception, the system becomes very unresponsive. Any sort of I/O seems to have very poor response time. Ping times in the gigabit network suddenly take several tens of milliseconds. It seems this may have to do with the IRQ10 being somehow affected, but I'm not sure. /proc/version: Linux version 2.6.32.7 (root@homemp3) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Sat Feb 6 10:50:05 CET 2010 /proc/cpuinfo: processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 4 model name : Intel(R) Celeron(R) CPU 2.80GHz stepping : 9 cpu MHz : 2799.930 cache size : 256 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmovpat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe lm constant_tsc pebs bts pni dtes64 monitor ds_cpl tm2 cid cx16 xtpr lahf_lm bogomips : 5623.13 clflush size : 64 cache_alignment : 128 address sizes : 36 bits physical, 48 bits virtual power management: Output of lcpsi -vvv: 00:00.0 Host bridge: VIA Technologies, Inc. PT880 Ultra/PT894 Host Bridge Subsystem: ASRock Incorporation Device 0308 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort+ >SERR- <PERR+ INTx- Latency: 8, Cache Line Size: 32 bytes Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M] Capabilities: [80] AGP version 3.5 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64 bit- FW- AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<n one> Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: agpgart-via 00:00.1 Host bridge: VIA Technologies, Inc. PT894 Host Bridge Subsystem: ASRock Incorporation Device 1308 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes 00:00.2 Host bridge: VIA Technologies, Inc. PT894 Host Bridge Subsystem: ASRock Incorporation Device 2308 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 0 00:00.4 Host bridge: VIA Technologies, Inc. PT894 Host Bridge Subsystem: ASRock Incorporation Device 4308 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes 00:00.5 PIC: VIA Technologies, Inc. PT894 I/O APIC Interrupt Controller (prog-if 20 [IO(X)-APIC]) Subsystem: ASRock Incorporation Device 5308 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes 00:00.7 Host bridge: VIA Technologies, Inc. PT894 Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00 [ Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000f000-00000fff Memory behind bridge: fc700000-fe7fffff Prefetchable memory behind bridge: cff00000-dfefffff Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [70] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:02.0 PCI bridge: VIA Technologies, Inc. PT890 PCI to PCI Bridge Controller (p rog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 00001000-00001fff Memory behind bridge: fe800000-fe8fffff Prefetchable memory behind bridge: 40000000-401fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupporte d- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPe nd- LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L 0 <64ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk- DLActive - BWMgmt- ABWMgmt- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise + Slot # 10, PowerLimit 75.000000; Interlock- NoCompl- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- L inkChg- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlo ck- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interl ock- Changed: MRL- PresDet- LinkState- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSV isible- RootCap: CRSVisible- RootSta: PME ReqID 0000, PMEStatus- PMEPending- Capabilities: [68] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [70] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [100] Advanced Error Reporting <?> Capabilities: [140] Virtual Channel <?> 00:09.0 Ethernet controller: Intel Corporation 82541PI Gigabit Ethernet Controll er (rev 05) Subsystem: Intel Corporation PRO/1000 GT Desktop Adapter Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32 (63750ns min), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at feba0000 (32-bit, non-prefetchable) [size=128K] Region 1: Memory at feb80000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at cc00 [size=64] Expansion ROM at feb60000 [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [e4] PCI-X non-bridge device Command: DPERE- ERO+ RBC=512 OST=1 Status: Dev=00:00.0 64bit- 133MHz- SCD- USC- DC=simple DMMRBC=20 48 DMOST=1 DMCRS=8 RSCEM- 266MHz- 533MHz- Kernel driver in use: e1000 Kernel modules: e1000 00:0a.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA 300 TX4 ) (rev 02) Subsystem: Promise Technology, Inc. PDC40718 (SATA 300 TX4) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 72 (1000ns min, 4500ns max), Cache Line Size: 4 bytes Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at d400 [size=128] Region 2: I/O ports at c800 [size=256] Region 3: Memory at febfe000 (32-bit, non-prefetchable) [size=4K] Region 4: Memory at febc0000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at febe0000 [disabled] [size=32K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_promise 00:0c.0 Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Vi deo Broadcast Decoder (rev d1) Subsystem: Avermedia Technologies Inc Device 2c05 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin A routed to IRQ 11 Region 0: Memory at febff000 (32-bit, non-prefetchable) [size=2K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: saa7134 Kernel modules: saa7134 00:0f.0 IDE interface: VIA Technologies, Inc. VT8237A SATA 2-Port Controller (re v 80) (prog-if 8f [Master SecP SecO PriP PriO]) Subsystem: ASRock Incorporation Device 0591 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32 Interrupt: pin B routed to IRQ 10 Region 0: I/O ports at e000 [size=8] Region 1: I/O ports at dc00 [size=4] Region 2: I/O ports at d880 [size=8] Region 3: I/O ports at d800 [size=4] Region 4: I/O ports at d480 [size=16] Region 5: I/O ports at d000 [size=256] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sata_via 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/ C PIPC Bus Master IDE (rev 07) (prog-if 8a [Master SecP PriP]) Subsystem: ASRock Incorporation K7VT2/K7VT6 motherboard Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disab led] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disab led] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disab led] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disab led] [size=1] Region 4: I/O ports at fc00 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: VIA_IDE 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI]) Subsystem: ASRock Incorporation K7VT6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 4: I/O ports at e080 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3h ot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI]) Subsystem: ASRock Incorporation K7VT6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 10 Region 4: I/O ports at e400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3h ot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI]) Subsystem: ASRock Incorporation K7VT6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin C routed to IRQ 10 Region 4: I/O ports at e480 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3h ot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev a0) (prog-if 00 [UHCI]) Subsystem: ASRock Incorporation K7VT6 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Interrupt: pin D routed to IRQ 10 Region 4: I/O ports at ec00 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3h ot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHC I]) Subsystem: ASRock Incorporation K7VT6 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 128 bytes Interrupt: pin C routed to IRQ 10 Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=256] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3h ot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: ehci_hcd Kernel modules: ehci-hcd 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237A PCI to ISA Bridge Subsystem: ASRock Incorporation Device 3337 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:11.7 Host bridge: VIA Technologies, Inc. VT8251 Ultra VLINK Controller Subsystem: VIA Technologies, Inc. Device 337e Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort+ >SERR- <PERR+ INTx- Latency: 32 Capabilities: [58] HyperTransport: Interrupt Discovery and Configuration 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c) Subsystem: ASRock Incorporation K7VT6 motherboard Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at e800 [size=256] Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot +,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: via-rhine Kernel modules: via-rhine 00:13.0 Host bridge: VIA Technologies, Inc. VT8237A Host Bridge Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 0 Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed+ 01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX200] ( rev b2) (prog-if 00 [VGA controller]) Subsystem: ABIT Computer Corp. Device 6107 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort - <MAbort- >SERR- <PERR- INTx- Latency: 32 (1250ns min, 250ns max) Interrupt: pin A routed to IRQ 11 Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M] Region 1: Memory at d0000000 (32-bit, prefetchable) [size=128M] Expansion ROM at fe7f0000 [disabled] [size=64K] Capabilities: [60] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot -,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [44] AGP version 2.0 Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64 bit- FW+ AGP3- Rate=x1,x2,x4 Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<n one> Kernel modules: nvidiafb 80:01.0 Audio device: VIA Technologies, Inc. VT1708/A [Azalia HDAC] (VIA High De finition Audio Controller) (rev 10) Subsystem: ASRock Incorporation Device 0888 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Step ping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 10 Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3ho t+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupporte d- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 128 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPe nd+ LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive - BWMgmt- ABWMgmt- Capabilities: [100] #1106 Kernel driver in use: HDA Intel Kernel modules: snd-hda-intel /proc/ioports: 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0064-0064 : keyboard 0070-0077 : rtc 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : 0000:00:0f.1 0170-0177 : via82cxxx 01f0-01f7 : 0000:00:0f.1 01f0-01f7 : via82cxxx 0295-0296 : w83627hf 0295-0296 : pnp 00:09 0295-0296 : w83627hf 02f8-02ff : serial 0376-0376 : 0000:00:0f.1 0376-0376 : via82cxxx 03c0-03df : vga+ 03e0-03e7 : pnp 00:09 03f2-03f2 : floppy 03f4-03f5 : floppy 03f6-03f6 : 0000:00:0f.1 03f6-03f6 : via82cxxx 03f7-03f7 : floppy 03f8-03ff : serial 0400-041f : pnp 00:09 04d0-04d1 : pnp 00:09 0800-087f : pnp 00:09 0800-0803 : ACPI PM1a_EVT_BLK 0804-0805 : ACPI PM1a_CNT_BLK 0808-080b : ACPI PM_TMR 0810-0815 : ACPI CPU throttle 0820-0823 : ACPI GPE0_BLK 0cf8-0cff : PCI conf1 1000-1fff : PCI Bus 0000:02 c800-c8ff : 0000:00:0a.0 cc00-cc3f : 0000:00:09.0 cc00-cc3f : e1000 d000-d0ff : 0000:00:0f.0 d000-d0ff : sata_via d400-d47f : 0000:00:0a.0 d480-d48f : 0000:00:0f.0 d480-d48f : sata_via d800-d803 : 0000:00:0f.0 d800-d803 : sata_via d880-d887 : 0000:00:0f.0 d880-d887 : sata_via dc00-dc03 : 0000:00:0f.0 dc00-dc03 : sata_via e000-e007 : 0000:00:0f.0 e000-e007 : sata_via e080-e09f : 0000:00:10.0 e400-e41f : 0000:00:10.1 e480-e49f : 0000:00:10.2 e800-e8ff : 0000:00:12.0 e800-e8ff : via-rhine ec00-ec1f : 0000:00:10.3 fc00-fc0f : 0000:00:0f.1 fc00-fc0f : via82cxxx /proc/iomem: 00000000-0000ffff : reserved 00010000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000cc7ff : Video ROM 000cc800-000d17ff : Adapter ROM 000d1800-000d27ff : Adapter ROM 000e6000-000fffff : reserved 000f0000-000fffff : System ROM 00100000-3ffaffff : System RAM 01000000-0128c677 : Kernel code 0128c678-0138f533 : Kernel data 013e0000-014131ff : Kernel bss 3ffb0000-3ffbffff : ACPI Tables 3ffc0000-3ffeffff : ACPI Non-volatile Storage 3fff0000-3fffffff : reserved 40000000-401fffff : PCI Bus 0000:02 cff00000-dfefffff : PCI Bus 0000:01 d0000000-d7ffffff : 0000:01:00.0 e0000000-efffffff : PCI MMCONFIG 0 [00-ff] e0000000-efffffff : pnp 00:0e f8000000-fbffffff : 0000:00:00.0 fc700000-fe7fffff : PCI Bus 0000:01 fd000000-fdffffff : 0000:01:00.0 fe7f0000-fe7fffff : 0000:01:00.0 fe800000-fe8fffff : PCI Bus 0000:02 fe9fc000-fe9fffff : 0000:80:01.0 fe9fc000-fe9fffff : pnp 00:09 fe9fc000-fe9fffff : ICH HD audio feb60000-feb7ffff : 0000:00:09.0 feb80000-feb9ffff : 0000:00:09.0 feb80000-feb9ffff : e1000 feba0000-febbffff : 0000:00:09.0 feba0000-febbffff : e1000 febc0000-febdffff : 0000:00:0a.0 febe0000-febe7fff : 0000:00:0a.0 febfe000-febfefff : 0000:00:0a.0 febfe000-febfefff : sata_promise febff000-febff7ff : 0000:00:0c.0 febff000-febff7ff : saa7133[0] febff800-febff8ff : 0000:00:10.4 febff800-febff8ff : ehci_hcd febffc00-febffcff : 0000:00:12.0 febffc00-febffcff : via-rhine fec00000-fec00fff : pnp 00:0a fee00000-fee00fff : reserved fee00000-fee00fff : pnp 00:0a ff780000-ffffffff : reserved ffb80000-ffbfffff : pnp 00:09 fff80000-ffffffff : pnp 00:0f /proc/scsi/scsi: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST31500341AS Rev: CC1H Type: Direct-Access ANSI SCSI revision: 05 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: ST3500630AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 05 Thanks for any hints and best regards, -- Axel
-- Find Security Certificate at http://www.axel-uhl.de/cgi-bin/cacert.cgi
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
