Linux IDE Archive
Thread Index
[
Prev Page
][
Next Page
]
Re: [Bug 15283] New: PROBLEM: kernel 2.6.32-7 will not boot -- could not find /dev/root Dell Vostro 1000
From
: James Bottomley
Re: Kernel Bug in ATA or SMART area
From
: Axel Uhl
Re: Kernel Bug in ATA or SMART area
From
: Tejun Heo
Re: Kernel Bug in ATA or SMART area
From
: Axel Uhl
Re: Kernel Bug in ATA or SMART area
From
: Maciej Rutecki
Re: port multiplier problem
From
: Chandra Shekhar Sah
Re: 2.6.32.4 - still getting ext4 related crashes
From
: Tejun Heo
[Bug 13770] System freeze on XFS filesystem recovery on an external disk
From
: bugzilla-daemon
BUG: spinlock recursion on CPU#0, kblockd/0/54
From
: Prashant Bhole
storage-fixup, info for WDC WD5000AAVS on ASUS M3A78PRO
From
: Roman Fietze
Re: Intermittent SATA link down SStatus 0
From
: Paul Check
Re: Intermittent SATA link down SStatus 0
From
: Tim
Re: "raid5:md0: read error not correctable (sector 795463080 on sdf1)" error on controller with SIL 3114
From
: Robert Hancock
Linux Storage and Filesystems Summit 8-9 August
From
: James Bottomley
Re: 520 Bytes sector size
From
: Dan Porat
WDC WD15EARS-00Z5B1: harddrive which does crazy unloading
From
: Al Bogner
Re: Corrupt data - RAID sata_sil 3114 chip
From
: Tim Small
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Tim Small
"raid5:md0: read error not correctable (sector 795463080 on sdf1)" error on controller with SIL 3114
From
: Håkon Løvdal
[PATCH] libata: Allow pata_legacy to be built on non-ISA but PCI systems
From
: Alan Cox
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Tejun Heo
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Tejun Heo
Re: Corrupt data - RAID sata_sil 3114 chip
From
: Tejun Heo
Re: 520 Bytes sector size
From
: Mark Lord
Re: Corrupt data - RAID sata_sil 3114 chip
From
: Robert Hancock
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Sergey Matyukevich
Re: 520 Bytes sector size
From
: Dan Porat
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Mark Lord
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Tim Small
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Mark Lord
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Tim Small
Re: Corrupt data - RAID sata_sil 3114 chip
From
: Tim Small
Re: [kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]
From
: Tejun Heo
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Tejun Heo
Re: Corrupt data - RAID sata_sil 3114 chip
From
: Tejun Heo
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: Robert Hancock
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Mark Lord
Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
From
: Randy Dunlap
Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
From
: Christoph Egger
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Justin Piszcz
SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Tim Small
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Tim Small
Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
From
: Sergei Shtylyov
Re: [smartmontools-support] SATA drive reset/disable events on ICH7 ata_piix when polling SMART info
From
: Justin Piszcz
Re: [PATCH] non-existant config in kernel source (CONFIG_AHCI)
From
: Frans Pop
[PATCH] non-existant config in kernel source (CONFIG_AHCI)
From
: Christoph Egger
Re: port multiplier problem
From
: Tejun Heo
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: Joe Ceklosky
[git patches] libata fixes
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: James Bottomley
Re: port multiplier problem
From
: Grant Grundler
Re: port multiplier problem
From
: Chandra Shekhar Sah
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Catalin Marinas
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: James Bottomley
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Catalin Marinas
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Mark Lord
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Mark Lord
Re: [git patches] new hardware support for atang tree
From
: Ben Dooks
[git patches] Proposed libata updates for 2.6.33-rc
From
: Jeff Garzik
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Joe Perches
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Andrew Morton
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Mark Lord
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Joe Perches
Re: port multiplier problem
From
: Tejun Heo
Re: port multiplier problem
From
: Tejun Heo
Re: [PATCH 03/10] drivers/ide: Fix continuation line formats
From
: David Miller
Re: port multiplier problem
From
: Grant Grundler
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Krzysztof Halasa
Re: [git patches] new hardware support for atang tree
From
: Jeff Garzik
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Joe Perches
[git patches] new hardware support for atang tree
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
From
: Christoph Hellwig
Re: [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
From
: Martin K. Petersen
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Alan Cox
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Catalin Marinas
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Alan Cox
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Alan Cox
Re: [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: James Bottomley
Re: [PATCH v2] libata: fix ata_id_logical_per_physical_sectors
From
: Christoph Hellwig
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Jeff Garzik
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Andrew Morton
Re: [PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Mark Lord
Re: 520 Bytes sector size
From
: Mark Lord
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: David Miller
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Andrew Morton
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: James Bottomley
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Catalin Marinas
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Catalin Marinas
Re: 520 Bytes sector size
From
: Martin K. Petersen
[Bug 14583] SSD system stall, HSM Violation
From
: bugzilla-daemon
Re: [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
From
: Bartlomiej Zolnierkiewicz
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: David Miller
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Alan Cox
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: James Bottomley
Re: [PATCH 00/68] ide2libata
From
: David Miller
Re: [PATCH 00/68] ide2libata
From
: Alan Cox
Re: 520 Bytes sector size
From
: Alan Cox
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: David Miller
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: James Bottomley
Re: [PATCH 00/68] ide2libata
From
: David Miller
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: James Bottomley
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Jeff Garzik
Re: [PATCH 00/68] ide2libata
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: Andrew Morton
Re: 520 Bytes sector size
From
: Martin K. Petersen
Re: [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
From
: Jeff Garzik
Re: [patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: James Bottomley
[patch for 2.6.33? 1/1] ata: call flush_dcache_page() around PIO data transfers in libata-aff.c
From
: akpm
Re: [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
From
: Bartlomiej Zolnierkiewicz
Re: port multiplier problem
From
: Grant Grundler
Re: [PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
From
: Alan Cox
[PATCH 2/2] ide: remove hwif_chipset_t type
From
: Bartlomiej Zolnierkiewicz
[PATCH 1/2] move host drivers for VLB IDE controllers to staging/out
From
: Bartlomiej Zolnierkiewicz
[PATCH 0/2] atang update for 02/02/10
From
: Bartlomiej Zolnierkiewicz
Re: port multiplier problem
From
: Grant Grundler
Re: port multiplier problem
From
: Chandra Shekhar Sah
Re: port multiplier problem
From
: Tejun Heo
520 Bytes sector size
From
: Dan Porat
[PATCH 02/10] drivers/ata: Fix continuation line formats
From
: Joe Perches
[PATCH 3/4] ide: remove obsolete /proc/ide/hdx/ settings
From
: Bartlomiej Zolnierkiewicz
[PATCH 2/4] opti621: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 1/4] pata_opti: move code to be re-used by ide2libata to pata_opti.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 4/4] ide: remove obsolete /proc/ide/ interface
From
: Bartlomiej Zolnierkiewicz
[PATCH 0/4] small atang update
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 00/68] ide2libata
From
: David Miller
Re: [PATCH 00/68] ide2libata
From
: Alan Cox
Re: [PATCH 00/68] ide2libata
From
: David Miller
Re: [PATCH 00/68] ide2libata
From
: Alan Cox
Re: [PATCH 00/68] ide2libata
From
: David Miller
Re: [PATCH 00/68] ide2libata
From
: Alan Cox
Re: [PATCH 00/68] ide2libata
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 00/68] ide2libata
From
: David Miller
[PATCH 03/10] drivers/ide: Fix continuation line formats
From
: Joe Perches
[PATCH 00/10] treewide: Fix format strings that misuse continuations
From
: Joe Perches
Re: [PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
From
: Robert Hancock
Re: [PATCH 7/9] cs5536: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 7/9] cs5536: convert to ide2libata
From
: Jeff Garzik
[PATCH 1/9] pata_cs5536: forward port changes from cs5536
From
: Bartlomiej Zolnierkiewicz
[PATCH 4/9] [ata_]piix: move documentation to ata_piix.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 6/9] pata_cs5536: move code to be re-used by ide2libata to pata_cs5536.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 5/9] ide2libata: add missing credits
From
: Bartlomiej Zolnierkiewicz
[PATCH 8/9] pata_sil680: move code to be re-used by ide2libata to pata_sil680.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 9/9] siimage: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 7/9] cs5536: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 3/9] siimage: cleanup I/O helpers
From
: Bartlomiej Zolnierkiewicz
[PATCH 2/9] pata_sil680: CodingStyle fixes
From
: Bartlomiej Zolnierkiewicz
[PATCH 0/9] few more ide2libata patches
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 00/68] ide2libata
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 00/68] ide2libata
From
: Alan Cox
Re: [PATCH 00/68] ide2libata
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 00/68] ide2libata
From
: Jeff Garzik
Re: [kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]
From
: Robert Hancock
Re: Corrupt data - RAID sata_sil 3114 chip
From
: Robert Hancock
Re: [PATCH 25/68] it8213: always program control bits
From
: Sergei Shtylyov
Re: Corrupt data - RAID sata_sil 3114 chip
From
: Ulli.Brennenstuhl
[PATCH 02/68] libata: CodingStyle fixes for ATA timings code
From
: Bartlomiej Zolnierkiewicz
[PATCH 01/68] piix: add new short cable IDs
From
: Bartlomiej Zolnierkiewicz
[PATCH 06/68] ide: switch to generic ATA timings code
From
: Bartlomiej Zolnierkiewicz
[PATCH 07/68] pata_pcmcia: move IDs table to pata_pcmcia.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 04/68] ata: make ATA timings code independent of libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 08/68] ide-cs: use pata_pcmcia.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 10/68] ata_piix: move short cable handling to ata_piix.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 17/68] via82cxxx: use pata_via.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 13/68] alim15x3: use pata_ali.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 20/68] ide: add hwif->udma_mask field
From
: Bartlomiej Zolnierkiewicz
[PATCH 18/68] ide: split host->dev table
From
: Bartlomiej Zolnierkiewicz
[PATCH 21/68] ide: add hwif->private_data field
From
: Bartlomiej Zolnierkiewicz
[PATCH 19/68] ide: add hwif->port_no field
From
: Bartlomiej Zolnierkiewicz
[PATCH 23/68] ide: add drive->class field
From
: Bartlomiej Zolnierkiewicz
[PATCH 27/68] slc90e66: always program control bits
From
: Bartlomiej Zolnierkiewicz
[PATCH 26/68] piix: always program control bits
From
: Bartlomiej Zolnierkiewicz
[PATCH 24/68] ide: change ->cable_detect method return type to 'int'
From
: Bartlomiej Zolnierkiewicz
[PATCH 28/68] add ide2libata header file
From
: Bartlomiej Zolnierkiewicz
[PATCH 29/68] ata_piix: move code to be re-used by ide2libata to ata_piix.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 35/68] pata_artop: move code to be re-used by ide2libata to pata_artop.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 31/68] pata_ali: move code to be re-used by ide2libata to pata_ali.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 33/68] pata_amd: move code to be re-used by ide2libata to pata_amd.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 34/68] amd74xx: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 36/68] aec62xx: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 38/68] atiixp: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 37/68] pata_atiixp: move code to be re-used by ide2libata to pata_atiixp.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 40/68] pata_cmd64x: move code to be re-used by ide2libata to pata_cmd64x.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 43/68] cs5520: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 45/68] cs5530: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 41/68] pata_cmd64x: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 39/68] pata_cmd64x: documentation fix
From
: Bartlomiej Zolnierkiewicz
[PATCH 47/68] cs5535: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 49/68] cy82c693: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 50/68] pata_efar: move code to be re-used by ide2libata to pata_efar.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 48/68] pata_cypress: move code to be re-used by ide2libata to pata_cypress.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 44/68] pata_cs5530: move code to be re-used by ide2libata to pata_cs5530.h
From
: Bartlomiej Zolnierkiewicz
[PATCH] Call flush_dcache_page around PIO data transfers in libata-aff.c
From
: Catalin Marinas
[PATCH 55/68] it821x: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 54/68] pata_it821x: move code to be re-used by ide2libata to pata_it821x.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 58/68] pata_sc1200: move code to be re-used by ide2libata to pata_sc1200.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 61/68] serverworks: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 63/68] sl82c105: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 60/68] pata_serverworks: move cable handling to pata_serverworks.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 66/68] pata_via: factor out code for finding ISA bridge
From
: Bartlomiej Zolnierkiewicz
[PATCH 65/68] triflex: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 67/68] pata_via: move code to be re-used by ide2libata to pata_via.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 68/68] via82cxxx: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 64/68] pata_triflex: move code to be re-used by ide2libata to pata_triflex.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 62/68] pata_sl82c105: move code to be re-used by ide2libata to pata_sl82c105.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 59/68] sc1200: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 57/68] pdc202xx_old: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 56/68] pata_pdc202xx_old: move code to be re-used by ide2libata to pata_pdc202xx_old.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 53/68] it8213: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 52/68] pata_it8213: move code to be re-used by ide2libata to pata_it8213.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 51/68] slc90e66: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 46/68] pata_cs5535: move code to be re-used by ide2libata to pata_cs5535.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 42/68] pata_cs5520: move code to be re-used by ide2libata to pata_cs5520.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 32/68] alim15x3: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 30/68] piix: convert to ide2libata
From
: Bartlomiej Zolnierkiewicz
[PATCH 25/68] it8213: always program control bits
From
: Bartlomiej Zolnierkiewicz
[PATCH 22/68] ide: add drive->devno field
From
: Bartlomiej Zolnierkiewicz
[PATCH 16/68] pata_via: move short cable handling to pata_via.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 15/68] sis5513: use pata_sis.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 14/68] pata_sis: move short cable handling to pata_sis.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 12/68] pata_ali: move short cable handling to pata_ali.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 11/68] piix: use ata_piix.h
From
: Bartlomiej Zolnierkiewicz
[PATCH 09/68] ata_piix: factor out short cable detection code to ich_short_ata40()
From
: Bartlomiej Zolnierkiewicz
[PATCH 05/68] ata: enable XFER_PIO_SLOW mode in ata_timing table
From
: Bartlomiej Zolnierkiewicz
[PATCH 03/68] libata: move ATA timings code to ata-timings.c
From
: Bartlomiej Zolnierkiewicz
[PATCH 00/68] ide2libata
From
: Bartlomiej Zolnierkiewicz
[kekcsibe@xxxxxxxxx: PROBLEM: Pioneer DVD-RW DVR-112D does not work since linux 2.6.29]
From
: Borislav Petkov
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Mark Lord
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Jarod Wilson
Re: 2.6.32.4 - still getting ext4 related crashes
From
: Nikola Ciprich
Re: 2.6.32.4 - still getting ext4 related crashes
From
: Ric Wheeler
Re: 2.6.32.4 - still getting ext4 related crashes
From
: Nikola Ciprich
Re: [PATCH] ide: fixed section mismatch warning in cmd640.c
From
: David Miller
[PATCH v2] libata: fix ata_id_logical_per_physical_sectors
From
: Christoph Hellwig
Re: [PATCH] libata: fix ata_id_logical_per_physical_sectors
From
: Christoph Hellwig
Re: [PATCH] libata: fix ata_id_logical_per_physical_sectors
From
: Sergei Shtylyov
[PATCH] libata: fix ata_id_logical_per_physical_sectors
From
: Christoph Hellwig
[PATCH #upstream-fixes] ahci: add Acer G725 to broken suspend list
From
: Tejun Heo
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: David Rees
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Mark Lord
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Mark Lord
Re: 2.6.32.4 - still getting ext4 related crashes
From
: Ric Wheeler
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Jarod Wilson
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
[PATCH] ahci: disable FPDMA auto-activate optimization on NVIDIA AHCI
From
: Robert Hancock
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Mark Lord
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Alan Cox
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: David Rees
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Jeff Garzik
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: David Rees
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Willy Tarreau
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: [PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Alan Cox
[PATCH] ata: Disable NCQ for Crucial M225 brand SSDs
From
: Vishal Rao
Re: sata_via.c next-20100125 unsuccess report
From
: Alexey Lobanov
Re: sata_via.c next-20100125 unsuccess report
From
: Bart Hartgers
sata_via.c next-20100125 unsuccess report
From
: Alexey Lobanov
Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
From
: Mike Cui
[Bug 13345] panic when reading data from IDE CDROM with >= 2.6.29 kernels
From
: bugzilla-daemon
[Bug 13345] panic when reading data from IDE CDROM with >= 2.6.29 kernels
From
: bugzilla-daemon
[Bug 12874] Seagate STT20000A no longer works
From
: bugzilla-daemon
Re: Intermittent SATA link down SStatus 0
From
: Tejun Heo
Re: [PATCH] hdparm: Fix error in sector offset reporting
From
: Mark Lord
Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
From
: Robert Hancock
Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
From
: Ilia Mirkin
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Cengiz Günay
Re: WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
From
: Robert Hancock
[PATCH] hdparm: Fix error in sector offset reporting
From
: Martin K. Petersen
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: infernix
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: infernix
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: Alan Cox
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: infernix
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: infernix
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: Alan Cox
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Tejun Heo
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: Robert Hancock
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: infernix
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: Robert Hancock
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Cengiz Günay
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: infernix
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: Jeff Garzik
Re: PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: Robert Hancock
PATA port not detected when using AHCI on Intel 82801GB/GR/GH
From
: infernix
Re: MSI broken in libata?
From
: Robert Hancock
Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
From
: Tejun Heo
Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
From
: Robert Hancock
Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Tejun Heo
Re: 2.6.32 seemed to have broken nVidia MCP7A sata controller
From
: Mike Cui
Re: SATA_SIL on IXP425 workaround
From
: Krzysztof Halasa
Re: Intermittent SATA link down SStatus 0
From
: Paul Check
Re: Intermittent SATA link down SStatus 0
From
: Paul Check
Re: SATA_SIL on IXP425 workaround
From
: Jeff Garzik
Re: [PATCH 46/64] ide: add drive->pio_mode field
From
: Sergei Shtylyov
Re: Intermittent SATA link down SStatus 0
From
: Paul Check
Re: Intermittent SATA link down SStatus 0
From
: Paul Check
Re: Intermittent SATA link down SStatus 0
From
: Alan Cox
port multiplier problem
From
: Chandra Nepali
Re: Intermittent SATA link down SStatus 0
From
: Paul Check
Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Jeff Garzik
Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
From
: Jeff Garzik
Re: Intermittent SATA link down SStatus 0
From
: Jeff Garzik
Intermittent SATA link down SStatus 0
From
: Paul Check
Intermittent SATA link down SStatus 0
From
: Paul Check
Re: Intermittent SATA link down SStatus 0
From
: Paul Check
Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Alan Cox
Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
From
: Alan Cox
Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
From
: Bartlomiej Zolnierkiewicz
Re: SATA_SIL on IXP425 workaround
From
: Jeff Garzik
Re: SATA_SIL on IXP425 workaround
From
: Jeff Garzik
Re: SATA_SIL on IXP425 workaround
From
: Jeff Garzik
WARNING: at drivers/ata/libata-core.c:5162 ata_qc_issue
From
: Ilia Mirkin
Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
From
: Jeff Garzik
[git patch] libata fix
From
: Jeff Garzik
Re: [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table
From
: Jeff Garzik
Re: [PATCH 22/64] pata_via: fix address setup timings underlocking
From
: Jeff Garzik
Re: [PATCH 21/64] pata_serverworks: cleanup cable detection
From
: Jeff Garzik
Re: [PATCH 19/64] pata_serverworks: fix PIO setup for the second channel
From
: Jeff Garzik
Re: [PATCH 16/64] pata_efar: fix secondary port support
From
: Jeff Garzik
Re: [PATCH 15/64] pata_efar: always program master_data before slave_data
From
: Jeff Garzik
Re: [PATCH 13/64] pata_cs5535: use correct values for PIO1 and PIO2 data timings
From
: Jeff Garzik
Re: [PATCH 08/64] pata_cmd64x: fix PIO setup
From
: Jeff Garzik
Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
From
: Jeff Garzik
Re: [PATCH 06/64] pata_atiixp: add locking for parallel scanning
From
: Jeff Garzik
Re: [PATCH 05/64] pata_atiixp: remove superfluous wrapper function
From
: Jeff Garzik
Re: [PATCH 02/64] pata_ali: documentation fixes
From
: Jeff Garzik
Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
From
: Jeff Garzik
[PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
From
: Tejun Heo
Re: [PATCH #upstream-fixes] libata-sff: remove CONFIG_NO_ATA_LEGACY
From
: Tejun Heo
Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Tejun Heo
Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.
From
: Jeff Garzik
Re: [PATCH] libata: make functions/variables static
From
: Jeff Garzik
Re: [PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Jeff Garzik
Re: [PATCH #upstream 1/2] libata: cleanup ata_sff_interrupt()
From
: Jeff Garzik
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Jeff Garzik
Re: [PATCH #upstream-fixes] libata: retry FS IOs even if it has failed with AC_ERR_INVALID
From
: Jeff Garzik
Unreferenced config in kernel (libata-sff.c) source (NO_ATA_LEGACY)
From
: Christoph Egger
Re: pata_sch: fix PSTS register reading.
From
: Sergei Shtylyov
Re: pata_sch: fix PSTS register reading.
From
: Alan Cox
pata_sch: fix PSTS register reading.
From
: Denis Turischev
Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
From
: Bart Hartgers
Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
From
: Tejun Heo
Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
From
: thomas schorpp
Re: MSI broken in libata?
From
: Torsten Kaiser
Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
From
: Tejun Heo
Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
From
: Tejun Heo
Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
From
: Bart Hartgers
Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
From
: Bart Hartgers
[PATCH] libata: make functions/variables static
From
: Robert Hancock
Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
From
: Robert Hancock
Re: [patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.
From
: Tejun Heo
Re: [patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
From
: Tejun Heo
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Tejun Heo
Re: Sparse warning in sata_nv.c
From
: Tejun Heo
Re: MSI broken in libata?
From
: Robert Hancock
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Robert Hancock
Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
From
: Tejun Heo
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Tejun Heo
[Bug 13399] kernel crash SONY DVD-ROM with cd
From
: bugzilla-daemon
[Bug 13399] kernel crash SONY DVD-ROM with cd
From
: bugzilla-daemon
Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
From
: Bartlomiej Zolnierkiewicz
Re: MSI broken in libata?
From
: Torsten Kaiser
[Bug 11133] PIIX4 DMA timeout issue
From
: bugzilla-daemon
Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
From
: David Miller
Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
From
: Sergei Shtylyov
Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
From
: David Miller
[Bug 10943] machine doesn't shutdown when ahci sata driver is compiled as module
From
: bugzilla-daemon
[Bug 10943] machine doesn't shutdown when ahci sata driver is compiled as module
From
: bugzilla-daemon
[Bug 10370] mount failed on ubuntu-8.04_ppc
From
: bugzilla-daemon
[Bug 10370] mount failed on ubuntu-8.04_ppc
From
: bugzilla-daemon
[Bug 14994] Random Panic/Freeze due to BUG: unable to handle kernel NULL pointer dereference at 00000024(?)
From
: bugzilla-daemon
Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 46/64] ide: add drive->pio_mode field
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 52/64] alim15x3: fix handling of command timings
From
: David Miller
Re: [PATCH 54/64] alim15x3: fix handling of UDMA enable bit
From
: David Miller
Re: [PATCH 55/64] amd74xx: use ->pio_mode value to determine pair device speed
From
: David Miller
Re: [PATCH 57/64] cs5535: use ->pio_mode value to determine pair device speed
From
: David Miller
Re: [PATCH 59/64] it821x: use ->pio_mode value to determine pair device speed
From
: David Miller
Re: [PATCH 60/64] palm_bk3710: use ->pio_mode value to determine pair device speed
From
: David Miller
Re: [PATCH 62/64] tx493xide: use ->pio_mode value to determine pair device speed
From
: David Miller
Re: [PATCH 63/64] via82cxxx: use ->pio_mode value to determine pair device speed
From
: David Miller
Re: [PATCH 64/64] ide: make ide_get_best_pio_mode() static
From
: David Miller
Re: [PATCH 61/64] siimage: use ->pio_mode value to determine pair device speed
From
: David Miller
Re: [PATCH 58/64] cs5536: use ->pio_mode value to determine pair device speed
From
: David Miller
Re: [PATCH 56/64] cmd64x: fix handling of address setup timings
From
: David Miller
Re: [PATCH 53/64] alim15x3: fix handling of DMA timings
From
: David Miller
Re: [PATCH 51/64] alim15x3: fix handling of address setup timings
From
: David Miller
Re: [PATCH 50/64] ide-timings: use ->pio_mode value to determine fastest PIO speed
From
: David Miller
Re: [PATCH 49/64] ide: change ->set_dma_mode method parameters
From
: David Miller
Re: [PATCH 48/64] ide: change ->set_pio_mode method parameters
From
: David Miller
Re: [PATCH 44/64] via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller
From
: David Miller
Re: [PATCH 46/64] ide: add drive->pio_mode field
From
: David Miller
Re: [PATCH 47/64] ide: add drive->dma_mode field
From
: David Miller
Re: [PATCH 45/64] via82cxxx: fix UDMA settings programming
From
: David Miller
Re: [PATCH 43/64] via82cxxx: add support for vt8261 and future chips
From
: David Miller
Re: [PATCH 42/64] via82cxxx: workaround h/w bugs
From
: David Miller
Re: [PATCH 41/64] via82cxxx: fix SATA cable detection
From
: David Miller
Re: [PATCH 40/64] ide: add SATA cable detection support
From
: David Miller
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Ozan Çağlayan
Re: [PATCH 27/64] alim15x3: add ali_fifo_control() helper
From
: David Miller
Re: [PATCH 28/64] alim15x3: remove superfluous locking from ali_set_pio_mode()
From
: David Miller
Re: [PATCH 29/64] alim15x3: cleanup ali_cable_detect()
From
: David Miller
Re: [PATCH 30/64] amd74xx: don't change UDMA settings when programming PIO timings
From
: David Miller
Re: [PATCH 35/64] opti621: remove stale driver history
From
: David Miller
Re: [PATCH 33/64] cy82c693: fix PIO timings calculations
From
: David Miller
Re: [PATCH 38/64] serverworks: add missing pci_dev_put() call
From
: David Miller
Re: [PATCH 36/64] pdc202xx_old: add ->init_hwif method
From
: David Miller
Re: [PATCH 39/64] via82cxxx: vx855 is a single channel controller
From
: David Miller
Re: [PATCH 37/64] serverworks: cleanup svwks_udma_filter()
From
: David Miller
Re: [PATCH 34/64] cy82c693: remove stale driver history
From
: David Miller
Re: [PATCH 32/64] cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
From
: David Miller
Re: [PATCH 31/64] cmd64x: fix PIO and MWDMA timings calculations
From
: David Miller
Re: [PATCH 26/64] alim15x3: fix PIO timings calculations
From
: David Miller
Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
From
: David Miller
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Tejun Heo
Re: [PATCH 24/64] ide: fix for ide_timing quantisation errors
From
: David Miller
Re: JMB363 false hotplug detections
From
: Tejun Heo
Re: MSI broken in libata?
From
: Torsten Kaiser
Re: MSI broken in libata?
From
: Robert Hancock
[PATCH #upstream 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Tejun Heo
[PATCH #upstream 1/2] libata: cleanup ata_sff_interrupt()
From
: Tejun Heo
Re: MSI broken in libata?
From
: Torsten Kaiser
Re: [PATCH 46/64] ide: add drive->pio_mode field
From
: Sergei Shtylyov
Re: [PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
From
: Sergei Shtylyov
Re: [PATCH 24/64] ide: fix for ide_timing quantisation errors
From
: Sergei Shtylyov
Re: [PATCH 14/64] pata_cypress: fix PIO timings underclocking
From
: Sergei Shtylyov
Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
From
: Sergei Shtylyov
Re: [PATCH 09/64] pata_cmd64x: fix handling of address setup timings
From
: Sergei Shtylyov
Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
From
: Sergei Shtylyov
Re: [PATCH 07/64] pata_atiixp: enable parallel scan
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 04/64] pata_amd: remove bogus code from timing_setup()
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 03/64] pata_ali: cleanup ali_set_piomode()
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table
From
: Alan Cox
Re: [PATCH 22/64] pata_via: fix address setup timings underlocking
From
: Alan Cox
Re: [PATCH 15/64] pata_efar: always program master_data before slave_data
From
: Alan Cox
Re: [PATCH 07/64] pata_atiixp: enable parallel scan
From
: Alan Cox
Re: [PATCH 04/64] pata_amd: remove bogus code from timing_setup()
From
: Alan Cox
Re: [PATCH 03/64] pata_ali: cleanup ali_set_piomode()
From
: Alan Cox
[PATCH 02/64] pata_ali: documentation fixes
From
: Bartlomiej Zolnierkiewicz
[PATCH 06/64] pata_atiixp: add locking for parallel scanning
From
: Bartlomiej Zolnierkiewicz
[PATCH 04/64] pata_amd: remove bogus code from timing_setup()
From
: Bartlomiej Zolnierkiewicz
[PATCH 09/64] pata_cmd64x: fix handling of address setup timings
From
: Bartlomiej Zolnierkiewicz
[PATCH 12/64] pata_cs5520: convert to use ->init_host method
From
: Bartlomiej Zolnierkiewicz
[PATCH 11/64] pata_cmd64x: remove unused definitions
From
: Bartlomiej Zolnierkiewicz
[PATCH 10/64] pata_cmd64x: cmd648_bmdma_stop() fix
From
: Bartlomiej Zolnierkiewicz
[PATCH 16/64] pata_efar: fix secondary port support
From
: Bartlomiej Zolnierkiewicz
[PATCH 14/64] pata_cypress: fix PIO timings underclocking
From
: Bartlomiej Zolnierkiewicz
[PATCH 17/64] pata_efar: add locking for parallel scanning
From
: Bartlomiej Zolnierkiewicz
[PATCH 21/64] pata_serverworks: cleanup cable detection
From
: Bartlomiej Zolnierkiewicz
[PATCH 20/64] pata_serverworks: fix error message
From
: Bartlomiej Zolnierkiewicz
[PATCH 22/64] pata_via: fix address setup timings underlocking
From
: Bartlomiej Zolnierkiewicz
[PATCH 27/64] alim15x3: add ali_fifo_control() helper
From
: Bartlomiej Zolnierkiewicz
[PATCH 26/64] alim15x3: fix PIO timings calculations
From
: Bartlomiej Zolnierkiewicz
[PATCH 31/64] cmd64x: fix PIO and MWDMA timings calculations
From
: Bartlomiej Zolnierkiewicz
[PATCH 32/64] cmd64x: remove superfluous checks from cmd64x_set_dma_mode()
From
: Bartlomiej Zolnierkiewicz
[PATCH 33/64] cy82c693: fix PIO timings calculations
From
: Bartlomiej Zolnierkiewicz
[PATCH 36/64] pdc202xx_old: add ->init_hwif method
From
: Bartlomiej Zolnierkiewicz
[PATCH 35/64] opti621: remove stale driver history
From
: Bartlomiej Zolnierkiewicz
[PATCH 34/64] cy82c693: remove stale driver history
From
: Bartlomiej Zolnierkiewicz
[PATCH 39/64] via82cxxx: vx855 is a single channel controller
From
: Bartlomiej Zolnierkiewicz
[PATCH 38/64] serverworks: add missing pci_dev_put() call
From
: Bartlomiej Zolnierkiewicz
[PATCH 42/64] via82cxxx: workaround h/w bugs
From
: Bartlomiej Zolnierkiewicz
[PATCH 45/64] via82cxxx: fix UDMA settings programming
From
: Bartlomiej Zolnierkiewicz
[PATCH 47/64] ide: add drive->dma_mode field
From
: Bartlomiej Zolnierkiewicz
[PATCH 46/64] ide: add drive->pio_mode field
From
: Bartlomiej Zolnierkiewicz
[PATCH 49/64] ide: change ->set_dma_mode method parameters
From
: Bartlomiej Zolnierkiewicz
[PATCH 52/64] alim15x3: fix handling of command timings
From
: Bartlomiej Zolnierkiewicz
[PATCH 48/64] ide: change ->set_pio_mode method parameters
From
: Bartlomiej Zolnierkiewicz
[PATCH 53/64] alim15x3: fix handling of DMA timings
From
: Bartlomiej Zolnierkiewicz
[PATCH 56/64] cmd64x: fix handling of address setup timings
From
: Bartlomiej Zolnierkiewicz
[PATCH 54/64] alim15x3: fix handling of UDMA enable bit
From
: Bartlomiej Zolnierkiewicz
[PATCH 60/64] palm_bk3710: use ->pio_mode value to determine pair device speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 63/64] via82cxxx: use ->pio_mode value to determine pair device speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 61/64] siimage: use ->pio_mode value to determine pair device speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 64/64] ide: make ide_get_best_pio_mode() static
From
: Bartlomiej Zolnierkiewicz
[PATCH 62/64] tx493xide: use ->pio_mode value to determine pair device speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 59/64] it821x: use ->pio_mode value to determine pair device speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 58/64] cs5536: use ->pio_mode value to determine pair device speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 57/64] cs5535: use ->pio_mode value to determine pair device speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 55/64] amd74xx: use ->pio_mode value to determine pair device speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 51/64] alim15x3: fix handling of address setup timings
From
: Bartlomiej Zolnierkiewicz
[PATCH 50/64] ide-timings: use ->pio_mode value to determine fastest PIO speed
From
: Bartlomiej Zolnierkiewicz
[PATCH 44/64] via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller
From
: Bartlomiej Zolnierkiewicz
[PATCH 43/64] via82cxxx: add support for vt8261 and future chips
From
: Bartlomiej Zolnierkiewicz
[PATCH 41/64] via82cxxx: fix SATA cable detection
From
: Bartlomiej Zolnierkiewicz
[PATCH 40/64] ide: add SATA cable detection support
From
: Bartlomiej Zolnierkiewicz
[PATCH 37/64] serverworks: cleanup svwks_udma_filter()
From
: Bartlomiej Zolnierkiewicz
[PATCH 28/64] alim15x3: remove superfluous locking from ali_set_pio_mode()
From
: Bartlomiej Zolnierkiewicz
[PATCH 30/64] amd74xx: don't change UDMA settings when programming PIO timings
From
: Bartlomiej Zolnierkiewicz
[PATCH 29/64] alim15x3: cleanup ali_cable_detect()
From
: Bartlomiej Zolnierkiewicz
[PATCH 25/64] ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute()
From
: Bartlomiej Zolnierkiewicz
[PATCH 23/64] pata_via: store UDMA masks in via_isa_bridges table
From
: Bartlomiej Zolnierkiewicz
[PATCH 24/64] ide: fix for ide_timing quantisation errors
From
: Bartlomiej Zolnierkiewicz
[PATCH 19/64] pata_serverworks: fix PIO setup for the second channel
From
: Bartlomiej Zolnierkiewicz
[PATCH 18/64] pata_efar: enable parallel scan
From
: Bartlomiej Zolnierkiewicz
[PATCH 15/64] pata_efar: always program master_data before slave_data
From
: Bartlomiej Zolnierkiewicz
[PATCH 13/64] pata_cs5535: use correct values for PIO1 and PIO2 data timings
From
: Bartlomiej Zolnierkiewicz
[PATCH 08/64] pata_cmd64x: fix PIO setup
From
: Bartlomiej Zolnierkiewicz
[PATCH 07/64] pata_atiixp: enable parallel scan
From
: Bartlomiej Zolnierkiewicz
[PATCH 05/64] pata_atiixp: remove superfluous wrapper function
From
: Bartlomiej Zolnierkiewicz
[PATCH 03/64] pata_ali: cleanup ali_set_piomode()
From
: Bartlomiej Zolnierkiewicz
[PATCH 01/64] libata: fix CFA handling in ide_timing_compute()
From
: Bartlomiej Zolnierkiewicz
[PATCH 00/64] more PATA fixes
From
: Bartlomiej Zolnierkiewicz
Re: sata_mv: wrong EDMA error cause when disk unplugged
From
: Prashant Bhole
Re: sata_mv: wrong EDMA error cause when disk unplugged
From
: Caspar Smit
sata_mv: wrong EDMA error cause when disk unplugged
From
: Prashant Bhole
Re: [PATCH] ide/ide-cs: fix order of releasing resources
From
: David Miller
Re: MSI broken in libata?
From
: Torsten Kaiser
Re: JMB363 false hotplug detections
From
: Krzysztof Halasa
Re: silicon image 3124 support PATA
From
: Robert Hancock
Re: MSI broken in libata?
From
: Robert Hancock
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Ozan Çağlayan
Re: silicon image 3124 support PATA
From
: amruth pattanada
Re: JMB363 false hotplug detections (was: ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs)
From
: Tejun Heo
[patch 1/2] sata_via: Correctly setup PIO/DMA for pata slave on vt6421.
From
: Bart Hartgers
[patch 2/2] sata_via: Delay on vt6420 when starting ATAPI DMA write
From
: Bart Hartgers
[patch 0/2] sata_via: bugfixes for vt6420 and vt6421
From
: Bart Hartgers
Re: MSI broken in libata?
From
: Torsten Kaiser
Re: sata_nv times out for BD-ROM iHOS104-08
From
: Cengiz Günay
Re: [PATCH] ide/ide-cs: fix order of releasing resources
From
: Wolfram Sang
Re: JMB363 false hotplug detections
From
: Krzysztof Halasa
JMB363 false hotplug detections (was: ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs)
From
: Robert Hancock
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Krzysztof Halasa
Re: silicon image 3124 support PATA
From
: Robert Hancock
silicon image 3124 support PATA
From
: amruth pattanada
Re: SATA_SIL on IXP425 workaround
From
: Robert Hancock
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Henrique de Moraes Holschuh
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Krzysztof Halasa
Re: [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Tejun Heo
Re: [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Sergei Shtylyov
Re: [PATCH] ide/ide-cs: fix order of releasing resources
From
: Wolfram Sang
Re: [PATCH] ide/ide-cs: fix order of releasing resources
From
: David Miller
Re: [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Tejun Heo
Re: [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
From
: Tejun Heo
Re: [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
From
: Tejun Heo
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
Re: SATA_SIL on IXP425 workaround
From
: Alan Cox
Re: SATA_SIL on IXP425 workaround
From
: Alan Cox
Re: SATA_SIL on IXP425 workaround
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH] Don't use UDMA on VIA UDMA33 controller with Transcend SSD
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Henrique de Moraes Holschuh
Re: SATA_SIL on IXP425 workaround
From
: Krzysztof Halasa
Re: [PATCH] Don't use UDMA on VIA UDMA33 controller with Transcend SSD
From
: Alan Cox
Re: SATA_SIL on IXP425 workaround
From
: Alan Cox
Re: SATA_SIL on IXP425 workaround
From
: Krzysztof Halasa
Re: [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
From
: Jeff Garzik
Re: [PATCH] Don't use UDMA on VIA UDMA33 controller with Transcend SSD
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH] ide/ide-cs: fix order of releasing resources
From
: Bartlomiej Zolnierkiewicz
Re: SATA_SIL on IXP425 workaround
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Krzysztof Halasa
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Krzysztof Halasa
Re: [PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Sergei Shtylyov
Re: [PATCH] ide/ide-cs: fix order of releasing resources
From
: Dominik Brodowski
Re: [PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
From
: Sergei Shtylyov
Re: [PATCH] ide/ide-cs: fix order of releasing resources
From
: David Miller
[PATCH #upstream-fixes 2/2] libata: implement spurious irq handling for SFF and apply it to piix
From
: Tejun Heo
[PATCH #upstream-fixes 1/2] libata: cleanup ata_sff_interrupt()
From
: Tejun Heo
[PATCH #upstream-fixes] libata: retry FS IOs even if it has failed with AC_ERR_INVALID
From
: Tejun Heo
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
From
: Benjamin Herrenschmidt
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Krzysztof Halasa
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Jeff Garzik
RE: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Heasley, Seth
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Krzysztof Halasa
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: David Milburn
Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
From
: Mikael Pettersson
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Jeff Garzik
Re: [PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Robert Hancock
[PATCH 2.6.32.3] ata_piix: IDE Mode SATA patch for Intel Cougar Point DeviceIDs
From
: Seth Heasley
[PATCH 2.6.32.3] ahci: AHCI and RAID mode SATA patch for Intel Cougar Point DeviceIDs
From
: Seth Heasley
Re: [PATCH #upstream-fixes] ata_piix: enable 32bit PIO on SATA piix
From
: Jeff Garzik
Re: [PATCH #upstream-fixes] libata: retry link resume if necessary
From
: Jeff Garzik
Re: [PATCH 2.6.33-rc3] sata_promise: don't classify overruns as HSM errors
From
: Jeff Garzik
[git patches] libata fixes
From
: Jeff Garzik
[PATCH] ide/ide-cs: fix order of releasing resources
From
: Wolfram Sang
Re: [PATCH] ide_tape: kill off use of the ->ioctl operation
From
: David Miller
Re: Fix Promise UDMA33 IDE driver (pdc202xx_old)
From
: David Miller
Re: icside: bring back ->maskproc method
From
: David Miller
Re: [PATCH #upstream-fixes] libata: retry link resume if necessary
From
: Tejun Heo
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: Marc Bejarano
Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
From
: Benjamin Herrenschmidt
Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
From
: Tejun Heo
Re: [PATCH #upstream-fixes] libata: retry link resume if necessary
From
: Greg KH
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: René Bolldorf
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: Marc Bejarano
[Bug 14438] IDE Probe fails to find CD drive
From
: bugzilla-daemon
Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
From
: Benjamin Herrenschmidt
Re: Rapidly increasing Load_Cycle_Count on Acer 2930z
From
: Tejun Heo
Re: storage fixup laptop model dependent ?
From
: Tejun Heo
[PATCH #upstream-fixes] ata_piix: enable 32bit PIO on SATA piix
From
: Tejun Heo
Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
From
: Tejun Heo
Re: MSI broken in libata?
From
: Torsten Kaiser
Re: 2.6.33-rc2 pata_macio fails to detect PMac G3 CD-drive
From
: Benjamin Herrenschmidt
Re: MSI broken in libata?
From
: Tejun Heo
[PATCH #upstream-fixes] libata: retry link resume if necessary
From
: Tejun Heo
Re: MSI broken in libata?
From
: Robert Hancock
Re: MSI broken in libata?
From
: Tejun Heo
Re: MSI broken in libata?
From
: Torsten Kaiser
Re: Fwd: the biggest regression at all
From
: Tejun Heo
Re: MSI broken in libata?
From
: Tejun Heo
Re: array failure
From
: Tejun Heo
[PATCH 2.6.33-rc3] sata_promise: don't classify overruns as HSM errors
From
: Mikael Pettersson
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: René Bolldorf
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: James Bottomley
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: Rolf Eike Beer
Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
From
: David Miller
Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
From
: David Miller
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: René Bolldorf
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: René Bolldorf
Re: [PATCH]drivers/ata/libata-eh.c:1509 unneeded memset()
From
: Jeff Garzik
Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
From
: Yinghai Lu
Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
From
: Torsten Kaiser
Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
From
: Robert Hancock
Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
From
: Torsten Kaiser
Re: New MSI support in sata_sil24 still broken in 2.6.33-rc3
From
: Robert Hancock
Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
From
: Peter Huewe
Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
From
: David Miller
Sparse warning in sata_nv.c
From
: Stephen Hemminger
New MSI support in sata_sil24 still broken in 2.6.33-rc3
From
: Torsten Kaiser
Re: ata error EH in SWNCQ mode, with nVidia MCP55 sata controller and SAMSUNG HD103UJ
From
: Robert Hancock
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Robert Hancock
[PATCH] icside: bring back ->maskproc method
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH] add PATA host controller support for Cirrus Logic's EP93xx CPUs
From
: Bartlomiej Zolnierkiewicz
Re: [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
From
: Sergei Shtylyov
[Bug 8567] DMA: Wrong device is disabled
From
: bugzilla-daemon
Re: [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
From
: Russell King
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Russell King
[Bug 7735] DriveReady SeekComplete Error every 5 minutes by plextor CD-R/RW 40/12/40A
From
: bugzilla-daemon
[Bug 8567] DMA: Wrong device is disabled
From
: bugzilla-daemon
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Alan Cox
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Jeff Garzik
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Jeff Garzik
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Alan Cox
Re: [PATCH 2/2] ide: add __init/__exit macros to drivers/ide/scc_pata.c
From
: Jiri Kosina
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Jeff Garzik
Re: [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
From
: David Miller
Re: 2.9.29.2: ide-tape: panic when probing device at boot
From
: Jonathan Woithe
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Robert Hancock
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Robert Hancock
Re: HSM violations from ATA PACKET cmd ABRT errors in initial comms with LG GH22 SATA DVDRW
From
: thomas schorpp
Re: [PATCH] Fix Promise UDMA33 IDE driver (pdc202xx_old)
From
: Sergei Shtylyov
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Jeff Garzik
Re: 2.6.32: Promise UDMA33 card refuses to work in UDMA mode
From
: Jeff Garzik
[Index of Archives]
[Kernel Announce]
[IETF Annouce]
[Security]
[Netfilter]
[Bugtraq]