Commit 6bfff31e77cfa1b13490337e5a4dbaa3407e83ac (libata: kill probe_ent and related helpers) killed ata_device_add() but didn't remove references to it from the libata developer's guide. Commits 9363c3825ea9ad76561eb48a395349dd29211ed6 (libata: rename SFF functions) and 5682ed33aae05d10a25c95633ef9d9c062825888 (libata: rename SFF port ops) renamed the taskfile access methods but didn't update the developer's guide. Commit c9f75b04ed5ed65a058d18a8a8dda50632a96de8 (libata: kill ata_noop_dev_select()) didn't update the developer's guide as well. The guide also refers to the long gone ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), and ata_mmio_data_xfer() -- replace those by the modern ata_sff_data_xfer_noirq(), ata_sff_data_xfer(), and ata_sff_data_xfer32(). Also, remove the reference to non-existant ata_port_stop()... Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx> --- The patch is against the recent Linus' tree. Changes since the previous version: - I've just realized that I forgot to rename the taskfile methods themselves. Documentation/DocBook/libata.tmpl | 49 ++++++++++++-------------------------- 1 file changed, 16 insertions(+), 33 deletions(-) Index: linux-2.6/Documentation/DocBook/libata.tmpl =================================================================== --- linux-2.6.orig/Documentation/DocBook/libata.tmpl +++ linux-2.6/Documentation/DocBook/libata.tmpl @@ -105,10 +105,6 @@ void (*dev_config) (struct ata_port *, s issue of SET FEATURES - XFER MODE, and prior to operation. </para> <para> - Called by ata_device_add() after ata_dev_identify() determines - a device is present. - </para> - <para> This entry may be specified as NULL in ata_port_operations. </para> @@ -152,8 +148,8 @@ unsigned int (*mode_filter) (struct ata_ <sect2><title>Taskfile read/write</title> <programlisting> -void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf); -void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_load) (struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_tf_read) (struct ata_port *ap, struct ata_taskfile *tf); </programlisting> <para> @@ -162,36 +158,35 @@ void (*tf_read) (struct ata_port *ap, st hardware registers / DMA buffers, to obtain the current set of taskfile register values. Most drivers for taskfile-based hardware (PIO or MMIO) use - ata_tf_load() and ata_tf_read() for these hooks. + ata_sff_tf_load() and ata_sff_tf_read() for these hooks. </para> </sect2> <sect2><title>PIO data read/write</title> <programlisting> -void (*data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); +void (*sff_data_xfer) (struct ata_device *, unsigned char *, unsigned int, int); </programlisting> <para> All bmdma-style drivers must implement this hook. This is the low-level operation that actually copies the data bytes during a PIO data transfer. -Typically the driver -will choose one of ata_pio_data_xfer_noirq(), ata_pio_data_xfer(), or -ata_mmio_data_xfer(). +Typically the driver will choose one of ata_sff_data_xfer_noirq(), +ata_sff_data_xfer(), or ata_sff_data_xfer32(). </para> </sect2> <sect2><title>ATA command execute</title> <programlisting> -void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf); +void (*sff_exec_command)(struct ata_port *ap, struct ata_taskfile *tf); </programlisting> <para> causes an ATA command, previously loaded with ->tf_load(), to be initiated in hardware. - Most drivers for taskfile-based hardware use ata_exec_command() + Most drivers for taskfile-based hardware use ata_sff_exec_command() for this hook. </para> @@ -216,8 +211,8 @@ command. <sect2><title>Read specific ATA shadow registers</title> <programlisting> -u8 (*check_status)(struct ata_port *ap); -u8 (*check_altstatus)(struct ata_port *ap); +u8 (*sff_check_status)(struct ata_port *ap); +u8 (*sff_check_altstatus)(struct ata_port *ap); </programlisting> <para> @@ -225,20 +220,14 @@ u8 (*check_altstatus)(struct ata_port hardware. On some hardware, reading the Status register has the side effect of clearing the interrupt condition. Most drivers for taskfile-based hardware use - ata_check_status() for this hook. - </para> - <para> - Note that because this is called from ata_device_add(), at - least a dummy function that clears device interrupts must be - provided for all drivers, even if the controller doesn't - actually have a taskfile status register. + ata_sff_check_status() for this hook. </para> </sect2> <sect2><title>Select ATA device on bus</title> <programlisting> -void (*dev_select)(struct ata_port *ap, unsigned int device); +void (*sff_dev_select)(struct ata_port *ap, unsigned int device); </programlisting> <para> @@ -249,9 +238,7 @@ void (*dev_select)(struct ata_port *ap, </para> <para> Most drivers for taskfile-based hardware use - ata_std_dev_select() for this hook. Controllers which do not - support second drives on a port (such as SATA contollers) will - use ata_noop_dev_select(). + ata_sff_dev_select() for this hook. </para> </sect2> @@ -439,13 +426,13 @@ void (*irq_clear) (struct ata_port *); to struct ata_host_set. </para> <para> - Most legacy IDE drivers use ata_interrupt() for the + Most legacy IDE drivers use ata_sff_interrupt() for the irq_handler hook, which scans all ports in the host_set, determines which queued command was active (if any), and calls - ata_host_intr(ap,qc). + ata_sff_host_intr(ap,qc). </para> <para> - Most legacy IDE drivers use ata_bmdma_irq_clear() for the + Most legacy IDE drivers use ata_sff_irq_clear() for the irq_clear() hook, which simply clears the interrupt and error flags in the DMA status register. </para> @@ -494,10 +481,6 @@ void (*host_stop) (struct ata_host_set * data from port at this time. </para> <para> - Many drivers use ata_port_stop() as this hook, which frees the - PRD table. - </para> - <para> ->host_stop() is called after all ->port_stop() calls have completed. The hook must finalize hardware shutdown, release DMA and other resources, etc. -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html