On Thu, Apr 22, 2010 at 09:23:10PM -0600, Robert Hancock wrote: > Hmm, that seems like this line in drivers/ata/sata_sil24.c: > > /* Set max read request size to 4096. This slightly increases > * write throughput for pci-e variants. > */ > pcie_set_readrq(pdev, 4096); > > Can you try commenting out or deleting that line and rebuilding, and see > if things work better? That's not really a solution, but if it worked, > it would indicate there's something about the system configuration with > that converter card installed that explodes when trying to set the max > read request size. In that case can you post the output of "lspci -vv" > and the full dmesg boot log? This did not solve the problem -- it did stop the alt-sysrq-t trick from working though, so it changed something. Is there an easy way to get a crashdump -- does it require patching the kernel? I've not done this before. I've attached dmesg and lspci output. -- Richard Mawson Mawson IT Services
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.33.2 (root@xxxxxxxxxxxxxxxxxxx) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Thu Apr 22 19:06:15 UTC 2010 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfffb000 (usable) [ 0.000000] BIOS-e820: 00000000bfffb000 - 00000000bffff000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bffff000 - 00000000c0000000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) [ 0.000000] Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS! [ 0.000000] DMI 2.3 present. [ 0.000000] last_pfn = 0xbfffb max_arch_pfn = 0x1000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-C7FFF write-protect [ 0.000000] C8000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask F80000000 write-back [ 0.000000] 1 base 080000000 mask FC0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] PAT not supported by CPU. [ 0.000000] initial memory mapped : 0 - 00a00000 [ 0.000000] found SMP MP-table at [c00f5270] f5270 [ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000 [ 0.000000] 0000000000 - 0000200000 page 4k [ 0.000000] 0000200000 - 0037800000 page 2M [ 0.000000] 0037800000 - 00379fe000 page 4k [ 0.000000] kernel direct mapping tables up to 379fe000 @ 7000-d000 [ 0.000000] RAMDISK: 7f899000 - 7ffef9d1 [ 0.000000] Allocated new RAMDISK: 004e9000 - 00c3f9d1 [ 0.000000] Move RAMDISK from 000000007f899000 - 000000007ffef9d0 to 004e9000 - 00c3f9d0 [ 0.000000] ASUS CUR-DLS detected: force use of acpi=ht [ 0.000000] ACPI: RSDP 000f6250 00014 (v00 ASUS ) [ 0.000000] ACPI: RSDT bfffb000 00030 (v01 ASUS CUR-DLS 30303031 MSFT 31313031) [ 0.000000] ACPI: FACP bfffb100 00074 (v01 ASUS CUR-DLS 30303031 MSFT 31313031) [ 0.000000] ACPI: DSDT bfffb180 032BD (v01 ASUS CUR-DLS 00001000 MSFT 0100000B) [ 0.000000] ACPI: FACS bffff000 00040 [ 0.000000] ACPI: BOOT bfffb040 00028 (v01 ASUS CUR-DLS 30303031 MSFT 31313031) [ 0.000000] ACPI: APIC bfffb080 00068 (v01 ASUS CUR-DLS 30303031 MSFT 31313031) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 2181MB HIGHMEM available. [ 0.000000] 889MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 379fe000 [ 0.000000] low ram: 0 - 379fe000 [ 0.000000] node 0 low ram: 00000000 - 379fe000 [ 0.000000] node 0 bootmap 00009000 - 0000ff40 [ 0.000000] (14 early reservations) ==> bootmem [0000000000 - 00379fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000100000 - 00004e2808] TEXT DATA BSS ==> [0000100000 - 00004e2808] [ 0.000000] #3 [00004e3000 - 00004e8150] BRK ==> [00004e3000 - 00004e8150] [ 0.000000] #4 [00000f5280 - 0000100000] BIOS reserved ==> [00000f5280 - 0000100000] [ 0.000000] #5 [00000f5270 - 00000f5280] MP-table mpf ==> [00000f5270 - 00000f5280] [ 0.000000] #6 [000009f000 - 00000f4e60] BIOS reserved ==> [000009f000 - 00000f4e60] [ 0.000000] #7 [00000f4f7c - 00000f5270] BIOS reserved ==> [00000f4f7c - 00000f5270] [ 0.000000] #8 [00000f4e60 - 00000f4f7c] MP-table mpc ==> [00000f4e60 - 00000f4f7c] [ 0.000000] #9 [0000002000 - 0000003000] TRAMPOLINE ==> [0000002000 - 0000003000] [ 0.000000] #10 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000] [ 0.000000] #11 [0000007000 - 0000009000] PGTABLE ==> [0000007000 - 0000009000] [ 0.000000] #12 [00004e9000 - 0000c3f9d1] NEW RAMDISK ==> [00004e9000 - 0000c3f9d1] [ 0.000000] #13 [0000009000 - 0000010000] BOOTMAP ==> [0000009000 - 0000010000] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000000 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000379fe [ 0.000000] HighMem 0x000379fe -> 0x000bfffb [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000000 -> 0x000000a0 [ 0.000000] 0: 0x00000100 -> 0x000bfffb [ 0.000000] On node 0 totalpages: 786331 [ 0.000000] free_area_init_node: node 0, pgdat c0407440, node_mem_map c1001000 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3968 pages, LIFO batch:0 [ 0.000000] Normal zone: 1748 pages used for memmap [ 0.000000] Normal zone: 221994 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4364 pages used for memmap [ 0.000000] HighMem zone: 554225 pages, LIFO batch:31 [ 0.000000] Using APIC driver default [ 0.000000] ACPI: PM-Timer IO Port: 0xe408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Using ACPI for processor (LAPIC) configuration information [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] Virtual Wire compatibility mode. [ 0.000000] MPTABLE: OEM ID: OEM00000 [ 0.000000] MPTABLE: Product ID: PROD00000000 [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] I/O APIC #2 Version 17 at 0xFEC00000. [ 0.000000] I/O APIC #3 Version 17 at 0xFEC01000. [ 0.000000] Processors: 2 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 32 [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ec00000) [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 13 pages/cpu @c2a00000 s29688 r0 d23560 u1048576 [ 0.000000] pcpu-alloc: s29688 r0 d23560 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 780187 [ 0.000000] Kernel command line: root=/dev/mapper/vg0-dom0_root ro init=/bin/bash [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] Initializing HighMem for node 0 (000379fe:000bfffb) [ 0.000000] Memory: 3107296k/3145708k available (2128k kernel code, 37100k reserved, 1005k data, 320k init, 2234356k highmem) [ 0.000000] virtual kernel memory layout: [ 0.000000] fixmap : 0xfff1f000 - 0xfffff000 ( 896 kB) [ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB) [ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB) [ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB) [ 0.000000] .init : 0xc0410000 - 0xc0460000 ( 320 kB) [ 0.000000] .data : 0xc0314232 - 0xc040f688 (1005 kB) [ 0.000000] .text : 0xc0100000 - 0xc0314232 (2128 kB) [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:512 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1399.808 MHz processor. [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 2799.61 BogoMIPS (lpj=5599232) [ 0.004253] Security Framework initialized [ 0.004345] SELinux: Disabled at boot. [ 0.004448] Mount-cache hash table entries: 512 [ 0.004827] Initializing cgroup subsys ns [ 0.004908] Initializing cgroup subsys cpuacct [ 0.004987] Initializing cgroup subsys devices [ 0.005137] Performance Events: p6 PMU driver. [ 0.005245] ... version: 0 [ 0.005317] ... bit width: 32 [ 0.005390] ... generic registers: 2 [ 0.005462] ... value mask: 00000000ffffffff [ 0.005540] ... max period: 000000007fffffff [ 0.005617] ... fixed-purpose events: 0 [ 0.008017] ... event mask: 0000000000000003 [ 0.008104] Checking 'hlt' instruction... OK. [ 0.024600] Enabling APIC mode: Flat. Using 2 I/O APICs [ 0.024796] ExtINT not setup in hardware but reported by MP table [ 0.025090] BIOS bug, IO-APIC#1 ID 3 is already used!... [ 0.025169] ... fixing up to 1. (tell your hw vendor) [ 0.025470] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.028000] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.028000] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.028000] ..... (found apic 0 pin 0) ... [ 0.069145] ....... works. [ 0.069212] CPU0: Intel(R) Pentium(R) III CPU family 1400MHz stepping 01 [ 0.072000] Booting Node 0, Processors #1 Ok. [ 0.008000] Initializing CPU#1 [ 0.164098] Brought up 2 CPUs [ 0.164239] Total of 2 processors activated (5599.92 BogoMIPS). [ 0.166173] NET: Registered protocol family 16 [ 0.168499] PCI: PCI BIOS revision 2.10 entry at 0xf0a80, last bus=2 [ 0.168585] PCI: Using configuration type 1 for base access [ 0.172784] bio: create slab <bio-0> at 0 [ 0.173163] ACPI: Interpreter disabled. [ 0.173537] vgaarb: loaded [ 0.174121] PCI: Probing PCI hardware [ 0.174195] PCI: Probing PCI hardware (bus 00) [ 0.174323] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.174325] * this clock source is slow. If you are sure your timer does not have [ 0.174328] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.174667] * The chipset may have PM-Timer Bug. Due to workarounds for a bug, [ 0.174669] * this clock source is slow. If you are sure your timer does not have [ 0.174672] * this bug, please use "acpi_pm_good" to disable the workaround [ 0.175027] pci 0000:00:02.0: reg 10: [mem 0xfe000000-0xfe000fff] [ 0.175035] pci 0000:00:02.0: reg 14: [io 0xd800-0xd83f] [ 0.175043] pci 0000:00:02.0: reg 18: [mem 0xfd800000-0xfd8fffff] [ 0.175070] pci 0000:00:02.0: supports D1 D2 [ 0.175074] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot [ 0.175080] pci 0000:00:02.0: PME# disabled [ 0.175170] pci 0000:00:07.0: reg 10: [mem 0xfb000000-0xfbffffff] [ 0.175178] pci 0000:00:07.0: reg 14: [io 0xb800-0xb8ff] [ 0.175187] pci 0000:00:07.0: reg 18: [mem 0xfa800000-0xfa800fff] [ 0.175205] pci 0000:00:07.0: reg 30: [mem 0xfebe0000-0xfebfffff pref] [ 0.175222] pci 0000:00:07.0: supports D1 D2 [ 0.175292] pci 0000:00:0f.1: reg 20: [io 0xb400-0xb40f] [ 0.175322] pci 0000:00:0f.2: reg 10: [mem 0xfa000000-0xfa000fff] [ 0.175423] pci 0000:01:00.0: reg 10: [mem 0xfd000000-0xfd00007f 64bit] [ 0.175445] pci 0000:01:00.0: reg 18: [mem 0xfc800000-0xfc801fff 64bit] [ 0.175458] pci 0000:01:00.0: reg 20: [io 0xc800-0xc87f] [ 0.175521] pci 0000:01:00.0: supports D1 D2 [ 0.175568] pci 0000:00:05.0: PCI bridge to [bus 01-01] [ 0.175651] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.175658] pci 0000:00:05.0: bridge window [mem 0xfc800000-0xfd7fffff] [ 0.176223] vgaarb: device added: PCI:0000:00:07.0,decodes=io+mem,owns=io+mem,locks=none [ 0.177029] PCI: Discovered peer bus 02 [ 0.177237] pci 0000:02:05.0: reg 10: [io 0xb000-0xb0ff] [ 0.177249] pci 0000:02:05.0: reg 14: [mem 0xf9800000-0xf98003ff 64bit] [ 0.177261] pci 0000:02:05.0: reg 1c: [mem 0xf9000000-0xf9001fff 64bit] [ 0.177285] pci 0000:02:05.0: supports D1 D2 [ 0.177313] pci 0000:02:05.1: reg 10: [io 0xa800-0xa8ff] [ 0.177325] pci 0000:02:05.1: reg 14: [mem 0xf8800000-0xf88003ff 64bit] [ 0.177337] pci 0000:02:05.1: reg 1c: [mem 0xf8000000-0xf8001fff 64bit] [ 0.177359] pci 0000:02:05.1: supports D1 D2 [ 0.177656] pci 0000:00:0f.0: ServerWorks IRQ router [1166:0200] [ 0.177751] PCI: pci_cache_line_size set to 32 bytes [ 0.178147] Switching to clocksource tsc [ 0.180000] pnp: PnP ACPI: disabled [ 0.214619] pci 0000:00:05.0: PCI bridge to [bus 01-01] [ 0.214709] pci 0000:00:05.0: bridge window [io 0xc000-0xcfff] [ 0.214795] pci 0000:00:05.0: bridge window [mem 0xfc800000-0xfd7fffff] [ 0.214882] pci 0000:00:05.0: bridge window [mem pref disabled] [ 0.214978] pci 0000:00:05.0: can't find IRQ for PCI INT A; probably buggy MP table [ 0.215103] pci_bus 0000:00: resource 0 [io 0x0000-0xffff] [ 0.215108] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.215114] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff] [ 0.215119] pci_bus 0000:01: resource 1 [mem 0xfc800000-0xfd7fffff] [ 0.215125] pci_bus 0000:02: resource 0 [io 0x0000-0xffff] [ 0.215130] pci_bus 0000:02: resource 1 [mem 0x00000000-0xffffffffffffffff] [ 0.215252] NET: Registered protocol family 2 [ 0.215478] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.216241] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.220894] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.223431] TCP: Hash tables configured (established 131072 bind 65536) [ 0.223530] TCP reno registered [ 0.223615] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.223779] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.227881] NET: Registered protocol family 1 [ 0.228046] pci 0000:00:02.0: Firmware left e100 interrupts enabled; disabling [ 0.228177] pci 0000:00:07.0: Boot video device [ 0.228220] PCI: CLS 32 bytes, default 32 [ 0.228355] Trying to unpack rootfs image as initramfs... [ 0.628557] Freeing initrd memory: 7514k freed [ 0.649988] Simple Boot Flag at 0x3a set to 0x80 [ 0.650418] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.651396] audit: initializing netlink socket (disabled) [ 0.651507] type=2000 audit(1272031804.649:1): initialized [ 0.652023] highmem bounce pool size: 64 pages [ 0.652335] VFS: Disk quotas dquot_6.5.2 [ 0.652466] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.652639] msgmni has been set to 1721 [ 0.653112] alg: No test for stdrng (krng) [ 0.653378] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.653496] io scheduler noop registered [ 0.653569] io scheduler deadline registered [ 0.653674] io scheduler cfq registered (default) [ 0.661906] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.662232] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.662529] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 0.667436] brd: module loaded [ 0.667852] PNP: No PS/2 controller found. Probing ports directly. [ 0.918282] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.918744] mice: PS/2 mouse device common for all mice [ 0.919178] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 0.919303] rtc0: alarms up to one day, 114 bytes nvram [ 0.919465] cpuidle: using governor ladder [ 0.919545] No iBFT detected. [ 0.920198] TCP cubic registered [ 0.920270] NET: Registered protocol family 17 [ 0.920360] Using IPI No-Shortcut mode [ 0.920754] registered taskstats version 1 [ 0.921142] rtc_cmos rtc_cmos: setting system clock to 2010-04-23 14:10:06 UTC (1272031806) [ 0.921354] Freeing unused kernel memory: 320k freed [ 0.940036] input: AT Translated Set 2 keyboard as /class/input/input0 [ 1.450556] SCSI subsystem initialized [ 1.475051] sym53c8xx 0000:02:05.0: PCI->APIC IRQ transform: INT A -> IRQ 24 [ 1.510788] Uniform Multi-Platform E-IDE driver [ 1.561525] serverworks 0000:00:0f.1: IDE controller (0x1166:0x0211 rev 0x00) [ 1.561670] serverworks 0000:00:0f.1: not 100% native mode: will probe irqs later [ 1.561793] ide0: BM-DMA at 0xb400-0xb407 [ 1.561877] ide1: BM-DMA at 0xb408-0xb40f [ 1.561958] Probing IDE interface ide0... [ 1.583147] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 1.583238] e100: Copyright(c) 1999-2006 Intel Corporation [ 1.587617] usbcore: registered new interface driver usbfs [ 1.587788] usbcore: registered new interface driver hub [ 1.610775] usbcore: registered new device driver usb [ 1.615546] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.625669] sym0: <896> rev 0x7 at pci 0000:02:05.0 irq 24 [ 1.627878] sym0: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking [ 1.627962] sym0: open drain IRQ line driver, using on-chip SRAM [ 1.628044] sym0: using LOAD/STORE-based firmware. [ 1.628119] sym0: handling phase mismatch from SCRIPTS. [ 1.629948] sym0: SCSI BUS has been reset. [ 1.635033] scsi0 : sym-2.2.3 [ 1.635429] sym53c8xx 0000:02:05.1: PCI->APIC IRQ transform: INT B -> IRQ 25 [ 1.785098] sym1: <896> rev 0x7 at pci 0000:02:05.1 irq 25 [ 1.787248] sym1: Symbios NVRAM, ID 7, Fast-40, LVD, parity checking [ 1.787332] sym1: open drain IRQ line driver, using on-chip SRAM [ 1.787413] sym1: using LOAD/STORE-based firmware. [ 1.787489] sym1: handling phase mismatch from SCRIPTS. [ 1.789983] sym1: SCSI BUS has been reset. [ 1.794387] scsi1 : sym-2.2.3 [ 1.858305] hda: WDC WD3200JB-00KFA0, ATA DISK drive [ 2.194219] hdb: WDC WD3200JB-00KFA0, ATA DISK drive [ 2.194407] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.194481] hda: MWDMA2 mode selected [ 2.194631] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.194705] hdb: MWDMA2 mode selected [ 2.194862] Probing IDE interface ide1... [ 2.482438] hdc: WDC WD2500SB-01KBA0, ATA DISK drive [ 2.818358] hdd: WDC WD2500SB-01KBA0, ATA DISK drive [ 2.818493] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.819714] hdc: MWDMA2 mode selected [ 2.821047] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4 [ 2.822292] hdd: MWDMA2 mode selected [ 2.823668] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 2.823842] ide1 at 0x170-0x177,0x376 on irq 15 [ 2.824294] e100 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 20 [ 2.847348] e100 0000:00:02.0: PME# disabled [ 2.847798] e100: eth0: e100_probe: addr 0xfe000000, irq 20, MAC addr 00:e0:18:51:e6:be [ 2.847994] ohci_hcd 0000:00:0f.2: PCI->APIC IRQ transform: INT A -> IRQ 30 [ 2.848094] ohci_hcd 0000:00:0f.2: OHCI Host Controller [ 2.848215] ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1 [ 2.848370] ohci_hcd 0000:00:0f.2: irq 30, io mem 0xfa000000 [ 2.876989] libata version 3.00 loaded. [ 2.904429] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.904524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.904639] usb usb1: Product: OHCI Host Controller [ 2.904715] usb usb1: Manufacturer: Linux 2.6.33.2 ohci_hcd [ 2.904795] usb usb1: SerialNumber: 0000:00:0f.2 [ 2.905112] hub 1-0:1.0: USB hub found [ 2.905196] hub 1-0:1.0: 4 ports detected [ 2.952771] ide-gd driver 1.18 [ 2.952913] hda: max request size: 512KiB [ 2.962567] hda: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63 [ 2.962891] hda: cache flushes supported [ 2.963079] hda: hda1 hda2 [ 2.975367] hdb: max request size: 512KiB [ 2.986491] hdb: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63 [ 2.986746] hdb: cache flushes supported [ 2.986906] hdb: hdb1 hdb2 [ 2.997934] hdc: max request size: 512KiB [ 3.023633] hdc: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 [ 3.025736] hdc: cache flushes supported [ 3.025886] hdc: unknown partition table [ 3.040207] hdd: max request size: 512KiB [ 3.063660] hdd: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=30401/255/63 [ 3.065779] hdd: cache flushes supported [ 3.065932] hdd: unknown partition table [ 3.278485] usb 1-2: new low speed USB device using ohci_hcd and address 2 [ 3.497208] md: raid1 personality registered for level 1 [ 3.514623] md: md0 stopped. [ 3.603688] md: bind<hdb1> [ 3.604173] md: bind<hda1> [ 3.623974] raid1: raid set md0 active with 2 out of 2 mirrors [ 3.624095] md0: detected capacity change from 0 to 98566144 [ 3.624699] md: md1 stopped. [ 3.624959] md0: unknown partition table [ 3.781889] md: bind<hdb2> [ 3.782406] md: bind<hda2> [ 3.802355] raid1: raid set md1 active with 2 out of 2 mirrors [ 3.802519] md1: detected capacity change from 0 to 319971524608 [ 3.803225] md: md2 stopped. [ 3.803531] md1: unknown partition table [ 3.992177] md: bind<hdd> [ 3.997028] md: bind<hdc> [ 4.016906] raid1: raid set md2 active with 2 out of 2 mirrors [ 4.017027] md2: detected capacity change from 0 to 250059227136 [ 4.017533] md2: unknown partition table [ 4.164606] device-mapper: uevent: version 1.0.3 [ 4.164968] device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@xxxxxxxxxx [ 8.279579] ohci_hcd 0000:00:0f.2: Unlink after no-IRQ? Controller is probably using the wrong IRQ. [ 8.675548] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 8.676738] SGI XFS Quota Management subsystem [ 8.768197] XFS mounting filesystem dm-26 [ 8.931046] Starting XFS recovery on filesystem: dm-26 (logdev: internal) [ 9.096115] Ending XFS recovery on filesystem: dm-26 (logdev: internal)
00:00.0 Host bridge: Broadcom CNB20LE Host Bridge (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Kernel modules: sworks-agp 00:00.1 Host bridge: Broadcom CNB20LE Host Bridge (rev 05) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 48, Cache Line Size: 32 bytes Kernel modules: sworks-agp 00:02.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) Subsystem: Intel Corporation EtherExpress PRO/100+ Server Adapter (PILA8470B) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 20 Region 0: Memory at fe000000 (32-bit, non-prefetchable) [size=4K] Region 1: I/O ports at d800 [size=64] Region 2: Memory at fd800000 (32-bit, non-prefetchable) [size=1M] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=2 PME- Kernel driver in use: e100 Kernel modules: e100, eepro100 00:05.0 PCI bridge: Pericom Semiconductor Device e111 (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 32 bytes Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Memory behind bridge: fc800000-fd7fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: [80] PCI-X bridge device Secondary Status: 64bit- 133MHz- SCD- USC- SCO- SRD- Freq=conv Status: Dev=ff:1f.0 64bit- 133MHz- SCD- USC- SCO- SRD- Upstream: Capacity=16 CommitmentLimit=16 Downstream: Capacity=16 CommitmentLimit=16 Capabilities: [a8] Subsystem: Gammagraphx, Inc. Device 0000 Capabilities: [b0] Express (v1) PCI/PCI-X Bridge, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- BrConfRtry- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr+ UnsuppReq- AuxPwr+ TransPend+ LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <1us ClockPM- Suprise- LLActRep+ BwNot- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt- Capabilities: [d8] Vital Product Data <?> Capabilities: [f0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Kernel modules: shpchp 00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 802b Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (2000ns min), Cache Line Size: 32 bytes Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Region 1: I/O ports at b800 [size=256] Region 2: Memory at fa800000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at febe0000 [disabled] [size=128K] Capabilities: [5c] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 50) Subsystem: Broadcom OSB4 South Bridge Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: piix4_smbus Kernel modules: i2c-piix4 00:0f.1 IDE interface: Broadcom OSB4 IDE Controller (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1] Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1] Region 4: I/O ports at b400 [size=16] Kernel driver in use: Serverworks_IDE Kernel modules: serverworks 00:0f.2 USB Controller: Broadcom OSB4/CSB5 OHCI USB Controller (rev 04) (prog-if 10 [OHCI]) Subsystem: Broadcom OSB4/CSB5 OHCI USB Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 (20000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 30 Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci_hcd Kernel modules: ohci-hcd 01:00.0 Mass storage controller: Silicon Image, Inc. Sil 3531 [SATALink/SATARaid] Serial ATA Controller (rev 01) Subsystem: Silicon Image, Inc. Sil 3531 [SATALink/SATARaid] Serial ATA Controller Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at fd000000 (64-bit, non-prefetchable) [size=128] Region 2: Memory at fc800000 (64-bit, non-prefetchable) [size=8K] Region 4: I/O ports at c800 [size=128] Capabilities: [54] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=1 PME- Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable- Address: 0000000000000000 Data: 0000 Capabilities: [70] Express (v1) Legacy Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 unlimited, L1 unlimited ClockPM- Suprise- LLActRep- BwNot- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- Kernel modules: sata_sil24 02:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 24 Region 0: I/O ports at b000 [size=256] Region 1: Memory at f9800000 (64-bit, non-prefetchable) [size=1K] Region 3: Memory at f9000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sym53c8xx Kernel modules: sym53c8xx 02:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53C896/897 (rev 07) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 32 bytes Interrupt: pin B routed to IRQ 25 Region 0: I/O ports at a800 [size=256] Region 1: Memory at f8800000 (64-bit, non-prefetchable) [size=1K] Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel driver in use: sym53c8xx Kernel modules: sym53c8xx
Attachment:
signature.asc
Description: Digital signature