Re: ICH10 not working with AHCI kernel option

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 04/08/2010 10:00 PM, Dâniel Fraga wrote:
On Thu, 08 Apr 2010 17:54:14 -0600
Robert Hancock<hancockrwd@xxxxxxxxx>  wrote:

Depends on a lot of things, and what you mean by "significant". You
don't get NCQ in legacy mode, and you also don't get 64-bit DMA support,
which gets more significant the more RAM you have.

	I understand Robert. Ok, by significant I mean "better" and
"faster".

	So there's no NCQ in legacy mode? But you wrote that
regarding just the ICH chipset or all chipsets? Because I remember when
I used the forcedeth driver there was NCQ.

This has a reasonably comprehensive list:
http://ata.wiki.kernel.org/index.php/SATA_hardware_features

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux