> Most likely the IDE drive isn't being detected properly, but we need > more info on the hardware. Can you post the dmesg output from bootup > with a working kernel? (If you can, the boot messages from the ones that > fail to boot would be ideal. For the Fedora one, you can edit the kernel > command line in grub and take the "quiet" off the end to see more of > them on the screen, any ata output would be useful..) Ok, here goes with a working ubuntu system. Getting logs from failed to boot systems is a challenge; none of the Fedora logs had anything obvious to me at the tail but I couldn't review them all. Systems are production so I couldn't keep offline after weekend. This is from literally the same exact installation process except to a different drive. The ide hard drive works just fine after booting from sata. Hopefully boot messages can help. Any ideas why Ubuntu didn't even bring up grub when pressing keys? I am not so familiar with it, but guessing boot loader wedged before kernel bootstrap. - Mike Mar 23 10:44:19 opt2 kernel: imklog 4.2.0, log source = /var/run/rsyslog/kmsg started. Mar 23 10:44:19 opt2 rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="646" x-info="http://www.rsyslog.com";] (re)start Mar 23 10:44:19 opt2 rsyslogd: rsyslogd's groupid changed to 103 Mar 23 10:44:20 opt2 rsyslogd: rsyslogd's userid changed to 101 Mar 23 10:44:19 opt2 rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] Mar 23 10:44:20 opt2 kernel: [ 0.000000] Initializing cgroup subsys cpuset Mar 23 10:44:20 opt2 kernel: [ 0.000000] Initializing cgroup subsys cpu Mar 23 10:44:20 opt2 kernel: [ 0.000000] Linux version 2.6.31-14-server (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 15:07:34 UTC 2009 (Ubuntu 2.6.31-14.48-server) Mar 23 10:44:20 opt2 kernel: [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-server root=UUID=17f0eb6b-217b-440e-8289-6162ed85da7f ro quiet splash Mar 23 10:44:20 opt2 kernel: [ 0.000000] KERNEL supported cpus: Mar 23 10:44:20 opt2 kernel: [ 0.000000] Intel GenuineIntel Mar 23 10:44:20 opt2 kernel: [ 0.000000] AMD AuthenticAMD Mar 23 10:44:20 opt2 kernel: [ 0.000000] Centaur CentaurHauls Mar 23 10:44:20 opt2 kernel: [ 0.000000] BIOS-provided physical RAM map: Mar 23 10:44:20 opt2 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) Mar 23 10:44:20 opt2 kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) Mar 23 10:44:20 opt2 kernel: [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) Mar 23 10:44:20 opt2 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable) Mar 23 10:44:20 opt2 kernel: [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007ffff000 (ACPI data) Mar 23 10:44:20 opt2 kernel: [ 0.000000] BIOS-e820: 000000007ffff000 - 0000000080000000 (ACPI NVS) Mar 23 10:44:20 opt2 kernel: [ 0.000000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMI 2.3 present. Mar 23 10:44:20 opt2 kernel: [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. Mar 23 10:44:20 opt2 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) Mar 23 10:44:20 opt2 kernel: [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x400000000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] MTRR default type: uncachable Mar 23 10:44:20 opt2 kernel: [ 0.000000] MTRR fixed ranges enabled: Mar 23 10:44:20 opt2 kernel: [ 0.000000] 00000-9FFFF write-back Mar 23 10:44:20 opt2 kernel: [ 0.000000] A0000-EFFFF uncachable Mar 23 10:44:20 opt2 kernel: [ 0.000000] F0000-FFFFF write-protect Mar 23 10:44:20 opt2 kernel: [ 0.000000] MTRR variable ranges enabled: Mar 23 10:44:20 opt2 kernel: [ 0.000000] 0 base 0000000000 mask FF80000000 write-back Mar 23 10:44:20 opt2 kernel: [ 0.000000] 1 disabled Mar 23 10:44:20 opt2 kernel: [ 0.000000] 2 disabled Mar 23 10:44:20 opt2 kernel: [ 0.000000] 3 disabled Mar 23 10:44:20 opt2 kernel: [ 0.000000] 4 disabled Mar 23 10:44:20 opt2 kernel: [ 0.000000] 5 disabled Mar 23 10:44:20 opt2 kernel: [ 0.000000] 6 disabled Mar 23 10:44:20 opt2 kernel: [ 0.000000] 7 disabled Mar 23 10:44:20 opt2 kernel: [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Scanning 0 areas for low memory corruption Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified physical RAM map: Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable) Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved) Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved) Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified: 0000000000100000 - 000000007fff0000 (usable) Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified: 000000007fff0000 - 000000007ffff000 (ACPI data) Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified: 000000007ffff000 - 0000000080000000 (ACPI NVS) Mar 23 10:44:20 opt2 kernel: [ 0.000000] modified: 00000000ff7c0000 - 0000000100000000 (reserved) Mar 23 10:44:20 opt2 kernel: [ 0.000000] initial memory mapped : 0 - 20000000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] init_memory_mapping: 0000000000000000-000000007fff0000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Using x86 segment limits to approximate NX protection Mar 23 10:44:20 opt2 kernel: [ 0.000000] 0000000000 - 007fe00000 page 2M Mar 23 10:44:20 opt2 kernel: [ 0.000000] 007fe00000 - 007fff0000 page 4k Mar 23 10:44:20 opt2 kernel: [ 0.000000] kernel direct mapping tables up to 7fff0000 @ 10000-14000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] RAMDISK: 37957000 - 37fefbb8 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: RSDP 00000000000f4620 00014 (v00 ACPIAM) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: RSDT 000000007fff0000 00034 (v01 A M I OEMRSDT 10000304 MSFT 00000097) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: FACP 000000007fff0200 00081 (v02 A M I OEMFACP 10000304 MSFT 00000097) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: DSDT 000000007fff0400 03086 (v01 0AAAA 0AAAA000 00000000 INTL 02002026) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: FACS 000000007ffff000 00040 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: APIC 000000007fff0380 00074 (v01 A M I OEMAPIC 10000304 MSFT 00000097) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: OEMB 000000007ffff040 0005E (v01 A M I OEMBIOS 10000304 MSFT 00000097) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: ASF! 000000007fff3490 00086 (v16 AMIASF AMDSTRET 00000001 INTL 02002026) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Scanning NUMA topology in Northbridge 24 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Number of nodes 2 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Node 0 MemBase 0000000000000000 Limit 0000000040000000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Node 1 MemBase 0000000040000000 Limit 000000007fff0000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] NUMA: Using 30 for the hash shift. Mar 23 10:44:20 opt2 kernel: [ 0.000000] Using node hash shift of 30 Mar 23 10:44:20 opt2 kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Bootmem setup node 0 0000000000000000-0000000040000000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] NODE_DATA [0000000000012000 - 0000000000016fff] Mar 23 10:44:20 opt2 kernel: [ 0.000000] bootmap [0000000000017000 - 000000000001efff] pages 8 Mar 23 10:44:20 opt2 kernel: [ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 0040000000] Mar 23 10:44:20 opt2 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Mar 23 10:44:20 opt2 kernel: [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] Mar 23 10:44:20 opt2 kernel: [ 0.000000] #2 [0001000000 - 00019e0ccc] TEXT DATA BSS ==> [0001000000 - 00019e0ccc] Mar 23 10:44:20 opt2 kernel: [ 0.000000] #3 [0037957000 - 0037fefbb8] RAMDISK ==> [0037957000 - 0037fefbb8] Mar 23 10:44:20 opt2 kernel: [ 0.000000] #4 [000009d400 - 0000100000] BIOS reserved ==> [000009d400 - 0000100000] Mar 23 10:44:20 opt2 kernel: [ 0.000000] #5 [00019e1000 - 00019e1280] BRK ==> [00019e1000 - 00019e1280] Mar 23 10:44:20 opt2 kernel: [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] Mar 23 10:44:20 opt2 kernel: [ 0.000000] Bootmem setup node 1 0000000040000000-000000007fff0000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] NODE_DATA [0000000040000000 - 0000000040004fff] Mar 23 10:44:20 opt2 kernel: [ 0.000000] bootmap [0000000040005000 - 000000004000cfff] pages 8 Mar 23 10:44:20 opt2 kernel: [ 0.000000] (7 early reservations) ==> bootmem [0040000000 - 007fff0000] Mar 23 10:44:20 opt2 kernel: [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page Mar 23 10:44:20 opt2 kernel: [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE Mar 23 10:44:20 opt2 kernel: [ 0.000000] #2 [0001000000 - 00019e0ccc] TEXT DATA BSS Mar 23 10:44:20 opt2 kernel: [ 0.000000] #3 [0037957000 - 0037fefbb8] RAMDISK Mar 23 10:44:20 opt2 kernel: [ 0.000000] #4 [000009d400 - 0000100000] BIOS reserved Mar 23 10:44:20 opt2 kernel: [ 0.000000] #5 [00019e1000 - 00019e1280] BRK Mar 23 10:44:20 opt2 kernel: [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE Mar 23 10:44:20 opt2 kernel: [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 Mar 23 10:44:20 opt2 kernel: [ 0.000000] [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff880001e00000-ffff880002bfffff] on node 0 Mar 23 10:44:20 opt2 kernel: [ 0.000000] [ffffea0000e00000-ffffea0001bfffff] PMD -> [ffff880040200000-ffff880040ffffff] on node 1 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Zone PFN ranges: Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA 0x00000010 -> 0x00001000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA32 0x00001000 -> 0x00100000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Normal 0x00100000 -> 0x00100000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Movable zone start PFN for each node Mar 23 10:44:20 opt2 kernel: [ 0.000000] early_node_map[3] active PFN ranges Mar 23 10:44:20 opt2 kernel: [ 0.000000] 0: 0x00000010 -> 0x0000009f Mar 23 10:44:20 opt2 kernel: [ 0.000000] 0: 0x00000100 -> 0x00040000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] 1: 0x00040000 -> 0x0007fff0 Mar 23 10:44:20 opt2 kernel: [ 0.000000] On node 0 totalpages: 262031 Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA zone: 56 pages used for memmap Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA zone: 103 pages reserved Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA zone: 3824 pages, LIFO batch:0 Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA32 zone: 3528 pages used for memmap Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA32 zone: 254520 pages, LIFO batch:31 Mar 23 10:44:20 opt2 kernel: [ 0.000000] On node 1 totalpages: 262128 Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA32 zone: 3584 pages used for memmap Mar 23 10:44:20 opt2 kernel: [ 0.000000] DMA32 zone: 258544 pages, LIFO batch:31 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x5008 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) Mar 23 10:44:20 opt2 kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfebff000] gsi_base[24]) Mar 23 10:44:20 opt2 kernel: [ 0.000000] IOAPIC[1]: apic_id 3, version 17, address 0xfebff000, GSI 24-27 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfebfe000] gsi_base[28]) Mar 23 10:44:20 opt2 kernel: [ 0.000000] IOAPIC[2]: apic_id 4, version 17, address 0xfebfe000, GSI 28-31 Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: IRQ0 used by override. Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: IRQ2 used by override. Mar 23 10:44:20 opt2 kernel: [ 0.000000] ACPI: IRQ9 used by override. Mar 23 10:44:20 opt2 kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information Mar 23 10:44:20 opt2 kernel: [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs Mar 23 10:44:20 opt2 kernel: [ 0.000000] nr_irqs_gsi: 32 Mar 23 10:44:20 opt2 kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7f7c0000) Mar 23 10:44:20 opt2 kernel: [ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:2 Mar 23 10:44:20 opt2 kernel: [ 0.000000] PERCPU: Remapped at ffffc90000000000 with large pages, static data 90720 bytes Mar 23 10:44:20 opt2 kernel: [ 0.000000] Built 2 zonelists in Node order, mobility grouping on. Total pages: 516888 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Policy zone: DMA32 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-server root=UUID=17f0eb6b-217b-440e-8289-6162ed85da7f ro quiet splash Mar 23 10:44:20 opt2 kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) Mar 23 10:44:20 opt2 kernel: [ 0.000000] Initializing CPU#0 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Checking aperture... Mar 23 10:44:20 opt2 kernel: [ 0.000000] No AGP bridge found Mar 23 10:44:20 opt2 kernel: [ 0.000000] Node 0: aperture @ 7b5e000000 size 32 MB Mar 23 10:44:20 opt2 kernel: [ 0.000000] Aperture beyond 4GB. Ignoring. Mar 23 10:44:20 opt2 kernel: [ 0.000000] Memory: 2050640k/2097088k available (5303k kernel code, 452k absent, 45996k reserved, 3013k data, 660k init) Mar 23 10:44:20 opt2 kernel: [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=2 Mar 23 10:44:20 opt2 kernel: [ 0.000000] NR_IRQS:4352 nr_irqs:512 Mar 23 10:44:20 opt2 kernel: [ 0.000000] Fast TSC calibration using PIT Mar 23 10:44:20 opt2 kernel: [ 0.000000] Detected 1394.256 MHz processor. Mar 23 10:44:20 opt2 kernel: [ 0.000016] spurious 8259A interrupt: IRQ7. Mar 23 10:44:20 opt2 kernel: [ 0.003059] Console: colour VGA+ 80x25 Mar 23 10:44:20 opt2 kernel: [ 0.003063] console [tty0] enabled Mar 23 10:44:20 opt2 kernel: [ 0.010000] allocated 20971520 bytes of page_cgroup Mar 23 10:44:20 opt2 kernel: [ 0.010000] please try 'cgroup_disable=memory' option if you don't want memory cgroups Mar 23 10:44:20 opt2 kernel: [ 0.010011] Calibrating delay loop (skipped), value calculated using timer frequency.. 2788.51 BogoMIPS (lpj=13942560) Mar 23 10:44:20 opt2 kernel: [ 0.010065] Security Framework initialized Mar 23 10:44:20 opt2 kernel: [ 0.010104] AppArmor: AppArmor initialized Mar 23 10:44:20 opt2 kernel: [ 0.010416] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) Mar 23 10:44:20 opt2 kernel: [ 0.013040] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) Mar 23 10:44:20 opt2 kernel: [ 0.014084] Mount-cache hash table entries: 256 Mar 23 10:44:20 opt2 kernel: [ 0.014326] Initializing cgroup subsys ns Mar 23 10:44:20 opt2 kernel: [ 0.014332] Initializing cgroup subsys cpuacct Mar 23 10:44:20 opt2 kernel: [ 0.014339] Initializing cgroup subsys memory Mar 23 10:44:20 opt2 kernel: [ 0.014357] Initializing cgroup subsys freezer Mar 23 10:44:20 opt2 kernel: [ 0.014360] Initializing cgroup subsys net_cls Mar 23 10:44:20 opt2 kernel: [ 0.014388] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Mar 23 10:44:20 opt2 kernel: [ 0.014392] CPU: L2 Cache: 1024K (64 bytes/line) Mar 23 10:44:20 opt2 kernel: [ 0.014397] CPU 0/0x0 -> Node 0 Mar 23 10:44:20 opt2 kernel: [ 0.014400] tseg: 0000000000 Mar 23 10:44:20 opt2 kernel: [ 0.014427] mce: CPU supports 5 MCE banks Mar 23 10:44:20 opt2 kernel: [ 0.014444] Performance Counters: AMD PMU driver. Mar 23 10:44:20 opt2 kernel: [ 0.014451] ... version: 0 Mar 23 10:44:20 opt2 kernel: [ 0.014453] ... bit width: 48 Mar 23 10:44:20 opt2 kernel: [ 0.014456] ... generic counters: 4 Mar 23 10:44:20 opt2 kernel: [ 0.014458] ... value mask: 0000ffffffffffff Mar 23 10:44:20 opt2 kernel: [ 0.014461] ... max period: 00007fffffffffff Mar 23 10:44:20 opt2 kernel: [ 0.014463] ... fixed-purpose counters: 0 Mar 23 10:44:20 opt2 kernel: [ 0.014466] ... counter mask: 000000000000000f Mar 23 10:44:20 opt2 kernel: [ 0.017015] ACPI: Core revision 20090521 Mar 23 10:44:20 opt2 kernel: [ 0.025477] Setting APIC routing to flat Mar 23 10:44:20 opt2 kernel: [ 0.025812] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 Mar 23 10:44:20 opt2 kernel: [ 0.126106] CPU0: AMD Opteron(tm) Processor 240 stepping 01 Mar 23 10:44:20 opt2 kernel: [ 0.130000] Booting processor 1 APIC 0x1 ip 0x6000 Mar 23 10:44:20 opt2 kernel: [ 0.010000] Initializing CPU#1 Mar 23 10:44:20 opt2 kernel: [ 0.010000] Calibrating delay using timer specific routine.. 2788.28 BogoMIPS (lpj=13941417) Mar 23 10:44:20 opt2 kernel: [ 0.010000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) Mar 23 10:44:20 opt2 kernel: [ 0.010000] CPU: L2 Cache: 1024K (64 bytes/line) Mar 23 10:44:20 opt2 kernel: [ 0.010000] CPU 1/0x1 -> Node 1 Mar 23 10:44:20 opt2 kernel: [ 0.010000] mce: CPU supports 5 MCE banks Mar 23 10:44:20 opt2 kernel: [ 0.010000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 Mar 23 10:44:20 opt2 kernel: [ 0.280837] CPU1: AMD Opteron(tm) Processor 240 stepping 01 Mar 23 10:44:20 opt2 kernel: [ 0.280857] Brought up 2 CPUs Mar 23 10:44:20 opt2 kernel: [ 0.280860] Total of 2 processors activated (5576.79 BogoMIPS). Mar 23 10:44:20 opt2 kernel: [ 0.280943] CPU0 attaching sched-domain: Mar 23 10:44:20 opt2 kernel: [ 0.280948] domain 0: span 0-1 level NODE Mar 23 10:44:20 opt2 kernel: [ 0.280952] groups: 0 1 Mar 23 10:44:20 opt2 kernel: [ 0.280961] CPU1 attaching sched-domain: Mar 23 10:44:20 opt2 kernel: [ 0.280964] domain 0: span 0-1 level NODE Mar 23 10:44:20 opt2 kernel: [ 0.280967] groups: 1 0 Mar 23 10:44:20 opt2 kernel: [ 0.281079] Booting paravirtualized kernel on bare hardware Mar 23 10:44:20 opt2 kernel: [ 0.281079] regulator: core version 0.5 Mar 23 10:44:20 opt2 kernel: [ 0.281079] Time: 16:43:59 Date: 03/23/10 Mar 23 10:44:20 opt2 kernel: [ 0.281079] NET: Registered protocol family 16 Mar 23 10:44:20 opt2 kernel: [ 0.281079] node 0 link 0: io port [0, ffffff] Mar 23 10:44:20 opt2 kernel: [ 0.281079] TOM: 0000000080000000 aka 2048M Mar 23 10:44:20 opt2 kernel: [ 0.281079] node 0 link 0: mmio [a0000, bffff] Mar 23 10:44:20 opt2 kernel: [ 0.281079] node 0 link 0: mmio [80000000, ffffffff] Mar 23 10:44:20 opt2 kernel: [ 0.281079] bus: [00,ff] on node 0 link 0 Mar 23 10:44:20 opt2 kernel: [ 0.281079] bus: 00 index 0 io port: [0, ffff] Mar 23 10:44:20 opt2 kernel: [ 0.281079] bus: 00 index 1 mmio: [a0000, bffff] Mar 23 10:44:20 opt2 kernel: [ 0.281079] bus: 00 index 2 mmio: [80000000, fcffffffff] Mar 23 10:44:20 opt2 kernel: [ 0.281079] ACPI: bus type pci registered Mar 23 10:44:20 opt2 kernel: [ 0.281079] PCI: Using configuration type 1 for base access Mar 23 10:44:20 opt2 kernel: [ 0.281810] bio: create slab <bio-0> at 0 Mar 23 10:44:20 opt2 kernel: [ 0.281810] ACPI: EC: Look up EC in DSDT Mar 23 10:44:20 opt2 kernel: [ 0.299084] ACPI: Interpreter enabled Mar 23 10:44:20 opt2 kernel: [ 0.299089] ACPI: (supports S0 S1 S4 S5) Mar 23 10:44:20 opt2 kernel: [ 0.299121] ACPI: Using IOAPIC for interrupt routing Mar 23 10:44:20 opt2 kernel: [ 0.308529] ACPI: No dock devices found. Mar 23 10:44:20 opt2 kernel: [ 0.308699] ACPI: PCI Root Bridge [PCI0] (0000:00) Mar 23 10:44:20 opt2 kernel: [ 0.308903] pci 0000:00:07.1: reg 20 io port: [0xffa0-0xffaf] Mar 23 10:44:20 opt2 kernel: [ 0.308938] pci 0000:00:07.2: reg 10 io port: [0xcc00-0xcc1f] Mar 23 10:44:20 opt2 kernel: [ 0.309094] pci 0000:00:0a.1: reg 10 64bit mmio: [0xfebff000-0xfebfffff] Mar 23 10:44:20 opt2 kernel: [ 0.309169] pci 0000:00:0b.1: reg 10 64bit mmio: [0xfebfe000-0xfebfefff] Mar 23 10:44:20 opt2 kernel: [ 0.309393] pci 0000:03:00.0: reg 10 32bit mmio: [0xfeafc000-0xfeafcfff] Mar 23 10:44:20 opt2 kernel: [ 0.309453] pci 0000:03:00.1: reg 10 32bit mmio: [0xfeafd000-0xfeafdfff] Mar 23 10:44:20 opt2 kernel: [ 0.309538] pci 0000:03:05.0: reg 10 io port: [0xac00-0xac07] Mar 23 10:44:20 opt2 kernel: [ 0.309546] pci 0000:03:05.0: reg 14 io port: [0xa480-0xa483] Mar 23 10:44:20 opt2 kernel: [ 0.309555] pci 0000:03:05.0: reg 18 io port: [0xa400-0xa407] Mar 23 10:44:20 opt2 kernel: [ 0.309564] pci 0000:03:05.0: reg 1c io port: [0xa080-0xa083] Mar 23 10:44:20 opt2 kernel: [ 0.309573] pci 0000:03:05.0: reg 20 io port: [0xa000-0xa00f] Mar 23 10:44:20 opt2 kernel: [ 0.309582] pci 0000:03:05.0: reg 24 32bit mmio: [0xfeafec00-0xfeafefff] Mar 23 10:44:20 opt2 kernel: [ 0.309591] pci 0000:03:05.0: reg 30 32bit mmio: [0xfea00000-0xfea7ffff] Mar 23 10:44:20 opt2 kernel: [ 0.309613] pci 0000:03:05.0: supports D1 D2 Mar 23 10:44:20 opt2 kernel: [ 0.309654] pci 0000:03:06.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff] Mar 23 10:44:20 opt2 kernel: [ 0.309664] pci 0000:03:06.0: reg 14 io port: [0xa800-0xa8ff] Mar 23 10:44:20 opt2 kernel: [ 0.309673] pci 0000:03:06.0: reg 18 32bit mmio: [0xfeaff000-0xfeafffff] Mar 23 10:44:20 opt2 kernel: [ 0.309699] pci 0000:03:06.0: reg 30 32bit mmio: [0xfeac0000-0xfeadffff] Mar 23 10:44:20 opt2 kernel: [ 0.309722] pci 0000:03:06.0: supports D1 D2 Mar 23 10:44:20 opt2 kernel: [ 0.309762] pci 0000:03:08.0: reg 10 32bit mmio: [0xfeafb000-0xfeafbfff] Mar 23 10:44:20 opt2 kernel: [ 0.309771] pci 0000:03:08.0: reg 14 io port: [0x9c00-0x9c3f] Mar 23 10:44:20 opt2 kernel: [ 0.309780] pci 0000:03:08.0: reg 18 32bit mmio: [0xfea80000-0xfea9ffff] Mar 23 10:44:20 opt2 kernel: [ 0.309821] pci 0000:03:08.0: supports D1 D2 Mar 23 10:44:20 opt2 kernel: [ 0.309824] pci 0000:03:08.0: PME# supported from D0 D1 D2 D3hot D3cold Mar 23 10:44:20 opt2 kernel: [ 0.309831] pci 0000:03:08.0: PME# disabled Mar 23 10:44:20 opt2 kernel: [ 0.309874] pci 0000:00:06.0: bridge io port: [0x9000-0xafff] Mar 23 10:44:20 opt2 kernel: [ 0.309880] pci 0000:00:06.0: bridge 32bit mmio: [0xfc900000-0xfeafffff] Mar 23 10:44:20 opt2 kernel: [ 0.309886] pci 0000:00:06.0: bridge 32bit mmio pref: [0xff500000-0xff5fffff] Mar 23 10:44:20 opt2 kernel: [ 0.309915] pci 0000:02:02.0: reg 10 io port: [0x8c00-0x8c7f] Mar 23 10:44:20 opt2 kernel: [ 0.309924] pci 0000:02:02.0: reg 18 io port: [0x8800-0x88ff] Mar 23 10:44:20 opt2 kernel: [ 0.309930] pci 0000:02:02.0: reg 1c 32bit mmio: [0xfc8ff000-0xfc8fffff] Mar 23 10:44:20 opt2 kernel: [ 0.309937] pci 0000:02:02.0: reg 20 32bit mmio: [0xfc8c0000-0xfc8dffff] Mar 23 10:44:20 opt2 kernel: [ 0.309946] pci 0000:02:02.0: reg 30 32bit mmio: [0xfc8f0000-0xfc8f7fff] Mar 23 10:44:20 opt2 kernel: [ 0.309959] pci 0000:02:02.0: supports D1 Mar 23 10:44:20 opt2 kernel: [ 0.310011] pci 0000:02:09.0: reg 10 64bit mmio: [0xfc890000-0xfc89ffff] Mar 23 10:44:20 opt2 kernel: [ 0.310021] pci 0000:02:09.0: reg 18 64bit mmio: [0xfc880000-0xfc88ffff] Mar 23 10:44:20 opt2 kernel: [ 0.310033] pci 0000:02:09.0: reg 30 32bit mmio: [0xfc870000-0xfc87ffff] Mar 23 10:44:20 opt2 kernel: [ 0.310052] pci 0000:02:09.0: PME# supported from D3hot D3cold Mar 23 10:44:20 opt2 kernel: [ 0.310057] pci 0000:02:09.0: PME# disabled Mar 23 10:44:20 opt2 kernel: [ 0.310094] pci 0000:02:09.1: reg 10 64bit mmio: [0xfc8e0000-0xfc8effff] Mar 23 10:44:20 opt2 kernel: [ 0.310104] pci 0000:02:09.1: reg 18 64bit mmio: [0xfc8b0000-0xfc8bffff] Mar 23 10:44:20 opt2 kernel: [ 0.310116] pci 0000:02:09.1: reg 30 32bit mmio: [0xfc8a0000-0xfc8affff] Mar 23 10:44:20 opt2 kernel: [ 0.310135] pci 0000:02:09.1: PME# supported from D3hot D3cold Mar 23 10:44:20 opt2 kernel: [ 0.310140] pci 0000:02:09.1: PME# disabled Mar 23 10:44:20 opt2 kernel: [ 0.310172] pci 0000:00:0a.0: bridge io port: [0x8000-0x8fff] Mar 23 10:44:20 opt2 kernel: [ 0.310177] pci 0000:00:0a.0: bridge 32bit mmio: [0xfc700000-0xfc8fffff] Mar 23 10:44:20 opt2 kernel: [ 0.310183] pci 0000:00:0a.0: bridge 64bit mmio pref: [0xff400000-0xff4fffff] Mar 23 10:44:20 opt2 kernel: [ 0.310212] pci 0000:01:03.0: reg 10 io port: [0x7c00-0x7c7f] Mar 23 10:44:20 opt2 kernel: [ 0.310221] pci 0000:01:03.0: reg 18 io port: [0x7800-0x78ff] Mar 23 10:44:20 opt2 kernel: [ 0.310227] pci 0000:01:03.0: reg 1c 32bit mmio: [0xfc6ff000-0xfc6fffff] Mar 23 10:44:20 opt2 kernel: [ 0.310234] pci 0000:01:03.0: reg 20 32bit mmio: [0xfc6c0000-0xfc6dffff] Mar 23 10:44:20 opt2 kernel: [ 0.310243] pci 0000:01:03.0: reg 30 32bit mmio: [0xfc6f0000-0xfc6f7fff] Mar 23 10:44:20 opt2 kernel: [ 0.310256] pci 0000:01:03.0: supports D1 Mar 23 10:44:20 opt2 kernel: [ 0.310286] pci 0000:00:0b.0: bridge io port: [0x7000-0x7fff] Mar 23 10:44:20 opt2 kernel: [ 0.310291] pci 0000:00:0b.0: bridge 32bit mmio: [0xfc600000-0xfc6fffff] Mar 23 10:44:20 opt2 kernel: [ 0.310297] pci 0000:00:0b.0: bridge 64bit mmio pref: [0xff300000-0xff3fffff] Mar 23 10:44:20 opt2 kernel: [ 0.310315] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] Mar 23 10:44:20 opt2 kernel: [ 0.310396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] Mar 23 10:44:20 opt2 kernel: [ 0.310515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLA._PRT] Mar 23 10:44:20 opt2 kernel: [ 0.310655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.GOLB._PRT] Mar 23 10:44:20 opt2 kernel: [ 0.313823] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) Mar 23 10:44:20 opt2 kernel: [ 0.313976] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) Mar 23 10:44:20 opt2 kernel: [ 0.314126] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) Mar 23 10:44:20 opt2 kernel: [ 0.314276] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) Mar 23 10:44:20 opt2 kernel: [ 0.314524] SCSI subsystem initialized Mar 23 10:44:20 opt2 kernel: [ 0.314562] libata version 3.00 loaded. Mar 23 10:44:20 opt2 kernel: [ 0.314562] usbcore: registered new interface driver usbfs Mar 23 10:44:20 opt2 kernel: [ 0.314562] usbcore: registered new interface driver hub Mar 23 10:44:20 opt2 kernel: [ 0.314562] usbcore: registered new device driver usb Mar 23 10:44:20 opt2 kernel: [ 0.314562] ACPI: WMI: Mapper loaded Mar 23 10:44:20 opt2 kernel: [ 0.314562] PCI: Using ACPI for IRQ routing Mar 23 10:44:20 opt2 kernel: [ 0.340012] Bluetooth: Core ver 2.15 Mar 23 10:44:20 opt2 kernel: [ 0.340040] NET: Registered protocol family 31 Mar 23 10:44:20 opt2 kernel: [ 0.340040] Bluetooth: HCI device and connection manager initialized Mar 23 10:44:20 opt2 kernel: [ 0.340040] Bluetooth: HCI socket layer initialized Mar 23 10:44:20 opt2 kernel: [ 0.340040] NetLabel: Initializing Mar 23 10:44:20 opt2 kernel: [ 0.340040] NetLabel: domain hash size = 128 Mar 23 10:44:20 opt2 kernel: [ 0.340040] NetLabel: protocols = UNLABELED CIPSOv4 Mar 23 10:44:20 opt2 kernel: [ 0.340058] NetLabel: unlabeled traffic allowed by default Mar 23 10:44:20 opt2 kernel: [ 0.370022] pnp: PnP ACPI init Mar 23 10:44:20 opt2 kernel: [ 0.370048] ACPI: bus type pnp registered Mar 23 10:44:20 opt2 kernel: [ 0.376168] pnp: PnP ACPI: found 14 devices Mar 23 10:44:20 opt2 kernel: [ 0.376171] ACPI: ACPI bus type pnp unregistered Mar 23 10:44:20 opt2 kernel: [ 0.376191] system 00:09: ioport range 0x680-0x6ff has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376195] system 00:09: ioport range 0x295-0x296 has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376200] system 00:09: ioport range 0x778-0x77f has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376204] system 00:09: ioport range 0xb78-0xb7f has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376208] system 00:09: ioport range 0xf78-0xf7f has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376217] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376222] system 00:0a: ioport range 0x5000-0x50bf has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376227] system 00:0a: ioport range 0x50e0-0x50ff has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376231] system 00:0a: ioport range 0x50c0-0x50df has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376236] system 00:0a: ioport range 0xde00-0xde7f has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376241] system 00:0a: ioport range 0xde80-0xdeff has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376250] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved Mar 23 10:44:20 opt2 kernel: [ 0.376255] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376260] system 00:0c: iomem range 0xfff80000-0xffffffff has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376268] system 00:0d: iomem range 0x0-0x9ffff could not be reserved Mar 23 10:44:20 opt2 kernel: [ 0.376273] system 00:0d: iomem range 0xc0000-0xdffff has been reserved Mar 23 10:44:20 opt2 kernel: [ 0.376278] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved Mar 23 10:44:20 opt2 kernel: [ 0.376283] system 00:0d: iomem range 0x100000-0x7fffffff could not be reserved Mar 23 10:44:20 opt2 kernel: [ 0.381046] AppArmor: AppArmor Filesystem Enabled Mar 23 10:44:20 opt2 kernel: [ 0.381100] pci 0000:00:06.0: PCI bridge, secondary bus 0000:03 Mar 23 10:44:20 opt2 kernel: [ 0.381105] pci 0000:00:06.0: IO window: 0x9000-0xafff Mar 23 10:44:20 opt2 kernel: [ 0.381112] pci 0000:00:06.0: MEM window: 0xfc900000-0xfeafffff Mar 23 10:44:20 opt2 kernel: [ 0.381119] pci 0000:00:06.0: PREFETCH window: 0xff500000-0xff5fffff Mar 23 10:44:20 opt2 kernel: [ 0.381125] pci 0000:00:0a.0: PCI bridge, secondary bus 0000:02 Mar 23 10:44:20 opt2 kernel: [ 0.381129] pci 0000:00:0a.0: IO window: 0x8000-0x8fff Mar 23 10:44:20 opt2 kernel: [ 0.381135] pci 0000:00:0a.0: MEM window: 0xfc700000-0xfc8fffff Mar 23 10:44:20 opt2 kernel: [ 0.381140] pci 0000:00:0a.0: PREFETCH window: 0x000000ff400000-0x000000ff4fffff Mar 23 10:44:20 opt2 kernel: [ 0.381146] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:01 Mar 23 10:44:20 opt2 kernel: [ 0.381150] pci 0000:00:0b.0: IO window: 0x7000-0x7fff Mar 23 10:44:20 opt2 kernel: [ 0.381155] pci 0000:00:0b.0: MEM window: 0xfc600000-0xfc6fffff Mar 23 10:44:20 opt2 kernel: [ 0.381160] pci 0000:00:0b.0: PREFETCH window: 0x000000ff300000-0x000000ff3fffff Mar 23 10:44:20 opt2 kernel: [ 0.381184] pci_bus 0000:00: resource 0 io: [0x00-0xffff] Mar 23 10:44:20 opt2 kernel: [ 0.381188] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff] Mar 23 10:44:20 opt2 kernel: [ 0.381193] pci_bus 0000:03: resource 0 io: [0x9000-0xafff] Mar 23 10:44:20 opt2 kernel: [ 0.381197] pci_bus 0000:03: resource 1 mem: [0xfc900000-0xfeafffff] Mar 23 10:44:20 opt2 kernel: [ 0.381201] pci_bus 0000:03: resource 2 pref mem [0xff500000-0xff5fffff] Mar 23 10:44:20 opt2 kernel: [ 0.381206] pci_bus 0000:02: resource 0 io: [0x8000-0x8fff] Mar 23 10:44:20 opt2 kernel: [ 0.381210] pci_bus 0000:02: resource 1 mem: [0xfc700000-0xfc8fffff] Mar 23 10:44:20 opt2 kernel: [ 0.381214] pci_bus 0000:02: resource 2 pref mem [0xff400000-0xff4fffff] Mar 23 10:44:20 opt2 kernel: [ 0.381219] pci_bus 0000:01: resource 0 io: [0x7000-0x7fff] Mar 23 10:44:20 opt2 kernel: [ 0.381223] pci_bus 0000:01: resource 1 mem: [0xfc600000-0xfc6fffff] Mar 23 10:44:20 opt2 kernel: [ 0.381227] pci_bus 0000:01: resource 2 pref mem [0xff300000-0xff3fffff] Mar 23 10:44:20 opt2 kernel: [ 0.381288] NET: Registered protocol family 2 Mar 23 10:44:20 opt2 kernel: [ 0.381520] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) Mar 23 10:44:20 opt2 kernel: [ 0.383643] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) Mar 23 10:44:20 opt2 kernel: [ 0.388501] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) Mar 23 10:44:20 opt2 kernel: [ 0.389635] TCP: Hash tables configured (established 262144 bind 65536) Mar 23 10:44:20 opt2 kernel: [ 0.389639] TCP reno registered Mar 23 10:44:20 opt2 kernel: [ 0.389795] NET: Registered protocol family 1 Mar 23 10:44:20 opt2 kernel: [ 0.389929] Trying to unpack rootfs image as initramfs... Mar 23 10:44:20 opt2 kernel: [ 0.390032] Switched to high resolution mode on CPU 0 Mar 23 10:44:20 opt2 kernel: [ 0.390783] Switched to high resolution mode on CPU 1 Mar 23 10:44:20 opt2 kernel: [ 0.658081] Freeing initrd memory: 6754k freed Mar 23 10:44:20 opt2 kernel: [ 0.667622] Scanning for low memory corruption every 60 seconds Mar 23 10:44:20 opt2 kernel: [ 0.667863] audit: initializing netlink socket (disabled) Mar 23 10:44:20 opt2 kernel: [ 0.667886] type=2000 audit(1269362639.660:1): initialized Mar 23 10:44:20 opt2 kernel: [ 0.681795] HugeTLB registered 2 MB page size, pre-allocated 0 pages Mar 23 10:44:20 opt2 kernel: [ 0.684066] VFS: Disk quotas dquot_6.5.2 Mar 23 10:44:20 opt2 kernel: [ 0.684155] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Mar 23 10:44:20 opt2 kernel: [ 0.685139] fuse init (API version 7.12) Mar 23 10:44:20 opt2 kernel: [ 0.685262] msgmni has been set to 4018 Mar 23 10:44:20 opt2 kernel: [ 0.685657] alg: No test for stdrng (krng) Mar 23 10:44:20 opt2 kernel: [ 0.685697] io scheduler noop registered Mar 23 10:44:20 opt2 kernel: [ 0.685700] io scheduler anticipatory registered Mar 23 10:44:20 opt2 kernel: [ 0.685703] io scheduler deadline registered (default) Mar 23 10:44:20 opt2 kernel: [ 0.685764] io scheduler cfq registered Mar 23 10:44:20 opt2 kernel: [ 0.685789] boot interrupts on PCI device 0x1022:0x746b already disabled Mar 23 10:44:20 opt2 kernel: [ 0.685795] pci 0000:00:0a.0: MSI quirk detected; subordinate MSI disabled Mar 23 10:44:20 opt2 kernel: [ 0.685802] disabled boot interrupts on PCI device 0x1022:0x7450 Mar 23 10:44:20 opt2 kernel: [ 0.685806] pci 0000:00:0a.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC Mar 23 10:44:20 opt2 kernel: [ 0.685813] pci 0000:00:0b.0: MSI quirk detected; subordinate MSI disabled Mar 23 10:44:20 opt2 kernel: [ 0.685818] disabled boot interrupts on PCI device 0x1022:0x7450 Mar 23 10:44:20 opt2 kernel: [ 0.685822] pci 0000:00:0b.0: AMD8131 rev 12 detected; disabling PCI-X MMRBC Mar 23 10:44:20 opt2 kernel: [ 0.740025] pci 0000:03:06.0: Boot video device Mar 23 10:44:20 opt2 kernel: [ 0.740042] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling Mar 23 10:44:20 opt2 kernel: [ 0.740403] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 Mar 23 10:44:20 opt2 kernel: [ 0.740441] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 Mar 23 10:44:20 opt2 kernel: [ 0.740622] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 Mar 23 10:44:20 opt2 kernel: [ 0.740629] ACPI: Power Button [PWRF] Mar 23 10:44:20 opt2 kernel: [ 0.740711] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 Mar 23 10:44:20 opt2 kernel: [ 0.740720] ACPI: Power Button [PWRB] Mar 23 10:44:20 opt2 kernel: [ 0.740977] ACPI: processor limited to max C-state 1 Mar 23 10:44:20 opt2 kernel: [ 0.741018] processor LNXCPU:00: registered as cooling_device0 Mar 23 10:44:20 opt2 kernel: [ 0.741024] ACPI: Processor [CPU0] (supports 8 throttling states) Mar 23 10:44:20 opt2 kernel: [ 0.741088] processor LNXCPU:01: registered as cooling_device1 Mar 23 10:44:20 opt2 kernel: [ 0.745609] hpet_acpi_add: no address or irqs in _CRS Mar 23 10:44:20 opt2 kernel: [ 0.745626] Linux agpgart interface v0.103 Mar 23 10:44:20 opt2 kernel: [ 0.745642] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled Mar 23 10:44:20 opt2 kernel: [ 0.745773] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Mar 23 10:44:20 opt2 kernel: [ 0.745883] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Mar 23 10:44:20 opt2 kernel: [ 0.746177] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A Mar 23 10:44:20 opt2 kernel: [ 0.746328] 00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A Mar 23 10:44:20 opt2 kernel: [ 0.747884] brd: module loaded Mar 23 10:44:20 opt2 kernel: [ 0.748529] loop: module loaded Mar 23 10:44:20 opt2 kernel: [ 0.748651] input: Macintosh mouse button emulation as /devices/virtual/input/input2 Mar 23 10:44:20 opt2 kernel: [ 0.748917] sata_promise 0000:02:02.0: version 2.12 Mar 23 10:44:20 opt2 kernel: [ 0.748937] alloc irq_desc for 26 on node 0 Mar 23 10:44:20 opt2 kernel: [ 0.748940] alloc kstat_irqs on node 0 Mar 23 10:44:20 opt2 kernel: [ 0.748954] sata_promise 0000:02:02.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26 Mar 23 10:44:20 opt2 kernel: [ 0.749173] scsi0 : sata_promise Mar 23 10:44:20 opt2 kernel: [ 0.749330] scsi1 : sata_promise Mar 23 10:44:20 opt2 kernel: [ 0.749421] scsi2 : sata_promise Mar 23 10:44:20 opt2 kernel: [ 0.749511] scsi3 : sata_promise Mar 23 10:44:20 opt2 kernel: [ 0.749561] ata1: SATA max UDMA/133 mmio m4096@0xfc8ff000 ata 0xfc8ff380 irq 26 Mar 23 10:44:20 opt2 kernel: [ 0.749566] ata2: SATA max UDMA/133 mmio m4096@0xfc8ff000 ata 0xfc8ff280 irq 26 Mar 23 10:44:20 opt2 kernel: [ 0.749570] ata3: SATA max UDMA/133 mmio m4096@0xfc8ff000 ata 0xfc8ff200 irq 26 Mar 23 10:44:20 opt2 kernel: [ 0.749575] ata4: SATA max UDMA/133 mmio m4096@0xfc8ff000 ata 0xfc8ff300 irq 26 Mar 23 10:44:20 opt2 kernel: [ 0.749663] alloc irq_desc for 28 on node 0 Mar 23 10:44:20 opt2 kernel: [ 0.749666] alloc kstat_irqs on node 0 Mar 23 10:44:20 opt2 kernel: [ 0.749672] sata_promise 0000:01:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28 Mar 23 10:44:20 opt2 kernel: [ 0.749851] scsi4 : sata_promise Mar 23 10:44:20 opt2 kernel: [ 0.749980] scsi5 : sata_promise Mar 23 10:44:20 opt2 kernel: [ 0.750110] scsi6 : sata_promise Mar 23 10:44:20 opt2 kernel: [ 0.750210] scsi7 : sata_promise Mar 23 10:44:20 opt2 kernel: [ 0.750257] ata5: SATA max UDMA/133 mmio m4096@0xfc6ff000 ata 0xfc6ff380 irq 28 Mar 23 10:44:20 opt2 kernel: [ 0.750261] ata6: SATA max UDMA/133 mmio m4096@0xfc6ff000 ata 0xfc6ff280 irq 28 Mar 23 10:44:20 opt2 kernel: [ 0.750266] ata7: SATA max UDMA/133 mmio m4096@0xfc6ff000 ata 0xfc6ff200 irq 28 Mar 23 10:44:20 opt2 kernel: [ 0.750270] ata8: SATA max UDMA/133 mmio m4096@0xfc6ff000 ata 0xfc6ff300 irq 28 Mar 23 10:44:20 opt2 kernel: [ 0.750497] sata_sil 0000:03:05.0: version 2.4 Mar 23 10:44:20 opt2 kernel: [ 0.750573] alloc irq_desc for 19 on node 0 Mar 23 10:44:20 opt2 kernel: [ 0.750576] alloc kstat_irqs on node 0 Mar 23 10:44:20 opt2 kernel: [ 0.750582] sata_sil 0000:03:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 Mar 23 10:44:20 opt2 kernel: [ 0.750604] sata_sil 0000:03:05.0: Applying R_ERR on DMA activate FIS errata fix Mar 23 10:44:20 opt2 kernel: [ 0.750728] scsi8 : sata_sil Mar 23 10:44:20 opt2 kernel: [ 0.750835] scsi9 : sata_sil Mar 23 10:44:20 opt2 kernel: [ 0.750933] scsi10 : sata_sil Mar 23 10:44:20 opt2 kernel: [ 0.751028] scsi11 : sata_sil Mar 23 10:44:20 opt2 kernel: [ 0.751082] ata9: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafec80 irq 19 Mar 23 10:44:20 opt2 kernel: [ 0.751087] ata10: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafecc0 irq 19 Mar 23 10:44:20 opt2 kernel: [ 0.751092] ata11: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafee80 irq 19 Mar 23 10:44:20 opt2 kernel: [ 0.751097] ata12: SATA max UDMA/100 mmio m1024@0xfeafec00 tf 0xfeafeec0 irq 19 Mar 23 10:44:20 opt2 kernel: [ 0.751615] pata_amd 0000:00:07.1: version 0.4.1 Mar 23 10:44:20 opt2 kernel: [ 0.751848] scsi12 : pata_amd Mar 23 10:44:20 opt2 kernel: [ 0.751947] scsi13 : pata_amd Mar 23 10:44:20 opt2 kernel: [ 0.753001] ata13: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 Mar 23 10:44:20 opt2 kernel: [ 0.753005] ata14: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 Mar 23 10:44:20 opt2 kernel: [ 0.754185] Fixed MDIO Bus: probed Mar 23 10:44:20 opt2 kernel: [ 0.754242] PPP generic driver version 2.4.2 Mar 23 10:44:20 opt2 kernel: [ 0.754396] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver Mar 23 10:44:20 opt2 kernel: [ 0.754423] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver Mar 23 10:44:20 opt2 kernel: [ 0.754541] ohci_hcd 0000:03:00.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Mar 23 10:44:20 opt2 kernel: [ 0.754563] ohci_hcd 0000:03:00.0: OHCI Host Controller Mar 23 10:44:20 opt2 kernel: [ 0.754651] ohci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 1 Mar 23 10:44:20 opt2 kernel: [ 0.754676] ohci_hcd 0000:03:00.0: irq 19, io mem 0xfeafc000 Mar 23 10:44:20 opt2 kernel: [ 0.812140] usb usb1: configuration #1 chosen from 1 choice Mar 23 10:44:20 opt2 kernel: [ 0.812185] hub 1-0:1.0: USB hub found Mar 23 10:44:20 opt2 kernel: [ 0.812203] hub 1-0:1.0: 3 ports detected Mar 23 10:44:20 opt2 kernel: [ 0.812349] ohci_hcd 0000:03:00.1: PCI INT D -> GSI 19 (level, low) -> IRQ 19 Mar 23 10:44:20 opt2 kernel: [ 0.812363] ohci_hcd 0000:03:00.1: OHCI Host Controller Mar 23 10:44:20 opt2 kernel: [ 0.812429] ohci_hcd 0000:03:00.1: new USB bus registered, assigned bus number 2 Mar 23 10:44:20 opt2 kernel: [ 0.812451] ohci_hcd 0000:03:00.1: irq 19, io mem 0xfeafd000 Mar 23 10:44:20 opt2 kernel: [ 0.872104] usb usb2: configuration #1 chosen from 1 choice Mar 23 10:44:20 opt2 kernel: [ 0.872146] hub 2-0:1.0: USB hub found Mar 23 10:44:20 opt2 kernel: [ 0.872159] hub 2-0:1.0: 3 ports detected Mar 23 10:44:20 opt2 kernel: [ 0.872236] uhci_hcd: USB Universal Host Controller Interface driver Mar 23 10:44:20 opt2 kernel: [ 0.872423] PNP: No PS/2 controller found. Probing ports directly. Mar 23 10:44:20 opt2 kernel: [ 0.874466] serio: i8042 KBD port at 0x60,0x64 irq 1 Mar 23 10:44:20 opt2 kernel: [ 0.874476] serio: i8042 AUX port at 0x60,0x64 irq 12 Mar 23 10:44:20 opt2 kernel: [ 0.874609] mice: PS/2 mouse device common for all mice Mar 23 10:44:20 opt2 kernel: [ 0.874748] rtc_cmos 00:02: RTC can wake from S4 Mar 23 10:44:20 opt2 kernel: [ 0.874813] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 Mar 23 10:44:20 opt2 kernel: [ 0.874847] rtc0: alarms up to one year, y3k, 114 bytes nvram Mar 23 10:44:20 opt2 kernel: [ 0.875044] device-mapper: uevent: version 1.0.3 Mar 23 10:44:20 opt2 kernel: [ 0.875205] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@xxxxxxxxxx Mar 23 10:44:20 opt2 kernel: [ 0.875353] device-mapper: multipath: version 1.1.0 loaded Mar 23 10:44:20 opt2 kernel: [ 0.875359] device-mapper: multipath round-robin: version 1.0.0 loaded Mar 23 10:44:20 opt2 kernel: [ 0.875694] cpuidle: using governor ladder Mar 23 10:44:20 opt2 kernel: [ 0.875697] cpuidle: using governor menu Mar 23 10:44:20 opt2 kernel: [ 0.876366] TCP cubic registered Mar 23 10:44:20 opt2 kernel: [ 0.876566] NET: Registered protocol family 10 Mar 23 10:44:20 opt2 kernel: [ 0.877256] lo: Disabled Privacy Extensions Mar 23 10:44:20 opt2 kernel: [ 0.877676] NET: Registered protocol family 17 Mar 23 10:44:20 opt2 kernel: [ 0.877708] Bluetooth: L2CAP ver 2.13 Mar 23 10:44:20 opt2 kernel: [ 0.877711] Bluetooth: L2CAP socket layer initialized Mar 23 10:44:20 opt2 kernel: [ 0.877716] Bluetooth: SCO (Voice Link) ver 0.6 Mar 23 10:44:20 opt2 kernel: [ 0.877718] Bluetooth: SCO socket layer initialized Mar 23 10:44:20 opt2 kernel: [ 0.877773] Bluetooth: RFCOMM TTY layer initialized Mar 23 10:44:20 opt2 kernel: [ 0.877777] Bluetooth: RFCOMM socket layer initialized Mar 23 10:44:20 opt2 kernel: [ 0.877779] Bluetooth: RFCOMM ver 1.11 Mar 23 10:44:20 opt2 kernel: [ 0.877819] powernow-k8: Power state transitions not supported Mar 23 10:44:20 opt2 kernel: [ 0.877825] powernow-k8: Power state transitions not supported Mar 23 10:44:20 opt2 kernel: [ 0.877950] PM: Resume from disk failed. Mar 23 10:44:20 opt2 kernel: [ 0.877970] registered taskstats version 1 Mar 23 10:44:20 opt2 kernel: [ 0.878212] Magic number: 2:92:743 Mar 23 10:44:20 opt2 kernel: [ 0.878339] rtc_cmos 00:02: setting system clock to 2010-03-23 16:44:00 UTC (1269362640) Mar 23 10:44:20 opt2 kernel: [ 0.878344] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found Mar 23 10:44:20 opt2 kernel: [ 0.878347] EDD information not available. Mar 23 10:44:20 opt2 kernel: [ 0.953048] ata13.00: ATA-6: Maxtor 4D040H2, DAH017K0, max UDMA/100 Mar 23 10:44:20 opt2 kernel: [ 0.953052] ata13.00: 80043264 sectors, multi 16: LBA Mar 23 10:44:20 opt2 kernel: [ 0.953097] ata13.01: ATAPI: SONY DVD RW AW-G540A, 1.30, max UDMA/33 Mar 23 10:44:20 opt2 kernel: [ 0.992986] ata13.00: configured for UDMA/100 Mar 23 10:44:20 opt2 kernel: [ 1.032763] ata13.01: configured for UDMA/33 Mar 23 10:44:20 opt2 kernel: [ 1.092536] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 1.100038] ata9: SATA link down (SStatus 0 SControl 310) Mar 23 10:44:20 opt2 kernel: [ 1.100100] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 1.153805] ata1.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 1.153810] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) Mar 23 10:44:20 opt2 kernel: [ 1.160291] ata5.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 1.160295] ata5.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) Mar 23 10:44:20 opt2 kernel: [ 1.243589] ata5.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 1.245425] ata1.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 1.245586] scsi 0:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 1.245771] sd 0:0:0:0: Attached scsi generic sg0 type 0 Mar 23 10:44:20 opt2 kernel: [ 1.245835] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 23 10:44:20 opt2 kernel: [ 1.245902] sd 0:0:0:0: [sda] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 1.245906] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 1.245941] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 1.246141] sda: sda1 sda2 Mar 23 10:44:20 opt2 kernel: [ 1.285690] sd 0:0:0:0: [sda] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 1.590036] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 1.651576] ata2.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 1.651580] ata2.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) Mar 23 10:44:20 opt2 kernel: [ 1.743201] ata2.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 1.743416] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 Mar 23 10:44:20 opt2 kernel: [ 1.743419] ata2: hotplug_status 0x22 Mar 23 10:44:20 opt2 kernel: [ 1.743427] ata2: hard resetting link Mar 23 10:44:20 opt2 kernel: [ 2.490037] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 2.634325] ata2.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 2.634330] ata2: EH complete Mar 23 10:44:20 opt2 kernel: [ 2.634399] scsi 1:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 2.634542] sd 1:0:0:0: Attached scsi generic sg1 type 0 Mar 23 10:44:20 opt2 kernel: [ 2.634590] sd 1:0:0:0: [sdb] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 23 10:44:20 opt2 kernel: [ 2.634650] sd 1:0:0:0: [sdb] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 2.634653] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 2.634684] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 2.634823] sdb: unknown partition table Mar 23 10:44:20 opt2 kernel: [ 2.674337] sd 1:0:0:0: [sdb] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 2.980037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 3.035629] ata3.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 3.035634] ata3.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) Mar 23 10:44:20 opt2 kernel: [ 3.118938] ata3.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 3.119149] ata3: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 Mar 23 10:44:20 opt2 kernel: [ 3.119152] ata3: hotplug_status 0x11 Mar 23 10:44:20 opt2 kernel: [ 3.119160] ata3: hard resetting link Mar 23 10:44:20 opt2 kernel: [ 3.860037] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 4.001773] ata3.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 4.001777] ata3: EH complete Mar 23 10:44:20 opt2 kernel: [ 4.001847] scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 4.001992] sd 2:0:0:0: Attached scsi generic sg2 type 0 Mar 23 10:44:20 opt2 kernel: [ 4.002034] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 23 10:44:20 opt2 kernel: [ 4.002093] sd 2:0:0:0: [sdc] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 4.002097] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 4.002126] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 4.002265] sdc: unknown partition table Mar 23 10:44:20 opt2 kernel: [ 4.041843] sd 2:0:0:0: [sdc] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 4.350037] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 4.406159] ata4.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 4.406164] ata4.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) Mar 23 10:44:20 opt2 kernel: [ 4.489468] ata4.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 4.489679] ata4: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 Mar 23 10:44:20 opt2 kernel: [ 4.489682] ata4: hotplug_status 0x44 Mar 23 10:44:20 opt2 kernel: [ 4.489690] ata4: hard resetting link Mar 23 10:44:20 opt2 kernel: [ 5.230038] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 5.372289] ata4.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 5.372292] ata4: EH complete Mar 23 10:44:20 opt2 kernel: [ 5.372360] scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 5.372498] sd 3:0:0:0: Attached scsi generic sg3 type 0 Mar 23 10:44:20 opt2 kernel: [ 5.372552] sd 3:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 23 10:44:20 opt2 kernel: [ 5.372608] sd 3:0:0:0: [sdd] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 5.372612] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 5.372642] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 5.372794] sdd: Mar 23 10:44:20 opt2 kernel: [ 5.372884] scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 5.373031] sd 4:0:0:0: Attached scsi generic sg4 type 0 Mar 23 10:44:20 opt2 kernel: [ 5.373071] sd 4:0:0:0: [sde] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 23 10:44:20 opt2 kernel: [ 5.373125] sd 4:0:0:0: [sde] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 5.373129] sd 4:0:0:0: [sde] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 5.373158] sd 4:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 5.373301] sde: unknown partition table Mar 23 10:44:20 opt2 kernel: [ 5.389480] sd 4:0:0:0: [sde] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 5.412128] unknown partition table Mar 23 10:44:20 opt2 kernel: [ 5.412320] sd 3:0:0:0: [sdd] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 5.720038] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 5.783506] ata6.00: ATA-7: ST3320620AS, 3.AAE, max UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 5.783511] ata6.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) Mar 23 10:44:20 opt2 kernel: [ 5.875135] ata6.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 5.875347] ata6: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 Mar 23 10:44:20 opt2 kernel: [ 5.875350] ata6: hotplug_status 0x2 Mar 23 10:44:20 opt2 kernel: [ 5.875358] ata6: hard resetting link Mar 23 10:44:20 opt2 kernel: [ 6.620039] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 6.757944] ata6.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 6.757948] ata6: EH complete Mar 23 10:44:20 opt2 kernel: [ 6.758020] scsi 5:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 6.758171] sd 5:0:0:0: Attached scsi generic sg5 type 0 Mar 23 10:44:20 opt2 kernel: [ 6.758213] sd 5:0:0:0: [sdf] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 23 10:44:20 opt2 kernel: [ 6.758271] sd 5:0:0:0: [sdf] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 6.758275] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 6.758306] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 6.758454] sdf: unknown partition table Mar 23 10:44:20 opt2 kernel: [ 6.797953] sd 5:0:0:0: [sdf] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 7.100038] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 7.152078] ata7.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 7.152083] ata7.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) Mar 23 10:44:20 opt2 kernel: [ 7.243715] ata7.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 7.243926] ata7: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 Mar 23 10:44:20 opt2 kernel: [ 7.243929] ata7: hotplug_status 0x11 Mar 23 10:44:20 opt2 kernel: [ 7.243937] ata7: hard resetting link Mar 23 10:44:20 opt2 kernel: [ 7.990037] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 8.134876] ata7.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 8.134880] ata7: EH complete Mar 23 10:44:20 opt2 kernel: [ 8.134948] scsi 6:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 8.135097] sd 6:0:0:0: Attached scsi generic sg6 type 0 Mar 23 10:44:20 opt2 kernel: [ 8.135138] sd 6:0:0:0: [sdg] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 23 10:44:20 opt2 kernel: [ 8.135195] sd 6:0:0:0: [sdg] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 8.135199] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 8.135228] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 8.135368] sdg: unknown partition table Mar 23 10:44:20 opt2 kernel: [ 8.174944] sd 6:0:0:0: [sdg] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 8.480038] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 8.545473] ata8.00: ATA-7: ST3320620AS, 3.AAJ, max UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 8.545478] ata8.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 0/32) Mar 23 10:44:20 opt2 kernel: [ 8.628773] ata8.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 8.628984] ata8: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0xf t4 Mar 23 10:44:20 opt2 kernel: [ 8.628987] ata8: hotplug_status 0x44 Mar 23 10:44:20 opt2 kernel: [ 8.628995] ata8: hard resetting link Mar 23 10:44:20 opt2 kernel: [ 9.370041] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 23 10:44:20 opt2 kernel: [ 9.503254] ata8.00: configured for UDMA/133 Mar 23 10:44:20 opt2 kernel: [ 9.503258] ata8: EH complete Mar 23 10:44:20 opt2 kernel: [ 9.503328] scsi 7:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 9.503468] sd 7:0:0:0: Attached scsi generic sg7 type 0 Mar 23 10:44:20 opt2 kernel: [ 9.503513] sd 7:0:0:0: [sdh] 625142448 512-byte logical blocks: (320 GB/298 GiB) Mar 23 10:44:20 opt2 kernel: [ 9.503571] sd 7:0:0:0: [sdh] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 9.503575] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 9.503606] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 9.503755] sdh: unknown partition table Mar 23 10:44:20 opt2 kernel: [ 9.543312] sd 7:0:0:0: [sdh] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 9.850034] ata10: SATA link down (SStatus 0 SControl 310) Mar 23 10:44:20 opt2 kernel: [ 10.200037] ata11: SATA link down (SStatus 0 SControl 310) Mar 23 10:44:20 opt2 kernel: [ 10.552533] ata12: SATA link down (SStatus 0 SControl 310) Mar 23 10:44:20 opt2 kernel: [ 10.552625] scsi 12:0:0:0: Direct-Access ATA Maxtor 4D040H2 DAH0 PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 10.552781] sd 12:0:0:0: Attached scsi generic sg8 type 0 Mar 23 10:44:20 opt2 kernel: [ 10.555645] sd 12:0:0:0: [sdi] 80043264 512-byte logical blocks: (40.9 GB/38.1 GiB) Mar 23 10:44:20 opt2 kernel: [ 10.555701] sd 12:0:0:0: [sdi] Write Protect is off Mar 23 10:44:20 opt2 kernel: [ 10.555706] sd 12:0:0:0: [sdi] Mode Sense: 00 3a 00 00 Mar 23 10:44:20 opt2 kernel: [ 10.555736] sd 12:0:0:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA Mar 23 10:44:20 opt2 kernel: [ 10.555880] sdi: Mar 23 10:44:20 opt2 kernel: [ 10.593577] scsi 12:0:1:0: CD-ROM SONY DVD RW AW-G540A 1.30 PQ: 0 ANSI: 5 Mar 23 10:44:20 opt2 kernel: [ 10.599123] sd 12:0:0:0: [sdi] Attached SCSI disk Mar 23 10:44:20 opt2 kernel: [ 10.612782] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray Mar 23 10:44:20 opt2 kernel: [ 10.612788] Uniform CD-ROM driver Revision: 3.20 Mar 23 10:44:20 opt2 kernel: [ 10.612890] sr 12:0:1:0: Attached scsi CD-ROM sr0 Mar 23 10:44:20 opt2 kernel: [ 10.612944] sr 12:0:1:0: Attached scsi generic sg9 type 5 Mar 23 10:44:20 opt2 kernel: [ 10.781278] Freeing unused kernel memory: 660k freed Mar 23 10:44:20 opt2 kernel: [ 10.781961] Write protecting the kernel read-only data: 7572k Mar 23 10:44:20 opt2 kernel: [ 11.111781] Floppy drive(s): fd0 is 1.44M Mar 23 10:44:20 opt2 kernel: [ 11.136166] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI Mar 23 10:44:20 opt2 kernel: [ 11.136172] e100: Copyright(c) 1999-2006 Intel Corporation Mar 23 10:44:20 opt2 kernel: [ 11.146285] FDC 0 is a post-1991 82077 Mar 23 10:44:20 opt2 kernel: [ 11.149223] alloc irq_desc for 18 on node 0 Mar 23 10:44:20 opt2 kernel: [ 11.149230] alloc kstat_irqs on node 0 Mar 23 10:44:20 opt2 kernel: [ 11.149255] e100 0000:03:08.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 Mar 23 10:44:20 opt2 kernel: [ 11.252187] e100 0000:03:08.0: PME# disabled Mar 23 10:44:20 opt2 kernel: [ 11.253055] e100: eth0: e100_probe: addr 0xfeafb000, irq 18, MAC addr 00:e0:81:28:67:de Mar 23 10:44:20 opt2 kernel: [ 11.253536] tg3.c:v3.99 (April 20, 2009) Mar 23 10:44:20 opt2 kernel: [ 11.253550] alloc irq_desc for 24 on node 0 Mar 23 10:44:20 opt2 kernel: [ 11.253553] alloc kstat_irqs on node 0 Mar 23 10:44:20 opt2 kernel: [ 11.253560] tg3 0000:02:09.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24 Mar 23 10:44:20 opt2 kernel: [ 11.280128] tg3 0000:02:09.0: wake-up capability disabled by ACPI Mar 23 10:44:20 opt2 kernel: [ 11.280139] tg3 0000:02:09.0: PME# disabled Mar 23 10:44:20 opt2 kernel: [ 11.311997] eth1: Tigon3 [partno(BCM95704A7) rev 2003] (PCI:66MHz:64-bit) MAC address 00:e0:81:28:67:fc Mar 23 10:44:20 opt2 kernel: [ 11.312006] eth1: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) Mar 23 10:44:20 opt2 kernel: [ 11.312011] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] Mar 23 10:44:20 opt2 kernel: [ 11.312014] eth1: dma_rwctrl[763f0000] dma_mask[64-bit] Mar 23 10:44:20 opt2 kernel: [ 11.324132] alloc irq_desc for 25 on node 0 Mar 23 10:44:20 opt2 kernel: [ 11.324140] alloc kstat_irqs on node 0 Mar 23 10:44:20 opt2 kernel: [ 11.324155] tg3 0000:02:09.1: PCI INT B -> GSI 25 (level, low) -> IRQ 25 Mar 23 10:44:20 opt2 kernel: [ 11.350065] tg3 0000:02:09.1: PME# disabled Mar 23 10:44:20 opt2 kernel: [ 11.374786] eth2: Tigon3 [partno(BCM95704A7) rev 2003] (PCI:66MHz:64-bit) MAC address 00:e0:81:28:67:fd Mar 23 10:44:20 opt2 kernel: [ 11.374793] eth2: attached PHY is 5704 (10/100/1000Base-T Ethernet) (WireSpeed[1]) Mar 23 10:44:20 opt2 kernel: [ 11.374798] eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1] Mar 23 10:44:20 opt2 kernel: [ 11.374802] eth2: dma_rwctrl[763f0000] dma_mask[64-bit] Mar 23 10:44:20 opt2 kernel: [ 11.739999] PM: Starting manual resume from disk Mar 23 10:44:20 opt2 kernel: [ 11.740008] PM: Resume from partition 8:1 Mar 23 10:44:20 opt2 kernel: [ 11.740011] PM: Checking hibernation image. Mar 23 10:44:20 opt2 kernel: [ 11.740122] PM: Resume from disk failed. Mar 23 10:44:20 opt2 kernel: [ 11.756191] EXT4-fs (sda2): INFO: recovery required on readonly filesystem Mar 23 10:44:20 opt2 kernel: [ 11.756199] EXT4-fs (sda2): write access will be enabled during recovery Mar 23 10:44:20 opt2 kernel: [ 11.760544] EXT4-fs (sda2): barriers enabled Mar 23 10:44:20 opt2 kernel: [ 16.760982] kjournald2 starting: pid 400, dev sda2:8, commit interval 5 seconds Mar 23 10:44:20 opt2 kernel: [ 16.761028] EXT4-fs (sda2): delayed allocation enabled Mar 23 10:44:20 opt2 kernel: [ 16.761034] EXT4-fs: file extents enabled Mar 23 10:44:20 opt2 kernel: [ 16.827590] EXT4-fs: mballoc enabled Mar 23 10:44:20 opt2 kernel: [ 16.827618] EXT4-fs (sda2): orphan cleanup on readonly fs Mar 23 10:44:20 opt2 kernel: [ 16.827633] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 416 Mar 23 10:44:20 opt2 kernel: [ 16.827799] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 410 Mar 23 10:44:20 opt2 kernel: [ 16.827890] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 407 Mar 23 10:44:20 opt2 kernel: [ 16.827920] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 405 Mar 23 10:44:20 opt2 kernel: [ 16.827951] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 403 Mar 23 10:44:20 opt2 kernel: [ 16.827980] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 402 Mar 23 10:44:20 opt2 kernel: [ 16.828011] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 396 Mar 23 10:44:20 opt2 kernel: [ 16.828080] EXT4-fs (sda2): ext4_orphan_cleanup: deleting unreferenced inode 393 Mar 23 10:44:20 opt2 kernel: [ 16.828109] EXT4-fs (sda2): 8 orphan inodes deleted Mar 23 10:44:20 opt2 kernel: [ 16.828114] EXT4-fs (sda2): recovery complete Mar 23 10:44:20 opt2 kernel: [ 17.569454] EXT4-fs (sda2): mounted filesystem with ordered data mode Mar 23 10:44:20 opt2 kernel: [ 18.044899] type=1505 audit(1269362657.664:2): operation="profile_load" pid=421 name=/sbin/dhclient3 Mar 23 10:44:20 opt2 kernel: [ 18.045334] type=1505 audit(1269362657.664:3): operation="profile_load" pid=421 name=/usr/lib/NetworkManager/nm-dhcp-client.action Mar 23 10:44:20 opt2 kernel: [ 18.045576] type=1505 audit(1269362657.664:4): operation="profile_load" pid=421 name=/usr/lib/connman/scripts/dhclient-script Mar 23 10:44:20 opt2 kernel: [ 18.048803] type=1505 audit(1269362657.664:5): operation="profile_load" pid=422 name=/usr/sbin/tcpdump Mar 23 10:44:20 opt2 kernel: [ 18.586156] Adding 1951856k swap on /dev/sda1. Priority:-1 extents:1 across:1951856k Mar 23 10:44:20 opt2 kernel: [ 18.881171] EXT4-fs (sda2): internal journal on sda2:8 Mar 23 10:44:20 opt2 kernel: [ 18.996738] udev: starting version 147 Mar 23 10:44:20 opt2 kernel: [ 19.971463] parport_pc 00:08: reported by Plug and Play ACPI Mar 23 10:44:20 opt2 kernel: [ 19.971526] parport0: PC-style at 0x378, irq 7 [PCSPP] Mar 23 10:44:20 opt2 kernel: [ 19.982287] shpchp 0000:00:06.0: HPC vendor_id 1022 device_id 7460 ss_vid 0 ss_did 0 Mar 23 10:44:20 opt2 kernel: [ 19.982295] shpchp 0000:00:06.0: Cannot reserve MMIO region Mar 23 10:44:20 opt2 kernel: [ 19.983057] shpchp 0000:00:0a.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 Mar 23 10:44:20 opt2 kernel: [ 19.983062] shpchp 0000:00:0a.0: Cannot reserve MMIO region Mar 23 10:44:20 opt2 kernel: [ 19.983219] shpchp 0000:00:0b.0: HPC vendor_id 1022 device_id 7450 ss_vid 0 ss_did 0 Mar 23 10:44:20 opt2 kernel: [ 19.983224] shpchp 0000:00:0b.0: Cannot reserve MMIO region Mar 23 10:44:20 opt2 kernel: [ 19.983363] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Mar 23 10:44:20 opt2 kernel: [ 20.071977] EDAC MC: Ver: 2.1.0 Oct 16 2009 Mar 23 10:44:20 opt2 kernel: [ 20.130097] lp0: using parport0 (interrupt-driven). Mar 23 10:44:20 opt2 kernel: [ 20.170112] EDAC amd64_edac: Ver: 3.2.0 Oct 16 2009 Mar 23 10:44:20 opt2 kernel: [ 20.173157] ppdev: user-space parallel port driver Mar 23 10:44:20 opt2 kernel: [ 20.190054] EDAC amd64: ECC is enabled by BIOS, Proceeding with EDAC module initialization Mar 23 10:44:20 opt2 kernel: [ 20.216667] EDAC amd64: ECC is enabled by BIOS, Proceeding with EDAC module initialization Mar 23 10:44:20 opt2 kernel: [ 20.216748] EDAC MC: Rev E or earlier detected Mar 23 10:44:20 opt2 kernel: [ 20.216870] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 Mar 23 10:44:20 opt2 kernel: [ 20.216874] EDAC MC: Rev E or earlier detected Mar 23 10:44:20 opt2 kernel: [ 20.216951] EDAC MC1: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:19.2 Mar 23 10:44:20 opt2 kernel: [ 20.216987] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) Mar 23 10:44:20 opt2 kernel: [ 20.249972] AMD768 RNG detected Mar 23 10:44:20 opt2 kernel: [ 20.365190] ACPI: I/O resource amd756_smbus [0x50e0-0x50ef] conflicts with ACPI region PMIO [0x5000-0x50fe] Mar 23 10:44:20 opt2 kernel: [ 20.365289] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Mar 23 10:44:20 opt2 kernel: [ 20.365322] amd756_smbus: probe of 0000:00:07.3 failed with error -16 Mar 23 10:44:20 opt2 kernel: [ 20.366257] ACPI: I/O resource 0000:00:07.2 [0xcc00-0xcc1f] conflicts with ACPI region ECIO [0xcc00-0xcc1f] Mar 23 10:44:20 opt2 kernel: [ 20.366353] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver Mar 23 10:44:20 opt2 kernel: [ 20.366378] amd8111_smbus2: probe of 0000:00:07.2 failed with error -16 Mar 23 10:44:20 opt2 kernel: [ 20.590402] ip_tables: (C) 2000-2006 Netfilter Core Team Mar 23 10:44:20 opt2 kernel: [ 20.608635] udev: renamed network interface eth2 to eth1 Mar 23 10:44:20 opt2 kernel: [ 20.655723] udev: renamed network interface eth1_rename to eth0 Mar 23 10:44:20 opt2 kernel: [ 20.656699] udev: renamed network interface eth0_rename to eth2 Mar 23 10:44:20 opt2 kernel: [ 20.781721] e100 0000:03:08.0: firmware: requesting e100/d102e_ucode.bin Mar 23 10:44:20 opt2 kernel: [ 21.040831] ADDRCONF(NETDEV_UP): eth2: link is not ready Mar 23 10:44:20 opt2 kernel: [ 21.080762] tg3 0000:02:09.1: firmware: requesting tigon/tg3_tso.bin Mar 23 10:44:21 opt2 kernel: [ 21.458804] type=1505 audit(1269362661.071:6): operation="profile_replace" pid=860 name=/sbin/dhclient3 Mar 23 10:44:21 opt2 kernel: [ 21.459248] type=1505 audit(1269362661.071:7): operation="profile_replace" pid=860 name=/usr/lib/NetworkManager/nm-dhcp-client.action Mar 23 10:44:21 opt2 kernel: [ 21.459501] type=1505 audit(1269362661.071:8): operation="profile_replace" pid=860 name=/usr/lib/connman/scripts/dhclient-script Mar 23 10:44:21 opt2 kernel: [ 21.461582] tg3 0000:02:09.1: PME# disabled Mar 23 10:44:21 opt2 kernel: [ 21.517438] ADDRCONF(NETDEV_UP): eth1: link is not ready Mar 23 10:44:21 opt2 kernel: [ 21.518350] type=1505 audit(1269362661.131:9): operation="profile_replace" pid=864 name=/usr/sbin/tcpdump Mar 23 10:44:21 opt2 kernel: [ 21.597857] tg3 0000:02:09.0: firmware: requesting tigon/tg3_tso.bin Mar 23 10:44:21 opt2 kernel: [ 21.614472] tg3 0000:02:09.0: wake-up capability disabled by ACPI Mar 23 10:44:21 opt2 kernel: [ 21.614481] tg3 0000:02:09.0: PME# disabled Mar 23 10:44:21 opt2 kernel: [ 21.680769] ADDRCONF(NETDEV_UP): eth0: link is not ready Mar 23 10:44:21 opt2 init: apport pre-start process (1050) terminated with status 1 Mar 23 10:44:21 opt2 init: apport post-stop process (1063) terminated with status 1 Mar 23 10:44:21 opt2 cron[1054]: (CRON) INFO (pidfile fd = 3) Mar 23 10:44:21 opt2 cron[1068]: (CRON) STARTUP (fork ok) Mar 23 10:44:22 opt2 cron[1068]: (CRON) INFO (Running @reboot jobs) Mar 23 10:44:22 opt2 kernel: [ 23.040279] e100: eth2 NIC Link is Up 100 Mbps Full Duplex Mar 23 10:44:22 opt2 kernel: [ 23.041074] ADDRCONF(NETDEV_CHANGE): eth2: link becomes ready Mar 23 10:44:22 opt2 ntpdate[919]: step time server 91.189.94.4 offset -0.564254 sec Mar 23 10:44:23 opt2 kernel: [ 24.630033] tg3: eth1: Link is up at 1000 Mbps, full duplex. Mar 23 10:44:23 opt2 kernel: [ 24.630040] tg3: eth1: Flow control is on for TX and on for RX. Mar 23 10:44:23 opt2 kernel: [ 24.630720] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready Mar 23 10:44:26 opt2 kernel: [ 27.320046] tg3: eth0: Link is up at 1000 Mbps, full duplex. Mar 23 10:44:26 opt2 kernel: [ 27.320054] tg3: eth0: Flow control is on for TX and on for RX. Mar 23 10:44:26 opt2 kernel: [ 27.320718] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready Mar 23 10:44:26 opt2 ntpdate[1131]: step time server 91.189.94.4 offset 0.000606 sec Mar 23 10:44:27 opt2 kernel: [ 28.585782] tg3: eth0: Link is down. Mar 23 10:44:30 opt2 kernel: [ 30.978660] tg3: eth0: Link is up at 1000 Mbps, full duplex. Mar 23 10:44:30 opt2 kernel: [ 30.978664] tg3: eth0: Flow control is on for TX and on for RX. Mar 23 10:44:31 opt2 kernel: [ 32.098774] tg3: eth0: Link is down. Mar 23 10:44:32 opt2 kernel: [ 33.800012] eth2: no IPv6 routers present Mar 23 10:44:33 opt2 kernel: [ 34.910015] eth1: no IPv6 routers present Mar 23 10:44:36 opt2 kernel: [ 37.560017] eth0: no IPv6 routers present -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
