Changes: - whole tree has been re-based on top of 2.6.33 kernel - individual patches adding 32-bit PIO support to PATA drivers have been combined together - duplicated ata_timing_* EXPORT_SYMBOLs have been removed ( As a net result the total number of patches kept in atang tree has decreased from 261 to 224. ) The standalone patch for vanilla 2.6.33 is now also available at: http://www.kernel.org/pub/linux/kernel/people/bart/atang/patch-2.6.33-atang1.bz2 atang tree highlights: * Support for more ATA controllers (SIL3x12 SATA on IXP425 platform, Cirrus Logic's EP93xx PATA, Altera CompactFlash PATA and Samsung S3C PATA) * Enhanced SSD detection so block layer optimizations can be applied to many more SSD devices * Fix to make SATA Asynchronous Notification work on distributions using HAL (-> almost all current distributions) * Fix for Promise PATA UDMA problems * ide2libata framework * Various bug fixes, cleanups & other improvements for both libata/ide subsystems (please see the ChangeLog below for details) The following changes since commit 60b341b778cc2929df16c0a504c91621b3c6a4ad: Linus Torvalds (1): Linux 2.6.33 are available in the git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/bart/misc.git atang-v5.0 Bartlomiej Zolnierkiewicz (203): ata_piix: unify code for programming PIO and MWDMA timings libata: make ata_sff_data_xfer_noirq() work with 32-bit PIO libata: add 32-bit PIO support to PATA drivers (part 1) libata: add 32-bit PIO support to PATA drivers (part 2) pata_sch: add 32-bit PIO support pata_artop: fix chipsets naming pata_artop: add Power Management support pata_artop: unify ->prereset methods pata_artop: remove dead 34MHz PCI clock support pata_atiixp: no need to program PIO timings for MWDMA pata_atiixp: add MWDMA0 support pata_atiixp: remove custom BMDMA methods pata_atiixp: add proper ->prereset method pata_efar: fix register naming used in efar_set_piomode() pata_efar: unify code for programming PIO and MWDMA timings pata_cmd64x: add enablebits checking pata_cmd64x: add cmd64x_fixup() pata_cs5535: no need to program PIO0 timings during device init pata_hpt366: add enablebits checking pata_hpt366: add hpt36x_find_mode() helper pata_hpt3x2n: add enablebits checking pata_it8213: add UDMA100 and UDMA133 support pata_it8213: fix register naming used in it8213_set_piomode() pata_it8213: unify code for programming PIO and MWDMA timings pata_legacy: do not probe extra ports automatically if PCI is not present pata_legacy: unify QDI ->set_piomode methods pata_legacy: use PIO mask defines libata: remove no longer needed pata_qdi driver libata: remove no longer needed pata_winbond driver pata_oldpiix: unify code for programming PIO and MWDMA timings pata_pdc2027x: add Power Management support pata_pdc202xx_old: Power Management fix pata_radisys: unify code for programming PIO and MWDMA timings pata_rdc: unify code for programming PIO and MWDMA timings pata_scc: add proper cable detection method pata_serverworks: use standard cable detection methods pata_serverworks: add serverworks_fixup() pata_sl82c105: add Power Management support pata_via: add via_fixup() libata: add ata_mwdma_to_pio() inline helper libata: add ->init_host method pata_cmd640: document known issues pata_cypress: document known issues pata_pdc202xx_old: document known issues icside: bring back ->maskproc method scc_pata: fix module unloading add PATA host controller support for Cirrus Logic's EP93xx CPUs (v2) libata: fix CFA handling in ide_timing_compute() pata_ali: documentation fixes pata_ali: cleanup ali_set_piomode() pata_amd: remove bogus code from timing_setup() pata_atiixp: remove superfluous wrapper function pata_atiixp: add locking for parallel scanning pata_atiixp: enable parallel scan pata_cmd64x: fix PIO setup pata_cmd64x: fix handling of address setup timings pata_cmd64x: cmd648_bmdma_stop() fix pata_cmd64x: remove unused definitions pata_cs5520: convert to use ->init_host method pata_cs5535: use correct values for PIO1 and PIO2 data timings pata_cypress: fix PIO timings underclocking pata_efar: always program master_data before slave_data pata_efar: fix secondary port support pata_efar: add locking for parallel scanning pata_efar: enable parallel scan pata_serverworks: fix PIO setup for the second channel pata_serverworks: fix error message pata_serverworks: cleanup cable detection pata_via: fix address setup timings underlocking pata_via: store UDMA masks in via_isa_bridges table ide: fix for ide_timing quantisation errors ide: use standard timing for XFER_PIO_SLOW mode in ide_timing_compute() alim15x3: fix PIO timings calculations alim15x3: add ali_fifo_control() helper alim15x3: remove superfluous locking from ali_set_pio_mode() alim15x3: cleanup ali_cable_detect() amd74xx: don't change UDMA settings when programming PIO timings cmd64x: fix PIO and MWDMA timings calculations cmd64x: remove superfluous checks from cmd64x_set_dma_mode() cy82c693: fix PIO timings calculations cy82c693: remove stale driver history opti621: remove stale driver history pdc202xx_old: add ->init_hwif method serverworks: cleanup svwks_udma_filter() serverworks: add missing pci_dev_put() call via82cxxx: vx855 is a single channel controller ide: add SATA cable detection support via82cxxx: fix SATA cable detection via82cxxx: workaround h/w bugs via82cxxx: add support for vt8261 and future chips via82cxxx: add support for VT6415 PCIE PATA IDE Host Controller via82cxxx: fix UDMA settings programming ide: add drive->pio_mode field ide: add drive->dma_mode field ide: change ->set_pio_mode method parameters ide: change ->set_dma_mode method parameters ide-timings: use ->pio_mode value to determine fastest PIO speed alim15x3: fix handling of address setup timings alim15x3: fix handling of command timings alim15x3: fix handling of DMA timings alim15x3: fix handling of UDMA enable bit amd74xx: use ->pio_mode value to determine pair device speed cmd64x: fix handling of address setup timings cs5535: use ->pio_mode value to determine pair device speed cs5536: use ->pio_mode value to determine pair device speed it821x: use ->pio_mode value to determine pair device speed palm_bk3710: use ->pio_mode value to determine pair device speed siimage: use ->pio_mode value to determine pair device speed tx493xide: use ->pio_mode value to determine pair device speed via82cxxx: use ->pio_mode value to determine pair device speed ide: make ide_get_best_pio_mode() static libata: ata_timing_compute() fixup ide: ide_timing_compute() fixup piix: add new short cable IDs libata: CodingStyle fixes for ATA timings code libata: move ATA timings code to ata-timings.c ata: make ATA timings code independent of libata ata: enable XFER_PIO_SLOW mode in ata_timing table ide: switch to generic ATA timings code pata_pcmcia: move IDs table to pata_pcmcia.h ide-cs: use pata_pcmcia.h ata_piix: factor out short cable detection code to ich_short_ata40() ata_piix: move short cable handling to ata_piix.h piix: use ata_piix.h pata_ali: move short cable handling to pata_ali.h alim15x3: use pata_ali.h pata_sis: move short cable handling to pata_sis.h sis5513: use pata_sis.h pata_via: move short cable handling to pata_via.h via82cxxx: use pata_via.h ide: split host->dev table ide: add hwif->port_no field ide: add hwif->udma_mask field ide: add hwif->private_data field ide: add drive->devno field ide: add drive->class field ide: change ->cable_detect method return type to 'int' it8213: always program control bits piix: always program control bits slc90e66: always program control bits add ide2libata header file ata_piix: move code to be re-used by ide2libata to ata_piix.h piix: convert to ide2libata pata_ali: move code to be re-used by ide2libata to pata_ali.h alim15x3: convert to ide2libata pata_amd: move code to be re-used by ide2libata to pata_amd.h amd74xx: convert to ide2libata pata_artop: move code to be re-used by ide2libata to pata_artop.h aec62xx: convert to ide2libata pata_atiixp: move code to be re-used by ide2libata to pata_atiixp.h atiixp: convert to ide2libata pata_cmd64x: documentation fix pata_cmd64x: move code to be re-used by ide2libata to pata_cmd64x.h pata_cmd64x: convert to ide2libata pata_cs5520: move code to be re-used by ide2libata to pata_cs5520.h cs5520: convert to ide2libata pata_cs5530: move code to be re-used by ide2libata to pata_cs5530.h cs5530: convert to ide2libata pata_cs5535: move code to be re-used by ide2libata to pata_cs5535.h cs5535: convert to ide2libata pata_cypress: move code to be re-used by ide2libata to pata_cypress.h cy82c693: convert to ide2libata pata_efar: move code to be re-used by ide2libata to pata_efar.h slc90e66: convert to ide2libata pata_it8213: move code to be re-used by ide2libata to pata_it8213.h it8213: convert to ide2libata pata_it821x: move code to be re-used by ide2libata to pata_it821x.h it821x: convert to ide2libata pata_pdc202xx_old: move code to be re-used by ide2libata to pata_pdc202xx_old.h pdc202xx_old: convert to ide2libata pata_sc1200: move code to be re-used by ide2libata to pata_sc1200.h sc1200: convert to ide2libata pata_serverworks: move cable handling to pata_serverworks.h serverworks: convert to ide2libata pata_sl82c105: move code to be re-used by ide2libata to pata_sl82c105.h sl82c105: convert to ide2libata pata_triflex: move code to be re-used by ide2libata to pata_triflex.h triflex: convert to ide2libata pata_via: factor out code for finding ISA bridge pata_via: move code to be re-used by ide2libata to pata_via.h via82cxxx: convert to ide2libata pata_cs5536: forward port changes from cs5536 pata_sil680: CodingStyle fixes siimage: cleanup I/O helpers piix: move documentation to ata_piix.h ide2libata: add missing credits pata_cs5536: move code to be re-used by ide2libata to pata_cs5536.h cs5536: convert to ide2libata pata_sil680: move code to be re-used by ide2libata to pata_sil680.h siimage: convert to ide2libata pata_opti: move code to be re-used by ide2libata to pata_opti.h opti621: convert to ide2libata ide: remove obsolete /proc/ide/hdx/ settings ide: remove obsolete /proc/ide/ interface move host drivers for VLB IDE controllers to staging/out ide: remove hwif_chipset_t type pata_pdc202xx_old: fix UDMA mode for Promise UDMA33 cards pata_pdc202xx_old: fix UDMA mode for PDC2026x chipsets pata_pdc202xx_old: update documentation libata: pass host flags into __ata_pci_sff_init_one() helper pata_oldpiix: add locking for parallel scanning pata_oldpiix: enable parallel scan libata: enhanced SSD detection H Hartley Sweeten (1): arm/ep93xx: platform support for EP93xx IDE Krzysztof Halasa (1): sata_sil: IXP425 workaround Mikulas Patocka (1): via82cxxx: don't use UDMA on VIA UDMA33 controller with Transcend SSD Robert Hancock (1): scsi: properly export media change notification capability in block device flags Russell King (1): Fix Promise UDMA33 IDE driver (pdc202xx_old) Sergei Shtylyov (6): hpt366: add debounce delay to cable_detect() method pata_hpt3x2n: always stretch UltraDMA timing pata_hpt{37x|3x2n}: unify mode programming pata_hpt366: remove redundant code pata_hpt{37x|3x2n}: improve timing register documentation pata_hpt366: remove irrelevant TODO Thomas Abraham (8): S3C64XX: Add physical address definition for Compact Flash controller. S3C64XX: Add MEM_SYS_CFG register definition. S3C64XX: Add IDE controller register definitions. S3C64XX: Add clock source definition for IDE controller. S3C64XX: Add platform data and driver resources for IDE controller driver. S3C6410: Add platform data for S3C IDE controller driver S3C64XX: Include IDE device code in compilation. drivers/staging: Add Samsung S3C IDE controller driver Thomas Chou (1): drivers/staging: New PATA driver for Altera CompactFlash. Wolfram Sang (1): ide/ide-cs: fix order of releasing resources arch/arm/mach-ep93xx/core.c | 85 +++ arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h | 1 + arch/arm/mach-ep93xx/include/mach/platform.h | 3 + arch/arm/mach-s3c6400/include/mach/map.h | 4 + arch/arm/mach-s3c6410/mach-smdk6410.c | 14 +- arch/arm/plat-s3c/include/plat/devs.h | 1 + arch/arm/plat-s3c/include/plat/ide.h | 36 + arch/arm/plat-s3c/include/plat/regs-ide.h | 56 ++ arch/arm/plat-s3c64xx/Makefile | 1 + arch/arm/plat-s3c64xx/clock.c | 6 + arch/arm/plat-s3c64xx/dev-ide.c | 88 +++ arch/arm/plat-s3c64xx/include/plat/regs-clock.h | 3 + drivers/ata/Kconfig | 32 +- drivers/ata/Makefile | 5 +- drivers/ata/ata-timings.c | 178 +++++ drivers/ata/ata_piix.c | 353 +---------- drivers/ata/ata_piix.h | 324 +++++++++ drivers/ata/libata-core.c | 177 +----- drivers/ata/libata-scsi.c | 18 +- drivers/ata/libata-sff.c | 14 +- drivers/ata/pata_ali.c | 294 +-------- drivers/ata/pata_ali.h | 326 +++++++++ drivers/ata/pata_amd.c | 139 +---- drivers/ata/pata_amd.h | 94 +++ drivers/ata/pata_artop.c | 330 ++-------- drivers/ata/pata_artop.h | 293 ++++++++ drivers/ata/pata_at32.c | 8 +- drivers/ata/pata_at91.c | 18 +- drivers/ata/pata_atiixp.c | 200 +----- drivers/ata/pata_atiixp.h | 116 ++++ drivers/ata/pata_atp867x.c | 5 +- drivers/ata/pata_cmd640.c | 36 +- drivers/ata/pata_cmd64x.c | 260 +------- drivers/ata/pata_cmd64x.h | 246 +++++++ drivers/ata/pata_cs5520.c | 115 +--- drivers/ata/pata_cs5520.h | 60 ++ drivers/ata/pata_cs5530.c | 205 +------ drivers/ata/pata_cs5530.h | 185 +++++ drivers/ata/pata_cs5535.c | 127 +---- drivers/ata/pata_cs5535.h | 114 ++++ drivers/ata/pata_cs5536.c | 191 +------ drivers/ata/pata_cs5536.h | 195 ++++++ drivers/ata/pata_cypress.c | 91 +--- drivers/ata/pata_cypress.h | 108 +++ drivers/ata/pata_efar.c | 179 +----- drivers/ata/pata_efar.h | 161 +++++ drivers/ata/pata_ep93xx.c | 776 +++++++++++++++++++++ drivers/ata/pata_hpt366.c | 120 ++-- drivers/ata/pata_hpt37x.c | 172 +++--- drivers/ata/pata_hpt3x2n.c | 129 ++-- drivers/ata/pata_hpt3x3.c | 32 +- drivers/ata/pata_icside.c | 4 +- drivers/ata/pata_it8213.c | 189 +----- drivers/ata/pata_it8213.h | 157 +++++ drivers/ata/pata_it821x.c | 354 +---------- drivers/ata/pata_it821x.h | 337 ++++++++++ drivers/ata/pata_jmicron.c | 2 +- drivers/ata/pata_legacy.c | 176 ++--- drivers/ata/pata_ninja32.c | 30 +- drivers/ata/pata_ns87410.c | 7 +- drivers/ata/pata_ns87415.c | 34 +- drivers/ata/pata_octeon_cf.c | 4 +- drivers/ata/pata_oldpiix.c | 106 +-- drivers/ata/pata_opti.c | 92 +--- drivers/ata/pata_opti.h | 141 ++++ drivers/ata/pata_pcmcia.c | 67 +-- drivers/ata/pata_pcmcia.h | 66 ++ drivers/ata/pata_pdc2027x.c | 24 +- drivers/ata/pata_pdc202xx_old.c | 153 ++--- drivers/ata/pata_pdc202xx_old.h | 121 ++++ drivers/ata/pata_qdi.c | 366 ---------- drivers/ata/pata_radisys.c | 74 +-- drivers/ata/pata_rdc.c | 106 +-- drivers/ata/pata_rz1000.c | 2 + drivers/ata/pata_sc1200.c | 110 +--- drivers/ata/pata_sc1200.h | 112 +++ drivers/ata/pata_scc.c | 14 +- drivers/ata/pata_sch.c | 2 +- drivers/ata/pata_serverworks.c | 336 +--------- drivers/ata/pata_serverworks.h | 303 +++++++++ drivers/ata/pata_sil680.c | 228 +------- drivers/ata/pata_sil680.h | 284 ++++++++ drivers/ata/pata_sis.c | 34 +- drivers/ata/pata_sis.h | 30 + drivers/ata/pata_sl82c105.c | 112 +--- drivers/ata/pata_sl82c105.h | 110 +++ drivers/ata/pata_triflex.c | 74 +-- drivers/ata/pata_triflex.h | 69 ++ drivers/ata/pata_via.c | 334 +--------- drivers/ata/pata_via.h | 269 ++++++++ drivers/ata/pata_winbond.c | 282 -------- drivers/ata/sata_sil.c | 50 +- drivers/ide/Kconfig | 84 +--- drivers/ide/Makefile | 15 - drivers/ide/aec62xx.c | 175 +----- drivers/ide/alim15x3.c | 286 +-------- drivers/ide/amd74xx.c | 92 +-- drivers/ide/at91_ide.c | 15 +- drivers/ide/atiixp.c | 128 +---- drivers/ide/au1xxx-ide.c | 10 +- drivers/ide/buddha.c | 1 - drivers/ide/cmd640.c | 8 +- drivers/ide/cmd64x.c | 228 +------ drivers/ide/cs5520.c | 50 +-- drivers/ide/cs5530.c | 152 +---- drivers/ide/cs5535.c | 145 +---- drivers/ide/cs5536.c | 187 +----- drivers/ide/cy82c693.c | 236 +------- drivers/ide/delkin_cb.c | 1 - drivers/ide/falconide.c | 1 - drivers/ide/gayle.c | 1 - drivers/ide/hpt366.c | 29 +- drivers/ide/icside.c | 69 ++- drivers/ide/ide-cd.c | 54 -- drivers/ide/ide-cs.c | 92 +--- drivers/ide/ide-devsets.c | 6 +- drivers/ide/ide-disk.c | 3 - drivers/ide/ide-disk.h | 9 - drivers/ide/ide-disk_proc.c | 174 ----- drivers/ide/ide-dma.c | 2 +- drivers/ide/ide-floppy.c | 3 - drivers/ide/ide-floppy.h | 9 - drivers/ide/ide-floppy_proc.c | 45 -- drivers/ide/ide-gd.c | 18 - drivers/ide/ide-generic.c | 1 - drivers/ide/ide-h8300.c | 1 - drivers/ide/ide-iops.c | 2 +- drivers/ide/ide-pnp.c | 1 - drivers/ide/ide-probe.c | 16 +- drivers/ide/ide-proc.c | 789 ---------------------- drivers/ide/ide-tape.c | 98 --- drivers/ide/ide-timings.c | 211 ------ drivers/ide/ide-xfer-mode.c | 43 +- drivers/ide/ide.c | 8 +- drivers/ide/ide_platform.c | 1 - drivers/ide/it8172.c | 14 +- drivers/ide/it8213.c | 144 +---- drivers/ide/it821x.c | 377 +---------- drivers/ide/jmicron.c | 8 +- drivers/ide/macide.c | 1 - drivers/ide/opti621.c | 185 +----- drivers/ide/palm_bk3710.c | 22 +- drivers/ide/pdc202xx_new.c | 12 +- drivers/ide/pdc202xx_old.c | 101 +--- drivers/ide/piix.c | 266 +------- drivers/ide/pmac.c | 18 +- drivers/ide/q40ide.c | 1 - drivers/ide/rapide.c | 1 - drivers/ide/sc1200.c | 121 +---- drivers/ide/scc_pata.c | 27 +- drivers/ide/serverworks.c | 311 +-------- drivers/ide/setup-pci.c | 6 +- drivers/ide/sgiioc4.c | 3 +- drivers/ide/siimage.c | 342 +--------- drivers/ide/sis5513.c | 35 +- drivers/ide/sl82c105.c | 113 +--- drivers/ide/slc90e66.c | 119 +--- drivers/ide/tc86c001.c | 11 +- drivers/ide/triflex.c | 61 +-- drivers/ide/tx4938ide.c | 10 +- drivers/ide/tx4939ide.c | 13 +- drivers/ide/via82cxxx.c | 349 +++------- drivers/scsi/sd.c | 2 + drivers/scsi/sr.c | 2 + drivers/staging/Kconfig | 6 + drivers/staging/Makefile | 3 + drivers/staging/ide-vlb/Kconfig | 69 ++ drivers/staging/ide-vlb/Makefile | 7 + drivers/staging/ide-vlb/TODO | 5 + drivers/{ide => staging/ide-vlb}/ali14xx.c | 6 +- drivers/{ide => staging/ide-vlb}/dtc2278.c | 5 +- drivers/{ide => staging/ide-vlb}/ht6560b.c | 23 +- drivers/{ide => staging/ide-vlb}/ide-4drives.c | 1 - drivers/{ide => staging/ide-vlb}/qd65xx.c | 15 +- drivers/{ide => staging/ide-vlb}/qd65xx.h | 0 drivers/{ide => staging/ide-vlb}/umc8672.c | 6 +- drivers/staging/pata_altera_cf/Kconfig | 11 + drivers/staging/pata_altera_cf/Makefile | 1 + drivers/staging/pata_altera_cf/TODO | 5 + drivers/staging/pata_altera_cf/pata_altera_cf.c | 582 ++++++++++++++++ drivers/staging/s3c-ide/Kconfig | 8 + drivers/staging/s3c-ide/Makefile | 1 + drivers/staging/s3c-ide/TODO | 6 + drivers/staging/s3c-ide/s3c-ide.c | 822 +++++++++++++++++++++++ include/linux/ata.h | 54 ++ include/linux/ide.h | 163 +---- include/linux/ide2libata.h | 17 + include/linux/libata.h | 52 +-- 188 files changed, 8584 insertions(+), 11547 deletions(-) create mode 100644 arch/arm/plat-s3c/include/plat/ide.h create mode 100644 arch/arm/plat-s3c/include/plat/regs-ide.h create mode 100644 arch/arm/plat-s3c64xx/dev-ide.c create mode 100644 drivers/ata/ata-timings.c create mode 100644 drivers/ata/ata_piix.h create mode 100644 drivers/ata/pata_ali.h create mode 100644 drivers/ata/pata_amd.h create mode 100644 drivers/ata/pata_artop.h create mode 100644 drivers/ata/pata_atiixp.h create mode 100644 drivers/ata/pata_cmd64x.h create mode 100644 drivers/ata/pata_cs5520.h create mode 100644 drivers/ata/pata_cs5530.h create mode 100644 drivers/ata/pata_cs5535.h create mode 100644 drivers/ata/pata_cs5536.h create mode 100644 drivers/ata/pata_cypress.h create mode 100644 drivers/ata/pata_efar.h create mode 100644 drivers/ata/pata_ep93xx.c create mode 100644 drivers/ata/pata_it8213.h create mode 100644 drivers/ata/pata_it821x.h create mode 100644 drivers/ata/pata_opti.h create mode 100644 drivers/ata/pata_pcmcia.h create mode 100644 drivers/ata/pata_pdc202xx_old.h delete mode 100644 drivers/ata/pata_qdi.c create mode 100644 drivers/ata/pata_sc1200.h create mode 100644 drivers/ata/pata_serverworks.h create mode 100644 drivers/ata/pata_sil680.h create mode 100644 drivers/ata/pata_sis.h create mode 100644 drivers/ata/pata_sl82c105.h create mode 100644 drivers/ata/pata_triflex.h create mode 100644 drivers/ata/pata_via.h delete mode 100644 drivers/ata/pata_winbond.c delete mode 100644 drivers/ide/ide-disk_proc.c delete mode 100644 drivers/ide/ide-floppy_proc.c delete mode 100644 drivers/ide/ide-proc.c delete mode 100644 drivers/ide/ide-timings.c create mode 100644 drivers/staging/ide-vlb/Kconfig create mode 100644 drivers/staging/ide-vlb/Makefile create mode 100644 drivers/staging/ide-vlb/TODO rename drivers/{ide => staging/ide-vlb}/ali14xx.c (97%) rename drivers/{ide => staging/ide-vlb}/dtc2278.c (97%) rename drivers/{ide => staging/ide-vlb}/ht6560b.c (98%) rename drivers/{ide => staging/ide-vlb}/ide-4drives.c (98%) rename drivers/{ide => staging/ide-vlb}/qd65xx.c (96%) rename drivers/{ide => staging/ide-vlb}/qd65xx.h (100%) rename drivers/{ide => staging/ide-vlb}/umc8672.c (97%) create mode 100644 drivers/staging/pata_altera_cf/Kconfig create mode 100644 drivers/staging/pata_altera_cf/Makefile create mode 100644 drivers/staging/pata_altera_cf/TODO create mode 100644 drivers/staging/pata_altera_cf/pata_altera_cf.c create mode 100644 drivers/staging/s3c-ide/Kconfig create mode 100644 drivers/staging/s3c-ide/Makefile create mode 100644 drivers/staging/s3c-ide/TODO create mode 100644 drivers/staging/s3c-ide/s3c-ide.c create mode 100644 include/linux/ide2libata.h -- To unsubscribe from this list: send the line "unsubscribe linux-ide" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
