Re: SuperMicro X8DTL-6F motherboard, Intel ICH10 SATA, SiI3726 SATA port multiplier

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/23/2010 06:02 AM, Todd Pfaff wrote:
> Despite the appearance of partial success in my syslog messages below (ie.
> PMP appeared to sorta kinda be trying to work, almost), I've since read
> some more that leads me to believe that Intel ICH10 does not support PMP.
> And Intel authoritatively says so here:
> 
>   http://www.intel.com/Assets/PDF/datasheet/319973.pdf
> 
>     page 538, section 14.4.1.1, Bit 17
> 
>     Supports Port Multiplier (PMS) - R/WO.  ICH10 does not support port
>     multiplier.
>     NOTE: This bit must be set to 0.  Port multiplier is not supported by
>     ICH10.
> 
> So, I give up.  I edited the wiki page here accordingly since it was
> wrong:
> 
>   http://ata.wiki.kernel.org/index.php/SATA_hardware_features

Eh... some variants of ich8/9/10's definitely support PMP as indicated
by the PMS bit.  Reverting the edit.

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Filesystems]     [Linux SCSI]     [Linux RAID]     [Git]     [Kernel Newbies]     [Linux Newbie]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Samba]     [Device Mapper]

  Powered by Linux